8 best line hose for hondas
Line hoses for Honda motorcycles refer to specific components used in the hydraulic brake or clutch systems of Honda motorcycles. These hoses play a crucial role in transmitting hydraulic fluid (brake fluid or clutch fluid) between various components, such as the master cylinder and the brake caliper or clutch lever and clutch actuator. Here are some key points about line hoses for Honda motorcycles:
Material: Honda motorcycle line hoses are typically made from high-quality materials such as reinforced rubber or stainless steel braided lines. The choice of material depends on the model and the specific requirements of the motorcycle.
Brake Lines: Brake line hoses in Honda motorcycles are essential for transmitting hydraulic pressure from the brake lever to the brake caliper. They play a critical role in ensuring that the brakes respond effectively and reliably when you apply pressure to the brake lever.
Clutch Lines: In motorcycles equipped with hydraulic clutches, clutch line hoses are responsible for transmitting hydraulic pressure from the clutch lever to the clutch actuator. This allows for smooth and precise clutch engagement and disengagement.
Compatibility: When purchasing line hoses for your Honda motorcycle, it's important to ensure that they are compatible with your specific model and year. Different Honda models may have variations in hose length, fittings, and attachment points.
Braided vs. Rubber: Some Honda motorcycles may come equipped with stainless steel braided brake lines, which offer improved durability and resistance to expansion under pressure compared to traditional rubber lines. Braided lines can provide enhanced brake feel and performance.
Maintenance: Line hoses should be regularly inspected for signs of wear, damage, or leakage. Any compromised hoses should be replaced promptly to maintain the safety and performance of the motorcycle's brake and clutch systems.
Upgrades: Some motorcycle enthusiasts choose to upgrade their stock line hoses to aftermarket options for improved performance and aesthetics.Upgraded hoses may come in different colors and may be designed to offer better brake modulation and feel.
Installation: Replacing line hoses on a Honda motorcycle should be done carefully, ensuring that the hydraulic system is properly bled to remove any air bubbles. Improper installation can lead to brake or clutch performance issues.
DOT Compliance: When purchasing line hoses for your Honda motorcycle, look for products that meet Department of Transportation (DOT) standards for safety and performance. DOT-compliant hoses have undergone testing to ensure they meet strict quality and safety standards.
Professional Installation: If you are not experienced in working with hydraulic brake or clutch systems, it's advisable to have line hoses installed by a qualified technician or mechanic to ensure proper functionality and safety.
Line hoses for Honda motorcycles are crucial components that contribute to the safety and performance of your bike. Regular inspection, maintenance, and, if necessary, replacement of these hoses are essential to keep your motorcycle's braking and clutch systems in top condition.
Below you can find our editor's choice of the best line hose for hondas on the market
OCPTY Power Steering Pressure Hose Complete Assembly Fits for 2008 2009 2010 for Honda Odyssey 53713SHJA02 Power Steering Lines
Product description
Compatible models:
2008-2010 for Honda Odyssey EX-L for Mini Passenger Van 4-Door
2008-2010 for Honda Odyssey EX for Mini Passenger Van 4-Door
2008 2010 for Honda Odyssey EXL for Mini Passenger Van 4-Door
2008-2010 for Honda Odyssey Touring for Mini Passenger Van 4-Door
2008-2010 for Honda Odyssey LX for Mini Passenger Van 4-Door
2008-2010 for Honda Odyssey DX for Mini Passenger Van 4-Door
2010 for Honda Odyssey NHL SE for Mini Passenger Van 4-Door
Package Includes:
1 X Power Steering Pressure Hose
- COMPATIBLE MODELS - Power Steering Pressure Line Hose Assembly for 2008 2009 2010 for Honda Odyssey
- REPLACE NUMBERS - 3401201 366103 55350 53713SHJA02
- WHY REPLACE - When the steering system shows signs of leakage or inconsistent power assist which means the power steering line for points of failure. Often times leaks will be found in the junctions between components or at the crimped connections between flexible and ridged sections
- WHY CHOOSE US - Affor Fordable directly compatible and built to last OCPTYs new OE power steering hose stand out as the for Smart option
- PLEASE NOTE - Please check car make model trim engine product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer
User questions & answers
| Question: | does it come with the O ring |
| Answer: | The barrel-shaped larger part seems to be made of a small PCV-like tube, very strong enclosed by nylon belt material. The nylon is stitched very well and would be very difficult to tear or break. You would probably break the door before the GoFit Door Anchor give out on you. |
53713-S9A-A04 Power Steering Pressure Line Hose Tube Assembly Fit Honda CRV SUV 2.4L 2002-2006
- A pressure line hose connects a power steering pump to the cylinders in an electronic power steering system. The pump routes pressurized power steering fluid into the steering rack, where it is used to control the steering wheel turn rate. Select the right replacement hose for your vehicle from our large inventory of the best power steering pressure line hoses for cars and trucks.
