12 best mictuning led bars

• MULTIFUNCTIONAL - Features full functions of brake, sequential turn signal, running, reverse and strobe light. The Triple-row tailgate light emits Low Red for running, Bright Red for braking, Amber for left/right turning signals, White for reversing, and Flash Amber for emergency strobe light Let everyone behind you clearly knows what you will do next and avoid traffic accident. The sequential amber turn signals is definitely eye catching and enhace you car look.
• SUPER BRIGHT - Triple row LED tailgate light bar with premium 2835SMD led chips gives out super bright beam, adds a clear visibility to the rear drivers and keep distance with your car to reduce accidents
• HIGH PERFORMANCE - Adopt fully sealed silicone housing with IP68 waterproof rate, ensures light bar shines whatever in rainy or snowy days. Heavy-duty aluminum frame with strong construction and fast heat dissipation
• QUICK INSTALLATION - Coming with a 4-Way Flat Connector Wire. Truly plug-and-play with 4-way flat plug, and self-adhesive tape can be easily stuck on any smooth surface. Please pay attention to every wire's function and correctly connect them to your car. IMPORTANT: Before mounting, please make sure you've tested to differentiate which one is left turn signal, which one is right. Otherwise, it might make the turn signal be in the opposite place.
• UNIVERSAL FITMENT - This Aluminum Frame light strip operated at DC 12V -16V wide voltage, perfect for most Pickup Trucks, Trailers, Cars, SUV, RV, VAN, etc (For some special vehicle when the lights do not work normally, pls use the 4-Way Flat Connector Wire that includes in the package to connect and the lights will work normally.)

Product features

Want to add LED tailgate lighting bars to enhance your truck's look?

If you want to stand out from all the other trucks on road, then this MICTUNING Tri-row LED light strip is a must-have for anyone who likes to be a little bit different.

This tailgate light bar owns 5 Functions of brake, sequential turn signal, running, reverse and strobe light.

Sequential turn signal lighting adopts updated flowing design, gradually extends like a strand of water flowing and brings new visual enjoy.

You can easily stick this tailgate light bar to your car by its back tape. Universally fit for trucks, pickups, vans, SUV, cars etc.

Compatible or Not Compatible with the following vehicles:

1. Suitable for American cars with turn signal and brake lights on the same line

2. Not suitable for car models with separate turn signal and braking

3. Not suitable for some European cars

4. If there is a warning when plugging into the trailer port, please connect the car light wiring follow the line sequence

Flat 4 Pin Connector wiring diagram for reference:

Brown Wire: Ground

White Wire: Running Light

Yellow Wire: Left Turn Signal & Brake Light

Green Wire: Right Turn Signal & Brake Light

Red Wire: Reverse Light

Yellow + Green: Strobe Light

Note:

1. Please read the instruction paper thoroughly before any operation and installation on the light strip. Professional installation is highly recommended. Pls read the listing carefully before you place order.

2. Before mounting, please make sure you've tested to differentiate which one is left turn signal, which one is right. Otherwise, it might make the turn signal be in the opposite place.

3. Please clean the area of the vehicle where you install it firstly, and then use the heater to make it more sticky. The light strip also comes with spare mounting screws & clip set to secure it.

4. For some special vehicle when the lights do not work normally, pls use the 4-Way Flat Connector Wire that includes in the package to connect and the lights will work normally.

Package Included:

1x Tri-row LED Tailgate Light

1x Free 4-Way Flat Connector Wire

1x Spare Mounting Screws & Clip Set

1x Instruction

Waterproof

LED tailgate light bar filled with silicone, making the waterproof rate up to International IP678 standard. No need to worry rainy days.

Super Bright

Adopting triple-row LED design, wake up everyone behind you and make your truck be seen even in thickest traffic day or night.

Quick Installation

Great conductive standard 4-pin flat plug and Self-Adhesive tape, can be easily stuck on any smooth surface. The splice bar allows for flexible mounting on tailgate.

Cold Resistant

It’s ready to take on rain, snow, or even -20°F extreme weather. You can always drive in any weather everyday in anywhere.

• **FULL FUNCTIONS - Features full functions of brake, turn signal, running, reverse and strobe light. The Triple-row tailgate light emits low Red for running, Bright Red for braking, Amber for left/right turning signals, White for reversing, and Flash Amber for emergency strobe light. Let everyone behind you clearly knows what's your next step!
• **BRIGHT LIGHTS - Triple row with 504pcs 2835SMD led chips gives out super bright beam. Adds a clear visibility to the rear drivers, better ensuring safety traffic on roads!
• **PREMIUM QUALITY - Adopts fully sealed silicone housing with IP67 waterproof rate, works good whatever in rainy or snowy days. With inline fuse for short circuit protection, heavy duty and super durable
• **QUICK INSTALLATION - Coming with a 4-Way Flat Connector Wire, no need to drill for installation. Well conductive standard 4-pin flat plug and self-adhesive tape, can be easily stuck on any smooth surface, simple installation without screws required.
• **UNIVERSAL FITMENT - This flexible light strip features 60 inches long, operated at DC 12V wide voltage, perfect for most Pickup Trucks, Trailers, Cars, SUV, RV, VAN, etc (For some special vehicle when the lights do not work normally, pls use the 4-Way Flat Connector Wire that includes in the package to connect and the lights will work normally.)

