8 best philips led tail lights

Product description

A breakthrough innovation for your vehicle lighting: replace your light with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out. And thanks to our 12+ years lifetime, you will likely never have to replace them again. The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, glove box lights, and license plate lights. All backed by our 12-year limited warranty.

• Add style to your ride with Philips Vision LED
• Vision LED lights last 12 years, guaranteed. With Vision LED, your lighting will be on the cutting edge now, and for years to come.
• Interior lighting: 6000K Bright white light
• Exterior lighting: Fast response time thanks to instant-on capability. Red intense light for stop/tail and 6000K white light for back-up applications
• First to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs.
• Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, glove compartment lights, trunk lights, and license plate lights.
• Original equipment quality seal for the most reliable performance
• LED lights by Philips, for over 100 years we have been continuously innovating automotive lighting

User questions & answers

Question:	does it have a projector on top
Answer:	It honestly just depends if you leave them on or not my kids opened theirs a couple months ago they didn't leave them running only when playing with them they still work today. Hope that helps. These were a great buy and I would definitely buy them again. Also my youngest had one that wouldn't turn off she got mad and threw it at the floor and it worked after.
Question:	are they brighter than oem
Answer:	No, you can't set one color and it's a variety of flashing colors.
Question:	Has anyone used this bulb behind an amber lens? Did the light still appear orange? Or did it appear red? I was thinking of using these in my front
Answer:	INDIVIDUAL PACK IS 6 X 4 X 1 INCH THE 24 PACK IS 8.7 x 8.54 x 4.21 inches
Question:	What is the power consumption? I doubt only 2 watts, not enough for OEM 25w incandescent brightness equiv, even given red LED passing thru reflector
Answer:	yes, you need a new one. I just had this happen and after purchasing just the mouthpiece, go to go again.

Product features

A breakthrough innovation for your vehicle lighting

Replace your standard car lights with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out.

The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, and license plate lights. All backed by our 12-year limited warranty. Please visit our website for more information on the warranty program.

Interior lighting: 6000K Bright white light

Upgrade your style with the latest technology. Light up your vehicle interior with our Philips Vision LEDs that provide 6000K bright white light, giving your car that added style with power and illumination with the latest LED lighting trend. Brighten up your vehicle interior lighting and go from yellow to white light with Philips Vision LED.

Exterior lighting: Fast response time

Unlike a standard incandescent bulb that actually takes time to light up, Vision LED lights illuminate instantly with an intense red light for stop/tail lights. That means when you brake, the vehicle behind you can react immediately. The instant-on capability of the Vision LED lights can actually reduce braking distance by up to 20 feet at 75 mph.

For back-up lighting, the brilliant 6000K bright white light immediately stands out and is perfect for cars with back-up cameras, by illuminating the view behind you.

Street-legal LEDs

First to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs. They are street-legal because their ground-breaking design allows the light beam to be focused exactly where it's needed, on the road.

Philips Vision LED: FAQ

Its groundbreaking design is what makes Vision LED stand out. Light output of an LED bulb is not necessarily related to the number of LEDs mounted on the bulb, but it is all about filament position. By mounting the LEDs in filament position, we get the maximum light output on where it needs to be, on the road. This filament position allows us to meet the light output of an incandescent bulb, thus make them street-legal. In addition, due to its design, the LEDs are extremely robust and shock- and moisture proof and capable of handling voltage surges without failure.

My LED doesn't light up after installation. Why does this happen and how can I solve this?

If your LED doesn't light up, its likely that you need to flip the LED.

Why does this happen?

Regular incandescent bulbs can draw current in either direction, there are no 'positive' or 'negative' sides on the bulb. The bulb will work regardless of which direction it is inserted. LED bulbs, however, only draw current in one direction. Basically, this situation can be compared to batteries that have a positive and negative side. So if the LEDs are inserted incorrectly, they will not work. The solution is to simply flip the LED!

Follow these steps to reverse the polarity:

1. Remove the LED from the socket.

2. Flip the LED.

3. Insert LED back into the socket.

4. Check to ensure the LED lights up.

After installation: I notice fast flash or dashboard errors about a failing bulb. What should I do?

Error messages appear because the LED bulb wattage is much lower than conventional bulbs, which can make an outage warning system unable to detect the bulb.

If your car has a dashboard error message, experiences fast flash or goes in limp mode upon installation of an LED bulb, you may consider to purchase and install a Philips Vision LED CAN-bus warning canceller solution.

The 5W CAN-bus is used for interior applications, and license plate lighting. The 21W CAN-bus is used for exterior applications.

