12 best motorcycle turns
Motorcycle turns, also known as turns or cornering, are fundamental maneuvers for riders to navigate roads safely and efficiently.They involve several key aspects, including body positioning, throttle control, braking, and the use of turn signal assemblies, lenses, lights, and other related parts to communicate intentions with other road users.
Body Positioning: Proper body positioning is crucial when making turns on a motorcycle. Riders should lean into the turn while keeping their upper body upright, aligning their eyes with the direction of the turn. This helps maintain balance and control throughout the maneuver.
Throttle Control: Managing the throttle during a turn is essential for maintaining stability and control. Riders should roll on the throttle smoothly through the turn to maintain speed or accelerate gently if needed. Abrupt throttle inputs can lead to instability.
Braking: It's generally recommended not to use the brakes while actively turning, as this can destabilize the bike. Instead, riders should use proper braking techniques before entering the turn to adjust speed as necessary.
Turn Signal Assemblies: Turn signal assemblies on motorcycles consist of lights and lenses that indicate a rider's intention to turn or change lanes. They are typically located at the front and rear of the motorcycle. Activating the turn signal is essential to communicate intentions to other road users.
Lights and Lenses: Turn signal lights are usually amber or orange and are located on both the front and rear of the motorcycle. These lights, along with the accompanying lenses, help make the turn signals visible to other drivers, especially in low-light conditions or bad weather.
Parts and Maintenance: Regular maintenance of turn signal assemblies is important to ensure they function correctly. This includes checking bulbs, wiring, and connections to ensure proper illumination when signaling a turn. Damaged lenses or lights should be replaced promptly.
Motorcycle Powersports: The world of motorcycle powersports encompasses various motorcycle-related activities, including racing, touring, and off-road riding. Different types of motorcycles and riding styles may require specific techniques for making turns safely and efficiently.
In summary, making motorcycle turns safely involves a combination of proper body positioning, throttle control, and braking techniques. Additionally, the use of turn signal assemblies, lenses, lights, and other related parts is crucial to communicate intentions with other road users and enhance overall safety while riding. Regular maintenance of these components is essential for their reliable functionality.
Below you can find our editor's choice of the best motorcycle turns on the market- 【4PCS Motorcycle Indicators】Comes with 4PCS Turn Signal Lights, 12V Universal Suitable for Motorcycle Motorbike Scooter Quad Cruiser Off Road
- 【New Version Daytime Running Light, And Brake Light Function】New Version Running Light, The Daytime Running Light Will Scan Once When It Starts, Very Cool (Notice: The Turn Signal Will be Used First: When the Daytime Running Light or the Brake Light is Turn on, The Turn Signal is Also Turned on at the Same Time, Only the Turn Signal is Lit at This Time; When the Turn Signal is Turned off, The Daytime Running Light or the Brake Light Returns to its Original
- 【Unique Flowing LED Lighting Design】Amber Color and Flowing Mode, Great for Turn Signal and Indicators Usage
- 【Upgraded Version High Flexible Rubber Design】Snakeskin Style Handle, Curved High, Which Can Effectively Prevent Accidental Falls
- 【Easy to Install】Plug Type: Black Wire is Negative, Yellow Wire is Connected Turn Signal Light, White Wire is Connected to ACC or Instrument Light, Red Wire is Connected to Brake Light, Directly Mount to the Original Turn Signal Light Place
User questions & answers
Question: | Is there a way to not have the red led cancel out the yellow turn signal led when braking with the turn signal on |
Answer: | Yes it does |
Question: | do you need a new flasher relay with these lights |
Answer: | Yes it should no problem |
Question: | Like the signals, but a couple issues. The fronts have a "hiccup" in the flow sequence and the rear turn signals get overridden by the brake. Fix |
Answer: | Sorry, cannot help with this question. |
Question: | Does the size b have the new "mercedes" style start up sequence |
