12 best herculiner truck bed coating

Product description

Herculiner brush-on truck bed liner kit includes the following: one gallon of ready-to-use protective coating, one application brush for tight spots and corners, two rollers for easy/even application, one roller handle, and one abrasive pad to prepare truck bed. It has polyurethane and rubber granule coating that is applied in just 3 easy steps to the bed surface using the rollers and brush included with the kit. When cured, it provides a durable skid-resistant protective coating. Because it can bond to virtually any surface or material, Herculiner can be applied to wood, metal, concrete, aluminum, asphalt, rubber, fiberglass, and most plastics, including PVC.

• Herculiner, brush on bed liner Kit, includes 1 gallon of ready to use Black protective coating, application brush, 2 rollers for easy & even application
• Adds Extra shine to your product
• Manufactured in China
• Apply to metal, concrete, wood and more
• Tough, textured polyurethane protective coating
• 5 times thicker than other roll-ons
• Skid resistant surface which wont chip, flake, or peel

User questions & answers

Question:	I have a 2001 Dodge Dakota sport Ext, Cab w/ 6-1/2 ft' bed. I want to do the bed, sides and tail gate. Would 1 gal. be enough
Answer:	If your 2021 2.7L has a 5" exhaust the tip will fit on it. I doubt the 2021 2.7L has a 5" exhaust from the factory.
Question:	Can I do a recoat over my old herculiner
Answer:	If your ram 1500 has a 5" exhaust on it the tip will fit.
Question:	is Herculiner the same exact product as Rhino liner? Is Herculiner better than Line-X
Answer:	Yes , I applied it to my exhaust and mufflers !!!!!
Question:	How much coverage
Answer:	I have had on header on a atv for 6 months and still looks like new so I have to yes

Product features

Herculiner Brush-on Bed Liner Kit

Herculiner Brush-on Bed Liner is a polyurethane-based product that is designed to be easily applied to any truck bed with great results. It is important that you follow the application instructions as closely as possible. Any deviation or deletion from these application instructions may have a negative effect on the end results. Be sure to read all instructions and warnings completely before beginning.

Product description

The number-one-selling liner brand is now available in an easy-to-use aerosol spray, providing the same waterproof protection in the convenience of a spray-on coating. The tough, textured polyurethane formula is chip-, fade- and impact-resistant, and adheres to metal, fiberglass, wood and numerous other surfaces. The spray is great for touch-ups, cutting in before applying roll-on Herculiner, or protecting hard-to-reach areas like undercoatings and wheel wells. From front grills to back bumpers and any surface in-between, Herculiner provides permanent protection to keep things watertight and rust free.

• EASY DIY: Herculiner is the original do-it-yourself brush-on bed liner kit
• QUALITY: In three easy steps, your truck bed will be covered with a tough, textured polyurethane coating just like professional spray-on liners
• DURABLE: Provides a durable skid-resistant protective coating that prevents rust and won't chip or peel
• PROVEN: Has been the industry leader for over 12 years
• VERSATILE: Can be easily applied to many other surfaces such as concrete, plastic, rubber, metal, wood or fiberglass

User questions & answers

Question:	Is it gas resistant
Answer:	ANot 100% sure, but I believe it takes 4 bottles to do a truck bed.
Question:	Can I apply this right on my chrome front bumper to my truck? Will it stick to it without peeling? Thanks in advance
Answer:	Primer can only help adherence of any coating, except baked on products such as powder coating
Question:	Will it work on plywood
Answer:	You can use a roller, but I would not. First, the action of spraying is what gives the texture to the coating. There are not bits of sand inside the paint. I can't picture this coating without that texture. Second, the product is really thick so I would picture it rolling very uneven. The few corners I tried to do with a hand brush did not look good without a second coat. Third, the product is expensive and you could argue the roller will produce more waste than the waste used by the gun. Some reviewers have complained how the spray gun leaves a little product behind. The little bit left in the bottle I collected with a small touch up brush and used it for corners/nooks the spray gun may have missed (but had to apply two coats in these areas). If you are going to spend the money on multiple coats than perhaps points 2-3 are less relevant, but it does not change my first point.
Question:	Does the aerosol have any texture? Trying to touch up roll-on installation without having to buy an entire quart
Answer:	To cover the full bed I would recommend using the 4l kit with the spray gun I used 3-1/2 of them and 3 full coats

