13 best dirt bike hitch carriers

• Durable, hitch-mounted motorcycle carrier for use with dirt bikes and motorcycles
• Self-storing ramp installs on either side with roll-on, roll-off design for easy loading and unloading
• Includes an anti-rattle device and spacer bar adapter to fit youth 50-80cc bikes
• Manufactured from lightweight aluminum with a 400 lb. weight capacity
• Designed for bikes with wheels up to 5-1/2" wide and use with Class III or IV hitch receivers

User questions & answers

Question:	What is the distance from the center of the hitch pin (the pin that holds this into the receiver), to the center of the wheel track when installed
Answer:	I've put roughly 5000 miles on mine with no problems. KTM 500. Just check the bolts that stabilize the post to the receiver occasionally and run a ratchet strap from the bike to the bumper to keep it from rocking.
Question:	I have an fj cruiser and im curious does this ramp stick out far enough where the spare tire wont get in the way
Answer:	103 years old....
Question:	Traveling frm alaska to california 3200mi will this hold up? wr250r is the bike
Answer:	Part of the “class” requirement is related to the tongue weight. This is the amount of weight that can weigh down vertically on the steel receiver that you put the bar into for this carrier. The 3500 lbs you’re referring to is the towing rating. This has nothing to do with how much weight can be loaded down on the receiver, which is the only important thing when considering something like this that is suspended in the air and not in contact with the ground, like a trailer would be. In other words, this may fit your receiver, but you wouldn’t be able to approach the 500 lb weight capacity without risking failure.
Question:	how old do you have to be
Answer:	I think it would work. It sticks out a good distance but if it was too close, you can buy a hitch extension to make it work.

Product features

Black Widow Aluminum Dirt Bike Carrier

Haul your dirt bike, electric bicycle or fat tire bicycle without the hassle of pulling a trailer by installing our best-selling dirt bike and motorcycle carrier on your Class III or IV 2-inch trailer hitch. Made from high-strength aluminum, this versatile motocross/dirt bike carrier is lightweight, easy to handle, and very durable. It includes a loading ramp, which can be installed on either the front or the back of the carrier and allows for loading and unloading from either side. The ramp stores flat on the carrier when not in use. Also includes an anti-rattle device to ensure stability during transport, and a spacer bar adapter for transporting youth 50-80cc dirt bikes.

Strong Yet Lightweight Design

Built in aluminum, this carrier weighs only 36.5 pounds, making it incredibly easy to install or remove. Bonus to aluminum - it doesn't have the same potential to rust as steel.

Roll-up/roll-off - load your bike from the left or right

The loading ramp can be set up on the right or left side of the carrier so that you can load and unload from either direction. Great for accommodating parking lot traffic, tight spaces, or natural hazards.

Self-storing ramp

The ramp attaches directly to the carrier when it's not needed so that you don't have to worry about losing it in transit or when you're back at home.

Black Widow - Motorcycle Carriers and More

Black Widow offers affordable loading, unloading and transportation options for powersports users with motorcycles, dirt bikes, ATVs, and more. Our motorcycle carriers are designed to provide a cost-effective alternative to hitching up a trailer, and allow you to easily roll your bike up and onto the carrier platform.

• 🚴 The bike rack and ramp is made from heavy duty steel and can haul capacities up to 500 pounds. The carrier also includes a pair of ratchet straps to help secure your ride
• 🚴 The hitch bike rack is 73.5” long X 31.5" wide X 5.5” with a total weight of 61 lbs & can load bikes with tires up to 5" wide. The hitch mounted bike carrier is finished with an anti rust coating for many years of use
• 🚴 Can to be used on all vehicles with a 2 inch hitch receiver so you can save space on your truck and enjoy your wheels in style
• 🚴 Anti tilt feature with 4 heavy duty ratchet straps and 4 loop straps to prevent your bike from shaking and wobbling during transit to avoid any damage or scratches to your motorized bike
• 🚴 CUSTOMER SATISFACTION: 3 Year Warranty - Our customers are our number 1 priority. If you have a questions or concerns about your dirt bike carrier please contact us and we will resolve any issues you may have. Transport your bike with ease!

