12 best remote start kits

• ✅ START YOUR TRUCK REMOTELY - Use the most complete Plug N Play Remote Starter KIT to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield. ✅✅✅ OPTIONAL CELL PHONE ADD ON – Start your vehicle from anywhere with an optional cell phone module add on. https://www.amazon.com/dp/B07H9FLDCD ✅✅✅
• ✅ COMPATIBILITY - F-150 15-19, F-250 17-19, F-350 17-19, F-450 17-19 Ranger 19, Expedition 18-19, Edge 15-19, Fusion 14-19. Compatible with both gas and diesel, key start and push to start. 🔴🔴 NOT COMPATIBLE WITH HYBRIDS.🔴🔴2020 Vehicles, please see amazon.com/dp/B08KHMGH3Z
• ✅ PLUG ‘N PLAY – No wires need to be cut or spliced. Please see the video in the listing. Instructions are included, or you may view our instruction video for super easy and fast installation. ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle with clicking LOCK UNLOCK LOCK on your factory remote. Press LOCK UNLOCK LOCK again and the professional grade Start-X Remote Starter will turn off your vehicle too.
• ✅ HOOD PIN REQUIRED - Your vehicle must have an OEM hood pin for the remote starter to work. Please ensure you have a hood pin before ordering.
• ✅NOTE: Climate control during remote start is set to automatic. You will not have direct control over the A/C Heat. The truck will cool and heat to 72 degrees.

User questions & answers

Question:	What does it mean when i press lock unlock lock and the horn just honks but doesnt start
Answer:	Watch utube videos on how to install it. It will make it much easier to understand
Question:	Does it shut off when you open the door, or continue to run
Answer:	It will only shut off if you push the brake pedal with no key in the ignition or if it runs for too long( I think 10 mins but I’m not sure.) Open doors are fine!
Question:	Will this work on a 2017 F250 6.7 diesel
Answer:	Yes, I installed it on my 2017 f250 6.7 in less than 15min on February 7th 2020.
Question:	Will this work for a 2019 f150 stx? thanks
Answer:	It will work for a 2019 f150 STX. I was impressed with the unit.

Product features

Using Your New System

Our neighbor-friendly device features a no-honk remote start. The module will activate by clicking lock-unlock-lock on your oem remote and will start your automatic transmission truck. An aftermarket remote is not necessary, so there are no extra key fobs to carry around. Climate control settings cannot be controlled with the remote start device, but will automatically resume last settings used or adjust to 72 degrees in hot/cold weather.

We’re Here To Help!

While the Start-X module is an ideal solution for anyone looking to enjoy effortless remote start, we know that not everyone is mechanically savvy. From questions to full step-by-step instructions, Start-X is here. Start-X provides easy to install remote starters to the professionals and hobbyists alike, but does not take responsibility for any damage done during or after installation. While we are happy to assist with step-by-step instructions, the installer is responsible for all aspects of installation.

• ✅ START YOUR TRUCK REMOTELY - Use the most complete Plug N Play Remote Starter KIT to warm or cool your truck, by pressing lock 3 times on your existing remote. 😊
• ✅ COMPATIBILITY – This kit is compatible with the RAM 1500/2500/3500 2013 2014 2015 2016 2017 Key Start. Will not work with Push to Start trucks.
• ✅ PLUG ‘N PLAY T-HARNESS – The included Start-X T-Harness eliminates all wire splicing and tapping.✅ ✅ Windows PC is required to complete the programming process.
• ✅PROGRAMMING, TECHNICAL SUPPORT – Programming the remote starter module requires a windows computer with Internet Explorer. Users, without computer technical know-how, will find the programming complicated. Please contact Start-X support for any difficulties you may encounter. 🔴🔴During peak season, Start-X will only provide support via email. 🔴🔴
• ✅ RANGE – The distance you can remote start from is the same distance you can lock/unlock your truck. You may want to test your remote to see if it’s enough for your remote start needs. Plug N Play long range remotes are available at an additional discounted cost.