Product description

Already have rollers, abrasive pad, a paint brush and a can opener? Then all you need is bed liner to roll on to your truck bed, HERCULINER conveniently comes in gallon or quart sized cans. A gallon can cover between 55-60 sq. ft. of tough, textured polyurethane coating, that has been the industry leader for over 12 years. It prevents rust and won't chip, flake or peel and provides a durable skid-resistant protective coating when cured. HERCULINER isnt just for truck beds! With over 100 uses it can be applied to wood, metal concrete, aluminum, asphalt, rubber, fiberglass, and most plastics, including PVC

• EASY DIY: Herculiner is the original do-it-yourself brush-on bed liner kit
• QUALITY: In three easy steps, your truck bed will be covered with a tough, textured polyurethane coating just like professional spray-on liners
• DURABLE: Provides a durable skid-resistant protective coating that prevents rust and won't chip or peel
• PROVEN: Has been the industry leader for over 12 years
• VERSATILE: Can be easily applied to many other surfaces such as concrete, plastic, rubber, metal, wood or fiberglass

User questions & answers

Question:	Does it come in white
Answer:	Yes, it comes in many different colors, Depending on the availability from different suppliers.
Question:	How does this hold up to chemicals, specifically chlorine? Can a regular nappy paint roller be used
Answer:	This and many other products do not hold up to the use of chlorine. I just applied some of this product to my truck bed. It works great. Be careful when doing the tailgate. I wasn't and now steaks of this product can be seen. I will take if off with my products on hand. Any roller or brush will work. I used both of them.
Question:	I have a brand new truck, if I do the bumpers with this, will it look really ghetto or cheap, want to maintain my investment w/o ruining it
Answer:	I would not on a new truck!! I did the hood of my black 06 Suburban as the clear coat had failed and needed reprinting!! The look is good but I would accent your bumpers with "bush bumpers" if you are looking for an off road look !! Hugh Osborn
Question:	Is the product water based
Answer:	NO

Product description

Truck Bed Coating, Black, Container Size 1 qt. , Coverage 35 to 40 sq. ft. , Dry Time 4 hr. , Textured Finish, VOC Content 619g/L, Application Temperature 55 Degrees F, Application Method Roller or spray'

• Flash point: 31.0 degrees_celsius
• Prevents truck bed damage caused by scratches, rust and weather, while also enhancing your vehicle's appearance.
• Textured finish that forms to the contours of a truck bed
• Stops Rust formula
• Able to be rolled on or brushed on
• Also ideal for running boards, bedrails and more

User questions & answers

Question:	can this be painted or coloured readily
Answer:	Yes
Question:	How much prep work has to be done before application
Answer:	You just have to stir it up and use. No additives to mix in.
Question:	Does this product require a hardener? Can it be reused after opening
Answer:	Ye. but You still have to sand it a little so you can apply it correctly.
Question:	How well will this hold up for the interior of a jeep? Thanks
Answer:	Someone else answered “this paint is designed for metal”, but as an industrial painter, I would argue that this paint would bond amazingly well to wood. The porous nature of wood along with the thick and textured nature of this paint would create a very good mechanical bond when applied. Obviously some woods are more porous than others, so it may adhere to a soft wood like pine much better than a very dense wood like teak. Porosity aside, if you sand the wood very well with coarse sandpaper like 80 grit, you would still achieve an excellent bond. I would not use any sort of primer on the wood prior to application, however, don’t be surprised if the wood soaks up some the initial first coat. Cheers

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Get a fresh textured gloss black finish on the bed of your truck with the 2-pack of Herculiner Liquid Black Truck Bed Liner for 6 Foot Bed Quarts. Each 1-quart can is enough to finish a standard 6-foot truck bed or 12 to 20 square feet. When dry, the finish is skid-resistant and provides much-needed traction for years to come, due to its solvent-based properties. It is also great for patching up existing bed liners. This finish isn't just limited to truck beds, it is also great for giving steps and walkways extra traction. Compatible surfaces include wood, metal concrete, aluminum, asphalt, rubber, fiberglass, and most plastics, including PVC. Add some traction to your truck bed, stairs, walkways, and more with the 2-pack of Herculiner Liquid Black Truck Bed Liner Quarts.