User questions & answers

Question:	Will I be able to tow my 1980 Yamaha 250 cc with it or not
Answer:	As long as the tires are under 5" it should work.
Question:	can the loading ramp be put on either side
Answer:	Yes
Question:	Would this handle an ebike? or is the wheel well too wide? i cannot pick my bike up anymore to put on rack. it's about 50lbs. thank you
Answer:	I would believe it would work for any pedal bike to a dirt bike. It comes with decent ratchet straps that you should be able to tie your bike down with because it’s rot the rack that holds the bike in place necessarily but the straps. You could probably use zip ties to tie in some boards to narrow the rack as well for a snug tire fit.
Question:	How much is the weight of the rack without the loading rack and is the loading rack detachable to decrease weight
Answer:	Whole thing weighs 53lbs and yes ramp is detachable and takes about 10lbs off

Product features

Features:

• Free up more space for your friends and family.
• Keep wet and dirty bikes from getting your vehicle muddy and messy.
• Sturdy steel construction with a corrosion-resistant powder coat finish.
• Simple & easy bolt-together assembly.
• Anti tilt feature with ratchet straps.
• Loading ramp for easier mounting and dismounting.

• 🚴 The bike rack and ramp is made from heavy duty steel and can haul capacities up to 500 pounds. The carrier also includes a pair of ratchet straps to help secure your ride
• 🚴 The hitch bike rack is 73.5” long X 31.5" wide X 5.5” with a total weight of 61 lbs & can load bikes with tires up to 5" wide. The hitch mounted bike carrier is finished with an anti rust coating for many years of use
• 🚴 Can to be used on all vehicles with a 2 inch hitch receiver so you can save space on your truck and enjoy your wheels in style
• 🚴 Anti tilt feature with 4 heavy duty ratchet straps and 4 loop straps to prevent your bike from shaking and wobbling during transit to avoid any damage or scratches to your motorized bike
• 🚴 CUSTOMER SATISFACTION: 3 Year Warranty - Our customers are our number 1 priority. If you have a questions or concerns about your dirt bike carrier please contact us and we will resolve any issues you may have. Transport your bike with ease!

User questions & answers

Question:	What country is this product made from
Answer:	Good morning Miller, Thank you so much for reaching out to us with any product questions you might have. Our Hitch Mounted Motorcycle Carriers are manufactured out of China. Please let us know if you have any further product questions. All the best, mockins : )
Question:	Could this bike rack hold 2 bicycles
Answer:	Not really, well it would need modifications. It was made for a motorcycle. Harbor Freight has a good one for 2 bikes around $50.
Question:	Will this fit a yz450f on it
Answer:	My drz125 fits on with an extra foot and a half left over
Question:	Does this bike rack come with a key or lock to secure it to the hitch so it can't get stolen
Answer:	Mine did not come with any locking mechanism. You could probably find some sort of lock or cable and put it through the hitch pin.

Product features

Features:

• Free up more space for your friends and family.
• Keep wet and dirty bikes from getting your vehicle muddy and messy.
• Sturdy steel construction with a corrosion-resistant powder coat finish.
• Simple & easy bolt-together assembly.
• Anti tilt feature with ratchet straps.
• Loading ramp for easier mounting and dismounting.

Product description

Eliminate the need to tow a bulky trailer with this convenient hitch mounted motorcycle carrier from Black Widow. Heavy duty steel construction, an impressive 500 lb. weight capacity, and an included anti-tilt locking device makes hauling your dirt bike, motorcycle, or scooter both easy and safe. The included self-storing ramp attaches to either side of the carrier to make loading and unloading a breeze and features and impressive 75-3/4” length. Usage Guidelines - Please note, hitch-mounted motorcycle carriers are not recommended for use on tow-behind trailers including 5th wheel and camping trailers. Never exceed the maximum tongue rating of your trailer hitch and be aware that your hauling weight may be limited by your vehicle’s suspension. Some vehicles may require air shocks or heavier springs to stiffen up the suspension and prevent sagging; check with your dealer to determine the carrying and hauling capacity of your vehicle. Motorcycle carriers are not recommended for use with hitch adapters or extensions

• Durable hitch-mounted motorcycle carrier for use with wheels up to 5" wide
• 45-1/2" long ramp installs on either side of the carrier and self-stores when not in use
• Includes a 5/8" hitch pin and anti-rattle device to prevent tilt and wobble
• Manufactured from durable, powder-coated steel with a 500 lb. weight capacity
• Designed for Class III or IV hitch receivers