User questions & answers

Question:	Will this work on 2013 2500 with the diesel
Answer:	Yes it does i installed mine 5 months ago. In the cold in lets the grid heater heat up before firing up.
Question:	do you guys have one for a 2013 ram 2500 6.7 standar transmission
Answer:	This should work
Question:	If I have the remote start button on my fob can it be used for this
Answer:	For this one you just hit the lock button 3 times and it starts.
Question:	Will this work for a 2014 2500 6.7 Cummins
Answer:	Only if it is turn key, and not push start.

Product features

Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included T-harness greatly simplifies installation. Completely Plug N Play.

ZERO WIRE TAPPING!

Using Your New System - 3X Lock

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket remote is not necessary, there are no extra key fobs to carry around.

Unique Start-X T-Harness

The included T-harness is a unique Start-X T-Harness that can not be found anywhere else. The T-harness is neat and avoids the the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.

• ✅ START YOUR TUNDRA REMOTELY - Use the most complete Plug N Play Remote Starter KIT for Tundra 2010-2017 G- Key to cool/warm up your vehicle. Get into your Tundra when its just the right temperature. Please make sure your key as a G on it.
• ✅ LOCK-LOCK-LOCK - With this kit, press LOCK LOCK LOCK on your factory remote to remote start. Please note, the range is limited to the range of your factory remote.
• ✅ PLUG ‘N PLAY T-Harness – The included T-Harness eliminates all wire cutting or splicing, however, there is some disassembly of your truck required. Instructions are included, or you may watch the installation video.
• ✅ ZERO WIRE SPLICING - There is zero wire cutting or splicing required. Completely plugs in to factory connectors.
• ✅ OPTIONAL CELL PHONE ADD ON – Start your vehicle from anywhere with an optional cell phone module add on. Amazon.com/dp/B07H9FLDCD

User questions & answers

Question:	My battery keeps dying since installed, battery tested good, what else can i check, other then removing remote start
Answer:	Got anything else running juice charger lights under wheel well light bar ?
Question:	When start, I don’t need to insert the key ? It will run keyless
Answer:	You still nee to insert the and no, it will not run keyless. The moment you press the brake without the key inserted, the engine will shut off.
Question:	How long it will gonna run if you turn on by accident
Answer:	Run time 10-15min... if you have a factory alarm, I have to push the lock button like 10-15 times to get it to start.. I’m expecting to replace my fob battery every winter and if you remote start it, then go to your truck to get something out and you want to lock the truck back up.. you can’t! It is literally a remote start with an unlock feature..
Question:	After install has anyone had issues with the horn not working or working intermittently
Answer:	none

Product features

Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included T-harness greatly simplifies installation.

Using Your New System - 3X Lock

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket emote is not necessary, there are no extra key fobs to carry around.

Unique Start-X T-Harness

The included T-harness is a unique Start-X T-Harness that can not be found anywhere else. The T-harness is neat and avoids the the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.

Product description

Complete Remote Starter Kit with T-Harness for F-150 11-14 ▓ F-250 11-16 ▓ F-350 11-16 ▓ F-450 11-16 ▓ F-550 11-16 ▓ Edge 11-14 ▓ Expedition 15–17 ▓ Explorer 11-15 ▓ Taurus 13-16 . Start your car with your factory remote by 3 x Lock. This kit includes a remote starter module programmed for your car and a wiring harness, to simplify installation.

• ✅ START YOUR VEHICLE REMOTELY - Use the most complete Plug N Play Remote Starter KIT for to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield.
• ✅ COMPATIBILITY - F-150 11-14|| F-250 11-16 || F-350 11-16 || F-450 11-16 || F-550 11-16 ||Edge 11-14 || Expedition 15–17 || Explorer 11-15 || Taurus 13-16 || Flex 11-16
• ✅ PLUG ‘N PLAY – Our unique T-harness eliminates all wire splicing. However, there is some disassembly of your truck required. Please see the video. Instructions are included, or you may view our instruction video for super easy and fast installation.
• ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle with clicking 3x lock on your factory remote. Press the lock 3x again and the professional grade Start-X Remote Starter will turn off your vehicle too.
• 🔴🔴 VEHICLE REQUIREMENTS 🔴🔴 – This kit will only work with a gas vehicle, automatic transmission, and key start. Will not work if the vehicle runs on diesel or has a manual transmission or is push to start. 🔴🔴WARNING: YOU MUST HAVE TWO KEYS, IN ORDER TO INSTALL THIS KIT. IF YOU DO NOT HAVE TWO KEYS, IT WILL NOT WORK, 🔴🔴