• 2-PACK OF LIQUID LINER QUARTS: 2-pack of liquid truck bed liner provides a durable skid-resistant protective coating when cured
• LARGE COVERAGE AREA: Each quart covers 12 to 20 square feet; 2 quarts included total
• TOUGH FORMULA: Tough, textured formula has been the industry leader for over 12 years
• REFRESHES TRUCK BED: Gloss black finish gives it a “like new” finish that lasts
• VERSATILE USE: Flexible and repairable, while bonding to just about anything

User questions & answers

Question:	What color is this? I am searching for white
Answer:	Herculiner Bed Liner comes in Black and Gray. JCAllison
Question:	color? No me4ntion of it
Answer:	Herculiner comes in Black and Gray. JCAllison
Question:	Can we get a refund
Answer:	Wouldn't hurt to ask. JCAllison
Question:	How many square feet will one quart cover
Answer:	They say that 1 gallon will do a truck bed which are about 30 square feet. It actually covers more like 20 square feet.

Product description

Kit Contains:

4 - 750Ml Bottle Of Black Truck Bed Liner Base

1 - 1L U-Pol Raptor Standard Hardener

Includes Free Application Gun ($30.00 Value)

Mixing Ratio: 3:1 Truck Bed Liner Base: U-Pol Raptor Standard Hardener

U-Pol Raptor Bed Liner & Texture Coating Is A 2.1 Voc 2K Protective Urethane Coating Manufactured For The Application To Truck Beds, Wood, Concrete, Metal, Aluminum, Fiberglass, And On Most Oe Manufacturer'S Finishes. U-Pol Raptor Is Easy To Use. It Protects Against Rust And Corrosion, And Has Excellent Uv Protection. U-Pol Raptor Can Be Applied With A Schutz Gun. Simply Add Hardener, Shake And Spray. It Can Also Be Rolled Or Brushed On.

Tough, Durable 2 Part Urethane Coating(Also Available In Tintable In A Separate Listing)

Benefits:

- Easy To Use: Add Hardener - Shake - Spray

- Enough Material To Re-Spray The Largest Truck Beds

- No Need To Wax After Application Abrasion And Stain Resistant

- Protects Against Rust, Corrosion Salt, Damp & Extreme Temperatures

- Waterproof, Flexible, Helps Deaden Sound & Vibrations

- Apply With Shutz Gun, Roller Or Brush To Obtain Different Textures

- Provides Excellent Adhesion

Preparation: U-Pol Raptor Truck Bed Liner Can Be Applied To Most Original Manufacturers Finishes. The Surface Should Be Lightly Scuffed, And Free From Dirt And Rust. For Best Results Bare Metal Should Be Treated With A Suitable Etch Primer E.G. U-Pol Acid#8 (Up0776/ Up0741)

• Easy To Use: Tint - Add Hardener - Shake - Spray
• Enough Material To Re-Spray The Largest Truck Beds
• Abrasion And Stain Resistant
• Protects Against Rust Corrosion Salt Damp & Extreme Temperatures
• Waterproof Flexible Helps Deaden Sound & Vibrations

User questions & answers

Question:	How hard of a shell does this form? I'm thinking of using to coat the bottom of my kayak and wondering if it will hold up against hitting rocks
Answer:	I don't think so. I did a 5'x8' trailer bed, no sides or tailgate, and I used every drop of the 1 gallon can I bought.
Question:	Will this be enough to paint a metal bumper ? Already have it etched
Answer:	yes you can. I just redid the bed of my truck. used Lacquer thinner to prep it, then did 2 new coats on the bed walls and did 2 new coats on the bed. I use this stuff for everything and have found that if you paint over (Rattle cans) it as it tacks up, you get a nice glossy finish that lasts. The UV on the Herculiner isn't that good, But if you paint over it as it tacks it gives it the UV protection it is lacking. Did my sons off-road bumper, rock rails, and the entire interior floor 3 years ago still looks great.
Question:	How many cans would I need to cover a mini van? Body, undercarriage, hubcaps, and floor inside
Answer:	Two different mediums and two different application processes. Line-X is a professional / dealer applied finish... whereas Herculiner is a DIY product. I'm a firm believer that Herculiner is one of, if not, THE best DIY liner products out on the market. Better than Line-X? Maybe not. Best bang for the buck? Yes. Follow the directions and be critical of the prep process. Herculiner will serve you very well and turns out great.
Question:	Is 4L enough to do the inside cab of a full size bronco and large off road front bumper
Answer:	One gallon will easily put two heavy (rolled on) coats on a six foot pickup bed!