User questions & answers

Question:	Will a dirtbike stand on its own on the carrier before being tied down
Answer:	No, I would have a second person hold the bike while a couple of tie downs are put on. Be careful the threads aren't clean and the bolts are too soft. I used it once, one of the bolts sheared off. Replaced the bolts with stainless steel, and chased the threads with a tap; M10 - 1.5
Question:	Can anyone give me an ID measurement of the hitch tube
Answer:	ITS EXACTLY 1-3/4" INSIDE TUBE SQUARE ON MINE
Question:	How far does the bike sit from the tow hitch
Answer:	I would say it sits about a foot away from the hitch
Question:	how wide is the inside of the carriers track? The product discription says 7 inches, but some reviewers say more like
Answer:	Yeah I would say from the outside is 7 inches and the inside is more like 5. Dirt bike cleats kind of hang on the rails an get squished when you ratchet it down.

Product features

Black Widow MCC-500 Steel Motorcycle Carrier

Eliminate the need to tow a bulky trailer with this convenient hitch mounted motorcycle carrier from Black Widow. Heavy duty steel construction, an impressive 500 lb. weight capacity, and an included anti-tilt locking device makes hauling your dirt bike, motorcycle, or scooter both easy and safe. The included self-storing ramp attaches to either side of the carrier to make loading and unloading a breeze and features and impressive 75-3/4” length.

• Manufactured from durable, powder-coated steel
• Designed for use with motorcycles, dirt bikes, and scooters with wheels up to 5” wide
• Designed for Class III or IV hitch receivers
• Ramp installs on either side of the carrier and stores conveniently on the carrier when not in use
• Loading ramp measures 45-1/2" L
• Includes a 5/8" hitch pin and anti-rattle device to prevent tilt and wobble

• Durable, hitch-mounted motorcycle carrier for use with up to 2 dirt bikes and motorcycles; comes with self-storing ramp that can be attached to carrier during transport
• Track measures 6' 3" L x 5.5" W; ramp measures 3" 9.5" L x 5.625" W; maximum 600 lb weight capacity; individual bikes must weigh less than 400 lbs
• Works with 2" Class III or IV hitch receivers; fits bike wheels up to 5.5" W
• Ramp installs either side for bilateral roll-on, roll-off action; includes anti-rattle device
• High-strength, lightweight aluminum construction

User questions & answers

Question:	can i use this to haul my golf cart
Answer:	Dear Customer, Regarding your question, please kindly refer to below installation guidance OR the instruction manual provided along with the product. Installation video is also available at your request. 1. Open the LED module, insert 3 AAA batteries (NOT INCLUDED) into the battery compartment of the LED module. 2. Inflate HALF of the ball (for your convenience to complete the 3rd step). 3. Insert the LED module at the bottom of the ball. 4. Inflate FULL of the ball and ready to use. We appreciate your visit at Ginniey and may you have pleasant shopping experience with us. For any further queries, please feel free to contact us. Kind Regards Ginniey Customer Service Team
Question:	How close dose the bike sit to the back of the truck? i plan on hauling 2 450r bikes
Answer:	My daughter was about 55 lbs and she was able to balance on it, so I think it would be fine.
Question:	Can this be used for a front hitch
Answer:	Hi, They are sold separately, so you may chose Red, Blue or Green. Regards, Poolmaster, Inc.
Question:	Can one of them be used for a bicycle? one for a dirt bike and one for bicycle
Answer:	Not sure but not but feels like rubber on the outside and grandson have jumped on it in the pool (11 and 13 years old) and it does not crack. Lots of fun

Product features

Black Widow Aluminum Double Dirt Bike Carrier

Double your carrying capacity with the Black Widow Double Dirt Bike Carrier, which allows you to transport up to two bikes at the same time. The versatile ramp can be installed on each side of the carrier, allowing your bike to be loaded and unloaded both forwards and backwards. Designed specifically for motocross, enduro, and off-road bikes, this lightweight carrier can carry up to 600 pounds between its two tracks, making it a great alternative to a bulky trailer with just as much hauling capacity.

Youth adapter accommodates child-sized bikes

The carrier holds adult or youth bikes easily with the included youth adapter bar so that the whole family can enjoy track day.

Roll-up/roll-off - load your bike from the left or right

Each carrier can be loaded from the right or left, allowing you to roll bikes up and down in the same direction.

Self-storing ramp

The loading ramp attaches directly to the carrier when it's not in use so that it can't be misplaced and won't take up valuable trunk storage space.