User questions & answers

Question:	can this wrok on lincon mkz
Answer:	This works well on a 2104 Ford Edge, not sure the differences in electronics if any.
Question:	Does your lights come on when using the remote starter
Answer:	Yes if it is on auto the headlights will if it is dark outside.
Question:	will this work on a 2012 E
Answer:	check the manual there it says the years and models to install them
Question:	Does this unit blow the horn at all when activated
Answer:	When remote starting your car you'll tap the lock button 2 times. The horn will alternately blow 2 times and then the car will start.

Product description

Start-X Remote Starter for Silverado & Sierra 1500/2500/3500 2015 2016 2017 2018 2019 2020

• ✅ START YOUR VEHICLE REMOTELY- Use the most complete Plug N Play Remote Starter KIT to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield. 😊
• ✅ 5 MINUTE INSTALL – This kit includes a T-harness that greatly simplifies the install. There is no disassembly of the vehicle required. The T-Harness simply connects to the BCM located under the dash. There is zero wire splicing or cutting involved. Please see the video in the listing.
• ✅ COMPATIBLE VEHICLES – This kit is compatible with select Chevrolet Silverado’s and select GMC Sierra’s. 2014 Silverado & Sierra 1500 || 2015-2020 Silverado & Sierra 1500/2500/3500 || Compatible with both old body style and new body style.
• 🔴🔴 VEHICLE REQUIREMENTS 🔴🔴 – This kit will only work with a gas vehicle, automatic transmission, and key start. Will not work if the vehicle runs on diesel or has a manual transmission or is push to start.
• 🔴🔴Computer, Required 🔴🔴 – Pairing the remote starter to the vehicle requires the remote starter to be connected to a windows computer with a USB updater tool. The tool is is currently included in the kit

User questions & answers

Question:	should I request the Fortin Flash link to make this work
Answer:	I ordered the flash link and didn't have to use it. kit comes with a flash link
Question:	Can this system be programmed to work with a remote that has the remote start button on it or does it only work with 3x lock
Answer:	It works with 3x lock.
Question:	Will this work on a 2014 silverado? This kit says 2015 and up and the other kit says 2013 and older
Answer:	Ask the seller your question because mine wasn’t listed and it worked without using a few wire per the company.
Question:	Does this kit come with a remote
Answer:	No.

• ✅ START YOUR 2020 PTS TACOMA REMOTELY - Use the most complete Plug N Play Remote Starter KIT for Push-To-Start 2020 Tacoma’s to cool or warm your truck.
• ✅ START-X – This kit it is brought to you by Start-X, all technical questions should be addressed to highly responsive customer support at Start-X.
• ✅ PLUG ‘N PLAY T-HARNESS – The revised and unique Start-X T-Harness designed specifically for a Tacoma eliminates wire splicing and tapping. The Start-X T-Harness is clean and neat avoiding the common rat’s nest of wires. There is some disassembly of your truck required. Please see the video. Instructions are included, or you may view our instruction video for super easy and fast installation
• 🔴🔴 Wire Tap – The present updated kit, does not require any wire tapping or cutting all. A previous version did.
• ✅ OPEN DOOR SHUTDOWN, RANGE - When you open the door to the vehicle the engine will shut down. There is no way around this. After remote starting you will need to restart the engine before driving. The distance from where you can remote start is the distance you can lock your vehicle from. Please test your key fob to see the distance you will be able to remote start from.

User questions & answers

Question:	Is it compatible for rxd sport tacoma 2020 model
Answer:	No, very easy and simple. But you will have to cut one wire and splice it with the 2 lose wires.
Question:	Why do you need to cut the pink wire for this to work. You dont have to cut wires on the 2019 tocoma.the trucks are the same except for the power seat
Answer:	Simply put because the 2020 model is slightly different than the 2019 and won’t work if the instructions are not followed cutting the pink wire.
Question:	Do u guys have instraction which wire need to cut or connect
Answer:	The current version of this kit does not require any wire to be cut.
Question:	Why are there some saying 1 pink wire has to be cut but in the video it doesn’t show any wire being cut
Answer:	For the Tacoma, it definitely does either need to be cut or you need to use an additional wiring harness to avoid cutting the line. The instructions on what to cut are included in the box and they do have a description of how to do so on their web site as well.

