14 best tail light tint spray

Product description

VHT SP999 Translucent Black Nite Shades is a transparent black tail light lens coating for creating custom European styling. When applied to tail lights, fog lights, or turn indicators, VHT Nite Shades appears black until they are lit, then the natural red color appears. Recommended for off-road use only. WARNING once applied to plastic lens SP999 is not able to be satisfactorily removed. Application instructions are also detailed on each can.

• Nite shades is a transparent black tail light lens coating
• Light lens coating for creating custom European styling
• Black until they are lit, then the natural red color appears
• Recommended for off-road use only
• This item is not for sale in Catalina Island

User questions & answers

Question:	Can I use this on by cars front badge, emblem, for a smoked look
Answer:	All these naysayers! If you're talking about a chrome emblem and you want to "smoke" it to get a kind of black chrome effect I don't see why this wouldn't work. Just use some moderation so it doesn't turn out solid black.
Question:	So if i put this on a pair of glasses i will be able to see through them
Answer:	Try it on cheap sunglasses, it gives an amber tint to everything, I mow my 5+acres with some safety/welding glasses I halfassed sprayed with it.........actually cuts down those midday sun headaches.Spray real light coats not heavy or it'll splotch and run, paint it on the inside of the shades.
Question:	Will this be ok to tint my headlights with as well
Answer:	Also, check your local laws. In many states it's illegal to apply any tint to headlights. If you have state inspections, it may not pass.
Question:	i want a glossy look on my head/tail lights,. Is this a flat black or will it be gloss/shiney look
Answer:	it will have a slight gloss, almost more like a satin look.... to properly apply to give the best "OEM" gloss appearance...wetsand the lights with 1000 grit.cleanapply 2,3, or 4 coats of nightshade, depending on the darkness you want.allow 24 hours to curewetsand with 2000 grit to get out imprefectionswashapply 3 to 4 coats of clearallow 24 hours to curewetsand with 3000 gritwashuse a plastic polish and polish until you get a glass like finish...if you follow this and do not rush it, allowing time to cure, you will have a oem glossy finished product...

Product features

VHT Nite-Shades

VHT Nite-Shades is is a translucent lens coating for creating custom styling. Also be used to restore faded or scratched lenses. Ideal for use on tail lights, fog lights and turn indicators. Warning: Once applied to a plastic lens, VHT Nite-Shades cannot be satisfactorily removed. For off-road use only.

Product description

Rust oleum lens tint spray paint, series: specialty, aerosolized mist, liquid, translucent Black, 10 oz capacity, aerosol can packing, pigment: proprietary, vehicles: modified alkyd, acetone, aromatic hydrocarbons thinners, 8 - 10 sq.-Ft/can coverage, 50 - 90 deg F, -156 deg F flash point, 525 G/L VOC, 0.723 specific gravity, solvent like odor/scent. Rust-Oleum lens tint creates a silver appearance on tail lights, side markers and turn indicators. When lights are engaged the natural color shows through. Recommended for off road use only.

• Translucent Black customizable coating
• Any angle spray technology
• Comfort-tip spray nozzle
• Model number: 253256

User questions & answers

Question:	Can this be used on the shield to block the sun
Answer:	Umm no, unless you wanna ruin whatever you spray it on
Question:	is this remobable if i dont like it
Answer:	I made a big mistake and put a super thin coat on my LED factory headlights. The output was reduced so much that I removed the film from the headlight lens with carburetor cleaner. Spray a small amount on a rag and wipe off. Rotate the rag to a clean spot and do it again. Does not hurt the plastic headlight lens.
Question:	Is it going to be stick on my car paint if I accidently paint it
Answer:	Yes it will, be sure mask off any spots you don't want to get paint on within 2 or 3 feet of the lights your spraying. Paint in light layers and don't get to close with the can because it will run. If you do get overspray on the paint the only way to get it off it to wet sand it off.
Question:	could I see through this if I spray it on a plexiglass lens for a helmet
Answer:	No.. It looks opaque and sketchy. Like if you sprayed chocolate milk on it. Try window tint film or buying the tinted visor from the helmet manufacturer.

