11 best atv grip warmers
ATV grip warmers are a popular accessory for all-terrain vehicles (ATVs) and motorcycles, designed to provide riders with added comfort and warmth, especially in cold weather conditions. These grip warmers are related to grips, handlebars components, controls, and are commonly found in the motorcycle powersports and automotive markets. Here's what you need to know about ATV grip warmers:
Purpose: ATV grip warmers are installed on the handlebars of the vehicle to keep the rider's hands warm during cold weather or in chilly riding conditions. They help prevent cold-induced discomfort and maintain dexterity and control over the vehicle.
Components: Grip warmers typically consist of heating elements integrated into the handlebar grips. These elements are connected to a power source, usually the vehicle's electrical system, to generate heat.
Installation: Installing grip warmers typically involves removing the existing handlebar grips and replacing them with the grip warmers.The heating elements are then wired to the vehicle's electrical system, allowing the rider to control the heat level.
Control Options: Grip warmers often come with adjustable heat settings, allowing riders to select the level of warmth they prefer. Some models may also have on/off switches for easy control.
Power Source: Grip warmers are usually powered by the ATV's battery or electrical system. They draw a relatively low amount of power and are designed not to drain the battery excessively.
Temperature Regulation: Quality grip warmers are designed to maintain a consistent temperature to prevent overheating or discomfort. They are engineered to withstand the rigors of off-road riding.
Benefits:
- Comfort: Grip warmers significantly improve rider comfort in cold conditions, reducing the risk of numbness and discomfort in the hands.
- Safety: Warm hands are more nimble and responsive, which enhances control and safety, especially when riding on challenging terrains.
- Extended Riding Season: With grip warmers, riders can comfortably extend their riding season into colder months.
Compatibility: It's important to ensure that the grip warmers are compatible with your specific ATV model and handlebar setup. There are universal options available as well as models designed for specific makes and models.
Maintenance: Grip warmers generally require minimal maintenance. Regularly inspecting the wiring and heating elements for wear and tear is a good practice.
Accessories: Some grip warmer kits may come with additional accessories, such as throttle assist to reduce hand fatigue during long rides or handguards to protect against wind and debris.
In summary, ATV grip warmers are a practical and comfortable accessory for ATV and motorcycle riders who frequently ride in cold or chilly conditions. They are designed to keep the rider's hands warm, enhance control, and extend the riding season. Proper installation and compatibility with the vehicle are essential to ensure their effectiveness and safety.
Below you can find our editor's choice of the best atv grip warmers on the marketProduct description
Enjoy riding your Sportsman in cool and cold weather with these toasty Hand Warmers. All wiring is included so you can keep your hands warm and functioning freely in cold weather.
- Fits on All Sportsman, Sportsman Trail Boss, Sportsman Trail Blazer, Scrambler
- Keeps both hands warm while riding
- Complete kit includes all wiring
User questions & answers
Question: | Will these fit on a 2005 Sportsman |
Answer: | They will work on any size/ brand ATV. they have draw strings to adjust to fit b |
Question: | Will this work on Sportsman |
Answer: | They fit my ski doo. Not sure what a road king is. |
Question: | Will this fit on a Polaris |
Answer: | I never used them out in the rain, but I used them several times in the winter when it was snowing they were nice and dry on the inside after my rides. I found them nice and warm on my hands also. |
Question: | The switch shown in the picture is white and round. The Polaris kit should come with a black rectangular switch. Which one does this kit come with |
Answer: | Hi there I bought these to use on my straight handled commuter bicycle.So my review will be able to speak about there construction and versatility.I will say that after riding in to work one morning, a co worker, who does ride a snowmobile,came over and examined them and thought they would work well for his snowmobiling.They are very well constructed. They have and extra layer of hard rubber in the front that, for me deflect air,and for snow mobile, would deflect tree branches and briars.They are lined with a warm fleece insideStay open on their own, so hands go in and out easyGreat zipper and cinch seal on the end to keep them in placeWork excellent for my needs |
Product description
CLAMP-ON GRIP KIT
- Fits all ATV makes and models with a 7/8" handlebar
- Two heated clamp-on grips - no adhesive required for installation
- Comes with a 3-position (off, low, high) round rocker switch
- Maximum 40 watts (20 per grip) at 14 volts