Answer: | Dear buyer Hello! Regarding your question "will this fit 1982 Honda urban express moped", we will answer it for you: This accessory is suitable for 50cc ~ 150cc models. Whether it is compatible with models depends on CDI and voltage regulator. This accessory is 6-pin CDI and 4-pin 5-wire voltage regulator! Please check whether your 1982 Honda urban express moped CDI and voltage regulator are the same. If they are the same, they are compatible! Happy shopping! |
Product features
New Version Running Light, Similar to Mercedes-Benz Startup Mode
Brake Light Function
Built-in 315 Side Light Beads
User questions & answers
Question: | Will they fit my 95 Yamaha xv1100 virago |
Answer: | Dear customer, Thank you for question. The turn signal will be used first: when the daytime running light or the brake light is turn on, the turn signal is also turned on at the same time, only the turn signal is lit at this time; when the turn signal is turned off, the daytime running light or the brake light returns to its original. You could disconnect the red wire if you want the red led cancel. Hope this will help. Best regards Kinstecks |
Question: | I purchased one from you. Any leads where I can buy a Adaptor Leads Connector for 2004 Suzuki vl |
Answer: | Dear customer, Thank you for question. If your motorcycle came factory with LED blinkers, the indicators just plug and play. If not, the below is a link of the LED flasher relay for your reference: https://www.amazon.com/dp/B07P5CF3CV Hope this will help. Best regards Kinstecks |
Question: | DOT approved |
Answer: | The rear lights are suppose to be running lights and not brake lights. |
Question: | what is the bulb size |
Answer: | Each size has the same start up sequence.... |
- ✔Nice Exterior: Black with Amber Lens, high Quality Aluminum, enhance the look of your Motorcycle with these Custom Turn Signals.
- ✔Apply to: Universal suitable for motorcycles, motorbikes, most Honda, Yamaha, Suzuki, Kawasaki, Harley, Ducati, KTM, BMW, Triumph, Hyosung and other motorcycles with 10 mm Holes Fairing. Fit for all universal 12V motorcycles / motorbikes Tail light, Brake light, Front and back Turn signal light.
- ✔Easy to Install and Remove: 3 wires are configured, installed in a variety of motorcycles easily, which can be directly connected to the motorcycle ACC circuit, (AAC circuit means Adaptive Cruise Control .Which is the position where the key is controlled).Use the nut to secure the product in places you want to install.
- ✔Water Tight and Anti-corrosion: iP65 Grade (Prevent the infiltration of low pressure water column from any direction),It can be used in rain or in harsh environments.High strength PP has been used for the light body, with features of shockproofand corrosion resistance.
- ❤XINDELL Motorcycle Turn Signals: If the Motorcycle Light make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers. Plesae don't hesitate to contact us by email.
User questions & answers
Question: | Will this fit Honda rebel |
Answer: | No these won't but there are some on here that fits your motorcycle. Sorry. I bought them for my Suzuki and I had to rig them up to work. |
Question: | Will these work for a 1984 honda shadow vt700c |
Answer: | I have no idea. Maybe get some wire and make your own. |
Question: | Whats the bulb size |
Answer: | Yes |
Question: | They light up but dont blink. Anyone know why? My bike is 2 wire and these are 3, do I need a relay or run the 3rd wire somewhere else |
Answer: | I'm gonna say standard. Like an eleven fifty something. |
Product features
Super Heavy Duty Metal motorcycle turn signal lights.
Aftermarket Turn Signals for that unique customized look Modern, Stylish, Functional.
Universal Design,mounting for most custom motorcycle.
Enhance the cool look of your Motorcycle with XINDELL Mmotorcycle trun signals lights.
Apply to:
Universal fit for motorcycles, motorbikes, most Honda, Yamaha, Suzuki, Kawasaki, Harley, Ducati, KTM, BMW, Triumph, Hyosung and other motorcycles with 10 mm Holes Fairing.
Fit for all universal 12V motorcycles / motorbikes Tail light, Brake light, Front and back Turn signal light.
Operation: Turn Signals (Amber) These do not support running lights.
Fitment:
Complete Custom Application, Modification May Be Required Dimensions: 2 3/4" L x 1 3/4" W x 1 3/4" H
Wiring: 3 Wire Set Up (Power Wire and Ground Wire).
Wiring: 3 Wire Set Up (Power Wire and Ground Wire).