- Power steering pressure line hoses and return hoses can wear down over time and become corroded or develop leaks. Most high-pressure lines are metal, whereas low-pressure lines are made of rubber. Power steering hoses are exposed to high temperatures when the engine is running. The composition of power steering fluid and the pressure generated by a power steering pump can also degrade hoses over time.
- In addition to risking potential damage to the power steering system, a failed pressure line hose can eliminate steering assist and make any car or truck much more difficult to steer. Power steering fluid is also flammable and may ignite upon making contact with hot surfaces.
- Look for any signs of rust on a power steering pressure line hose and cracks or bulges in rubber hoses. If there are any indications of a leak, such as moisture on or near hoses, low fluid levels in the reservoir or a smell of burning fluid, you should replace the damaged hoses and refill the power steering fluid reservoir.
- This Power Steering Pressure Line Hose Fits for the Following Vehicles: 2002 2003 2004 2005 2006 Honda CR-V (2.4L Engine ONLY). Customers can find the product you need accurately according to the OE number. OE part number: 53713-S9A-A04, 53713-S9A-A03, 53713-S9A-A02, 53713S9AA04, 53713S9AA03, 53713S9AA02.
User questions & answers
| Question: | Is it work on a Honda Accord |
| Answer: | I believe so if you attach the TRS with a Caribener or a mountaineer clip. |
Product features
What is it?
A pressure line hose connects a power steering pump to the cylinders in an electronic power steering system. The pump routes pressurized power steering fluid into the steering rack, where it is used to control the steering wheel turn rate. Select the right replacement hose for your vehicle from our large inventory of the best power steering pressure line hoses for cars and trucks.
Power steering pressure line hoses and return hoses can wear down over time and become corroded or develop leaks. Most high-pressure lines are metal, whereas low-pressure lines are made of rubber. Power steering hoses are exposed to high temperatures when the engine is running. The composition of power steering fluid and the pressure generated by a power steering pump can also degrade hoses over time.
For exact years and models, please check compatibility.
2002 Honda CR-V 2.4L Engine
2003 Honda CR-V 2.4L Engine
2004 Honda CR-V 2.4L Engine
2005 Honda CR-V 2.4L Engine
2006 Honda CR-V 2.4L Engine
How to replace the Pressure Line Hose?
Open hood and locate power steering pump and reservoir. Check power steering fluid level.
Locate power steering pressure and return hoses. Inspect power steering hoses for leaks.
Place a drain pan under the pressure hose connection at the steering rack or gearbox.
Loosen and remove pressure hose fittings from the steering rack / gearbox and the power steering pump.
Install new power steering pressure hose, making sure to route it the same as the old hose. Do not over tighten the fitting threaded connections.
Fill power steering reservoir with manufacturer's recommended power steering fluid.
Start the engine to circulate the power steering fluid. Stop the engine and refill the reservoir.
Start the engine and turn the steering wheel from left to right. Check the steering hoses and rest of the power steering system for any leaks.