• Add style to your ride with Philips Vision LED
• Vision LED lights last 12 years, guaranteed. With Vision LED, your lighting will be on the cutting edge now, and for years to come.
• Interior lighting: 6000K Bright white light
• Exterior lighting: Fast response time thanks to instant-on capability. Red intense light for stop/tail and 6000K white light for back-up applications
• First to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs.
• Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, glove compartment lights, trunk lights, and license plate lights.
• Original equipment quality seal for the most reliable performance
• LED lights by Philips, for over 100 years we have been continuously innovating automotive lighting

User questions & answers

Question:	Is it error free and canbus for Mercedes C
Answer:	The case is approximately 1.5mm thick. The raised lip on the edge is about 1.5mm above the screen. The measurements are just approximate because the material has soft rounded edges.
Question:	Will this fit krator motorcycle fog lights
Answer:	yes
Question:	led headlights for the 2006 hyundai elantra
Answer:	I don't think it's bulky at all. It's a nice, protective layer of flexible plastic that doesn't add perceptibly to the phone's weight.
Question:	is it fit for golf 4 2003 Tail Lights
Answer:	Yes, the case does raise a bit over the screen edge and the camera's edge to protect them.
Question:	Will this bulb fit vrscaw 09 v rod break light
Answer:	The quality is very good like my phone has fell a few times and the phone is good it protects the phone very good
Question:	Can this be used for brake, run, and turn lights
Answer:	Yes. Your phone can charge with this case. There might be something wrong with your charger. Also make sure your phone is aligned correctly on the charger.
Question:	The car shows a sign “fault stop light” with LED light, because they have highly resist to energi o no continuity, are this light different
Answer:	This phone case has no holes for wrist strap
Question:	I am looking for the brake/tail light for a Jetta 2003. Which of the Phillips will work
Answer:	It is like it’s not even there. Works perfectly.

Product features

A breakthrough innovation for your vehicle lighting

Replace your standard car lights with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out.

The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, and license plate lights. All backed by our 12-year limited warranty. Please visit our website for more information on the warranty program.

Interior lighting: 6000K Bright white light

Upgrade your style with the latest technology. Light up your vehicle interior with our Philips Vision LEDs that provide 6000K bright white light, giving your car that added style with power and illumination with the latest LED lighting trend. Brighten up your vehicle interior lighting and go from yellow to white light with Philips Vision LED.

Exterior lighting: Fast response time

Unlike a standard incandescent bulb that actually takes time to light up, Vision LED lights illuminate instantly with an intense red light for stop/tail lights. That means when you brake, the vehicle behind you can react immediately. The instant-on capability of the Vision LED lights can actually reduce braking distance by up to 20 feet at 75 mph.

For back-up lighting, the brilliant 6000K bright white light immediately stands out and is perfect for cars with back-up cameras, by illuminating the view behind you.

Street-legal LEDs

First to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs. They are street-legal because their ground-breaking design allows the light beam to be focused exactly where it's needed, on the road.

Philips Vision LED: FAQ

Its groundbreaking design is what makes Vision LED stand out. Light output of an LED bulb is not necessarily related to the number of LEDs mounted on the bulb, but it is all about filament position. By mounting the LEDs in filament position, we get the maximum light output on where it needs to be, on the road. This filament position allows us to meet the light output of an incandescent bulb, thus make them street-legal. In addition, due to its design, the LEDs are extremely robust and shock- and moisture proof and capable of handling voltage surges without failure.

My LED doesn't light up after installation. Why does this happen and how can I solve this?

If your LED doesn't light up, its likely that you need to flip the LED.

Why does this happen?

Regular incandescent bulbs can draw current in either direction, there are no 'positive' or 'negative' sides on the bulb. The bulb will work regardless of which direction it is inserted. LED bulbs, however, only draw current in one direction. Basically, this situation can be compared to batteries that have a positive and negative side. So if the LEDs are inserted incorrectly, they will not work. The solution is to simply flip the LED!

Follow these steps to reverse the polarity:

1. Remove the LED from the socket.

2. Flip the LED.

3. Insert LED back into the socket.

4. Check to ensure the LED lights up.

After installation: I notice fast flash or dashboard errors about a failing bulb. What should I do?

Error messages appear because the LED bulb wattage is much lower than conventional bulbs, which can make an outage warning system unable to detect the bulb.

If your car has a dashboard error message, experiences fast flash or goes in limp mode upon installation of an LED bulb, you may consider to purchase and install a Philips Vision LED CAN-bus warning canceller solution.

The 5W CAN-bus is used for interior applications, and license plate lighting. The 21W CAN-bus is used for exterior applications.

A breakthrough innovation for your vehicle lighting

Replace your standard car lights with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out.

The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, and license plate lights. All backed by our 12-year limited warranty. Please visit our website for more information on the warranty program.

Interior lighting: 6000K Bright white light

Upgrade your style with the latest technology. Light up your vehicle interior with our Philips Vision LEDs that provide 6000K bright white light, giving your car that added style with power and illumination with the latest LED lighting trend. Brighten up your vehicle interior lighting and go from yellow to white light with Philips Vision LED.

