3 best rhino of four seasons

Product description

Maier Fender Flares Are Made of Tough, Vacuum-Formed, High-Density Polyethylene

Colors Are OEM Color Matched

Come in Sets of 4 (2 Front, 2 Rear)

Fits the Following Yamaha Models:

RHINO 450 2006-2009

RHINO 660 2004-2007

RHINO 700 Fi 2008-2009

• New Maier Manufacturing Rhino Fndr Flrs 2" Txt Blk S/4
• Manufacturer Part Number: 49225-20 (Fender Flare)
• Item only fits specific models listed. The picture could be generic.
• Message us with VIN/HULL for fast fitment verification.
• Color: Blk

User questions & answers

Question:	do they have the mounting screws
Answer:	I purchased two of these separately from different suppliers. One of the tins arrived damaged. Perhaps a heavy box was placed on the padded envelope that the tin was shipped in because on one side, the lid was squashed down past the extended edge on the bottom that the lid is supposed to rest on. It will NOT open. However, i contacted customer service and will receive a refund. (The seller says it’s a risk free transaction in the item details.)
Question:	Would the fit a 2012 700 fi
Answer:	It does not screw on. But it does fit firmly. The lid does not fall off if you drop it. If I hold the tin upside down by the base and shake it vigorously the lid still does not come off.
Question:	are these 4 inch flares or 2 inch flares
Answer:	When your question came in, I happened to have a micrometer next to my desk, so I can be (excessively, probably) precise about this.The Book Dart I measured was 0.387 inches wide, 1.027 inches long, 0.021 inches thick at the exposed (folded) end, and the metal they are made of is 0.004 inches thick. So, when you use them, the tip of the arrow will be about 1 inch in from the edge of the page, and when the book is closed, you'll see a 0.387 inch long by 0.021 inch wide bit of metal visible.I've used them for years to mark key passages in books without marring the pages, and I just ordered a fresh tin this year.
Question:	Are these actually called a 4in flare because i see different adds fir 2in. And 4in. And sum answered say these are 2-3 but inly really give extra in
Answer:	The buckle is plastic.

Product description

Kolpin Rhino Grip - Double is for transporting gear safely and securely. Don't let rough terrain wreck havoc on your valuable gear. Rhino Grip's heavy-duty design will keep your firearm or other gear securely in place and cushion it from any jolts or shocks. The design provides superior gripping power and cushioning support that reduces side to side movement. Strong, flexible static grips and rubber straps securely hold tools and gear of various configurations. The possibilities are endless! Installation to ATV racks, rear truck windows and even UTV cabs & beds is easy thanks to the universal-fit design and included mounting hardware. For secure, convenient transport of your gun, bow, shovels, farm tools, or other gear, make it Rhino Grips.

• Features off-set mounting to maximize rack space; Sold as a pair
• Durable and flexible rubber grips designed to carry light-weight items. (Up to 15lbs.); Rubber Securing straps
• Designed to fit trucks, SUVs, ATVs, UTVs, RVs, trailers, pretty much anything.
• Drilling required to mount on some composite racks; Sold as a pair; Mount to any tubular or square bar from 5/8"-1-1/4" in diameter OR to any flat drillable surface;
• Available in 4 styles: Single (21500), Double (21505), Window Suction Cup (21520) and Window/Wall Mount Adhesive (21525)

User questions & answers

Question:	Will this fit on a 2001 honda recon
Answer:	I don't have that ATV so I wouldn't know. I will say, I would imagine they will fit any rack with round (and probably square too) tubing. I put mine on the front rack of my 4 wheeler. However, they were a pain in the ass to mount. Logic tells me it would've been much easier to install them on the rack if the rack were removed, which would entail more work. There wasn't much clearance between the rack and fenders. I didn't do that and I still had to go buy different length bolts/nuts. But overcoming a little obstacle, they're mounted securely and I have total satisfaction. Such is life. :)
Question:	Do these adjust angle at all? The rack on my ATV angles in a little so they need to turn a little to be in line
Answer:	You would have to shim it, depends on how severe the angle is though too. I would suggest buying your own mounting hardware.
Question:	Do these come with straps already
Answer:	yes, rubber straps for each one.
Question:	Does the mounting hardware & rubber straps come with this or do you have to buy them separately
Answer:	Hardware and hold down straps come with this product

Product features

Kolpin Rhino Grip - Double - 21505

Strap down and secure your light-weight gear - Single Version Easily secure your light-weight gear to any vehicle, wall or flat surface.

• Rubber over-molded flexible nylon construction
• Offset configuration to maximize rack space
• Mounts to tubular or square bars from 5/8”- 1-1/4” in diameter or to flat, drillable surfaces
• Utilize Rhino grips in any vehicle! They are designed to fit ATVs, UTVs, RVs, SUVs, trucks, trailers, pretty much anything that has a smooth surface!
• 4-corner bolting system
• Double version has 15 lbs. weight capacity and includes 4 rubber straps

• Suitable for desert, mud, dirt and rock applications. Truly, a great all terrain tire for your ATV / UTV
• Tread depth: 0.79", 25x8.00-12 (Rim Width: 6.5", 370lbs@7psi), 25x10.00-12 (Rim Width: 8", 420lbs@7psi)
• Heavy 6 ply rated nylon construction resists punctures and abrasions; Additional shoulder lugs protect rim and sidewall, Cleaning action for better traction over rough terrain
• Quality construction offers a significant smooth ride over rough trails
• 2x front 25x8-12 atv tires + 2x rear 25x10-12 tires, Rim(s) NOT included

User questions & answers

Question:	Will this tires work on a 4X4 style four wheeler , I notice the 2 rear tires look flat and a little smaller in height
Answer:	These things are about half the size of any other dehooker I have had. Very disappointed. I didn't throw them overboard only because I don't litter so I don't know if they float.
Question:	Honda rancher 4×4 front and rear tires atv
Answer:	Yes, R05 Fish Hook Remover is made of stainless steel and the handle is ABS plastic.
Question:	Is the tread depth accurate ? Its listed as .79 inch
Answer:	Works good for sabiki. That's what U use mine for.
Question:	Fit 2016 polaris sportsman
Answer:	Yes, the bookdarts will remain indefinitely on the page. When I finish reading a book I normally leave the dart in the book for future use. The only problem is with older books say before say 1960 the pages are much thicker so the darts don't slip on as easily as with modern books where the paper is thinner and smoother. I hope this helps. I my opinion one of the greatest inventions since sliced bread ;-)