Product features

Ready For Installation

The hassle-free installation makes it a great option for avid DIY-ers and those familiar with truck mechanics. With only two main wires to connect, this project is a short and simple one for hobbyists and mechanics alike. Each remote start module is pre-flashed with firmware that matches your vehicles compatibility prior to shipping to ensure an easy set up process.

If you’re not a regular diy-er, Start-X strongly suggests professional installation. Start-X helps home mechanics enjoy remote start. We are happy to assist with step-by-step instructions, however the installer is responsible for all aspects of installation.

Using Your New System

The module will monitor the OEM remote for 3X Lock and will start your automatic transmission truck. An aftermarket remote is not necessary, so there are no extra key fobs to carry around.

Safe & Secure System Control

While the module makes it easy to start your car remotely, we also understand the reality of how important the security of keyless start system. To make sure you have total control over your keyless start module, the device uses a self-learning algorithm to automatically detect the vehicle during programming and connect only to your specific key fob

We’re Here To Help!

While the Start-X module is an ideal solution for anyone looking to enjoy effortless remote start, we know that not everyone is mechanically savvy. From questions to full step-by-step instructions, Start-X is here. Start-X provides easy to install remote starters to the professionals and hobbyists alike, but does not take responsibility for any damage done during or after installation. While we are happy to assist with step-by-step instructions, the installer is responsible for all aspects of installation.

• ✅ START YOUR PUSH TO START TOYOTA REMOTELY - Use the most complete Plug N Play Remote Starter KIT to warm or cool your vehicle. No more waiting 10 min to defog your windshield.
• ✅ COMPATIBILITY – This listing is compatible with a 4Runner 10-19, Sienna 11-20.✅ ✅ ✅ ✅ Push to start vehicles only. ✅ ✅ ✅ .
• ✅ PLUG ‘N PLAY T-Harness – Revised, unique Start-X T-Harness designed specifically for select Toyotas. No wires need to be cut or spliced. However, there is some disassembly of your truck required. Please see the video. Instructions are included, or you may view our instruction video for super easy and fast installation.
• ✅ 3 X LOCK – No need for extra devices. Start your vehicle with clicking 3x lock on your factory remote. Press the lock button 3x again and the Start-X Remote Starter will turn off your Toyota too.
• ✅ OPEN DOOR SHUTDOWN, RANGE - When you open the door to the vehicle the engine will shut down. There is no way around this. After remote starting you will need to restart the engine before driving. The distance from where you can remote start is the distance you can lock your vehicle from. Please test your key fob to see the distance you will be able to remote start from.

User questions & answers

Question:	This is work with 2020 toyota sienna xle push start
Answer:	As of 9/222019 I believe it should work but cant guarantee it will work. If you would like to try it we can give you a discount and you can always return if it doesnt. Please contact us directly.
Question:	does this come with a remote to start it too
Answer:	No. It be use with your Oem remote making do the remote start function
Question:	I have a 2020 sienna le with regular key start but does have remote door locks. is this compatible or is there a different model that is
Answer:	This is only for push to start vehicles not key start,
Question:	Does this work for the 2020 sienna xle awd
Answer:	it worked on my 4runner do a little more research

Product features

Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included T-harness greatly simplifies installation. Plug N Play.

Using Your New System - 3X Lock

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket remote is not necessary, there are no extra key fobs to carry around.

Optional Long Range Remotes:

For extra long range you can add an optional long-range RF kit. If you want to go all out, you can choose a cell phone module which provides you the ability to start from virtually anywhere you have phone service.

Unique Start-X T-Harness

The included T-harness is a unique Start-X T-Harness that can not be found anywhere else. The T-harness is neat and avoids the the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.