Exterior lighting: Fast response time

Unlike a standard incandescent bulb that actually takes time to light up, Vision LED lights illuminate instantly with an intense red light for stop/tail lights. That means when you brake, the vehicle behind you can react immediately. The instant-on capability of the Vision LED lights can actually reduce braking distance by up to 20 feet at 75 mph.

For back-up lighting, the brilliant 6000K bright white light immediately stands out and is perfect for cars with back-up cameras, by illuminating the view behind you.

Street-legal LEDs

First to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs. They are street-legal because their ground-breaking design allows the light beam to be focused exactly where it's needed, on the road.

Philips Vision LED: FAQ

Its groundbreaking design is what makes Vision LED stand out. Light output of an LED bulb is not necessarily related to the number of LEDs mounted on the bulb, but it is all about filament position. By mounting the LEDs in filament position, we get the maximum light output on where it needs to be, on the road. This filament position allows us to meet the light output of an incandescent bulb, thus make them street-legal. In addition, due to its design, the LEDs are extremely robust and shock- and moisture proof and capable of handling voltage surges without failure.

My LED doesn't light up after installation. Why does this happen and how can I solve this?

If your LED doesn't light up, its likely that you need to flip the LED.

Why does this happen?

Regular incandescent bulbs can draw current in either direction, there are no 'positive' or 'negative' sides on the bulb. The bulb will work regardless of which direction it is inserted. LED bulbs, however, only draw current in one direction. Basically, this situation can be compared to batteries that have a positive and negative side. So if the LEDs are inserted incorrectly, they will not work. The solution is to simply flip the LED!

Follow these steps to reverse the polarity:

1. Remove the LED from the socket.

2. Flip the LED.

3. Insert LED back into the socket.

4. Check to ensure the LED lights up.

After installation: I notice fast flash or dashboard errors about a failing bulb. What should I do?

Error messages appear because the LED bulb wattage is much lower than conventional bulbs, which can make an outage warning system unable to detect the bulb.

If your car has a dashboard error message, experiences fast flash or goes in limp mode upon installation of an LED bulb, you may consider to purchase and install a Philips Vision LED CAN-bus warning canceller solution.

The 5W CAN-bus is used for interior applications, and license plate lighting. The 21W CAN-bus is used for exterior applications.

Product description

Philips Ultinon LED exterior signaling lights let you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights.

• Get stylish signaling with an intense red light
• Whether it’s for backup, stopping, or signaling, Philips Ultinon LED exterior lighting is designed to provide excellent light distribution.
• Philips Ultinon LED lights are direct replacements for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications.
• Up to 8 year lifetime
• With Philips Ultinon LEDs, your lighting will be on the cutting edge now, and for years to come.

Product features

Ultinon LED lighting

If you are looking to upgrade your style without buying a new car, replacing your interior and exterior lighting with Philips Ultinon LEDs is a smart way to spend your money. Philips Ultinon LED lights are a direct replacement for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications. Whether it’s for backup, stopping, or signaling, Philips Ultinon exterior lighting is designed to provide excellent light distribution. The light is projected where you need it so not only can you see more inside your car, you can see more on the road. Make a statement and get noticed with Philips LEDs.

Get bright signaling and stylish driving with Philips Ultinon LEDs

Interior lighting:

Make a style statement with Philips Ultinon interior LED lights. Philips LED lights offer a choice of cool blue or the high-tech 6000K bright white light for a more stylish interior. Whether it’s for your phone, your keys, or some spare change, we all have had to search for misplaced items in a dark car. With Philips LED interior lighting, you get a bright, uniformly diffused light. SO the next time you’re searching around in the trunk, the glove compartment, or on the floor of your car, you’ll be able to see better to find that missing item faster.

Exterior lighting:

Philips Ultinon LED exterior signaling lights lets you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights. Signaling your attention to other drivers is vital to your safety. The instant-on feature ensures that you’re seen for improved safety.

Durable, long-lasting LED lighting

You want bright, stylish lighting for your car but you don’t want to keep replacing burned out bulbs. Philips Ultinon LED lights give you high-powered, automotive grade LEDs, with a lifetime up to 8 years. With conventional bulbs, the more powerful the light, the shorter its lifespan. Philips Ultinon LEDs deliver bright even light, yet have excellent resistance to heat and vibration. This makes them the perfect choice for a long-lasting performance.