Super Heavy Duty Metal motorcycle turn signal lights
High Quality Weighted Turn Signals Enhance the look of your Motorcycle with these Custom Turn Signals.
2 x Turn Signal Lights.
Easy to Install and Remove .
Motorcycle Turn Signal Blinker Indicator Light
Water Tight and Anti-corrosion:IP65 Grade (Prevent the infiltration of low pressure water column from any direction),It can be used in rain or in harsh environments.
Product description
Super Bright 4PCS Motorcycle Indicators Flowing LED Turn Signal Lights 12V for Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road, Amber Yellow
- Compatibility: 12V 12 LED Motorcycle Flowing Turn Signals Indicator Amber Light, Suitable forall Motorcycles Harley Prince Large Displacement Motorbikes Off-Road Vehicles Suzuki Haojue Honda Yamaha Modified.
- High quality: Motorcycle turn signal is made of ABS plastic, which has high transparency and good wear resistance that guaranteed by quality; Flexible rubber connection base is not easy to break, effectively prevent fracture.
- Flowing Mode Performance: Amber Color Light with blendable Design, Flowing Mode Makes the Car More Upscale and Higher Attention.
- Easy to install: The black line is the negative pole and the red line is the positive pole. The black and red lines can be docked on the original car turn signal line. Besides, including bolt for stabilizing installation.
- Buy with confidence: The package contains 4 motorcycle flowing turn signals indicator amber lights. We offer 1 year warranty and lifetime support. Any issues or questions please feel free to contact us, we are always here to satisfy all of you.
User questions & answers
Question: | Will these work on a Kawasaki vulcan custom |
Answer: | They might, but you are going to want something brighter. Great design but low profile.. |
Question: | What is the width of the mounting bolt |
Answer: | Yes, our motorcycles turn signals are also suitable for the 1984 Honda Shadow vt700c. |
Question: | Are there rear running lights (red), or do the rear only shine when braking/indicating? Thanks |
Answer: | I assume when you ask what size these are you are more looking for a model number for a replacement bulb? If this is the case you can replace these with what is called a small globe/mini 1157, but you will be hard pressed to find them. I purchased bulbs from Napa, the Napa reference number is 1007. |
Question: | put on my 98 honda shadow daylights are working but when i go to put the turn signal on they all start to blink any idea how to fix |
Answer: | Originally setup for red to be the blinker and brown to be the running light. I would personally cap the brown wire and connect the red. that being said one of the 4 lights I ordered had the wires back wards, and another the brown wire broke at the light so it would not hurt to wire both brown and red to the hot blinker wire from the wiring harness. |
Product description
Specifications:
Type: LED Motorcycle turn signals light
Material: Plastic
Quantity: 4pcs; Item Color: Black
Light Color: Amber
Voltage: DC 12V
Connections: Two-Wire Design Includes Both Lead Wire for Mounting to All Surfaces
Wire Length (for one pcs): About 11cm
Package Include: 4pcs lights
LED Motorcycle turn signals light is universal fit for 10MM hole,
they'll work with most popular motorcycle such as Sport bikes / Street Bike /Off Road / Chopper.