Product description

Kit Contains:

8 - 750Ml Bottle Of Black Truck Bed Liner Base

2 - 1L U-Pol Raptor Standard Hardener

Includes Free Application Gun ($30.00 Value)

Mixing Ratio: 3:1 Truck Bed Liner Base: U-Pol Raptor Standard Hardener

U-Pol Raptor Bed Liner & Texture Coating Is A 2.1 Voc 2K Protective Urethane Coating Manufactured For The Application To Truck Beds, Wood, Concrete, Metal, Aluminum, Fiberglass, And On Most Oe Manufacturer'S Finishes. U-Pol Raptor Is Easy To Use. It Protects Against Rust And Corrosion, And Has Excellent Uv Protection. U-Pol Raptor Can Be Applied With A Schutz Gun. Simply Add Hardener, Shake And Spray. It Can Also Be Rolled Or Brushed On.

Tough, Durable 2 Part Urethane Coating(Also Available In Tintable In A Separate Listing)

Benefits:

- Easy To Use: Add Hardener - Shake - Spray

- Enough Material To Re-Spray The Largest Truck Beds

- No Need To Wax After Application Abrasion And Stain Resistant

- Protects Against Rust, Corrosion Salt, Damp & Extreme Temperatures

- Waterproof, Flexible, Helps Deaden Sound & Vibrations

- Apply With Shutz Gun, Roller Or Brush To Obtain Different Textures

- Provides Excellent Adhesion

Preparation: U-Pol Raptor Truck Bed Liner Can Be Applied To Most Original Manufacturers Finishes. The Surface Should Be Lightly Scuffed, And Free From Dirt And Rust. For Best Results Bare Metal Should Be Treated With A Suitable Etch Primer E.G. U-Pol Acid#8 (Up0776/ Up0741)

• Easy To Use: Tint - Add Hardener - Shake - Spray
• Enough Material To Re-Spray The Largest Truck Beds
• Abrasion And Stain Resistant
• Protects Against Rust Corrosion Salt Damp & Extreme Temperatures
• Waterproof Flexible Helps Deaden Sound & Vibrations

User questions & answers

Question:	What size air compressor is best for painting a full size truck? Would a 3 gallon pancake be good enough? Does this affect quality of the paint job
Answer:	I didn't use a pancake but I did use a harbor freight 21 gallon compressor with the psi and about 50 to 60 it kept up just fine
Question:	I have a 1996 ford explorer sport. how many bottles would i need
Answer:	Probably about 8-10
Question:	Want to cover my homemade enclosed trailer. Will this adhere to plywood
Answer:	This stuff adheres to every and anything! However, you may need to add an extra coat, as wood is real poris. Good luck!
Question:	Looking to paint a 2009 subaru forester what size kit would you recommend
Answer:	8 liter. Spray at 65-70 psi for first coat then turn down to 55 psi for 2nd. You will start to get stretched bye end of 2nd coat.

Product description

Kit Contains:

8 - 750ml Bottle of Black Truck Bed Liner Base

2 - 1L U-Pol Raptor Standard Hardener

Includes FREE Custom Coat Bedliner Spray Gun with Regulator and Gauge ($34.95 Value)

Mixing Ratio: 3:1 Truck Bed Liner Base: U-Pol Raptor Standard Hardener

U-Pol Raptor Bed Liner & Texture Coating is a 2.1 VOC 2K protective urethane coating manufactured for the application to truck beds, wood, concrete, metal, aluminum, fiberglass, and on most OE manufacturer's finishes. U-Pol Raptor is easy to use. It protects against rust and corrosion, and has excellent UV protection. U-Pol Raptor can be applied with a Bedliner gun. Simply add hardener, shake and spray. It can also be rolled or brushed on.

Tough, durable 2 part urethane coating(Also available in Tintable in a separate listing)

Benefits:

- Easy to use: Add hardener - Shake - Spray

- Enough material to re-spray the largest truck beds

- No need to wax after application Abrasion and Stain Resistant

- Protects against rust, corrosion salt, damp & extreme temperatures

- Waterproof, flexible, helps deaden sound & vibrations

- Apply with Bedliner gun, roller or brush to obtain different textures

- Provides excellent adhesion

Preparation: U-Pol Raptor Truck Bed Liner can be applied to most original manufacturers finishes. The surface should be lightly scuffed, and free from dirt and rust. For best results bare metal should be treated with a suitable etch primer e.g. U-Pol Acid#8 (UP0776/ UP0741)

• Easy to use: Add hardener - Shake - Spray
• Custom Coat Bedliner Spray Gun features adjustable nozzle and includes Regulator and Gauge
• Abrasion and Stain Resistant
• Protects against rust corrosion salt damp & extreme temperatures
• Waterproof flexible helps deaden sound & vibrations