Product features

Rust-Oleum 253256 Specialty Lens Tint Spray Paint

Create the custom look of “blacked out ” tail lights—while still keeping brake lights and turn signals visible—with Rust-Oleum Automotive Lens Tint Spray. This translucent coating gives a trendy, custom look to tail lights, side markers and turn indicators.

• Translucent black customizable coating
• Any angle spray technology
• Comfort-tip spray nozzle

For Best Results

To ensure lights show through, do not exceed more than 3 coats.

Product description

You can change the look and color of your entire vehicle, add a racing stripe or customize your wheels in a few simple steps. Custom wrap provides a smooth, professional-looking finish that resists the wear and tear of daily driving.

• Provides a smooth, professional-looking finish that resists the wear and tear of daily driving

User questions & answers

Question:	Will this work on chrome moldings
Answer:	Yes it will.
Question:	Horn many bottles you for a car
Answer:	Depends on how big the car is...for a coupe you would probably need 50 cans because you would want to do more than 1 coat
Question:	Can I use this to paint the hood of my car
Answer:	Yes, I used it on my wheels and it worked great!
Question:	Does it come with the step 1 prep coat. If not where can you buy it. Dupli color said it should come with cuz its needed
Answer:	you get the 1 can and you use this over your base coat

Product features

Custom Wrap Automotive Removable Paint

Dupli-Color Custom Wrap is specifically formulated for automotive customization. Custom Wrap provides a smooth, professional looking finish that resists the wear and tear of daily driving. To try a new color or go back to the original surface, this exclusive formulation also features our EZ Peel Technology for quick removal. Ideal for application over: OEM painted surfaces, aluminum, metal, chrome and plastic.

TIp: Remove or recoat after 6 months as Custom Wrap is a temporary removable coating.

Product description

Give your car a Euro look with ColorBond Pro Tech Translucent Black Tail Light Color. Darken any set of tail lights with our tail light tint spray to create a cool, customized look in no time. Inexpensive and easy to apply, ColorBond's tail light paint is a favorite of professionals and enthusiasts alike. Great for tail lights, fog lights and turn indicators, Pro Tech Translucent Black Tail Light Color will create a blacked out look until they are lit. Go dark with taillight tint from ColorBond.

• Darken any set of tail lights with our tail light tint spray
• Create a cool, customized look in no time
• Also great for fog lights and turn indicators
• Best Application Temperature: 65 – 75 degress Farenheit
• Inexpensive and easy to apply

Product description

Fit For:

Can Be Apply On All Vehicles



Package Content:

1 X 110ml Orange Tint Spray



Specification:

100% Brand New, Never Been Used or Installed

Can Be Apply on Headlights, Corner Lights, Side Marker, Daytime Running Light, etc

Gives Your Vehicle A Sporty Aggressive Look

Basic Instruction:

1. Clean The Lens Completely and Wait for 5 - 10 Minutes Until Completely Dry

2. Spray The Paint From 15 - 20cm Distance

3. Wait For 15 Minutes Than Re-Spray Again For 2 - 3 Times (Wait About 15 Minutes For Each Time)

4. Wait For Paint Completely Dry For At Least 24 Hours After Spray-on

***NOTE: Do NOT Over Spray***

• Can Be Apply On All Vehicles; Can Be Use on The Lens of Headlight / Tail Light / Side Makers etc ***Do NOT Recommend To Apply On Window
• Made In Japan; With Quality Guarantee
• Upgrade Your Vehicle For A Sporty Racing Style Appearance
• Easy To Use; Just Simple Point and Spray

Product description

Brand New In Original Packaging. Paint for all Headlights / Tail Lights / Bumper Lights/ Corner Lights / Side Markers / Fog Lights. JDM Lens Painter. Made In Japan. Net: 80ml

• Brand New In Original Packaging
• Paint for all Headlights / Tail Lights / Bumper Lights/ Corner Lights / Side Markers / Fog Lights
• JDM Lens Painter
• Made In Japan
• Net: 80ml

User questions & answers

Question:	is there enough to do two cars
Answer:	It depends on how many coats you put on. I used three coats and there wasn't enough for a second car.
Question:	What color is it
Answer:	"Smoke" Same color as the cap.
Question:	Is the finish glossy or mat? Does the shade come out evenly
Answer:	They come out nice but they are not glossy