Motorcycle Turn signals LED lamp shell snakeskin style handle high flexible rubber, curved high,
which can effectively prevent accidental falls
LED Motorcycle indicators flowing turn universal fitment (All Models & Years) :
Honda
Kawasaki
Suzuki
Yamaha
Aprilia
BMW
Buell
Ducati
KTM
Triumph
- 【4PCS LED Motorcycle Turn Signal Lights】Comes with 4 PCS Turn Signal Lights, Light Size: 11 x 2.5cm, Suitable for Motorcycle Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road
- 【Flowing Mode Performance】led lights for motorcycles turn signals is Amber Color Light with Blendable Design, Flowing Mode Makes The Car More Upscale and Higher Retention
- 【Super Brightness】LED Motorbike Turn Signal Lights Built-in 315 Side Light Beads, High Brightness, Low Power Consumption
- Flexible Shell Rubber】Motorbike Turn Signal Lamp Shell is Snakeskin Style Handle with High Flexible Rubber, Curved High, Which Can Effectively Prevent Accidental Falls
- 【Easy to Install with 2 Wires Connecting】Motorbike Turn Signal Lights direct Bolt-on with 2 Wires Connecting(Black is Positive; Red is Negative), Two-Wire Design Includes Both Lead Wire for Mounting to All Surfaces
User questions & answers
Question: | How long is the wire |
Answer: | Im pretty sure this can work on any kotorcycle but some just require more modifications its the wiring thats really needed more attention |
Question: | Any idea how to fix the quick blinking that happen when the bike thinks a light is out? They work but they are blinking too fast |
Answer: | Somewhere in between 9 and 10 mm in diameter |
Question: | Is the fitting 10mm or 8mm? The kintech ones i bought were 10mm and dont fit my kawasaki |
Answer: | These lights have running and brake lights. You have a choice depends on how you connect your wiring. Or connect them both. This also has signal lights that flows or scans. |
Question: | Is there any other electronics needed? Relay? Resistor |
Answer: | two turn signal circuit wires leading into the gauge cluster (typically the same wire colors as found at the blinker lamps themselves). Once you properly identify them in the harness leading to the gauge cluster, you cut them and install a Diode (1N4001) in each circuit (with the gray band towards the gauge cluster) on the two wires feeding power from the turn signal circuit. You will then combine the outputs of the diodes into one of the two wires leading into the gauge cluster, and ground the other wire going into the gauge cluster. As long as you have 12v you should be okay |
- Mounting bolt thread: 10mm ,Working Voltage: DC 12V
- 3 Wires set up (Ground Wire, Wire for driving lights, Wire for signal lights). Black Line for ground, Red Line for turn signal lights, White Line for driving lights
- Redefines the classic bullet-style turn signal with a clean streamlined housing combined with modern LED innovation; Produces a powerful package worthy of any motorcycle
- Made of high quality Zinc Alloy, CNC machined, 19 Leds, heavier and much better quality than 15 LEDs model in the market
- Universal fit for motorcycles, motorbikes, most Honda, Yamaha, Suzuki, Kawasaki, Harley, Ducati, KTM, BMW, Triumph, Hyosung and other motorcycles with 10 mm Holes Fairing. Fit for all universal 12V motorcycles / motorbikes.
User questions & answers
Question: | I have installed these but fully connected the only work when using my turn signal if i disconnect the turn signal wire the running lights come on |
Answer: | It's about 12inches, but you can always extend the wire. Mines are on my bike and gets a lot of attention. |
Question: | Any reason why the drl function wont work while the turn signal wires are hooked up? i have load resistors on |
Answer: | You’ll need to get an LED turn signal flasher for motorcycle or a Load Resistor. |
Question: | Do they come as a set |
Answer: | The fitting measures 9.5 millimeters. |
Question: | Can i order just the smoked lens for these lights |
Answer: | No. |
Product description
Features:
Function: Front handlebar turn signal indicator lights.
Sequential function high-intensity LEDs with amber and smoke lenses.
LED motorcycle turn signals can be using the mirror stem mounting bolts to mounted under the handlebar brake clutch lever.
Black anodized finish.
Easy to install, no modification needed.
Long lasting, low power consumption, energy saving.
Specifications:
Material: Plastic Lens, Metal Bracket
Body Color: Black
Lens Color: Smoke
Lights Color: Amber (Flowing)
Voltage: 12V
Bolt size: aprox. 8.3mm
Fitment:
Universal for 12V Motorcycle with 8mm mirror stem mounting bolts, such as compatible with Harley Softail Dyna
Sportster FLHT FLHR FLTR FLHX FLSS FLSTFBS, Honda, Yamaha, Suzuki, Kawasaki, Ducati
NOTE: Please check and make sure this blinker for motorcycle fits your motorbikes before ordering.
Package Included:
2 x LED motorcycle handlebar turn signals
- Compatibility - Handlebar mounted turn signals compatible with Harley Sportster Dyna Iron 883 Fat Bob Softail and Touring. Also compatible with Honda, Yamaha, Suzuki, Kawasaki, Ducati, Cruiser, Choppers, Street Bikes, Cafe Racers, and any custom application. Please check and make sure the motorcycle blinkers fit your motorbike before ordering.