- Kit includes everything needed for simple installation
User questions & answers
Question: | will they fit on a Polaris sportsman atv |
Answer: | Yes, I installed on a 2007 Sportsman 500 deluxe, worked great, you will have to drill hole in headlight housing for toggle switch, and use compressed air to get old grips off, works like magic. Put air nozzel in hole on end of old grips and they will come off very easy |
Question: | is the heat good enough to warm my hands through gloves? hands still get cold with gloves on in colorado, was hoping its strong enough to heat through |
Answer: | I am not sure, I am going to Colorado on a combo deer/elk hunt next month and have not used them in the cold weather yet. A friend has a set from a competitor brand and swears by them. I am thinking they will be plenty warm. I had them professionally installed to the ignition. Otherwise, they could drain the battery. |
Question: | Can I get heated grips for non-battery machine |
Answer: | Nope. Needs 12v power and a good ground |
Question: | Is the switch on this weatherproof? Given only 40w, is it recommended to use a relay or just to use an ignition wire |
Answer: | The wires do not have sealed connections but they sit under my ATV's panels so I'm not worried about water. You could seal off the wires with heat shrink tubing if you want a good seal. The instructions recommend just using an ignition wire. That's exactly what I did and I have not run into any problems. |
Product description
LED dimmer facilitates reading temperature settings 4 temperature settings with individual controls for thumb and grips Returns to previous heat setting One-touch shutdown
- LED dimmer facilitates reading temperature settings.
- One-touch shutdown.
- 4 temperature settings with individual controls for thumb and grips.
- Returns to previous heat setting.
- Fits: G2, G2L, G2S (except 2020 models equipped with 850 engine, and 2019 & up models with 1000R engine models, 6x6 models, and European vehicles)
User questions & answers
Question: | Will this fit a 2016 can am outlander 850 Max Xt |
Answer: | Yes it will |
Question: | The description states requires wiring cable (710004567). does this heater come with this cable? i have a can-am g2 fit code |
Answer: | I have a G2L model: 2017 Outlander Max 570, so where do you order this cable? I don't see it on Amazon or Ebay, etc. |
Question: | Can anyone confirm this will fit a 2020 outlander 650XT |
Answer: | Yes it will fit on a 2020 Outlander 650 |
Question: | Will this fit a 2006 Outlander 800 XT |
Answer: | Never bought this item........card was hacked......... |
Product description
The Quad Zone ATV Clamp-On Heated Grip kit was designed to keep your hands and thumbs warm while riding or working in cold weather, with an easy-to-install grip and thumb warmer kit. Our innovative design let's you control the amount of heat you desire with the Quad Zone controller. The controller has multiple mounting options, adjustable LEDs for day or night operation and will shut off automatically after two hours to save your battery life. With the Quad Zone controller, you can power a heated seat, heated vest, or heated boot insole-inserts independently from the grips and thumb warmer. Image is for reference only, actual product may vary.
- Fits all ATV makes and models with a 7/8" handlebar
- Two heated clamp-on grips and one adhesive-backed silicone thumb warmer
- Quad-Zone Controller - select your thumb and grip heat levels separately with additional zones for heated seat, vest, or insole heaters
- Maximum 45 watts (20 per grip, 5 per thumb warmer) at 14 volts
- Kit includes one zip tie and doesn't include wire taps
User questions & answers
Question: | Are replacement parts available |
Answer: | Yes, you can reach out to Heat Demon (Symtec) for replacement parts |
Question: | What size handlebars will these fit? I am purchasing a Moose dual gasser and was wondering if this would fit the twist throttle |
Answer: | It won't fit with a twist throttle, you would have to get the heat element only. |
Question: | Need a defrost for windshield |
Answer: | The quad zone kit has 2 extra spots for additional heaters. I don’t see why you couldn’t have a windshield heater if it has the rca style plug in |
Question: | Will the quad zone controller fit on the handle bar that has a windshield already attached? if not, where to attach on a grizzly |
Answer: | I am not sure. I mounted the controller to my winch toggle switch with the bracket provided. I didn't care for the plastic handle bar mount bracket. I am not sure how much room the windshield restricts the handle bars but I still had plenty of room after mounting to the winch toggle bracket. |
Product description
The Tusk ATV Lock-On Heated Grips are the perfect accessory for anyone using their ATV in cold weather. This plug and play kit comes with 2 molded comfortable hand grips with locks, adjustable heat controller with 5 modes and an easy to connect wire harness with fuse. When in need of quality parts and accessories for your motorcycle, ATV or UTV think Tusk!