Seeing a fast flash error? The Philips Ultinon CANbus Adapter can help

Philips Ultinon LEDs use significantly less power than incandescent bulbs. Because of their energy-saving performance, Philips Ultinon LEDs can cause a dashboard error message or fast flash error. After installation of LED bulbs, some cars may go into ‘limp home’ mode. The car’s computer is looking for resistor value of the incandescent bulb, but the LED has a different resistor value than the incandescent bulb. The difference in resistor values can cause the car to go into ‘limp home’ mode, and you could receive a message that the car has a problem. Thankfully this happens rarely and the issue can be resolved. First, verify that the limp mode is being caused by the LEDs by replacing them with the incandescent bulbs. If the ‘limp home’ mode clears, it was most likely caused by the LED bulbs. This means that you’ll want to install a Philips LED CANbus enabling adapter to provide the resistor value that the vehicle computer expects to see. Installation takes only minutes and requires only a pair of pliers.

Two type of CANbus adapters for exterior and interior applications

We offer two types of CANbus enabling adapters for exterior and interior applications. The 5W CANbus is used for interior applications and license plate lighting. The 21W CANbus enabling adapter is used for exterior applications.

Reverse the polarity and flip the bulb if it doesn’t light up

Philips Ultinon LEDs are a direct replacement for conventional bulbs. Just follow the instructions on the package for easy installation. If your LED doesn’t light up, it’s likely that you need to “reverse the polarity” by flipping the LED bulb. LEDs work like batteries with a positive and negative polarity. If the LED does not light up, simply remove the LED, flip the direction and reinstall.

Since LED bulbs only draw current in one direction, the bulbs will not work unless inserted a certain way. So if the LEDs are inserted incorrectly, simply flip the LED and you’re all set to see and be seen.

Philips Automotive: Leading-edge lighting technology since 1914

From high performance lighting that improves driver safety, to lighting designed to enhance the style of your ride, Philips offers automotive lighting choices that help you to make the most out of your driving experience.

All Philips Automotive Lighting products incorporate the leading edge lighting technology and original equipment quality that have made us one of the first choice of car manufacturers around the world.

Original equipment quality seal for the most reliable performance

Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.

Don't compromise on safety, change in pairs

At the end of their life, lamps project less light, thereby reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. In addition, it's simply more efficient to change both headlight bulbs while your car is in for service, rather than only replace the failed one.

New, modern bulbs have increased light output and increased performance, offering a safer driving experience. And remember, two new headlights are safer than one.

Safety you can see

Our products are designed to increase driver safety. Because we understand that safer driving is driving that offers you a clearer view of the road. And when you see more, you have more time to react to hazards.

Safer vehicles with improved lighting really do make a difference. That's safety you can see.

Product description

Philips Ultinon LED exterior signaling lights let you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights.

• get a more stylish and high-tech look with 6000k bright white light.
• whether it’s for backup, stopping, or signaling, philips ultinon led exterior lighting is designed to provide excellent light distribution.
• philips ultinon led lights are direct replacements for conventional bulbs. they’re easy to install and available for a wide range of interior and exterior applications.
• up to 8 year lifetime
• with philips ultinon leds, your lighting will be on the cutting edge now, and for years to come.
• Fit type: Vehicle Specific Fit

Product features

Ultinon LED lighting

If you are looking to upgrade your style without buying a new car, replacing your interior and exterior lighting with Philips Ultinon LEDs is a smart way to spend your money. Philips Ultinon LED lights are a direct replacement for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications. Whether it’s for backup, stopping, or signaling, Philips Ultinon exterior lighting is designed to provide excellent light distribution. The light is projected where you need it so not only can you see more inside your car, you can see more on the road. Make a statement and get noticed with Philips LEDs.

Get bright signaling and stylish driving with Philips Ultinon LEDs

Interior lighting:

Make a style statement with Philips Ultinon interior LED lights. Philips LED lights offer a choice of cool blue or the high-tech 6000K bright white light for a more stylish interior. Whether it’s for your phone, your keys, or some spare change, we all have had to search for misplaced items in a dark car. With Philips LED interior lighting, you get a bright, uniformly diffused light. SO the next time you’re searching around in the trunk, the glove compartment, or on the floor of your car, you’ll be able to see better to find that missing item faster.

Exterior lighting:

Philips Ultinon LED exterior signaling lights lets you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights. Signaling your attention to other drivers is vital to your safety. The instant-on feature ensures that you’re seen for improved safety.

Durable, long-lasting LED lighting

You want bright, stylish lighting for your car but you don’t want to keep replacing burned out bulbs. Philips Ultinon LED lights give you high-powered, automotive grade LEDs, with a lifetime up to 8 years. With conventional bulbs, the more powerful the light, the shorter its lifespan. Philips Ultinon LEDs deliver bright even light, yet have excellent resistance to heat and vibration. This makes them the perfect choice for a long-lasting performance.