Black Widow - Motorcycle Carriers and More

Black Widow offers affordable loading, unloading and transportation options for powersports users with motorcycles, dirt bikes, ATVs, and more. Our motorcycle carriers are designed to provide a cost-effective alternative to hitching up a trailer, and allow you to easily roll your bike up and onto the carrier platform.

Product description

The T-NS-MRC001 is time tested and proven to be the most reliable solution for hauling motocross bikes, scooters and off road dirt bikes. It is made out of 100% heavy duty for added strength and durability. It is extremely portable and includes a loading ramp for loading your cycle on the carrier. Once loaded, the loading ramp attaches on the carrier next to the carrier track for easy transport. This motorcycle hitch carrier has a carrying capacity of 500 lbs. It fits a standard 2" square class II, III, IV, or V receiver.

From the Manufacturer

The T-NS-MRC001 is time tested and proven to be the most reliable solution for hauling motocross bikes, scooters and off road dirt bikes. It is made out of 100% heavy duty for added strength and durability. It is extremely portable and includes a loading ramp for loading your cycle on the carrier. Once loaded, the loading ramp attaches on the carrier next to the carrier track for easy transport. This motorcycle hitch carrier has a carrying capacity of 500 lbs. It fits a standard 2" square class II, III, IV, or V receiver.

• TMS presents this brand new motorcycle carrier. This is a great way to haul your motocross bike, scooters, and off road dirt bikes. Made of heavy-duty steel, the durable frame is powder coated to resist chipping, scratching, fading, and wearing. The carrier is made to fit a 2" square receiver for class II, III, IV, or V trailer hitches. It features a a dual sided loading ramp, making it very easy to load your bike.
• Features an anti-tilt locking device to prevent wobbling and includes tie down sites on either side of the track for added security. The T-NS-MRC001 is time tested and proven to be the most reliable solution for hauling motocross bikes, scooters and off road dirt bikes.
• Stop hauling your bikes in the bed of a truck taking up valuable storage space, and subjecting your bike to damage. With this carrier you are able to transport your bike with ease letting you focus whats really important, the enjoyment of riding.
• Designed to safely haul up to 500 LBS. Material : powder coated Steel. Color : Black .
• Hitch fits a standard 2" square class III, IV, or V receiver.

User questions & answers

Question:	We have a Yamaha BW200 with a front wheel thats 8.6" wide. I know it won't fit into the rack, but has anyone rigged up a front wheel chock
Answer:	It appears that it is!
Question:	Package arrived with NO INSTRUCTIONS. Where can I get a PDF or some directions
Answer:	Hello, Shawn! Bike Stand Size: 86 x 77 x 70 cm/33.8 x 30.3 x 27.6 " . Material: steel. G.W.: Approx. 10.5kg/23lbs.
Question:	Will this hold a 600cc sport bike or just dirt bikes and scooters
Answer:	Yes. It holds all bikes. Best thing for our garage
Question:	I can not figure out how the anti-tilt device works
Answer:	The product is not designed to be secured to the pavement. It is more for a home use, like in your garage or driveway. Definately not built for outside public use.

Product features

Heavy Duty Motorcycle Scooter DirtBike Carrier

This carrier is a reliable solution for hauling motorcycle, scooters and off road dirt bikes. Made of heavy duty steel for added strength and durability. It is extremely portable and includes a loading ramp for loading your cycle on the carrier. Once loaded, the loading ramp attaches on the carrier next to the carrier track for easy transport.

Carrier Ramp

Made by heavy duty powder coated steel. Weight capacity up to 500 lbs. 38 1/2 inch long. Main hitch tube is 18 inch long from center of hitch pin to center of ramp.It can be loaded from the left or right.The ramp can be mounted on the carrier when not use.

8 bolts for assembly

Easy to install,Assembles in quickly with only 8 bolts/nuts.

Anti Wobble

Includes anti-tilt locking device to prevent wobble. Fits any 2 inch square receiver, 2 inch square class III, IV, or V trailer hitch.