• ✅ WHAT YOU NEED TO KNOW - This is a complete remote starter kit for 2014-2019 Ford Fusion - Push-to-Start - Gas. Includes a all-in-one remote start data interface bypass module. Firmware preloaded and is ready to be programmed to YOUR vehicle. All components required for installation are included. NOTE: You may need to visit the dealer to enable factory remote start options if you wish to control the climate controls and all other remote start features thru the cluster. Automatic Transmission
• ✅ REMOTE START FEATURES - This is an Add-on remote start system for vehicles with existing keyless entry. Does not include remotes - this uses your factory remotes to start your vehicle. No need to carry extra key fobs! Warm or cool your car from the comfort of your home.
• ✅ PLUG & PLAY INSTALLATION TYPE - This kit uses a plug-in T-Harness which dramatically reduces number of wiring connections that typical systems require. The installation of this product will require only the plug-in connection. We provide concise instructions with plug locations for seamless installation. Adding additional options may require additional wiring connections. A person with basic knowledge of wiring car electronics should be able to install this product successfully.
• ✅ MPC TECHNICAL SUPPORT - In our effort to, 'Go Green', we provide a link to download MPC's exclusive copyrighted installation tip sheet made by MPC's professional technicians to help you through the installation process. In case you get really stuck or have questions about options we include U.S. based technical support Monday-Friday 9am-5pm Arizona time. You can also open a web-based support ticket 24/7.

User questions & answers

Question:	Fusion, after we turn off the car, it starts again? sometimes twice. AND how do we turn on the parking light without splicing into the wiring
Answer:	If you do not press the start button and the start times out it will start again. If you have a forescan or an ids to program the vehicle the lights, AC and other features will work
Question:	Will this work on a2017 mazda
Answer:	No I'm sorry it will not, we do not have one right now for that.
Question:	Will this enable the remote start cluster features on a 2017 ford fusion se pts
Answer:	Wants it installed press the lock button three times and your car will start is that what you’re asking
Question:	Will the remote-start programmed remote still lock/unlock the doors
Answer:	Yes it will.

Product features

COMPLETE KIT

Everything you need is included in the kit to get the job done.

USE YOUR FACTORY REMOTE TO START YOUR CAR

Whether you need to warm up or cool down your car, it's as easy as one-two-three clicks on your lock button!

DOUBLE CHECK YOUR VEHICLE REQUIREMENTS:

This kit is compatible with push-to-start ignition and gas engine only

Start your vehicle’s engine and activate the heater/defroster or air conditioner remotely

• ✅ START YOUR TACOMA 2016-2019 REMOTELY - Use the most complete Plug N Play Remote Starter KIT for Push-To-Start Tacoma 2016-2019 to cool or warm your truck. ✅✅✅Separate kit available for 2020 Tacoma's, this kit wont work.✅✅✅
• ✅ START-X – This kit it is brought to you by Start-X, all technical questions should be addressed to highly responsive customer support at Start-X.
• ✅ PLUG ‘N PLAY T-Harness – Revised, Unique T-Harness designed specifically for a Tacoma. No wires need to be cut or spliced. However, there is some disassembly of your truck required. Please see the video. Instructions are included, or you may view our instruction video for super easy and fast installation.
• ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle with clicking 3x lock on your factory remote. Press the lock 3x again and the professional grade Start-X Remote Starter will turn off your vehicle too.
• ✅ OPEN DOOR SHUTDOWN, RANGE - When you open the door to the vehicle the engine will shut down. There is no way around this. After remote starting you will need to restart the engine before driving. The distance from where you can remote start is the distance you can lock your vehicle from. Please test your key fob to see the distance you will be able to remote start from.

User questions & answers

Question:	I just installed it on my 2018 tacoma and the air bag light came on.. can i return it and get a refund
Answer:	Just reset you airbag light with a jumper wire Again installer bumped the airbags or pulled a wire when installed the device
Question:	Will this work on 2019 toyota 4 runner trd off road
Answer:	Ask seller, read description see if will work for your vehicle
Question:	will it work for 2020 toyota tacoma
Answer:	I’m not sure because the 2020 Tacoma has updates over the 2019.
Question:	Does this work with 2018 toyota camry se
Answer:	You could trade in the Camry for a Tacoma, then it would work

Product features

Ready For Installation

The hassle-free installation makes it a great option for avid DIY-ers and those familiar with truck mechanics. With only two main wires to connect, this project is a short and simple one for hobbyists and mechanics alike. Each remote start module is pre-flashed with firmware that matches your vehicles compatibility prior to shipping to ensure an easy set up process.