Product description

Fit For:

Can Be Apply On All Vehicles



Package Content:

1 X 110ml Blue Tint Spray



Specification:

100% Brand New, Never Been Used or Installed

Can Be Apply on Headlights, Corner Lights, Side Marker, Daytime Running Light, etc

Gives Your Vehicle A Sporty Aggressive Look

Basic Instruction:

1. Clean The Lens Completely and Wait for 5 - 10 Minutes Until Completely Dry

2. Spray The Paint From 15 - 20cm Distance

3. Wait For 15 Minutes Than Re-Spray Again For 2 - 3 Times (Wait About 15 Minutes For Each Time)

4. Wait For Paint Completely Dry For At Least 24 Hours After Spray-on

***NOTE: Do NOT Over Spray***

• Can Be Apply On All Vehicles; Can Be Use on The Lens of Headlight / Tail Light / Side Makers etc ***Do NOT Recommend To Apply On Window
• Made In Japan; With Quality Guarantee
• Upgrade Your Vehicle For A Sporty Racing Style Appearance
• Easy To Use; Just Simple Point and Spray

Product description

Model Master Spray Enamel Clear Transparent Black Window Tint 3oz. #1634

• Spray Paint

User questions & answers

Question:	Can this be used on Jeep soft top windows
Answer:	I don't know. The best way would be to test it on a similar piece of material. I will say that the paint spray was very thin and did not cover to my satisfaction. My intent was to tint a clear plastic faceplate bezel for a radio, but after trying it out on other clear plastic parts I wasn't happy. I ended up not using it at all. Your mileage may vary.

Product description

Why is headlight protection so valuable ? It has been estimated that on average 1 out of every 6 automobiles will require headlight replacement due to damage from road debris. Replacing headlight components can be an expensive and time consuming process, the average headlamp set costs $450 to replace. Plastic headlights tend to dull and lose their transparency, glass headlights tend to break and fracture as they wear. what tools do I need for install headlight tint? Vinyl Squeegee (Credit Card /w cloth wrap will work) Soft Cloth Towel Spray Bottle with soapy water Hair Dryer or a Heat Gun How to Install Headlight and Tail Light Tint film? 1. Clean the surface of the Headlight or Tail light with soap and water to ensure all debris are removed from the surface of the Tail Light. 2. Carefully remove the Overlay from the sheet and spray the overlay's adhesive side with Soap and Water. The Soap and Water will prevent the Overlay's adhesive from sticking while you apply it the Tail Light. 3. Carefully apply/align the Overlay on the Tail Light and smooth out as much crease as possible by using your fingers. Use the vinyl squeegee to push out all the soapy water on the front face of the Tail Light. The more soapy water you push out the less bubbling there will be. Note: Make sure the crease are evenly distributed on the Overlay, therefore you can easily smooth it out with a heat Gun and Squeegee. 4. Carefully pull and fold the side inward. If necessary, use the hair dryer to soften up the vinyl and squeegee out all the crease. 5. Heat up the excess vinyl (heating up the vinyl will soften it and makes it easy to trim) and trim. Note: Don't worry if you over stretch the vinyl. Any excess vinyl protruding can be easily removed using a knife.

• 1 piece 12 by 48 inches
• Self-adhesive, peel and stick
• Stretchable with heat and water resistant
• Easily cleansed with water and easy to remove without residual

User questions & answers

Question:	Is the light black 50% tint
Answer:	Yea. It's good enough the tint I love it how it looks on my car. Light black is not too dark not too clear. Take a look of the pictures I've post. Some people like dark but not for me, light black looks more clean-nice
Question:	Does it fit a 2017 tundra trd pro
Answer:	Yes... it will fit... it's just tint... it fits any make or model...
Question:	Does it offer any UV protection
Answer:	+SPF5 ADDED TO CLERIC
Question:	Can you use water and a drop of soap to apply this? I saw a comment saying not to use water, but it was posted by a non-professional
Answer:	I didn't use water or soap to apply it, It went on smooth and easily without.

• VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!
• This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
• This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
• Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
• NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 1.49ft x 60"

User questions & answers

Question:	If i were to wrap my whole tail light , could i then cut out the center so my leds and some red stand out better than the rest of my lights
Answer:	You can but remember you can permanently damage the plastic. I reccomend purchasing knifless tape, Vvivd has knifless tape available and so does 3M. Knifless tape will allow you to accomplish an idea or just about any custom design your looking to accomplish when cutting vinyl. Knifless tape is a product that has a durable string underneath the tape when lifted can release the string to cut through vinyl without using an exacto blade and run the risk of permanently damaging your lense, trim, or paint. Vvivid has afforable knifless tape and works great, i reccomend checking out what 3M has for knifless tape as well due to their variety.
Question:	After I install the tint, will I still be able to take off my brake light cover with no problem, without messing up the tint
Answer:	If you have screws that go through the outside of the light then take them out and form the tint into the pocket, then poke a hole for the screw(s). Duh
Question:	Is this available without tint
Answer:	whats the point without any tint ?
Question:	Does this effect blind spot sensors
Answer:	Blind spot sensors are in the bumper not lights

Product description

Kit Includes

1 Driver side fender tail light overlay

1 Driver side hatch door tail light overlay

1 Passenger side fender tail light overlay

1 Passenger side hatch door tail light overlay

1 Extra overlay for practice

Microfiber cloth

Prep spray

3" mini medium stiffness squeegee



Description

Luxe LightWrap is the easiest tint film to apply on the market. Our tint is applied dry unlike other tint films and can be repositioned until placement is perfect! Luxe LightWrap is manufactured in the U.S.A.

• dry application vinyl tint
• air release channels for easy application
• re-positionable overlays that can be pulled off during installation & reapplied
• custom designed overlays for your car
• cast vinyl

User questions & answers

Question:	how long should I wait to wash the car after installation
Answer:	I actually waited 5 Days because I also had my front windows tinted. When I did wash the car there were no issues at all. Hope this helps
Question:	What about the dodge emblem in the slimmest part of the track light? you have cut outs for that? i would just assume take the badge off and putty it u
Answer:	There are no cut outs for it. There are four different pieces, left and right of the tail gate lights and then same for the taillights. Since there are no lights around the dodge emblem there is no need to black it out.
Question:	Do you have a lighter tint? I live in Arizona and the law is that the brake lights should be at least 300 ft. visible
Answer:	Unfortunately we currently do not as of now but we are working on adding more options.
Question:	how long should I wait to wash the car after installation
Answer:	I was after 3 days

Product description

Why is headlight protection so valuable ?It has been estimated that on average 1 out of every 6 automobiles will require headlight replacement due to damage from road debris. Replacing headlight components can be an expensive and time consuming process, the average headlamp set costs $450 to replace. Plastic headlights tend to dull and lose their transparency, glass headlights tend to break and fracture as they wear. what tools do I need for install headlight tint?Vinyl Squeegee (Credit Card /w cloth wrap will work)Soft Cloth TowelSpray Bottle with soapy waterHair Dryer or a Heat GunHow to Install Headlight and Tail Light Tint film?1. Clean the surface of the Headlight or Tail light with soap and water to ensure all debris are removed from the surface of the Tail Light. 2. Carefully remove the Overlay from the sheet and spray the overlay's adhesive side with Soap and Water. The Soap and Water will prevent the Overlay's adhesive from sticking while you apply it the Tail Light. 3. Carefully apply/align the Overlay on the Tail Light and smooth out as much crease as possible by using your fingers. Use the vinyl squeegee to push out all the soapy water on the front face of the Tail Light. The more soapy water you push out the less bubbling there will be. Note: Make sure the crease are evenly distributed on the Overlay, therefore you can easily smooth it out with a heat Gun and Squeegee.4. Carefully pull and fold the side inward. If necessary, use the hair dryer to soften up the vinyl and squeegee out all the crease.5. Heat up the excess vinyl (heating up the vinyl will soften it and makes it easy to trim) and trim. Note: Don't worry if you over stretch the vinyl. Any excess vinyl protruding can be easily removed using a brand new exacto knife.