Product description

Premium motorcycle carrier from Direct Aftermarket provides convenient hauling capacity to your vehicle. Carrier is great for hauling many different types of cargo such as scooters, dirt bikes, street bikes, sport bike, or any other items. Constructed of weather resistant epoxy powder coated tubular steel, this heavy duty hauler can hold up to 500 pounds and features a loading ramp carried on the hitch. Ramp is built so the bike can be loaded from either side. The rack measures approximately 76 inches wide and 33 inches long. Loading ramp is 38 inches long and 5 inches wide. Compatible with Class III or IV trailer hitch and requires a 2" square hole (NOTE: hitch pin not included). Trailer hitch pin is not included. Includes: carrier, loading ramp, assembly hardware, and instructions.

• Anti-tilt locking device (prevents wobble)
• Epoxy powder coated steel frame construction
• Bike rack fits standard 2 inch hitch receiver
• Loading ramp attached and included
• Easy to assemble

User questions & answers

Question:	Are there tie down loops at the front or rear of the hauler, or just in the middle
Answer:	Tie down loops are just in the middle.
Question:	Ramp is too short. Any reccomendation for a longer fold ramp that will attach to this 5 1/4"W carrier. Most ramps are designed to attach to a tailgate
Answer:	I agree, the ramp is too short and falls off too easily
Question:	shows a pin and looks like it is part of the anti-wobble anti-tilt device, says pin not included so how or where can I find the correct pin
Answer:	You are good they just did not take their design one step further. The pin they included is your hitch pin. You have to shim the anti lock system inside the hitch solidly in place. Then slide the hitch into the receiver and carefully insert the hitch pin. They should have tack welded the anti tilt device inside the hitch. Once you get past that it’s a nice carrier. FYI the anti tilt is not needed but a nice to have.
Question:	I’m an avid motorcycle rider, but i have a mouse problem at home. could i use this rack to catch mice? or use the rack to train my cat to catch mice
Answer:	This rack is perfect for catching mice, but I think you’ll find better use in training your cat. Put this thing in an open space and start your cat on some basic agility drills. After they’ve mastered the drills on the ground lean the rack up against a wall and continue having your cat practice climbing. While the cat is practicing climbing you need to throw things at the cat. I found that water bottles, shoes, and soap work best. The reason for this is mice climb walls, so your cat needs to practice climbing. Sometimes your cat will encounter situations where it could fall off a wall while chasing the mice; throwing things at the cat will help it be better prepared for situations where it could fall off. Hope this helps.

Product description

This is a great way to your motocross bike, scooters and off road dirt bikes. It's heavy-duty steel frame makes it reliable and gives it strength and durability. It's portable in design and features a ramp, making it easy to load your bike onto the carrier. FEATURES: Loading ramp; Anti-tilt locking device (prevents wobble); Heavy-duty power-coated steel construction; Easy assembly (8 bolts and nuts); Made for a 2" square receiver (class II, III, IV, OR V trailer hitch); Multi-load (load from either side) SPECIFICATIONS: 500 lbs capacity; Main hitch tube: 18"(L); Loading ramp: 38.5"(L) x 4.75"(W); Carrier overall dimensions: 76"(L) x 7"(W) PLEASE NOTE:Trailer hitch pin not included

• Anti-tilt locking device. To get a updated version, you can search for the ASIN B07NP82M1T on Amazon.
• Loading ramp and Designed to safely carry up to 500 lbs
• Multi-load (load from either side).
• 2" square receiver (class II, III, IV, OR V trailer hitch)
• Carrier overall dimensions: 76"(L) x 7"(W)

User questions & answers

Question:	Will it carry a honda crf
Answer:	It should
Question:	Will this carry my yamaha wr400f
Answer:	I do not own a pole saw but if the pole is the standard size of a weed trimmer, then yes you should be good to go. Just a tip get another clip to lock in pole. For some reason they only give one flip over clip, makes no sense when you need two.
Question:	Will this be able to carry my honda 250l? Weights about 350 pounds
Answer:	A long, thin shanked lock will fit across both holes on one of the uprights to secure it in place.
Question:	How does one use the odd gizmo with a hitch pin, a U shaped aluminum plate and welded threaded block
Answer:	It's not tall enough unless you hang the cutter guard off the end of the trailer

• This is a great way to your motocross bike, scooters and off road dirt bikes.It's heavy-duty steel frame makes it reliable and gives it strength and durability. It's portable in design and features a ramp, making it easy to load your bike onto the carrier.
• Loading ramp; Anti-tilt locking device (Prevents wobble);
• Heavy-duty power-coated steel construction; Easy assembly (8 bolts and nuts); If you didn't receive any repies from us for more than one business day, please check your spam because we will reply to every message our customers send and maybe our messages were sorted to spam, thank you very much.
• Made for a 2" square receiver (class II, III, IV, OR V trailer hitch); Multi-load (load from either side)
• SPECIFICATIONS: 500 lbs capacity; Main hitch tube: 18"(L); Loading ramp: 38.5"(L) x 4.75"(W); Carrier overall dimensions: 76"(L) x 7"(W) PLEASE NOTE:Trailer hitch pin not included.