User questions & answers

Question:	Can you use this on plastic? Also is the reducer
Answer:	I did it and wish I had two more bottles
Question:	If you spray plastic like plastic bumpers will this product stick to it? Is there anything need do different for plastic besides the basic prep
Answer:	We’ve done inside and outsides of Jeeps. I would say 2 full kits for outside and another one if you want to do the inside (seats out etc).
Question:	Do you recommend doing the outside of a Wrangler JK and how much would it take
Answer:	One kit does 6 foot 5 bed truck
Question:	can you spray over rust, i have rust starting in seams that i will not be able to prep that well
Answer:	I would say that 6 bottles will cover 8 ft bed. I did inside of a two door jeep and both rear wheel wells with 2 solid coats and a third light coat using 4 bottles. I don't put heavy items like you, but I have had no chipping issues so far.

Product description

2 PART URETHANE - THE PROFESSIONAL'S CHOICE The tough, versatile protective coating specially developed to withstand the toughest situations ROLL-ON RAPTOR is a 2 part urethane coating that gives ultra-tough protection to vehicles and many other surfaces. It forms a highly durable, water resistant barrier that protects surfaces from impact, scratches, corrosion, chemical spillages, fuels, fresh and salt water and more. It's easy to use and dries quickly to give an attractive textured finish that performs in all climates and temperatures and resists fading from sunlight. Add RAPTOR TRACTION - Slip Resistant Additive (UP4800) to give a slip resistant finish to floors, steps, decks and more! WHERE TO USE ROLL-ON RAPTOR is perfect as a truck bed liner as well as having many other uses, including: Push bars, running boards, roll bars Trailers, Vans, ATV's Boats, decks, steps Floors and work surfaces Industrial and home surfaces EASY TO USE - just mix, shake and roll . KIT CONTENTS The Kit contains everything you need to cover up to 65 sq. ft. in 2 coats. 1 kit is sufficient for most standard sized truck beds. 2 kits are required for long bed (8') trucks. TOUGH & PROTECTIVE BED LINER KIT 2 x 750ml RAPTOR Bed Liner 2 x 250ml RAPTOR Hardener 1 x roller handle 2 x rollers 2 x trays 2 x abrasive pads 4 x pairs of gloves Instruction sheet BONUS 2 x anti-slip additive (for an anti-slip surface, if required).

• Impact, scratch and UV resistant
• Protects against corrosion, salt, water, chemicals & more
• Adheres to metal, wood, plastics, fiberglass, concrete
• The roller creates a textured, black finish
• UP5010

User questions & answers

Question:	Do you have to buy the acid etch and the primer
Answer:	I did not use an acid etch primer and the coating is adhering very well
Question:	where is this made in/manufactured
Answer:	I believe i read correctly on the package that it is manufactured in England
Question:	can this be aplied over rust
Answer:	Sure. But it will not stop the rust.
Question:	When the product is dry what kind of sheen does it have
Answer:	A textured satin to semigloss

User questions & answers

Question:	What colors are available
Answer:	black and tintable
Question:	I did a coat of raptor liner about 24 hours ago but need to do some touch up work or another coat.? What all do I need too do
Answer:	You can just go over it. Not going to mess it up.
Question:	I want to do a Chevy Avalanche top to bottom and all the plastics on it as well. How much will i need to get
Answer:	I did an entire Dodge Ram 2500 with a utility body. I used two kits of the tintable and two kits of the black.
Question:	do you provide tint? and have a color chart
Answer:	Rsptor Liner has some colors of tint available. I got our tint from Monstaliner because Raptor did not have what we wanted. You will have to go to their website. The Raptor Liner worked great with the Monstaliner tint.

Product description

DupliColor's Bed Armor is a water based formula , is low odor and cleans up with soap and water, prior to drying. It is formulated with Kevlar is resistant to gasoline and other automotive chemicals and withstands the extreme impacts of the most demanding truck loads. No working pot-life, so unused product can be stored and used for touch ups or other projects. It offers you superior adhesion, impact resistance and flexibility. One kit will cover a 6 foot box with an additional quart (optional BAQ2010) will cover a 8 foot box.