- 180 Degrees of Visible Light - Mini turn signal indicator built in 6 PCS LEDs, low power consumption, 99% reduce burning bulbs, energy saving. Greatly increased your visibility at night, foggy and rainy days or any extreme weather, make your driving safer.
- Sequential Light Mode - Flowing amber light for turn signal, stylish, nice and attractive, add features to your motorcycle, enhance your motorcycle appearance. Can be using the mirror stem mounting bolts to mounted under the handlebar mirror. Easy wiring, black wire to ground, red wire and yellow wire to turn signals.
- Waterproof & Durable - The front led turn signals made of smoked PC lens, anti-scratch and waterproof, protect led chips from water or dirt damage without weakening light, prolong the life service time. Metal bracket processed with black anodized finish, anti-oxidation, anti-corrosion.
- Buy with Confidence - Package Included: 2 x Smoked Handlebar Marker Lights. You are backed by 6-Month warranty since the order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once the detail is confirmed.
User questions & answers
Question: | Do they also work as running lights |
Answer: | Hi, Yes, I will upload an option for smoked lens with amber light, then it's available to order. |
Product description
If there is any defective part of the light in the set, please contact us Lemonbest directly for the free replacement parts.
Specifications:
Type: Motorcycle turn signal light
Material: Plastic
Quantity: 4pcs; Item Color: Black
LED Quantity (for one pcs): 12 (9 amber + 3 blue)
Light Color: Amber and blue
Voltage: DC 12V
Connections: 3 wires, black for negative, red for amber light, blue for blue light
Wire Length (for one pcs): About 21cm
Size (for one pcs): 10.8*2.8*3cm
Net Weight (for one pcs): 380g
Package Include: 4pcs lights
Universal Fitment:
Honda (All Models & Years)
Kawasaki (All Models & Years)
Suzuki (All Models & Years)
Yamaha (All Models & Years)
Aprilia (All Models & Years)
BMW (All Models & Years)
Buell (All Models & Years)
Ducati (All Models & Years)
KTM (All Models & Years)
Triumph (All Models & Years)
- Material: Plastic and Metal; Cool Appearance, Black with Clear Lens.If there is only one or two lights defective in the set, please contact us Lemonbest directly for resending the replacement parts.
- Two color light design, LED Quantity for one pcs: 12 (9 Amber, 3 Blue)
- Voltage: 12V; 3 wires connections, black for negative, red for amber light, blue for blue light
- Easy installation, Direct Bolt-on; Long lasting, low power consumption
- Usage: Turn Signal /Indicators Lights, Universal fit for all motorcycles
User questions & answers
Question: | I have a 2015 Honda cbr 300r, do I need to run an extra wire for the blue lights? Also will these blink extra fast because there led |
Answer: | No, just work as turn signal, and the light mode is flowing amber |
Question: | Hi...I am replacing incandecents ...what value load resistors would you recommend oms at how many watts |
Answer: | Try adding a load resistor. |
Question: | Are they waterproof? Whats the warranty like |
Answer: | Don't know mine did the same thing...they told me also a resistor was not needed..if you disconnect the turn signal wire it will work but then you have no turn signals lmao...sorry they couldn't help me either....I also sent them video and pictures of inside and what the lights were doing...wouldn't recommend this product |
Question: | I have a Honda ruckus. I just got the lights delivered this morning. Can someone tell me how to install these |
Answer: | Yes, they come as a set. |
- [MATERIAL]: 24 gauge teflon coated wire leads with black heat shrink sheathing, make sure wrap-around LED turn signal stay in place even on the hottest summer day
- [DURABLE]: With 3M double side adhesive mounting tape on back and Zip Ties for added strength
- [GOOD DESIGN]: 120 degree viewing angle for wider visibility, more secure and brighter. Can work as turn signals, running, license plate lights, etc.; Waterproof & Sleek
- [LED Fork Warp Lights]: Come with 36pcs supper bright 3014-SMD Leds each strip, Wrap around your motorcycle forks. Used as front and rear signals light
- [Fitment]: Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands, Fit for Harley 39mm-70mm Fork as well.