User questions & answers

Question:	Would this work with a rebel 250 (330 pounds fully loaded
Answer:	Pretty sure it would, I have a Yamaha 600 and that fits
Question:	Im put my sportbike on this 2020 r
Answer:	How much does the “sportbike” weigh? If it’s more than 500 pounds (approx 225kg) the answer is no. There is also a second factor. What is vehicle manufacturer’s tow hitch dead weight rating? This is different from the tow rating. The dead weight rating is the maximum downward weight recommended for tow hitch. This is the force exerted on the hitch if you (or the sportbike) stood directly on the tow hitch. This number varies greatly depending on the type of vehicle. Small cars might be only 300 pounds - or even zero. Large SUV’s might be 1500 pounds - or more. This information is usually found in the ovehicle owner’s manual. You can not safely exceed that deadweight hitch rating. The weight of the bike carrier must be considered in the calculation.
Question:	For a 600cc bike, that weighs 400 lbs, is there a way to keep the load stable
Answer:	My 250 makes the entire carrier sway around
Question:	Will a Yamaha roadstar 1700 fit
Answer:	Sure it would fit, it’s a very nice rack check the weight of your bike

Product features

Please Note:

Trailer hitch pin not included

Product description

Standard Features

Heavy-duty power-coated steel construction,steel powder coated construction

Load from the left or right, two sides load (Multi-load able to load from either side)

2" square hitch receiver (class II, III, IV, OR V trailer hitch)

Easy assembly (Assembles in quickly with only 8 bolts/nuts)

Steel loading ramp that mounts on carrier,anti-tilt locking device to prevents wobble



Specifications

Color: Black

Material: Steel

Weight: 51LBS

Loading Capacity: 500 LBS

Main Hitch Tube: 18" (L) long from center of hitch pin to center of ramp

Loading ramp: 38 1/2"(L) x 5 1/2"(W)



Fitment

Fits any 2 inch square receiver (class II, III, IV, OR V trailer hitch)



Package included

Hitch Mount Motorcycle Transporter

38 1/2" loading ramp

Hardwares

Pls note: Trailer hitch pin not included

• With its anti-tilt locking device, it can prevent wobble. Even if you are on the bumpy hillside, it will provide you a secure transport and keep your motorcycle safely behind your vehicle
• Made of heavy duty steel tubing,loading ramp and Designed to safely carry up to 500 lbs
• 2" square receiver (class II, III, IV, OR V trailer hitch)
• Multi-load (load from either side)
• Carrier overall dimensions: 76"(L) x 7"(W)

User questions & answers

Question:	Can anyone tell me what the piece with the cotter pin that fits inside the end of the carrier is supposed to do or how it works
Answer:	Don't know it never worked and the company never responded to my complaint.
Question:	Would this work with Curt 1 hitch
Answer:	1
Question:	Would this fit for a 450cc dirt bike
Answer:	Dear Customer, Regarding your question, our LED beach ball is made of high quality material with IP67 waterproof class and floatable nature. It is specially designed for water games, pool party and beach sport. You may also float the balls on the pool as decorations and mood light to cultivate desired ambience. We appreciate your visit at Ginniey and may you have pleasant shopping experience with us. For any further queries, please feel free to contact us. Kind Regards Ginniey Customer Service Team

• -Solidness and Durability: No need to worry about wobbly because our steel-made motorcycle carrier has enough strength and toughness to carry your bike firmly. The rack is also completely anti-rust coated so you can also take your bike even it’s raining. To get a classic style carrier , you can search for the ASIN B07YPRLPLY
• -Bearing Capacity: Maximum 600 LBS load will allow you to take not only light bikes but also some of those heavy motorcycles. 600 LBS load range will offer you multiple choices.
• -Variously Applicable: Mounts using your vehicle's 2" receiver, hitch pin included with is 3/4". Rail is 79" long with a raised adjustable wheel stop that serves as a stabilizing wheel chock.
• -Safe Transport Guaranteed: 2 quick release locks will help you to fasten your bike. Bumpy hills will not concern you anymore during the ride, it will provide you a secure transport and keep your motorcycle safe behind your vehicle.
• -Package Includes & Easy Installation: You will receive 2 packages for your purchase and it may not arrive at your place at the same time, so please be patient with the shipment. All the hardware is included!! 100% Customer Satisfaction Guaranteed from Order Placement through Installation. Please feel free to contact us for any questions and we promise you we will response you in 24h.