Seeing a fast flash error? The Philips Ultinon CANbus Adapter can help

Philips Ultinon LEDs use significantly less power than incandescent bulbs. Because of their energy-saving performance, Philips Ultinon LEDs can cause a dashboard error message or fast flash error. After installation of LED bulbs, some cars may go into ‘limp home’ mode. The car’s computer is looking for resistor value of the incandescent bulb, but the LED has a different resistor value than the incandescent bulb. The difference in resistor values can cause the car to go into ‘limp home’ mode, and you could receive a message that the car has a problem. Thankfully this happens rarely and the issue can be resolved. First, verify that the limp mode is being caused by the LEDs by replacing them with the incandescent bulbs. If the ‘limp home’ mode clears, it was most likely caused by the LED bulbs. This means that you’ll want to install a Philips LED CANbus enabling adapter to provide the resistor value that the vehicle computer expects to see. Installation takes only minutes and requires only a pair of pliers.

Two type of CANbus adapters for exterior and interior applications

We offer two types of CANbus enabling adapters for exterior and interior applications. The 5W CANbus is used for interior applications and license plate lighting. The 21W CANbus enabling adapter is used for exterior applications.

Reverse the polarity and flip the bulb if it doesn’t light up

Philips Ultinon LEDs are a direct replacement for conventional bulbs. Just follow the instructions on the package for easy installation. If your LED doesn’t light up, it’s likely that you need to “reverse the polarity” by flipping the LED bulb. LEDs work like batteries with a positive and negative polarity. If the LED does not light up, simply remove the LED, flip the direction and reinstall.

Since LED bulbs only draw current in one direction, the bulbs will not work unless inserted a certain way. So if the LEDs are inserted incorrectly, simply flip the LED and you’re all set to see and be seen.

Philips Automotive: Leading-edge lighting technology since 1914

From high performance lighting that improves driver safety, to lighting designed to enhance the style of your ride, Philips offers automotive lighting choices that help you to make the most out of your driving experience.

All Philips Automotive Lighting products incorporate the leading edge lighting technology and original equipment quality that have made us one of the first choice of car manufacturers around the world.

Original equipment quality seal for the most reliable performance

Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.

Don't compromise on safety, change in pairs

At the end of their life, lamps project less light, thereby reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. In addition, it's simply more efficient to change both headlight bulbs while your car is in for service, rather than only replace the failed one.

New, modern bulbs have increased light output and increased performance, offering a safer driving experience. And remember, two new headlights are safer than one.

Safety you can see

Our products are designed to increase driver safety. Because we understand that safer driving is driving that offers you a clearer view of the road. And when you see more, you have more time to react to hazards.

Safer vehicles with improved lighting really do make a difference. That's safety you can see.

Product description

Philips Ultinon LED exterior signaling lights let you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights.

• Get a more stylish and high-tech look with 6000K bright white light.
• Whether it’s for backup, stopping, or signaling, Philips Ultinon LED exterior lighting is designed to provide excellent light distribution.
• Philips Ultinon LED lights are direct replacements for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications.
• Up to 8 year lifetime
• With Philips Ultinon LEDs, your lighting will be on the cutting edge now, and for years to come.

Product features

Ultinon LED lighting

If you are looking to upgrade your style without buying a new car, replacing your interior and exterior lighting with Philips Ultinon LEDs is a smart way to spend your money. Philips Ultinon LED lights are a direct replacement for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications. Whether it’s for backup, stopping, or signaling, Philips Ultinon exterior lighting is designed to provide excellent light distribution. The light is projected where you need it so not only can you see more inside your car, you can see more on the road. Make a statement and get noticed with Philips LEDs.

Get bright signaling and stylish driving with Philips Ultinon LEDs

Interior lighting:

Make a style statement with Philips Ultinon interior LED lights. Philips LED lights offer a choice of cool blue or the high-tech 6000K bright white light for a more stylish interior. Whether it’s for your phone, your keys, or some spare change, we all have had to search for misplaced items in a dark car. With Philips LED interior lighting, you get a bright, uniformly diffused light. SO the next time you’re searching around in the trunk, the glove compartment, or on the floor of your car, you’ll be able to see better to find that missing item faster.

Exterior lighting:

Philips Ultinon LED exterior signaling lights lets you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights. Signaling your attention to other drivers is vital to your safety. The instant-on feature ensures that you’re seen for improved safety.

Durable, long-lasting LED lighting

You want bright, stylish lighting for your car but you don’t want to keep replacing burned out bulbs. Philips Ultinon LED lights give you high-powered, automotive grade LEDs, with a lifetime up to 8 years. With conventional bulbs, the more powerful the light, the shorter its lifespan. Philips Ultinon LEDs deliver bright even light, yet have excellent resistance to heat and vibration. This makes them the perfect choice for a long-lasting performance.