User questions & answers

Question:	Hello, how do I get a replacement unit under warranty? My current unit stopped working after just a few short months
Answer:	Good luck with that!! Mine stopped working after 11 months and sent an email..never heard from anyone.
Question:	Does this come in a smaller size
Answer:	No
Question:	Can this be cut down
Answer:	You could, but then it would no longer be water proof. You need it to be water proof so...
Question:	So is the turn signal solid amber or sequential? It states solid but in the video it’s sequential
Answer:	Sequential. It’s very bright, easy to install, and so far after 3 months works flawless. For the price can’t beat it.

Product features

How often do you see LED tailgate lighting bars on trucks?

If you want to stand out from all the other trucks on road, then this MICTUNING Tri-row LED light strip is a must-have add on for anyone who likes to be a little bit different.

This 60" 504pcs 2835SMD led chips triple LED tailgate lighting bar is universal fitted for most Pickup Trucks, Trailers, Cars, SUV, RV, VAN, etc. It allows you to mount them along the tailgate as left/right turn signal lights, brake light, reverse light, running light and emergency strobe light.

Flat 4 Pin Connector wiring diagram for reference:

Brown Wire: Ground

White Wire: Running Light

Yellow Wire: Left Turn Signal & Brake Light

Green Wire: Right Turn Signal & Brake Light

Red Wire: Reverse Light

Yellow + Green: Strobe Light

Package Included:

1 x Tri-row LED Tailgate Light

1 x 4-Way Flat Connector Wire

1 x Spare Mounting Screws Set

1 x Instruction

Note:

1, Please read the instruction paper thoroughly before any operation and installation on the light strip. Professional installation is highly recommended.

2, Please clean the area of the vehicle where you install it firstly, and then use the heater to make it more sticky. The light strip also comes with spare mounting screws set to secure it.

Premium LED Chips

Adopted total 504pcs high-intensity leds, it output a more stylish running, brake, turn signal, reverse and strobe light to your rear friends. Let them see you!

Strong Weatherproof

With IP67 waterproof rating and silicone tightly-sealed ends on the strip, it runs pretty well in harsh weather conditions and suits all offroad terrains.

Plug-N-Play

Come with standard 4-pin flat connector and an extra red positive wire, easy to hoop up to the truck existing connector and reverse light, plug & play.

4-Way Flat Connector Wire

Come with a 4-way flat connector wire. Easy to connect the corresponding wires in the car.

• Super Clear Visibility - Turn Night into Day! Adopted premium leds, it emits 6000K crystal white light that illuminates brighter and farther than straight lights. Let's Go Off-Road Right Now!
• Perfect Beam Pattern - Unique reflector cup covered on each led, far exceeding than those flat leds. It outputs perfect combo spot/flood beam pattern, covering a long distance irradiation and wider view, suitable for Off Road, ATV, SUV, UTV, etc
• Curved Design - More Snug to Your Car Radian! Molded according to real car arc gives your car more charming look you've always imagined! Also, it's convenient for clearly seeing every obstacle beside your car or ahead road
• Excellent Performance - Made of 10pcs cooling fins, faster Heat-Dissipation than those lights with only 8pcs! With IP67 Vacuum Waterproof test rating, diecast aluminum housing and heavy duty powder coat. It's rust & corrosion resistant for long lasting durability
• NEW Launched Program: We already guarantee basic 2-Yrs Warranty and 100% Satisfation Aftersale Services. FOR MORE, Join Us to Be MIC-ers, Extended to 3-Yrs Warranty (fit for orders since May 1st, 2017)

User questions & answers

Question:	will this work on a 2015 rzr 900s
Answer:	These will not fit a 2008
Question:	What is the length without the brackets
Answer:	No
Question:	Are you even an authorized mictuning dealer or are you selling knockoffs
Answer:	I’m sorry it will not. Only up to 2005 years
Question:	I'm putting this on my trackhoe Bobcat to work at night. Is this bar super bright
Answer:	yes, the lenses are glass and they are a perfect fit in my application...only small complaint is yellow tint is light

Product features

MICTUNING 32” 3B239C Curved LED Light Bar - 180W

Designed with a perfect radian to fit your car snugly, the 32-inch curved led light bar outputs 6000k crystal white light of spot & flood combo beam, operated at DC 10-30V, suitable for most 4x4, Offroad, Polaris, SUV, UTV, ATV, etc.