User questions & answers

Question:	I have a 06 gsxr 1000 will this support the weight i believe the bike is just under 500 lbs
Answer:	I was thinking mine did (I've only used it once since I bought it). Been just riding to the local trail. I still had some play in it. So, I bought a $10 anti-rattle hitch tightener. One extra step each time to put on/take off. But, it holds it solid! Hope that helps?
Question:	Will this work on a 2in hitch 2019 Ford F
Answer:	I use an anti-rattle thing-a-ma-jig. Works great! The only thing that sucks is once you tighten it down, you need to remove it if you want to take the bike rack out! Pick your battles! I just keep the right wrench in my vehicle for such an occasion.
Question:	How much does this rack weigh
Answer:	FL has toll roads that are PAY BY PLATE ONLY. They want that money. Towing a travel trailer blocks the license plate from view but have their own plate, there is no law against hauling a trailer that is not registered to you such as a u-haul trailer you rent, or a trailer you are borrowing from a friend. If you drive on a toll road, whoever the trailer is registered to will be getting the bill.
Question:	I have a ninja 400 will this hold it and do it come with the straps to tie down the bike
Answer:	My hubby assembled this in about 15 minutes and said it wasn't hard at all (He IS very capable with tools). As far as using the bike, I LOVE THIS BIKE RACK! I am a 61 year old female in fairly good shape and from the time I walk out into the garage and the time I go back in the house, it takes me less than 10 minutes to put the bike rack on the car, place the locking bolt (which I definitely would recommend) and put the bike on the rack. Taking the bike off and putting it on takes 10-20 seconds. The only complaint I might have is that sometimes loosening the clamps that push down to hold the bike on the rack can be hard to loosen when removing the bike. They are made like a rachet that moves up and down the center shaft, so if you push them down on the bike really hard, which of course is what you want to do, they can be hard to 'squeeze' to open the clamp.....BUT, remember, I have 61 year old hands and not much strength in them. My spouse tells a little WD-40 might help, so we'll try that next time we use the rack. But don't let this one small thing change your opinion. I absolutely love this bike rack and would never buy any other, as a matter of fact, we have two of them!

Product features

Package Includes & Easy Installation

You will receive 2 packages for your purchase and it may not arrive at your place at the same time, so please be patient with the shipment. All the hardware is included!!

• MULTIPLE USES - The durable motorcycle carrier can support up to 450lbs, which can stabilize and level most motorcycles and bikes; A necessary tool for all motorcycle enthusiasts
• EXCELLENT DESIGN - Features reasonable design, it allows motorcycles to load or unload from both sides; It is suitable for wheels up to 5-1/2" wide and Class III or IV hitch receivers; Equipped with pluggable screws, it is easy to bring your bike wherever you want to go
• PREMIUM MATERIALS - Made of a high-quality aluminum material and will not rust and is lightweight enough for people to carry and use
• EASY INSTALLATION - A useful product, the motorcycle carrier can be easily assembled and operated, reducing the hassle of a hooking up and pulling a trailer around each you want to ride
• SAFE & RELIABLE - It allows you to easily park your vehicle in a garage or parking space without removing the carrier, making it safer to drive when you don't haul your motorcycle

User questions & answers

Question:	Will this work on a front hitch with a 4” clearance
Answer:	4" seems really low. I would check with seller.
Question:	Does this carrier fit 150/70/18 tire size
Answer:	Dear Customer, Thank you for your question. This motorcycle carrier is suitable for wheels up to 5-1/2" wide and Class III or IV hitch receivers. Please do not hesitate to contact us if you have any other questions. Best wishes, VIVOHOME Customer Care
Question:	Can I add a bike rack to this carrier
Answer:	No. Besides, if you rigged something up the wobble, over time, would destroy the carrier
Question:	Any chance you could ship this faster
Answer:	Check with seller.