- Includes both grip heater and thumb warmer.
- Simple to use Lock-On heated ATV grips. Designed for ATVs with thumb throttles. Will NOT work with twist grip throttles. Inner diameter 7/8" Easy installation. Contains 2 locking molded ATV grips, 5 mode heat controller and wire harness.
User questions & answers
Question: | Can you drill a hole through the end of the hand warmers to re-mount your hand guards |
Answer: | this is a universal warmer. Should fit most ATV thumb throttles. Thanks. |
Question: | does the thumb warmer come with this |
Answer: | Yes, it came with all the wiring needed and is still working properly. |
Question: | Can you turn heaters off when not needed |
Answer: | I put mine on the front. If you put it on the back it will take forever to heat the throttle before it can warm the thumb |
Question: | i bought these and every time i use my winch they shut off, why would these shut off? is there a mechanical switch i can use instead of the digital |
Answer: | I believe it is in line. However I'm not 100% certain. |
Product description
The Dual Zone ATV Clamp-On Heated Grip kit was designed to keep your hands and thumbs warm while riding or working in cold weather, with an easy-to-install grip and thumb warmer. Our innovative design let's you independently control the amount of heat you desire for the grips and thumb warmer with the Dual Zone controller. The control unit has multiple mounting options, adjustable LEDs for day or night operation and will shut off automatically after two hours to save your battery life.
- Fits all ATV makes and models with a 7/8" handlebar
- Two heated clamp-on grips and one adhesive-backed silicone thumb warmer
- Dual-Zone Controller - select your thumb and grip heat levels separately
- Maximum 45 watts (20 per grip, 5 per thumb warmer) at 14 volts
- Kit includes everything needed for simple installation
User questions & answers
Question: | Will these work on a snowmobile |
Answer: | Yes. They would work but the heated mittens/bar warmers maybe better |
Question: | I see "push on" or "clamp on" versions of these heated grips. Does one work better than the other |
Answer: | Hi, I went for the clamp on version, being an engineer I like the option to remove/reposition etc. It's a good tight fit and I simply couldn't be happier with the grips a season later. The only negative being the flimsy plastic bracket that hold the little control box to the bars, although it hasn't broken, it's just a cheap part on an otherwise excellent set up. |
Question: | Is heat shrink tubing included for the thumb warmer |
Answer: | Yes. heat shrink tubing is included for the thumb warmer. |
Question: | Will these fit a arctic cat 650 v twin automatic 4x4 atv cat green |
Answer: | Yes |
Product description
Specifications:
Material: Plastic
Color: Black
Input Voltage: 12V
Power: 12W-24W Adjustable
Temperature: Max. Temperature 70℃, Min. Temperature 50℃
Length: 123mm/4.8"
Hole Diameter: 22mm/0.87"
Package Weight: approx. 250g
Fitment: Fit for most 12V motorcycle or ATV with 22mm(7/8") diameter handlebar
Package Included:
1 x Pair of Motorcycle Handlebar
Notes:
1. Please note that the temperature can not be adjusted if the wire connected wrong.
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
- Fitment: Fit for most 12V motorcycle or ATV with 22mm(7/8") diameter handlebar.