• Curved Design, Wider & Longer Irradiation Distance
• High-lumen Output, Super Clear Visibility
• 10pcs Cooling Fins, Faster Heat Dissipation
• IP67 Waterproof, Rust & Corrosion Resistant, Long Lasting

More Heat Sinks

Made of 10pcs aluminum heat sinks with heavy-duty powder coating, it effciently takes away most heat without fan-noises, better prolong its running lifespan for more than 30,000 hours.

Close-fitted Curved Design

The led light bar is molded according to real car arc, more snugly to most vehicle radian, providing a wider and longer fields of vision, easily and clearly seeing every obstacles on your driving paths.

Spot & Flood Combo Beam

Adopts 17mm depth of spot & flood reflector cup with arc lens on each led bulb, MICTUNING premium leds far exceed those flat cheaper ones, which outputs super bright white light that Turns Night Into Day.

Product description

MICTUNING Wiring Harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment.

This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures,it is universal fit for any 7" 10" 12" 20" 30" 40" light bars,espcially good for light bar within 180w.

For light bar above 180w,we recommend you choose our MICTUNING Heavy Duty(HD) wiring harness for better job.



Great Construction

Quality wiring material - UL approved.

illuminated on/off toggle switch - can easily turn on/off the lights.

Inline blade fuse & 40A relay - multiple safety protection.

Universal Fit - compatible with all automobiles,Boats and devices equipped with a 10-30v power source.



Quick & Easy Install

1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -;

2. Connect the white+;black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ;

3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch;

4. Turn on on/off button of switch to test the lights bar.



What you'll get:

1 Yr MICTUNING Warranty and lifetime Friendly Customer Service. Package included:1 x wiring harness full wiring kit,1 x Diagram.

• MICTUNING MIC-B1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install.
• Details Makes Perfect:adopt flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
• Great Construction:40A Power Relay and Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.
• 10FT Extendable Wiring Harness:up to 10ft of wiring that is plenty of length to put it where you want.
• CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.

User questions & answers

Question:	on/offswitch mounting after drilling hole for mounting can i install switch from front or are the terminals removeabe to mount from rear
Answer:	Yes
Question:	Do you sale switch plates (brackets) for this harness
Answer:	Not sure. We put them on a 2018 Subaru WRX.
Question:	Can I use a 20 amp switch with this wiring harness
Answer:	I have a 2018 wrx and they fit PERFECT, so if you have a year 2015 wrx or over know that the mud flaps are made for our car! These mud flaps fit perfect on mine,my wrx looks bad@$$ with them! Wish everyonr could see how they fit! Easy install too!
Question:	Would I be alright running 2, 126 watt light bars on this 30 amp fuse harness
Answer:	Hi, I am sorry to inform you but this would not fit your vehicle.

Product features

MICTUNING MIC-B1002 Wiring Harness - 2 Lead

Coming with toggle switch and up to 10ft wires simplifies the whole installation, which allows you to easily control the light fixtures. DC 10-30V wide operating volt range is suitable for most Off-road car, SUV, UTV, Boats, etc.

Toggle Switch

Made of IP65 waterproof rubber sealing, this On-Off switch is designed for easy control of LED lights/work lamps, which also illuminates charming red to decorate your love car.

Safeguard Relay

Adopted premium PVC and well-conductive copper materials, the 40A relay works well in safety protection and conversion circuit.

Inline Fuse

Quick responsive blade fuse, being as overload and short-circuit protector, effectively protects the whole circuit.

Satisfy Your Need

MICTUNING MIC-B1002 LED Light Bar wiring harness is wrapped by a thermoplastic jacket that insulates up to 105℃, able to bear up to 180-watt led light bar/work lights. Up to 10ft wire is a great design for flexible mounting from car head to tail, suitable for most off-roads, SUV, ATV, UTV and other marine boat with 10-30V power source.

• MICTUNING HD+ Wiring Harness Kit with 2-Leads - Ultra Heavy Duty 12-Gauge wires, suitable for offroad light bar, HID work lights, Spot lights, Fog lights and other auxiliary lamps, Your Expensive High-power LED Lights Deserved for Superior Quality Harness!
• Details Make Perfect - Pre-wired design of all spade connectors, convenient for Quick & Easy Installation, Plug-N-Play! The 10ft long wire is flexible enough for mounting anywhere you wanted, wrapped by a thermoplastic PVC jacket that insulates up to 105??, better protects against moisture and heat
• Waterproof On-off Switch - equipped with premium SPST switch, sealed with a rubber ring that works against dust, moisture and water jets, simple touch on and shines charming red, Easy control your led light bar on/off!
• Early Burnout Defense - the inline water-resistant Fuse and 60amp Relay efficiently protect the circuit against voltage spikes and burnouts, also come with 3 pieces of different amperes fuses, great for various LED light bar/work lights connection
• What You'll Get - 1x HD+ wiring harness with On/Off Waterproof Switch, 1x User Manual, 3x fuses and 4x spade connectors. Caution: Professional installation of this harness kit is highly recommended