Seeing a fast flash error? The Philips Ultinon CANbus Adapter can help

Philips Ultinon LEDs use significantly less power than incandescent bulbs. Because of their energy-saving performance, Philips Ultinon LEDs can cause a dashboard error message or fast flash error. After installation of LED bulbs, some cars may go into ‘limp home’ mode. The car’s computer is looking for resistor value of the incandescent bulb, but the LED has a different resistor value than the incandescent bulb. The difference in resistor values can cause the car to go into ‘limp home’ mode, and you could receive a message that the car has a problem. Thankfully this happens rarely and the issue can be resolved. First, verify that the limp mode is being caused by the LEDs by replacing them with the incandescent bulbs. If the ‘limp home’ mode clears, it was most likely caused by the LED bulbs. This means that you’ll want to install a Philips LED CANbus enabling adapter to provide the resistor value that the vehicle computer expects to see. Installation takes only minutes and requires only a pair of pliers.

Two type of CANbus adapters for exterior and interior applications

We offer two types of CANbus enabling adapters for exterior and interior applications. The 5W CANbus is used for interior applications and license plate lighting. The 21W CANbus enabling adapter is used for exterior applications.

Reverse the polarity and flip the bulb if it doesn’t light up

Philips Ultinon LEDs are a direct replacement for conventional bulbs. Just follow the instructions on the package for easy installation. If your LED doesn’t light up, it’s likely that you need to “reverse the polarity” by flipping the LED bulb. LEDs work like batteries with a positive and negative polarity. If the LED does not light up, simply remove the LED, flip the direction and reinstall.

Since LED bulbs only draw current in one direction, the bulbs will not work unless inserted a certain way. So if the LEDs are inserted incorrectly, simply flip the LED and you’re all set to see and be seen.

Philips Automotive: Leading-edge lighting technology since 1914

From high performance lighting that improves driver safety, to lighting designed to enhance the style of your ride, Philips offers automotive lighting choices that help you to make the most out of your driving experience.

All Philips Automotive Lighting products incorporate the leading edge lighting technology and original equipment quality that have made us one of the first choice of car manufacturers around the world.

Original equipment quality seal for the most reliable performance

Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.

Don't compromise on safety, change in pairs

At the end of their life, lamps project less light, thereby reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. In addition, it's simply more efficient to change both headlight bulbs while your car is in for service, rather than only replace the failed one.

New, modern bulbs have increased light output and increased performance, offering a safer driving experience. And remember, two new headlights are safer than one.

Safety you can see

Our products are designed to increase driver safety. Because we understand that safer driving is driving that offers you a clearer view of the road. And when you see more, you have more time to react to hazards.

Safer vehicles with improved lighting really do make a difference. That's safety you can see.

Product description

A breakthrough innovation for your vehicle lighting: replace your light with our robust Philips vision LEDs that deliver dynamic lighting for your vehicle, both inside and out. And thanks to our 12+ years lifetime, you will likely never have to replace them again. The innovative design and Unmatched performance of Philips vision LEDs are available for brake and taillights, back-up Lights, dome Lights, glove box Lights, and license plate Lights. All backed by our 12-year limited warranty.

• Add style to your ride with Philips vision led
• Vision led lights last 12 years, guaranteed. With vision led, your lighting will be on the cutting edge now, and for years to come
• Interior lighting: 6000K bright white light. Exterior lighting: fast response time thanks to instant-on capability. Red intense light for stop/tail and 6000K white light for back-up applications
• First to market with proven street-legal exterior leds as a direct replacement for exterior incandescent bulbs
• Philips vision leds are available for brake and taillights, back-up lights, dome lights, glove compartment lights, trunk lights, and license plate lights

User questions & answers

Question:	does it fit gti
Answer:	It can sit flush, it's very stable, it has the lip above the screen.
Question:	Would these work in replacing 921 bulbs inside my RV
Answer:	Yes, it works fine even if you add a camera screen protector.
Question:	Can I use for dome light in 2016 Jeep Wrangler
Answer:	This particular case is soft but material more towards plastic.
Question:	Will this fir a 2004 silverado, for a backup light
Answer:	yes, the item you have chosen fits for iPhone 12 Mini well, you could ignore the hole of the image.
Question:	my car takes 2057 will these work and whats better red or white for a car with red lens
Answer:	I have iPhone 11 and it fits
Question:	Will these work in place of stock brake lights on a '13 Kia Rio? As in light up with headlights and then get brighter when you hit the brakes
Answer:	I have iPhone 11 and it fits perfectly.
Question:	Would these fit in an 03 w220 (s55amg) i have looked everywhere and cant find the correct bulbs
Answer:	I have a lilac purple iPhone and mine looks like a gray frosty color. Maybe yours might look a bit darker since it’s black.
Question:	I'm looking for brighter braking tail light to replace my oem standard bulb, on my kawasaki ninja 300 motorcycle, will this work ? thanks
Answer:	Yes

Product features

A breakthrough innovation for your vehicle lighting

Replace your standard car lights with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out.