Turn off the engine and check the power steering fluid level. Add fluid if necessary. Do not overfill the reservoir / system.
Road test to verify the repair.
SCITOO Power Steering Hose for 2002 2003 2004 2005 2006 for Honda CR-V Power Steering Pressure Line Hose
Product description
Compatible Vehicles:
2002-2006 for Honda CR-V EX Sport Utility 4-Door
2005-2006 for Honda CR-V EX-L Sport Utility 4-Door
2002-2006 for Honda CR-V LX Sport Utility 4-Door
2005-2006 for Honda CR-V SE Sport Utility 4-Door
2002-2003 for Honda CR-V Base Sport Utility 4-Door
Reference numbers:
53713-S9A-A04
Package Includes:
1x Steering Pressure Hose Assembly As Picture Shown
- COMPATIABLE VEHICLES - for 2002 2003 2004 2005 2006 for Honda CR-V
- HOSE USAGE - Most power assist steering systems function by using hydraulic fluid under pressure to multiply the force applied by the driver to the steering wheel. To accomplish this, high pressure hydraulic hoses connect the power steering pump to the steering gear
- HOSE CHARACTERISTIC - A 100% brand new aftermarket replacement Steering Pressure Hose Assembly with premium quality. Adopted high quality metal and plastic that meet or exceed OEM requirements
- EASY INSTALLATION - Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation, easy to install and save time
- BUYER NOTICE - Please check picture,OE part number and fitment information to verify this is the correct one you need before purchasing
User questions & answers
| Question: | will this hose fit on a rd5 crv 2.0l k20a engine |
| Answer: | the anchor its a inch wide and length, not a square more like a circle. |
Part# 53713-S9A-A04 Power Steering Pressure Line Hose Tube Assembly For 2002-2006 Honda CRV SUV 2.4L
- A pressure line hose connects a power steering pump to the cylinders in an electronic power steering system. The pump routes pressurized power steering fluid into the steering rack, where it is used to control the steering wheel turn rate.
- This Power Steering Pressure Line Hose Fits for the Following Vehicles: 2002 2003 2004 2005 2006 Honda CR-V LX EX Base SE EX-L (2.4L Engine ONLY). Customers can find the product you need accurately according to the OE number. OEM replace part number: 53713-S9A-A04, 53713-S9A-A03, 53713-S9A-A02, 53713S9AA04, 53713S9AA03, 53713S9AA02.
- Power steering pressure line hoses and return hoses can wear down over time and become corroded or develop leaks. Most high-pressure lines are metal, whereas low-pressure lines are made of rubber. Power steering hoses are exposed to high temperatures when the engine is running. The composition of power steering fluid and the pressure generated by a power steering pump can also degrade hoses over time.
- In addition to risking potential damage to the power steering system, a failed pressure line hose can eliminate steering assist and make any car or truck much more difficult to steer. Power steering fluid is also flammable and may ignite upon making contact with hot surfaces.
- Look for any signs of rust on a power steering pressure line hose and cracks or bulges in rubber hoses. If there are any indications of a leak, such as moisture on or near hoses, low fluid levels in the reservoir or a smell of burning fluid, you should replace the damaged hoses and refill the power steering fluid reservoir. This power steering pressure line hose fits 02 03 04 05 06 years Honda cars.
User questions & answers
| Question: | Que garantia tiene este producto |
| Answer: | The knob on the end is roughly a 2" cube with a 4" double layer of strapping sewed together to fit above or below a door hinge, then another 4" of open loop in which to insert the tube. All told... 10". I measured it. If you were handy with a durable sewing machine, you could make it yourself, but I use the one I purchased almost every day. Very handy. |
Product features
What is the Power Steering Pressure Line Hose
A pressure line hose connects a power steering pump to the cylinders in an electronic power steering system. The pump routes pressurized power steering fluid into the steering rack, where it is used to control the steering wheel turn rate.