User questions & answers

Question:	How do U mount the red round switch? Do you drill a certain size hole in dash? Does it snap in or screw in
Answer:	Yes it will work great. Me and 3 of my friends have this same light bar on our side by sides. For he money you cant go wrong
Question:	what gauge is the wire on this
Answer:	Bought this for my Subie loving' son-he's built throughworing out-got a large and it was right.
Question:	where can you get and what type of wiring harness can you get for a light bar with 1080 wattage
Answer:	I bought a medium and it is 26” from the shoulder seam to the hem.
Question:	Whats the difference in the 300 watt harness and the 600 watt harness? Both are 12 gauge wire, with 60 amp inline relay with the optional fuse size
Answer:	Yes

Product features

Inline Blade Fuse

The whole wiring harness with inline blade fuse that work as the first line of defense against over-current and short-circuit

Safeguard Relay

60A relay made of premium sturdy shell, operating at DC 12V voltage, can handle with high current applications, effectively protecting the circuit

Waterproof ON/OFF Switch

Made of IP65 waterproof rubber sealing, this waterproof on/off switch allows easy control of LED light bars, also shines charming red to decorate car inner space

Quick & Easy Install

1. Make a connection from the harness kit to the led light fixtures first (Red to Red, Black to Black).

2. Connect the waterproof On/Off switch according to the wiring diagram.

3. Then make a connection from the harness ring-terminals to the battery (Red to positive pole and Black to negative pole).

4. Turn on or off the On-off switch to test the LED light bars.

Cautions:

- Professional installation of this HD+ series wiring harness is highly recommended!

- All the exposed wires needed to be wrapped by electrical tape to avoid a short circuit.

- Please make sure that the total power of dual light fixtures is not exceed 300W, or it would get melt.

Package Included:

1x HD+ Wiring Harness with On/Off Waterproof Switch， 4x Male Connectors， 3x Spare Fuses， 1x User Manual

• MICTUNING Dual Purpose 2-Circuit Wiring Harness- NEW Style Wire Harness with 2 Toggle Switches, freely control one LED light bar with backlight or Separately control front and rear lights (both on/off, single on/off)
• Heavy Duty Wires - UL approval, 14AWG premium copper wire, bears max. 300 watts high power led lights, wrapped by thermoplastic insulated PVC jacket, heat resistant up to 105??.
• Reliable Defense - Inline a 60A relay and a blade fuse, being as the first line of defense to well protect the whole harness from Over-current and Short circuit
• All Weather Suitable - Come with red and blue waterproof switches and a close-fitted fuse holder, Dust-tight, Sand-proof, Moisture and Water jets Resistant
• Easy Installation - Operated at DC 12V, 10ft long wires for flexible mounting to your desired location. You'll Get 1 Yr MICTUNING Limited Warranty, lifetime technical support and friendly aftermarket service! Caution: Professional installation of this harness kit is highly recommended

User questions & answers

Question:	Can this harness be set up and used on two LED fixtures ?White and yellow lights. Need a way to turn on eather color. Lights are 3 wire
Answer:	2 x 126W = 21 Amps, so you're right on the edge there. The relay should be fine but the fuse could burn out every now and then.
Question:	Could I run 3 light bats off this
Answer:	It will work anywhere you have at least a 32" wide spot to mount. If your razor is a trail it might not be wide enough to mount it to the roll bar or roof. The wiring harness made the installation clean looking and fairly easy to install. I ran power from the ignition switch so the led light would only have power when the ign. key is on or the machine is running. All in all it is a great product for a great price and I would buy more of them.
Question:	Could I run two 20inch light bars off this harness? They each pull 6 amps
Answer:	Dear Brad, first of all, thank you for your attention and time! The light bar's length (end to end) is 32.3'' without brackets. Thank you! We love our customers! Good day and good luck!
Question:	Is the heat resistance 105 degrees Celsius or Fahrenheit
Answer:	I don't know if it's an authorized dealer or not but the light bar showed up on time and works amazing!

Product features

Inline Blade Fuse

The whole wiring harness with inline blade fuse that work as the first line of defense against over-current and short-circuit

Safeguard Relay

60A relay made of premium sturdy shell, operating at DC 12V voltage, can handle with high current applications, effectively protecting the circuit

DUAL Waterproof Switches

NEW Style Wire Harness with 2 Toggle Switches, freely control one LED light bar with backlight or Separately control front and rear lights (both on/off, single on/off)

• MICTUNING 03 Series wiring harness kit with 5 pin on/off rocker switch and easy to install.
• Details Makes Perfect:adopt flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
• Great Construction:40A Power Relay & Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.
• 10FT Extendable Wiring Harness:up to 10ft of wiring that is plenty of length to put it where you want.
• CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.