• Stretchable with heat and water resistant
• Self-adhesive, peel and stick
• Easily cleansed with water and easy to remove without residual
• Color: Clear
• Size: 12''X72''

User questions & answers

Question:	Is this product removable
Answer:	Yes, any tint is removable, this brand seems to be the "self-adhesive" which applies much like a sticker, you can heat it up with a torch to make it stretchy and bendy, but also like a sticker, you can just peel it off, there may be some residue that you can just scrub off lightly.

• The thickest and most resistant headlight tint available. Highly resistant to scratches, rock chips and projected head from the headlight itself.
• Unique hex cell pattern is embedded into the tint and not just printed on the surface. Never worry about fading or scratching!
• Ultra-Clear Adhesive allows you to lift and reposition this tint multiple times without risking fingerprints, glue lines or marring. Dry application requires no messy liquids!
• New and improved vinyl formula developed in Canada reduces the risk of shrinking or peeling almost completely.
• Incredibly high gloss finish reduces the appearance of of the “orange peel” adhesive texture.

User questions & answers

Question:	Will one wrap cover head lights and tail lights? 2014 Kia Optima
Answer:	I think a 60" roll is barely enough for the headlights, measure the length from the farthest corners of your headlight, add about 4 inches, double the total and see if it's enough. Those headlights are very long. You could heat the wrap to stretch it but you will distort the nice hex pattern.
Question:	Received film with no toolkit. Returning. Anybody else
Answer:	Can't remember if mine was supposed to.
Question:	Will this fit my BMW x3 2005 2.5i
Answer:	As long as the dimensions of your lights are smaller than the tint. This is a "universal fit" product and requires that you cut and fit. Heat gun highly recommended as well as watching some YouTube videos on dry tint application.
Question:	What’s the optimum temperature for application of the film? It’s winter, I have a heat gun and my truck is under a non heated car port. Thanks
Answer:	Not sure of what actual temp needed, I used my heat gun until the film because a bit stretchy and moldable. But you can over heat it. Use a small piece to practice to find the right temperature.

Product features

NEW TECHNOLOGY AND IMPROVED PERFORMANCE

VViViD tints deliver the full clarity of light transmission in a thicker, more protective vinyl than our previous generation of XPO headlight / taillight films. We've listened to our customers, and we know you want a finish that doesn't just look good today, but will continue to impress for years to come.

NO LIQUIDS

AIR-TINT lets you avoid a chaotic and arduous wet application and all of the extra products and formulas required by other vinyls. AIRT-TINT features our air-release technology, which is applied dry and adheres to surfaces with ease.

NO STRESS

AIR-TINT feature our Repositionable, Ultra-Clear Adhesive, allowing you to reposition this tint multiple times without risk of glue lines, finger prints, or marring, and it will look crystal clear every time!

NO LIMITS

AIR-TINT films are designed to conform to any difficult surface that would otherwise be impossible for standard headlight tints. Made specifically for ease-of-use, these films are perfect for DIY-ers, no skills required!

• BLACKED OUT - LightWrap is created with rich pigments so you get a deep glossy blacked out look
• VEHICLE SPECIFIC - Exact cut to best fit your 2015, 2016, 2017, 2018, 2019, & 2020 Dodge Charger
• HIGH QUALITY - LightWrap is a cast vinyl, so it won't shrink, and it is durable and made to last
• EASY INSTALLATION - LightWrap has air-release channels making a bubble free installation a breeze
• THE ORIGINAL - We invented LightWrap vinyl, which is used globally by professional restylers

User questions & answers

Question:	Is it DOT approved
Answer:	It’s not DOT approved but never had any issues.
Question:	Does it cover any part of the lighted parts of the taillights or reverse lights
Answer:	Yes . It covers the entire clear part of the tail light cover . All of the lights are still visible though . It looks so much better. Worth it !
Question:	I know it says 2015-2018, but does anyone know if it will fit on 2019 Scat Pack Charger
Answer:	Yes it will fit a 2019 Scat Pack.
Question:	will this fit for 2019 charger R/T
Answer:	I'm pretty sure the taillights on the 2019 are the same as the 2018 . They should go on with no problem .