• Contains Dupont
• No working pot-life, can be reused
• The product weighs 10lbs
• Water based formula, easy to clean up and no re-coat window
• This item is not for sale in Catalina Island

User questions & answers

Question:	is the texture really coarse or can it be made into the texture you want
Answer:	You don’t have to fill it with water. You have to blow it up like a beach ball then attach a water hose to the port. It’s very simple to use.
Question:	Do you need a primer
Answer:	yes the rainbow tube needs to be totally full with air please make sure when you fill it up that no air escapes. also make sure to fill up the bottom packets with air and the ones that need water with water as much as you can. if all the pockets are full it should not even lean much at all!! hope you enjoy it its a real fun and exciting activity for the whole family and friends!!
Question:	how warm does it have to be to put it on
Answer:	In China
Question:	how much surface does 1 can of this duplicolor bedliner spray cover
Answer:	The best examples of the spray is in the second and third photos. It comes out in a fan shape, if that makes sense. Not straight down, at least not the way we have ours set up.

Product features

Bed Armor Truck Bed Coating Aerosol

Just like the Bed Armor Truck Bed Coating Kit, Bed Armor Aerosol is a water-based polyurethane formulated with ground up rubber particles to provide uniform texture and skid resistance - it’s easy to use and offers the same durability and protection. Bed Armor Aerosol won't chip, fade, or flake and has a textured, black satin finish to fully protect your truck bed - and any wood, concrete, fiberglass or metal surface.

Product description

Kit Contains:

6 - 750Ml Bottle Of Black Truck Bed Liner Base

1 - 1L U-Pol Raptor Standard Hardener

2 - 250Ml U-Pol Raptor Standard Hardener

Includes Free Application Gun ($30.00 Value)

Mixing Ratio: 3:1 Truck Bed Liner Base: U-Pol Raptor Standard Hardener

U-Pol Raptor Bed Liner & Texture Coating Is A 2.1 Voc 2K Protective Urethane Coating Manufactured For The Application To Truck Beds, Wood, Concrete, Metal, Aluminum, Fiberglass, And On Most Oe Manufacturer'S Finishes. U-Pol Raptor Is Easy To Use. It Protects Against Rust And Corrosion, And Has Excellent Uv Protection. U-Pol Raptor Can Be Applied With A Schutz Gun. Simply Add Hardener, Shake And Spray. It Can Also Be Rolled Or Brushed On.

Tough, Durable 2 Part Urethane Coating(Also Available In Tintable In A Separate Listing)

Benefits:

- Easy To Use: Add Hardener - Shake - Spray

- Enough Material To Re-Spray The Largest Truck Beds

- No Need To Wax After Application Abrasion And Stain Resistant

- Protects Against Rust, Corrosion Salt, Damp & Extreme Temperatures

- Waterproof, Flexible, Helps Deaden Sound & Vibrations

- Apply With Shutz Gun, Roller Or Brush To Obtain Different Textures

- Provides Excellent Adhesion

Preparation: U-Pol Raptor Truck Bed Liner Can Be Applied To Most Original Manufacturers Finishes. The Surface Should Be Lightly Scuffed, And Free From Dirt And Rust. For Best Results Bare Metal Should Be Treated With A Suitable Etch Primer E.G. U-Pol Acid#8 (Up0776/ Up0741)

• Easy to use: TINT- ADD hardener - SHAKE - SPRAY
• Enough material to re-spray the largest truck beds
• Abrasion and Stain Resistant
• Protects against rust corrosion salt damp and extreme temperatures
• Waterproof flexible helps deaden sound and vibrations

User questions & answers

Question:	Is six bottles enough for two goof coats on an eight foot bed
Answer:	The texture is Medium at best not coarse but it is 3 times as thick as the store bought spray cans, I did my entire bed of the 67 el camino with one can, it sprays on quite well with the optional spray gun and an air compressor.
Question:	How many spray do I use to paint a jeep wrangler
Answer:	No primer needed. Just use the scuff pad provided in the kit or sand paper or anything to rough up the paint and apply. I used an electric sander on my truck and it stuck much better than the scuff pad allowed it to
Question:	Coverage square feet
Answer:	We did not use it for the truck bed but for a wood bridge so my horses would not slip going over it. It was warm when we put it on and has lasted fantastic with them walking on it every day.
Question:	Will this kit cover the bed of a 2007 f350 lariat 8 foot bed? how many coats? does it chip easily? for example if i have two pallets of block loaded w
Answer:	Hello. I got this to find out how well it covered. Still unused. If say 4ftx4ft 1/8 inch if I had to guess. May hv to try it out today. It's sunny.