If you’re not a regular diy-er, Start-X strongly suggests professional installation. Start-X helps home mechanics enjoy remote start. We are happy to assist with step-by-step instructions, however the installer is responsible for all aspects of installation.

Using Your New System

The module will monitor the OEM remote for 3X Lock and will start your automatic transmission truck. An aftermarket remote is not necessary, so there are no extra key fobs to carry around.

We’re Here To Help!

While the Start-X module is an ideal solution for anyone looking to enjoy effortless remote start, we know that not everyone is mechanically savvy. From questions to full step-by-step instructions, Start-X is here. Start-X provides easy to install remote starters to the professionals and hobbyists alike, but does not take responsibility for any damage done during or after installation. While we are happy to assist with step-by-step instructions, the installer is responsible for all aspects of installation.

• ✅ START YOUR Tundra 2018-2021 REMOTELY - Use the most complete Plug N Play Remote Starter KIT for Key Start Tundra 2018-2020 to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield. 🔴🔴 Key start vehicles only. Does not work with the 2020 Tundra Push To Start.
• ✅ PLUG ‘N PLAY T-Harness – The included T-Harness eliminates wire cutting or splicing. However, there is some disassembly of your truck required. Instructions are included, or you may watch our installation video.
• ✅ ZERO WIRE SPLICING - There is zero wire cutting or splicing required. Completely plugs in to factory connectors. 🔴🔴 2020 Tundra requires one wire cut, for the OEM remote to work when the vehicle is remote started. 🔴🔴
• ✅ NO NEED FOR EXTRA DEVICES - Start your vehicle with clicking 3x lock on your factory remote. Press the lock 3x again and the professional grade Start-X Remote Starter will turn off your vehicle too.
• ✅ CELL PHONE ADD ON – Remote start from virtually anywhere by adding a cell phone module https://www.amazon.com/dp/B07H9FLDCD. You can also add a long range remote - https://www.amazon.com/dp/B07H9HWQQJ

User questions & answers

Question:	I bought my 2020 tundra late last year (mfg in sept if i am not mistaken). will it work on my tundra
Answer:	Whatever you do do not buy from this vendor. They have no customer service, not even amazon could give me a number for them that works
Question:	Will the engine stop when you open the door
Answer:	No . Just do not press the brake without a key. Open the car place of operation, then press brake to the warning signs disappear. Wonderful device.
Question:	I just bought the 2020 Toyota Tundra. Will this work on the 2020 or do you have one that will work
Answer:	It worked on my 2020 Tundra that starts with a key. Only one wire splice.
Question:	Will this work on a 2020 Tundra
Answer:	As of 1/20/2020 The OEM Remote will not work when the vehicle is remote started in a 2020 Tundra. 2018 & 2019 The OEM remote will work.

Product features

Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included T-harness greatly simplifies installation.

Using Your New System - 3X Lock

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket emote is not necessary, there are no extra key fobs to carry around.

Unique Start-X T-Harness

The included T-harness is a unique Start-X T-Harness that can not be found anywhere else. The T-harness is neat and avoids the the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.

• ✅ START YOUR TRUCK REMOTELY - Use the most complete Plug N Play Remote Starter KIT to warm up your truck in those freezing mornings, by pressing lock 3 times on your existing remote. No more waiting 10 min to defog your windshield. 😊
• ✅ COMPATIBILITY – This kit is compatible with all 2018-2020 RAM Pickup trucks that use a key to start. Not Push to Start.
• ✅ PLUG ‘N PLAY T-HARNESS – The included Start-X T-Harness eliminates wire splicing and tapping.✅ ✅ Windows PC with Internet Explorer is required to complete the programming process. ✅✅
• ✅PROGRAMMING, TECHNICAL SUPPORT – Programming the remote starter module requires a windows computer with Internet Explorer. Users, without computer technical know-how, will find the programming complicated. Please contact Start-X support for any difficulties you may encounter. 🔴🔴During peak season, Start-X will only provide support via email. 🔴🔴
• ✅ RANGE – The distance you can remote start from is the same distance you can lock/unlock your truck. You may want to test your remote to see if it’s enough for your remote start needs. Plug N Play long range remotes are available at an additional discounted cost.