- 100% brand new motorcycle electric heated grips handlebar. Temperature is adjustable allows you can find the optimum temperature during driving
- Advanced electronic thermostat system does not consume power, helps to protect the battery
- With texture on the handlebar surface, it is anti-skid and providing a safe driving for you
- After-sales service: We are a professional seller of Amazon. If you have any problems using our equipment, you can contact our customer service staff who will provide you with a solution in a timely manner.
User questions & answers
Question: | Will these work on a Polaris sportsman |
Answer: | I have a 2005 suzuki Eiger 400 with a thumb throttle and it works fine. I do not have an extension on the throttle. May not work if you have an extension on throttle but should work fine with normal thumb throttle. |
- Extra Service Life: Motorcycle Heated Grips have No sliding contacts with the metal handlebar, Easy to refuel. The Power cable won’t move when refueling.
- Premium Material: Be Made of Environmental Soft TUP, High Quality with Soft Touching Feeling. Nice Driving Enjoyment even After replacing original Handle Bar with this Heated Grips.
- 3-Gear Adjustable Temperature: The Motorcycle Heated Grips Provide function of 3-Gear Adjustment. 50℃ to 70℃ for Different Temperature Need.
- Advanced & Safe: Injection molding by One Time, Not Splicing. Advanced Craft Allow this Heated Grips Waterproof/Dust-Proof, Much Longer Service life & Safe.
- Universal Compatibility: Universal Motorcycle ATV Heated Grip, Fit Most Motorcycle ATV Model with 7/8”(22mm) Handlebar.
User questions & answers
Question: | Is this compatible with a Kymco Xtown |
Answer: | Yes. I just searched the handlebar for Kymco Xtown 300 and found it was 7/8, so it fits. |
Product features
Motorcycle ATV Heated Grip with USB Phone Charger
7/8" 22MM Waterproof Motorcycle ATV Handlebar Heated Grip with Switch ON/Off
It's a Heated Grip for a Motorcycle with a Diameter of 7/8”(22mm)
With the Function of Heating. Also, Include the Functions of Voltmeter & USB Charging.
With This Heated Grips, Keep Your Hands Warm when Driving in Winter.
Nice Design and Appearance
Nice Design and Good Looking for installing in Your Motorcycle/ATV.
Replacement for the original Handlebar Grips, Enjoy Driving in Winter.
Turn On/Off Switch Button, Allows you to turn it off When not in use.
Left Grip with Multi Function
Multifunctional integration in One Product, Saving Money for Buying too Much Motorcycle Accessories, Reducing the Space Occupied by Multiple Device
Digital Voltmeter for Monitor Your Battery
Digital LED Voltmeter for Real-Time Monitor the Battery's Status.
Red LED Shows Clearly and Easy to Identify.
USB Port for Charging
Heating Grip with a USB Port for Charging Your Phone/Tablet or Other USB Powered Device.
When Charging the Device, the Voltmeter Shows USB Output Voltage for Safe Charging.
Double Throttle Core for Full Compatibility
Whether Your Motorcycle/ATV is Single Throttle or Double Throttle, This Heated Grip will fit it.
Multifunctional Motorcycle Heated Grips
1. Heated Grip Keep Your Hands Warmmer
2. with Led Indicator for Power on Indication
3. USB Port for Charging: 5V 2.1A Compatible for phones/Tabets and other Devices
4. Voltemeter Monitor for Real-Time Monitor Battery Voltage/ USB Charing Output Voltage
Compatible Model:
Universal for Motorcycle or ATV which with 7/8"(2.2CM) Handlebar Grip.
How to Connec Cable
Two Heating Grips Connect together,
Yellow Color Cable(with Terminals) Connect with Yellow Color Cable
Red Color Cable(With Terminals) Connect with Red Color Cable
Red Wire Connects to Electronic Door Locks Positvie Output Wires
Black Wire Connects any Negative Wire Insie of the Motorcycle
- 【 Good Warmth Retention Property 】 This item can keep your hands warm in cold weather, it's time to feel the heat with these adhesive heated pads which stick under your motorcycle's grips.