User questions & answers

Question:	I got a 2011 tacoma with an extra accessory switch panel. Do i need to buy the sleeve or does the switch go right in
Answer:	I can't remember what the difference is, but i remember looking into it. I got the 600 watt one, but can't remember why sorry.
Question:	Can this be wired to a 5 amp switch
Answer:	After you drill the hole the switch is design to push through from the back because of the expandable bracket that holds it in place
Question:	does this have two lines, I am going to run fog lights but do not want to splice the 4 wires into
Answer:	No you drill a hole in your dad's and push the switch into the hole. It holds ita self in there very well with some plastic flanges. I used a 3/4 hole saw bite and that works well but I had to cut out notches so it would fit properly. I'm too scared to try a 7/8 bite because it might be too big
Question:	Is everything pre wired for easier installation
Answer:	Yes you can. BUT, make sure your fuse is not larger than 20 amps. The fuse must blow before any of the other components are overloaded.

Product features

Quick & Easy Install

1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -;

2. Connect the white+;black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ;

3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch;

4. Turn on on/off button of switch to test the lights bar.

Great Construction

Quality wiring material - UL approved.

5 pin on/off rocker switch - can easily turn on/off the lights.

Inline blade fuse & 40A relay - multiple safety protection.

Universal Fit - compatible with all automobiles,Boats and devices equipped with a 10-30v power source.

Package included:

1 x wiring harness with 5pin rocker switch,1 x Diagram.

Inline Blade Fuse

The whole wiring harness with inline blade fuse that work as the first line of defense against over-current and short-circuit

Safeguard Relay

40A relay made of premium sturdy shell, operating at DC 12V voltage, can handle with high current applications, effectively protecting the circuit

5 Pin Rocker Switch

This LED illuminated 5 pin on/off rocker switch allows easy control of LED light bars, and all patterns are etched directly onto the switch surface to ensure long lasting durability

Product description

Wider Field of Vision and Fit Your Vehicle Snugly than Straight Light

Designed with a perfect radian to fit your vehicle snugly! Gives your vehicle the aggressive look you've always imagined! Covers a wider range of illumination than traditional straight light bars, great for your special rough road racing, jungle adventure, countryside driving and other wonderful journeys.



Turn Night into Day with Spot and Flood Combo Light

Combination of spot beam and flood beam, 10-32 DC operating voltage, the whole light perfectly co-works with reflector cups and lens, offering a long distance irradiation and wider view, suitable for 4x4, Off Road, Jeep, Polaris, Razor, ATV, SUV, UTV, car and Truck being as work light, DRL light or driving light etc.



Heavy Duty Construction for Waterproof and Rust-resistant

Made of diecast aluminum housing with heavy duty powder coat and clear PC lens with high transmittance and better heat cooling fins. Vacuum waterproof test rating at IP67. It is also shockproof, dustproof and corrosion resistant that endures foggy, rainy, dust-blowing days and other harsh weather conditions. More than 30,000 hours lifespan.

Assured Guarantee- Buy with Confidence

All MICTUNING LED light bars are supported by 24 Months Warranty and we sincerely offer the most effective solutions to buyers, even if it's your first purchase. And now we have launched a NEW Program "Join Us to Be MIC-ers, Get 3 Yrs Extended Warranty" for orders since May 1st, 2017. Please search MICTUNING for more details.

What you'll get

1 x 120W Curved Light Bar

2 x Mounting Brackets

1 x Set Mounting Screws



Let's Go Off-road NOW by Clicking “Add to Cart”.



Caution: Professional installation highly recommend and please use electrical insulation tape to cover all metal to avoid short circuit!

• Super Clear Visibility - Turn Night into Day! Adopted premium leds, it emits 6000K crystal white light that illuminates brighter and farther than straight lights. Let's Go Off-Road Right Now!
• Perfect Beam Pattern - Unique reflector cup covered on each led, far exceeding than those flat leds. It outputs perfect combo spot/flood beam pattern, covering a long distance irradiation and wider view, suitable for 4x4, Off Road, Jeep, Polaris, Razor, ATV, SUV, UTV, etc
• Curved Design - More Snug to Your Car Radian! Molded according to real car arc gives your car more charming look you've always imagined! Also, it's convenient for clearly seeing every obstacle beside your car or ahead road
• Excellent Performance - Made of 10pcs cooling fins, faster Heat-Dissipation than those lights with only 8pcs! With IP67 Vacuum Waterproof test rating, diecast aluminum housing and heavy duty powder coat. It's rust & corrosion resistant for long lasting durability
• NEW Launched Program: We already guarantee basic 2-Yrs Warranty and 100% Satisfation Aftersale Services. FOR MORE, Join Us to Be MIC-ers, Extended to 3-Yrs Warranty (fit for orders since May 1st, 2017)