User questions & answers

Question:	Once the truck is started can you use the keyfor to unlock the doors
Answer:	Yes.
Question:	Does installing this void factory warranty
Answer:	No it does not
Question:	This work for 18 2500 diesel or just gas
Answer:	6.7L Cummins
Question:	Do you have one that works on 2017 ram 2500 gas
Answer:	Yes

Product features

Plug N Play Remote Starter Kit

YES! You can install a remote starter yourself. Please don’t pay exuberant dealer fees to have the dealer do what you can do yourself. The Start-X kit was designed with YOU in mind. You, the average car owner that can fix a thing or 2 yourself.

The included T-harness greatly simplifies installation. Completely Plug N Play.

ZERO WIRE TAPPING!

Using Your New System - 3X Lock

The module will monitor the OEM remote for 3X Lock and will start your vehicle when you press lock 3 times. An aftermarket remote is not necessary, there are no extra key fobs to carry around.

Unique Start-X T-Harness

The included T-harness is a unique Start-X T-Harness that can not be found anywhere else. The T-harness is neat and avoids the the usual "rats nest" of wires.

Complete Kit

The kit contains everything you need for a successful installation, We even include a pry tool to pop the panels and zip ties to secure the module.

• ✅ WHAT YOU NEED TO KNOW - This is a complete remote starter kit for 2011-2014 Ford F-150 - Key-to-Start - Gas. Includes a all-in-one remote start data interface bypass module, and T-Harness. Firmware preloaded and is ready to be programmed to YOUR vehicle. All components required for installation are included. NOTES - Automatic transmission only. Requires 2 original factory keys for programming. Cloned/copied keys will NOT WORK.
• ✅ REMOTE START FEATURES - This is an Add-on remote start system for vehicles with existing keyless entry. Does not include remotes - this uses your factory remotes to start your vehicle. No need to carry extra key fobs! Warm or cool your car from the comfort of your home.
• ✅ SEMI PLUG & PLAY INSTALLATION TYPE - This kit uses a plug-in T-Harness which dramatically reduces number of wiring connections that typical systems require. The installation of this product will still require some wiring connections. We provide concise directions with wire colors and locations. A person with basic knowledge of wiring car electronics should be able to install this product successfully.
• ✅ AVAILABLE OPTIONS (at additional cost) Evo Remote 1 Ready: Add 1 button remotes with extended range AM antenna. - Evo Remote 4 Ready: Add 5 button remotes with extended range AM antenna.
• ✅ MPC TECHNICAL SUPPORT - In our effort to, 'Go Green', we provide a link to download MPC's exclusive copyrighted installation tip sheet made by MPC's professional technicians to help you through the installation process. In case you get really stuck or have questions about options we include U.S. based technical support Monday-Friday 9am-5pm Arizona time. You can also open a web-based support ticket 24/7.

User questions & answers

Question:	On a 2013 F150 - Outside the plug-in connections, how many splices, and are the wires accessible or is steering column/dashboard disassembly required
Answer:	Hello, Just 2, here is a link to the instructions so you can see how easy it is, http://ts.mypushcart.com/tipsheets/B-4370-215/9543. The 2 connections are right at the OBD2 scan tool plug by the knee bolster on the drivers side, hope this helps, happy holidays, Pete.
Question:	What if you only have 1 key
Answer:	It will not work
Question:	Will my heat or A/c automatically turn on when it starts
Answer:	Hello, it will turn on to however you have left the settings when turning the car off, thank you, Pete
Question:	Will this void my warranty
Answer:	Hello, no this will not void your warranty. https://www.ftc.gov/enforcement/statutes/magnuson-moss-warranty-federal-trade-commission-improvements-act Check out the link, that explains it well. Thank you for your inquiry, Pete.

Product features

COMPLETE KIT

Everything you need is included in the kit to get the job done.

USE YOUR FACTORY REMOTE TO START YOUR CAR

Whether you need to warm up or cool down your car, it's as easy as one-two-three clicks on your lock button!

DOUBLE CHECK YOUR VEHICLE REQUIREMENTS:

This kit is compatible with Conventional key-to-start and gas engine only