- 【 Flexible and Adhesive 】 This product is flexible and adhesive, so its pads can fit under your grips without causing any loss of control.
- 【 Fast Speed 】 The warm-up speed is very quick, with it you will feel warm quickly while you are riding. You can get our high quality motorcycle heated pad at an affordable price. Don't hesitate!
- 【 Adjustable and Practicability 】 This product adopts 3 position switch, so the temperature can be adjusted according to demand, very convenient and easy to use.
- 【 Good Compatibility 】 It can be fit for all motorcycles, electromobiles, hand trailers and so on. Don't suffer any longer - get your heated handlebar grip pads now!
User questions & answers
Question: | how many amps do they draw |
Answer: | Hello, The Mitts are not modle specific. They have adjustable openings that will fit over standard Handlebars/controls excluding mirriors. Thanks. |
Question: | Are the heaters the same for clutch and throttle side |
Answer: | Ive got a '14 570....it fits fine...warm and roomy...i love them...goes over brake res and hand levers no sweat and cinches closed |
- [Third Gear Switch Energy Saving]-- Energy-efficient electric hand dedicated on/off switch, high and low temperature adjustable casually , very convenient, safe, energy saving. Allow the user to change the temperature without removing the hands from the handle bar for a safer ride
- [Elegant Design]-- Elegant, open-end grip design make the heated grip both functional and stylish. Square tread pattern for medium wear resistance and maximum vibration absorption. Advanced electronic thermostat system does not consume power, helps to protect the battery
- [High Quality Marterial]-- One pair of motorcycle electric heated grips handlebar, perfect for winter use. Made of high quality plastic, durable and corrosion resistant, provides a secure and comfortable grip touch feeling. With texture on the handlebar surface, it is anti-skid and providing a safe driving for you
- [Adjustable Temperature]-- This new elegant handlebar grips design with revolutionary heating structure delivers heat faster than ever. The new five-level temperature controller allows you accurately adjust the grip temperature to find the optimum temperature during driving for cold weather conditions
- [Wide Application & Package]-- Universial Fitment for all of motorcycles or ATV with 22mm 7/8 inch diameter handlebar. Package: 1 x Pair of Motorcycle Handlebar Grips, 2 x Covers, 1 x Sleeve. This Heated Handlebar Grips comes with extended anti-separation sleeve, twist throttle more safer. 100% test before shipping to ensure product perfect
User questions & answers
Question: | can the grips be removed to be replaced with others |
Answer: | Glad to help you! Yes, the grips can be removed for replacement. |
Product description
Keep your hands warm during those cold winter activities - plowing, hunting, fishing and riding your ATV.
- Plug & Play connectors
- Comfortable rubber grips
- Handlebar mounted dial switch
- Compatible with vehicle type: all-terrain-vehicles
User questions & answers
Question: | do these fit the VTX 1300 r |
Answer: | We put ours on a honda foreman |
Question: | will these fit my 2008 Kawasaki ZG1400 Concours |
Answer: | Measure the diameter of your handlebars. The following was taken from Koplin website: Easy to install with fully assembled, plug-n-play electrical connectors to any standard ATV or snowmobile with 7/8" handlebars. If you do not have 7/8 inch handlebars they will not fit! |
Question: | Do they shut off when the machine is shut off or do you have the remember to hit a switch each time |
Answer: | If you wire them direct to the battery you have to shut them off manually with the switch. If you wire them to a spot that is only hot when the key is on they will shut off when you stop the motor. |
Question: | How many amps of power do I need |
Answer: | The paperwork says " 0.68 amp on low and 2.57 amp on high ". I hope that helps. It has 3amp fuse. |
Latest Reviews
View all
Bmw Wristwatches
- Updated: 19.07.2023
- Read reviews

Phat Tommy Patio Chairs
- Updated: 13.01.2023
- Read reviews

Pyramid America Posters
- Updated: 22.04.2023
- Read reviews

Continental Planet Bike Road Bike Lights
- Updated: 11.04.2023
- Read reviews

Swamp Cooler For Camping
- Updated: 17.04.2023
- Read reviews