User questions & answers

Question:	will this fit an accord 2000? I have a stock battery and zero expereince with light bars, is this DIY
Answer:	My guess would be Fahrenheit..but the rating of 105 seems like a misprint imo. Have had this harness for 3 years now with absolutely NO problems under the hood of a black truck. Even with 100 degree temps and engine heat there've been no issues. Just be smart in your routing not to come in contact with any engine components and be sure to use wire ties to keep it in place. This is a great harness and sneaking the switch into the cab via the firewall (there's always an opening somewhere near steering rod or brake pedal) is a breeze. This thing is well worth it's price and will save you a ton of time vs. Doing it from scratch.
Question:	is this fixture have clear installation instructions
Answer:	Drilled hole and snapped it in
Question:	Which wiring kit is recommended for the 22" curved combo
Answer:	12
Question:	Can it fit on my Bull Bar
Answer:	i would go onto the internet and get the better ones

Product features

MICTUNING 22” 3B139C Curved LED Light Bar - 120W

Designed with a perfect radian to fit your car snugly, the 22-inch curved led light bar outputs 6000k crystal white light of spot & flood combo beam, operated at DC 10-30V, suitable for most 4x4, Offroad, Polaris, SUV, UTV, ATV, etc.

More Heat Sinks

Made of 10pcs aluminum heat sinks with heavy-duty powder coating, it effciently takes away most heat without fan-noises, better prolong its running lifespan for more than 30,000 hours.

Close-fitted Curved Design

The led light bar is molded according to real car arc, more snugly to most vehicle radian, providing a wider and longer fields of vision, easily and clearly seeing every obstacles on your driving paths.

Spot & Flood Combo Beam

Adopts 17mm depth of spot & flood reflector cup with arc lens on each led bulb, MICTUNING premium leds far exceed those flat cheaper ones, which outputs super bright white light that Turns Night Into Day.

Keep Running

If you only want to install the perfect light bar kit without letting you down, MICTUNING is the Bright Choice, for Safe and Fun! Made of solid aluminum shell, premium leds and impact-resistant lens with high-lumen output, all of these are MICTUNING truly concerned, to ensure a brighter and over 30000hrs longtime running.

• Amazingly Bright - 24pcs*3w high intensity leds, combo spot and flood beam with up to 5000lm luminous flux, illuminating every inch of your road! ATTENTION: our packing is upgrading and it will be randomly sent
• Natural White - Output 6000-6200k crystal clear white light with Wider & Farther Irridation Distance, Much Safer than the poor penetrated bluish lights or dim halogen lamps
• Improved Sealing Design - Upgrade with tightly sealed Waterproof Rubber Pad, better shield from sand, dust, moisture and rain drops, ALL Weather Suitable!
• Visible Toughness - Adopt Military Diecast Alu housing, sturdy brackets and heavy-duty powder coating, with 10pcs premium cooling fins, 50% faster heat dissipation, great for most off road, SUV, UTV, ATV and other vehicles with DC 10-30V power source
• NEW Launched Program: We already guarantee basic 2-Yrs Warranty and 100% Satisfation Aftersale Services, FOR MORE, Join Us to Be MIC-ers, Extended to 3-Yrs Warranty (fit for orders since May 1st, 2017)

User questions & answers

Question:	Is it possible to wire this to a trailer plug? I want to mount it for an extra reverse light
Answer:	You can't pre-wire something like this. The lights have to be installed then the switch into the dash. Then the wires will plug in and route through the firewall of vehicle. If it was pre-wired you would have everything connected and the wires running through your window and that would be pretty dumb.
Question:	Does the spot and flood be switched separately
Answer:	Yes, If you order the 2 wire it will work on 2 separate LED light bars with 1 switch. You would need an additional Harness and switch to turn on either the yellow or white led portion of your led light. I wired it to 2 led light bars with 1 switch.
Question:	Hi Please very importantly I need to know if these lights are dimmbale. We are using them for project can we instal a dimming switch on them ? plea
Answer:	Need to provide a few more data points
Question:	Does this come with everything he will need to use this item
Answer:	Should be a problem at all

Product features

Premium LED

Output crystal clear white light, dispels the darkness and light up the forward road, clear view area for safety driving

Faster Heat dissipation

Premium cooling fin and Die-casting Alu housing fast heat-dissipation provide superior cooling effect, extending its service life