Power steering pressure line hoses and return hoses can wear down over time and become corroded or develop leaks. Most high-pressure lines are metal, whereas low-pressure lines are made of rubber. Power steering hoses are exposed to high temperatures when the engine is running. The composition of power steering fluid and the pressure generated by a power steering pump can also degrade hoses over time.
Power Steering Pressure Line Hose Problems
In addition to risking potential damage to the power steering system, a failed pressure line hose can eliminate steering assist and make any car or truck much more difficult to steer. Power steering fluid is also flammable and may ignite upon making contact with hot surfaces.
Look for any signs of rust on a power steering pressure line hose and cracks or bulges in rubber hoses. If there are any indications of a leak, such as moisture on or near hoses, low fluid levels in the reservoir or a smell of burning fluid, you should replace the damaged hoses and refill the power steering fluid reservoir.
Power Steering Pressure Line Hose Fits the Following Vehicles:
2002 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2002-2003 Honda CR-V Base Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
2003 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2003 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
2003 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2004 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
2002, 2004 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2005-2006 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
2005-2006 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2005-2006 Honda CR-V EX-L Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
2004 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2005-2006 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
2005-2006 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2005 Honda CR-V SE Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2006 Honda CR-V SE Sport Utility 4-Door 2.4L 2354CC l4 GAS DOHC Naturally Aspirated
2004 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
OCPTY Power Steering Pressure Hose 2003-2007 for Honda Accord, 2004-2008 for Acura TSX Power Steering Lines Complete Assembly
Product description
Compatible models:
2003-2007 for Honda Accord EX Coupe 2-Door
2003-2007 for Honda Accord EX Sedan 4-Door
2003-2007 for Honda Accord LX Coupe 2-Door
2003-2007 for Honda Accord LX Sedan 4-Door
2004-2008 for Acura TSX Base Sedan 4-Door
2007 for Honda Accord LX SE Coupe 2-Door
2007 for Honda Accord LX SE Sedan 4-Door
2007 for Honda Accord Special Edition Sedan 4-Door
2006-2007 for Honda Accord Value Package Sedan 4-Door
2006 for Honda Accord LX Special Edition Sedan 4-Door
2003-2005 for Honda Accord DX Sedan 4-Door
2005 for Honda Accord SE Coupe 2-Door
Package Includes:
1 X Power Steering Pressure Hose
- COMPATIBLE MODELS - Power Steering Pressure Hose Assembly for 2003 2004 2005 2006 2007 for Honda Accord, 2004 2005 2006 2007 2008 for Acura TSX
- REPLACE NUMBERS - 53713-SDC-A02, 53713SDCA02, 53713SDAA52, PSPH3026H, 53713SDAA01, 53713-SDA-A02, 53713-SDC-A01, 53713-SD-CA02, 37234, 50048, 73477,92160, 365538
- WHY REPLACE - When the steering system shows signs of leakage or inconsistent power assist, which means the power steering line for points of failure. Often times, leaks will be found in the junctions between components or at the crimped connections between flexible and ridged sections
- WHY CHOOSE US - Affor Fordable, directly compatible and built to last, OCPTYâ€s new OE power steering hose stand out as the for Smart option
- PLEASE NOTE - Please check car make model trim engine,product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer
User questions & answers
| Question: | Will the power steering hose leak |
| Answer: | I have bought Sunsong's pressure hose before, and it works well, but the wear resistance and cost performance are not as good as OCPTY's. I prefer to buy OCPTY 'spower steering tubes, because OCPTY 's steering hose have a longer service life than other power steering pressure hose |
| Question: | Is this for the 2.4L or the 3.0L engine |
| Answer: | Le quedó bien a mi carro.lo recomiendo . |
| Question: | How long is the warranty |
| Answer: | Yes |
| Question: | I'm hesitating whether to buy ocpty's power steering tube or sunsong's power steering pressure hose |
| Answer: | Sorry, it’s not for your car, you can find pressure line hose you need according to OE number 53713-S87-A04. |
SCITOO Line Hose Compatible for 2005 2006 2007 for Honda Odyssey Power Steering Pressure Line Hose 365543
- COMPATIABLE VEHICLES - for 2005 2006 2007 for Honda Odyssey
- HOSE USAGE - Most power assist steering systems function by using hydraulic fluid under pressure to multiply the force applied by the driver to the steering wheel. To accomplish this, high pressure hydraulic hoses connect the power steering pump to the steering gear
- HOSE CHARACTERISTIC - A 100% brand new aftermarket replacement Steering Pressure Hose Assembly with premium quality. Adopted high quality metal and plastic that meet or exceed OEM requirements
- EASY INSTALLATION - Power steering pressure return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation, easy to install and save time
- BUYER NOTICE - Please check picture,OE part number and fitment information to verify this is the correct one you need before purchasing
Product features
Step 1:
Identifying which power steering hose is leaking or broken is the first step in starting the replacement process. At the same time, you should remove any components that might be in your way.