User questions & answers
Question: | Whats thr part number for the load equalizer |
Answer: | They will probably blink fast unless you use a relay. It's possible that they won't blink at all though. For the blue lights, it depends on what you want them to do. You can just connect the signal red and signal blue wires both to the bike red (hot), and the signal black to the bike black to make the amber and blue lights blink together. If you want the blue light to work like a running light (on all the time) then you'll need another wire for the Honda. Signal red to bike red, signal black to bike black, and signal blue to a new wire. You could run the new wire back to the dash/gauges so those all light up together, or to the headlights. Either way, you'll need another relay or a resistor to get that all working, and a fused connector for the new wire is smart (but not strictly required). |
Question: | Where can I get signal for the running light? Victory Highball |
Answer: | 9 amber of the current, you can use 30w to try. |
Question: | Can the turn signal be used and not the DRL |
Answer: | It is IP65 water resistant, not IP68 waterproof and cannot soak underwater. We provide 1 year warranty for this kind of light. |
Question: | Where are these manufactured |
Answer: | Find your hot wire from the original turn signal and your ground. There should be a wiring diagram online or in your owners manual. Splice the wires and pull back the wire casing to expose the copper fibres. Slide the ground wire from the bike into the black wire's metal receptacle and secure by using electrical tape or soldering. Next do the same, taking the hot wire from the bike and sliding it into the red wire's metal receptacle and the blue wire on the Lemonbest in there as well if you want the blue lights to illuminate (check your local laws on blue colored lights; they're ILLEGAL in my state). Then test by running your normal turn signal action and hazard lights.NOTE: These blink quickly and you'll need another resistor external of the bike's resistor to "slow" them down. By you splicing this new set in, the bike's electrical system reads it as a fault in the line like say one blown bulb out of all four. If you don't mind that, you will love these. Hope this helps! ~Kendra |
Product features
Features
- New design with Swithback colors (White & Amber) - Operation: 12V DC - Adjustable size for almost all motorcycle with Forks
- Constructed from waterproof & distortable soft Glue
- Easy installation with self-adhesive tape and cable tie - Each individual strip Powered by 36 Super bright LEDs with 120 degree viewing angle for white and amber color - It will keep white color as day time running lights, turn to amber color as turn signal lights when turn left or right
- Fitment: Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well
Installation: The black wire to negative The green wire to signal Light The red wire to DRL/Driving Light
- Note: A Load Equalizer may be required when switching to LED turn signals.
Installation
The black wire to negative
The Yellow wire to signal Light
The red wire to DRL/Driving Light
Easy installation with self-adhesive tape and cable tie
Univeral for any other motorcycle with Forks Some known motorcycle models: 2006-2015 Victory Jackpot & Ness Jackpot 2003-2017 Victory Vegas 2006-2017 Victory Vegas 8-Ball 2012-2015 Victory Judge 2012-2017 Victory High Ball 2015-2017 Victory Gunner etc.
Fitments
* Some known motorcycle models:
* 2006-2015 Victory Jackpot & Ness Jackpot
* 2003-2017 Victory Vegas
* 2006-2017 Victory Vegas 8-Ball
* 2012-2015 Victory Judge
* 2012-2017 Victory High Ball
* 2015-2017 Victory Gunner
Product description
SIZE : 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8"
- Voltage: 12V Compatibility: Universal Fit for All motorcycle and bycycle
- Package Included: 4 x Motorcycle Turn Signal led Indicators Lights
- Light Colors: Amber yellow
- shell case black color
- Low power consumption
User questions & answers
Question: | Can they work on a 125 apollo |
Answer: | I be honest I don’t know I had some from autozone laying around that I used |
Question: | How many lumens do the lights put out |
Answer: | Any source for switched (+) 12v. can be used for a running light. |
Question: | Will these fit and hook up right without any additional modifications on my 2016 honda xr650l |
Answer: | Yes. You just wire accordingly |
Question: | Put on my cb750, lights don't blink just stay on. When signal left the right turns off. Do i need load resistor or a relay |
Answer: | China, of course. |
- High Quality:The LED turn signals made of High-Quality Zinc Alloy & AS material which provide a long lifespan
- Super Bright:Motorcycle Turn Signals,with 20 Ultra Bright LED Amber Yellow Bulbs inside for Maximum Visibility, Low Power Consumption, Bright enough even under the daylight
- Broad Compatibility:Turn Signal /Indicators Lights,Universal fit Most Motorcycle, Street Bike, Cruiser, Chopper such as Harley / Honda/ Kawasaki / BMW / Yamaha / Suzuki / Ducati / Benelli / Aprilia,ect.