Improved Waterproof

IP67 waterproof rate with full sealed rubber pad , runs well in the rain, fog or other harsh weather

Simple Installation

All mounting hardware included, easily mounted on roof, front grill or bumper as long as the light length fitted

Off-Road Vehicles

The Led light Bar can be widely applied to UTV, sand rail, buggy, ATV, SUV, truck, train, motorbike, bus, tank etc

Engineering Vehicles

It is also suitable for excavator, road roller, bulldozer, crane, fork lift and mining truck etc

Specialized Vehicles

Can be installed on fire engine, police car, rescue vehicle, communication vehicle, military command vehicle etc

Other Application

You can also use the Led light bar for Garden, Backyard, Garage, boat, fishing, courtyard lamp, yacht, road/ street lamp, etc

• MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
• PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
• STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
• WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
• WHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram

User questions & answers

Question:	How does the rocker switch hold on ? Do i need the housing attchment or will it mount by its self thank you
Answer:	Matt, I have mine mounted on the front of my go rhino push bar. Should be able to mount to bull bar.
Question:	why wont the switch light up
Answer:	Switch has prongs on side fits standard cutout ,push on and it clips itself or some panels like mine had lay out out back to follow cutting out .hope this helps. Also bought one at advance auto less than14.00 bucks the switch accommodates two different sizes on hole cut out especially if room is limited. Hope this helps
Question:	Do you have a li k to get this in a 3 position switch? My light bar has 2 lighting options
Answer:	Yes
Question:	Wired switch up how instructions show. The backlights are lit up backwards. Am i missing something
Answer:	Yes, it does have a place to hook up 2 wires. However, they are kinda of close. I think it is designed to hook up 2 lights on the bumper where they are only a couple of feet apart. It is not a big deal, you can just make your pig tails to the light a little longer to meet your needs. I used on the windshild hinge mounted lights and just made my light pig tails about a foot long each and it worked great.

Product features

Fashion Cool Illuminated Rocker Switch

MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

Wide Application

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).

Sturdy Durability

Made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability

Jumper Wires Included

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends.

Easy Wiring and Universal Fit

The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

• Homelike Comfortable Light Source - adopted 72 pcs bright leds that outputs 500lm luminous flux of white light, it brings to you homelike cozy and comfortable lighting, allowing you to do interior detailed jobs easily at night
• Easy Switch Control - design with a Push On-Off Switch on one end of the light bar, allowing you to freely turn on or off the light at any time if needed, convenient for taking good care of your baby, kid or love pets at night trips
• Well Constructed - made of energy saving chip, aluminum alloy base and high-transmittance PC cover, with 3.5w low power consumption and 30,000h long lifespan, its wide lighting range offers enough brightness for paper reading, files watching, video talks, etc
• 2-Ways Surface Mounting - come with a double-sided adhesive tape for sticking on car interior smooth surface and two Snap-on brackets for bolts stable mounting (not included), you can easily finish installation within minutes
• Minimalist Stylish - Euro-style with simplicity appearance, not only for bright lighting, but decorates your love car, ideal for mounting on van, lorry, RV, caravan, motorhome, truck, trailer, boat and other DC 12-80V automotives

User questions & answers

Question:	The end of these light have a cigarette lighter thing that you stick into a 12v outlet
Answer:	No. It did not include electrical connectors as all my other lights did. It comes bare wire so it won't even easily connect to their own wiring harness.
Question:	how long can you leave them on before they would typically drain the battery
Answer:	Not sure while you want to put this on a Honda Accord but it hooks up the same as any other battery. Just depends on if you want to run this with the car running or off. Might make a difference in how you would run the wiring. And as far as fitting, that all depends on where you want to mount it and how you want to mount it and the width of your accord.
Question:	I bought two of them and one of them came damaged, it didn't worked didn't turn on the led lights, what should I do
Answer:	The directions for the wiring harness are there but I don't remember any instructions for the light bar install. But all you need to do is put a bolt through what ever you are securing it to and put a nut on the other end.
Question:	Are these able to be dimmed
Answer:	Any of the Mictuning kits will be fine. The 32" curved bar I got came with it. It has been almost a year and still working great. Good luck with yours.

Product features

Convenient switch control

Design with a Push On-Off Switch on one end of the light bar, allowing you to freely turn on or off the light at any time if needed, convenient for taking good care of your baby, kid or love pets at night trips

Easy install with 2 ways for your choice

Come with a double-sided adhesive tape for sticking on car interior smooth surface and two Snap-on brackets for bolts stable mounting (not included), you can easily finish installation within minutes

Comfortable Light Source

Outputs 500lm luminous flux of white light, it brings to you homelike cozy and comfortable lighting, allowing you to do interior detailed jobs easily at night

Product description

MICTUNING LED Light Bars - The Bright Choice, for Safe and Fun

MICTUNING is a leading LED lighting brand registered in US, providing cost-effective LED light bars and auto parts with 100% satisfaction aftersale service, and now we have launched a NEW Program "Join Us to Be MIC-ers, Get 3 Yrs Extended Warranty" for orders since May 1st, 2017. Please search MICTUNING for more details.