Product features

SPECSTAR AMC-400 Hitch-Mounted Aluminum Motorcycle Carrier

Do you need a quick, safe, and easy way to put motorcycle or bike? There is no doubt that choosing the SPECSTAR motorcycle carrier is the best way to ride. It helps to reduce the hassle of hooking up and pulling a trailer around each time you want to ride.

Know More About Product:

Material: Aluminum

Load Bearing: 450lbs

Package Dimension: 76.37 x 8.26 x 5.51 inch

Package Weight: 44.77lbs

Product Dimension: 75.78 x 32.67 x 4.13 inch

Package Included: 1 x bracket, 1 x ramp, 2 x fixed triangular support, 1 x support bracket, 1 x connector, 4 x bundling belts, 1 x bag of screws accessories, 1 x manual

Fixture Device

Features insertable screws and ties on both sides of the track that prevent swinging and improve security.

Easily Haul

The reasonable design allows motorcycles and bikes to be loaded or unloaded on either side of the vehicle.

Premium Material

Made of a high-quality aluminum material and will not get rusty, the motorcycle carrier is lightweight enough for people to carry and use.

Product description

Feel like you're running out of room? Moving your Motocross Bikes just got easier!



Have two bikes? You and your friend need a quick, safe and easy way to get from track to track? What you dont want is the hassle of a hooking up and pulling a trailer around every time you want to ride. Right? Right! The Moto Dual Motorcycle Carrier is just what youre looking for. Not only is it quick, easy, and secure but priced right!



This dual motorcycle carrier is designed for off road dirt bikes, motocross bikes, and some scooters with up to 5 1/2" wide tires and will fit motorcycles and scooters up to 75 inches long.



HOLD ON this carrier comes with a lightweight loading ramp that conveniently attaches onto the carrier for transport.



This unit works great for Pick up trucks, Campers, RV's , Vans, and SUV's



1. Brand NEW!

2. Maximum carrying capacity of 600 lbs (300 per bike).

3. Fits in a 2" square class II, III, IV, or V - trailer hitch.

4. Anti-tilt trailer hitch locking device (prevents the carrier from rocking).

5. Loads from the left or right

6. Approximate weight 70lbs

7. 5.5 inches useable tire width

8. Lightweight aircraft aluminum material

9. Grey powder coated steel sub-frame!

10. 2 tie down loops (1 in front and 1 in back)

11. Rust free!

12. Assembles in minutes!

13. Heavy duty anti-wobble design!

14. Trailer hitch pin is not included

15. Ships fully INSURED by UPS!

16. TWO year warranty from purchase date!



There isn't an easier way to haul your bikes wherever you need them to be! Note: Each individual rail has a distributed capacity of 400lbs and is stickered as such. The carrier has a total rated capacity of 600lbs. We likely could have rated this carrier at higher than 600lbs capacity but asked the factory to be conservative in rating the overall capacity because keeping your bikes safe is our top priority.

• Constructed from lightweight aircraft aluminum which means no rusting.
• Easy loading ramp loads from either side.
• Our Anti-wobble uses 3 locking screws to prevent wobble. Some of our competitors use only 2.
• This unit works great for Pick up trucks, Campers, RV's , Vans, and SUV's
• Fits in a 2" square class II, III, IV, or V - trailer hitch.

User questions & answers

Question:	I’m looking to put this on a travel trailer. Does the trail hitch receiver gross tongue weight have to be higher than the two bikes and the carrier
Answer:	Hello - This rim is made with robust construction and has a unique patent pending design for the set. If you ever need us, you can always reach out to our customer service team, as this set is covered under our warranty. We stand behind our products 100% and are always happy to assist you further.
Question:	Can I tow my car on a car dolly behind this
Answer:	Hello - The base is 16.77" wide and 3.55" tall. The base has a slight incline upward, making it a total depth of 26" deep. Please let us know if you need anything else and we are happy to help.
Question:	Any reason that this would not work for two fat tire ebikes
Answer:	Im so glad you asked this. I forgot to drain mine. Ha. It appears to be the same hole plug where you put the water in. Not too bad to drain though. No plug at the bottom, or one i could find.
Question:	One customer says this is rated for 400 lbs. not the 600 lbs. advertised? Would 2 Honda Metropolitans fit on this
Answer:	I believe it was made in China.