- Best Choice:Mini Volume, Cool Appearance and Scientific Design make them a great option for customers to buy for their vehicles
- Package Includes: 1 Pair (Left & Right) 12V Motorcycle Turn Signal Lights,2 wires, black for negative, amber yellow for positive
User questions & answers
Question: | Are these led or standard bulb |
Answer: | The lights will work on any bike that has a 12v lighting system. Different applications might require some light fabrication for brackets or other ways of mounting but will work as long as the wiring and turn signal switch are intact. |
Question: | Are they the typical 2 3/8" opening |
Answer: | Not sure, but they're plenty bright enough for road use. |
Question: | Do these suport running lights |
Answer: | They should have no problem wiring into a 2 wire system. Unless the bike came with LED blinkers, you'll need an adjustable flasher relay to run them. Check how many pins your existing one is, and match it. |
Question: | Can you replace the leds |
Answer: | You may want to check your flasher or grounding wire.... |
Product features
Product description
2pcs Led Turn Signal Lights Motorcycle Indicators Blinker Amber Light Universal 12V for Harley Honda Yamaha Suzuki
DESCRIPTION
Enhance the look with these LED Turn Signals
Type: Motorcycle turn signal light
Condition: 100% Brand New
Quantity: 1 Pair (Left & Right)
Light Color: Amber Yellow
Material: Heavy Duty Zinc Alloy & AS
Bulb Type: LED
Thread specification :M10
One-pack dimensions:4.1’’ x 2.4” x 3.3”
Connections: 2 wires, black for negative, amber yellow for positive
Bright LED Turn Signal Lights
Easy to Install
Light Size:68mm/2.68" * 43mm/1.69"
- 【4PCS Turn Signal Lights】Comes with 4 PCS Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road
- 【Unique Flowing LED Lighting Design】Y Shape,Equipped with 12LED, Amber Color and Flowing Mode, Cool Design, Great for Turn Signal and Indicators Usage
- 【Water Sealed】IP65 Waterproof, Material in Durable and Waterproof Plastic, Make it Resistant to Water Damage
- 【Light Size】Dimension: 11.8x3x2.5cm, Cable Length: 24.5cm
- 【Easy to Install】Plug Type: Black Line is Negative, Red Line is Positive, Easy Installation, Directly Mount to the Original Turn Signal Light Place
User questions & answers
Question: | will these work with a led turn signal flasher? no resistors |
Answer: | I think when I ordered mine, it said they were LED but wish they were brighter. I’ve put power to them but haven’t installed them yet |
Question: | Do I need a flasher or resistor to make them work on my cbr |
Answer: | What do you mean by opening |
Question: | I installed just the front 2 led blinkers, the back two are stock incandescent bulbs.. the front new led blinkers keep blinking even if it’s not on |
Answer: | No they burn out fast save ur money |
Question: | Do you need to purchase a resistor separately |
Answer: | I don't know...but I doubt it. |
Product features
Unique Flowing LED Lighting Design
Y Shape,Equipped with 12LED, Amber Color
Cool Design, Great for Turn Signal and Indicators Usage
Latest Reviews
View all
Desk Cord Hole
- Updated: 25.06.2023
- Read reviews

Multicultural Education Methods
- Updated: 13.04.2023
- Read reviews

Infinity 10 Inch Subwoofers
- Updated: 17.01.2023
- Read reviews

Suunto Heart Rate Watches
- Updated: 06.04.2023
- Read reviews

Rubbermaid Commercial Upright Vacuums
- Updated: 08.06.2023
- Read reviews