Step 2:
Place the collecting pan under the spots where you are disconnecting this hose and power steering fluid reservoir. Once the collection pans are in place,disconnect the old hose and install your new one.
Step 3:
Also consider performing a flush when you have replaced your power steering hoses. Continuously fill your reservoir with new fluid to drain the power steering fluid into the oil pan.
Step 4:
Finally, you can re-install all other components you removed in reverse order. After wiping the surface, the installation is basically complete.
JEENDA 3-Feet Fuel Line Hose with 4 Clamps 91424-Z4F-801 Compatible with Honda GX390 GX110 GX120 GX140 GX160 GX200 Engine EG2500X Generator Parts
- Part Number:91424-Z4F-801 91424Z4F801
- Another Part Number:91424-Z5F-801, 91424-Z5F-802, 91424-Z5L-801, 95001-45003-60M
- Application:EG2500X Generator Parts;Honda GX110 GX120 GX140 GX160 GX200 4-Stroke Engine Motor Trimmer Brushcutter
- Package Include:1*3-Feet Fuel Line Hose+4*Clamp
Product features
JEENDA 3-Feet Fuel Line Hose Series
- Part Number:91424-Z4F-801 91424Z4F801
- Another Part Number:91424-Z5F-801, 91424-Z5F-802, 91424-Z5L-801, 95001-45003-60M
- compatible with:Honda GX110 GX120 GX140 GX160 GX200 4-Stroke Engine Motor Trimmer Brushcutter;EG2500X Generator Parts
- Package Include:1*3-Feet Fuel Line Hose;4*Clamp
AloneGoer 3 feet 1/8" 3/16" 0.22" 1/4" 5/16" ID Fuel Line Gas Tube Hose Compatible with Kawasaki EZGO Honda Suzuki Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle
Product description
Compatible with：
1/8" Fuel Line Gas Tube Hose Size: 3.5mm*7.5mm, length: 3 feet
3/16" Fuel Line Gas Tube Hose Size: 4.5mm*8.5mm, length: 3 feet
0.22"*0.4" Fuel Line Gas Tube Hose Size: 5.5mm*10.3mm, length: 3 feet
1/4" Fuel Line Gas Tube Hose Size: 6mm*12mm, length: 3 feet
5/16" Fuel Line Gas Tube Hose Size: 7.3mm*12.5mm, length: 3 feet
Replace Kawasaki EZGO Honda Polaris Suzuki Snow Mobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle ect. Power Equipment
Latest Reviews
View all
Edgestar Wine Cooler
- Updated: 04.05.2023
- Read reviews
Debt Consolidation Services
- Updated: 17.02.2023
- Read reviews
Bucky Travel Pillow For Kids
- Updated: 03.02.2023
- Read reviews
Sodial R Cpu Fans
- Updated: 12.05.2023
- Read reviews
Eye
- Updated: 13.05.2023
- Read reviews