Features

SUPERIOR VISIBILITY - 60pcs high intensity leds of combo spot & flood beam with 6000-6200K crystal natural white light, standing out among other vehicles



EXCELLENT PERFORMANCE - 10pcs Cooling Fins, Faster Heat-Dissipation, Low Power Consumption and Long Lasting Durability



WATERPROOF & SHAKEPROOF - IP67 waterproof rate with full sealed rubber pad and reinforced lens, runs well in the rain, fog or other harsh weather



BREEZE INSTALL - All mounting hardware included, Simple Surface Mount on roof, front grill or bumper as long as the light length fitted



STRONG BACKUP - Always Be There for You!

Please feel free to contact us if you have any questions. Also, we're very appreciated that you share your new-found happy shopping experience to your family and friends through social media.



ATTENTION:

Some lights may not be packed in the printed box since our packing is being upgraded. BOTH OF THEM ARE CERTIFIED PRODUCTS AS LONG AS LABLED GENUINE MICTUNING TRADEMAR. What you'll get:

1 x 180W COMBO light bar 1 x Set Mounting bracket

• ★AMAZINGLY BRIGHT - MICTUNING 32 Inch Led Light Bar adopt 60pcs 3w high intensity leds, combo spot and flood beam with up to 13200lm luminous flux, illuminating every inch of your road! ATTENTION: our packing is upgrading and it will be randomly sent
• ★NATURAL WHITE- This light bar output 6000-6200k crystal clear white light with Wider & Farther Irridation Distance, Much Safer than the poor penetrated bluish lights or dim halogen lamps
• ★IMPROVED SEALING DESIGN - Upgrade with tightly sealed Waterproof Rubber Pad, better shield from sand, dust, moisture and rain drops, ALL Weather Suitable!
• ★VISIBLE TOUGHNESS - Adopt Military Diecast Alu housing, sturdy brackets and heavy-duty powder coating, with 10pcs premium cooling fins, 50% faster heat dissipation, great LED light bar for most off road lighting, SUV, UTV, ATV and other vehicles with DC 10-30V power source
• ★WHAT YOU'LL GET:1x 180W COMBO LED light bar, 1x Set Mounting bracket. NEW Launched Program: We already guarantee basic 2-Yrs Warranty and 100% Satisfation Aftersale Services, FOR MORE, Join Us to Be MIC-ers, Extended to 3-Yrs Warranty (fit for orders since May 1st, 2017)

User questions & answers

Question:	I am buying this as a gift to mount to the top of a 2015 rzr xp 1000, i was told a 30" light bar would work. Will this fit that vehicle
Answer:	The instructions are crap for these switches. I spent about two hours changing the wire placement to get mine correct. Try reversing the positive lead at the switch.
Question:	Will this fit on a Polaris Ranger 400 with roof
Answer:	U hook to a hot and a ground
Question:	When turning on the light bar does the flood and spot come on or is the switch a 3 position
Answer:	No.
Question:	One of my brackets was broken when i received, how do i get it replaced or do i have to buy one? if so where would i find one to purchase
Answer:	Yes you can, but it requires one designed for LED lights. I believe an LED dimmer does not drop the voltage like a rheostat does. I think it changes the cycle time length that the led is on to dim it. Check with the mfger/seller

Product features

MICTUNING MIC-BC2180 32” LED Light Bar - 180W

32-inch 180w spot & flood led light bar adopted 60pcs high intensity leds, it outputs 6000k crystal white light with excellent cooling performance and more than 30000hrs lifespan, perfect for all Offroad, 4x4, SUV, UTV, ATV and other vehicles with DC 10-30V power source.

Spot and Flood LEDS

MICTUNING 180w light bar combines spot and flood beam with deep reflector cup in a combo, focusing more light source for brighter and farther illumination.

Heavy-duty Powder Treatment

The entire surface of the light bar is treated by durable powder spraying that withstands strong lights and rain splashed. Its paint is not easy to be peeled off, which well works for long time period.

Excellent Heat Dissipation

Adopted 10pcs aluminum heat sinks, it efficiently takes away most heat, much faster than those lights only with 8pcs, which helps to enhance the light bar running lifespan beyond 30000 hours.

Let’s Go Off-road Now!

Equipped with a set of stainless steel mounting screws with rubber pads, MICTUNING 180w led light bar can be flexibly and stably mounted on your vehicle roof or bumper without flipping nor scratching, suitable for your off-road trip, jungle adventure, countryside racing and other ultimate challenges.