The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, and license plate lights. All backed by our 12-year limited warranty. Please visit our website for more information on the warranty program.

Interior lighting: 6000K Bright white light

Upgrade your style with the latest technology. Light up your vehicle interior with our Philips Vision LEDs that provide 6000K bright white light, giving your car that added style with power and illumination with the latest LED lighting trend. Brighten up your vehicle interior lighting and go from yellow to white light with Philips Vision LED.

Exterior lighting: Fast response time

Unlike a standard incandescent bulb that actually takes time to light up, Vision LED lights illuminate instantly with an intense red light for stop/tail lights. That means when you brake, the vehicle behind you can react immediately. The instant-on capability of the Vision LED lights can actually reduce braking distance by up to 20 feet at 75 mph.

For back-up lighting, the brilliant 6000K bright white light immediately stands out and is perfect for cars with back-up cameras, by illuminating the view behind you.

Street-legal LEDs

First to market with proven street-legal exterior LEDs as a direct replacement for exterior incandescent bulbs. They are street-legal because their ground-breaking design allows the light beam to be focused exactly where it's needed, on the road.

Philips Vision LED: FAQ

Its groundbreaking design is what makes Vision LED stand out. Light output of an LED bulb is not necessarily related to the number of LEDs mounted on the bulb, but it is all about filament position. By mounting the LEDs in filament position, we get the maximum light output on where it needs to be, on the road. This filament position allows us to meet the light output of an incandescent bulb, thus make them street-legal. In addition, due to its design, the LEDs are extremely robust and shock- and moisture proof and capable of handling voltage surges without failure.

My LED doesn't light up after installation. Why does this happen and how can I solve this?

If your LED doesn't light up, its likely that you need to flip the LED.

Why does this happen?

Regular incandescent bulbs can draw current in either direction, there are no 'positive' or 'negative' sides on the bulb. The bulb will work regardless of which direction it is inserted. LED bulbs, however, only draw current in one direction. Basically, this situation can be compared to batteries that have a positive and negative side. So if the LEDs are inserted incorrectly, they will not work. The solution is to simply flip the LED!

Follow these steps to reverse the polarity:

1. Remove the LED from the socket.

2. Flip the LED.

3. Insert LED back into the socket.

4. Check to ensure the LED lights up.

After installation: I notice fast flash or dashboard errors about a failing bulb. What should I do?

Error messages appear because the LED bulb wattage is much lower than conventional bulbs, which can make an outage warning system unable to detect the bulb.

If your car has a dashboard error message, experiences fast flash or goes in limp mode upon installation of an LED bulb, you may consider to purchase and install a Philips Vision LED CAN-bus warning canceller solution.

The 5W CAN-bus is used for interior applications, and license plate lighting. The 21W CAN-bus is used for exterior applications.

Product description

This part fits:

	(fits years)	Model
	(2008-2011)	9-3 Sedan
	(2008-2011)	9-3 Conv

• Bulb (12V - 21W) (Red) Taillight, and Rear Fog Light (set of 2)

User questions & answers

Question:	Does this bulb have one contact or two on its underside? Can you provide a picture from that angle
Answer:	no
Question:	I need to replace Phillips 12496 amber bulbs with red. Will these work
Answer:	They want a contract with you paying them every month. Get an unlocked phone, go to Best Buy and get the cheapest sim card. That's the best deal, add What's App and you can call anywhere in the world for free.
Question:	is this a 1156 bulb
Answer:	would not work.
Question:	you did not list the voltage or wattage of bulb. did not list bulb part number. i need a philips 12088pr bulb
Answer:	yes- A little thinner than the one I am using, but I am sure it protects fine.

Product description

Philips Ultinon LED exterior signaling lights let you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights.

• Get stylish signaling with an intense red light
• Whether it’s for backup, stopping, or signaling, Philips Ultinon LED exterior lighting is designed to provide excellent light distribution.
• Philips Ultinon LED lights are direct replacements for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications.
• Up to 8 year lifetime
• With Philips Ultinon LEDs, your lighting will be on the cutting edge now, and for years to come.

User questions & answers

Question:	Will i need anything else for a 2014 civic sedan (9th gen) or will this cause hyler flashing? Im lookong to get this for my feont and read turn signal
Answer:	It can; I prefer the top but forms nicely to my bottom teeth well; cool thing is it’s remoldable so I was able to try both upper and lower
Question:	It will work to replace a toshiba 7443 t20 12v 21/5w on a peugeot 208 allure
Answer:	I have crowns and did not have a problem with them
Question:	Does this fit mazda cx
Answer:	You actually are placing the guard on your teeth to mold so I think this would work for any size mouth.
Question:	It will work to replace a toshiba 7443 t20 12v 21/5w on a peugeot 208 allure
Answer:	I would think your good till you want something different. It doesn't seem like a product that would wear out. Just clean it and you shouldn't have any issues.

Product features

Ultinon LED lighting

If you are looking to upgrade your style without buying a new car, replacing your interior and exterior lighting with Philips Ultinon LEDs is a smart way to spend your money. Philips Ultinon LED lights are a direct replacement for conventional bulbs. They’re easy to install and available for a wide range of interior and exterior applications. Whether it’s for backup, stopping, or signaling, Philips Ultinon exterior lighting is designed to provide excellent light distribution. The light is projected where you need it so not only can you see more inside your car, you can see more on the road. Make a statement and get noticed with Philips LEDs.

Get bright signaling and stylish driving with Philips Ultinon LEDs

Interior lighting:

Make a style statement with Philips Ultinon interior LED lights. Philips LED lights offer a choice of cool blue or the high-tech 6000K bright white light for a more stylish interior. Whether it’s for your phone, your keys, or some spare change, we all have had to search for misplaced items in a dark car. With Philips LED interior lighting, you get a bright, uniformly diffused light. SO the next time you’re searching around in the trunk, the glove compartment, or on the floor of your car, you’ll be able to see better to find that missing item faster.

Exterior lighting:

Philips Ultinon LED exterior signaling lights lets you add performance and style to your ride. Upgrade your exterior lighting with a more intense red for stop lights, a more vibrant amber for turn signals, and brighter white light for backup and position lights. Signaling your attention to other drivers is vital to your safety. The instant-on feature ensures that you’re seen for improved safety.

Durable, long-lasting LED lighting

You want bright, stylish lighting for your car but you don’t want to keep replacing burned out bulbs. Philips Ultinon LED lights give you high-powered, automotive grade LEDs, with a lifetime up to 8 years. With conventional bulbs, the more powerful the light, the shorter its lifespan. Philips Ultinon LEDs deliver bright even light, yet have excellent resistance to heat and vibration. This makes them the perfect choice for a long-lasting performance.

Seeing a fast flash error? The Philips Ultinon CANbus Adapter can help

Philips Ultinon LEDs use significantly less power than incandescent bulbs. Because of their energy-saving performance, Philips Ultinon LEDs can cause a dashboard error message or fast flash error. After installation of LED bulbs, some cars may go into ‘limp home’ mode. The car’s computer is looking for resistor value of the incandescent bulb, but the LED has a different resistor value than the incandescent bulb. The difference in resistor values can cause the car to go into ‘limp home’ mode, and you could receive a message that the car has a problem. Thankfully this happens rarely and the issue can be resolved. First, verify that the limp mode is being caused by the LEDs by replacing them with the incandescent bulbs. If the ‘limp home’ mode clears, it was most likely caused by the LED bulbs. This means that you’ll want to install a Philips LED CANbus enabling adapter to provide the resistor value that the vehicle computer expects to see. Installation takes only minutes and requires only a pair of pliers.

Two type of CANbus adapters for exterior and interior applications

We offer two types of CANbus enabling adapters for exterior and interior applications. The 5W CANbus is used for interior applications and license plate lighting. The 21W CANbus enabling adapter is used for exterior applications.

Reverse the polarity and flip the bulb if it doesn’t light up

Philips Ultinon LEDs are a direct replacement for conventional bulbs. Just follow the instructions on the package for easy installation. If your LED doesn’t light up, it’s likely that you need to “reverse the polarity” by flipping the LED bulb. LEDs work like batteries with a positive and negative polarity. If the LED does not light up, simply remove the LED, flip the direction and reinstall.

Since LED bulbs only draw current in one direction, the bulbs will not work unless inserted a certain way. So if the LEDs are inserted incorrectly, simply flip the LED and you’re all set to see and be seen.

Philips Automotive: Leading-edge lighting technology since 1914

From high performance lighting that improves driver safety, to lighting designed to enhance the style of your ride, Philips offers automotive lighting choices that help you to make the most out of your driving experience.

All Philips Automotive Lighting products incorporate the leading edge lighting technology and original equipment quality that have made us one of the first choice of car manufacturers around the world.

Original equipment quality seal for the most reliable performance

Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.

Don't compromise on safety, change in pairs

At the end of their life, lamps project less light, thereby reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. In addition, it's simply more efficient to change both headlight bulbs while your car is in for service, rather than only replace the failed one.

New, modern bulbs have increased light output and increased performance, offering a safer driving experience. And remember, two new headlights are safer than one.

Safety you can see

Our products are designed to increase driver safety. Because we understand that safer driving is driving that offers you a clearer view of the road. And when you see more, you have more time to react to hazards.

Safer vehicles with improved lighting really do make a difference. That's safety you can see.