10 best headache for trucks

Product description

Headache racks, also known as truck cab racks protect the rear window of your truck from shifting cargo by fully framing it and covering the glass. The Louvered Design retains visibility while also keeps the cab cooler by blocking light from entering the rear window.



Package Included:

1 X Cab Guard

Hardware/gaskets as shown



This product is compatible with:

09-17 Dodge Ram 1500

07-17 Tundra

95-17 Ford F-150

99-17 Chevy Silverado 1500 2500 3500 & HD

99-17 GMC Sierra 1500 2500 3500 & HD

• ▶️ 69.5" Wide X 26" Tall / Up to 750Lbs Load Capacity
• ▶️ Steel Construction / Powdercoated Finish
• ▶️ Easy Bolt-In Application / Louvered Window Guard Design
• ▶️ Over Cab Design for Storing Large Cargo
• ▶️ Adjustable Fit to Most Truck Beds

User questions & answers

Question:	Is it compatible with a tool box
Answer:	There's a complete list of the contents in the pictures at the top of the page
Question:	If this is 70 wide, how does it fit in a chevy that is only
Answer:	There are pockets and loops for everything to be separated
Question:	Will this fit with a tonneau cover
Answer:	It's against the law to ship a filled oxygen cylinder
Question:	What is the distance between the 2 uprights at the top
Answer:	One tube of grease.
Question:	Can I play my music on this air horn
Answer:	Clear - no color
Question:	Is it higher pitch or a low pitch
Answer:	It fits into my standard small grease gun. Not sure what number it is, but it is standard size.
Question:	Does it come with air pump
Answer:	Works to control wear and tear
Question:	What size is the air fitting
Answer:	It should be appropriate. I use it for my annual lubrication of my Swimex motor and paddle wheel bearings. I have to be careful of not injectioning too much in the bearing compartment or it leaks out.
Question:	Is the diaphragm chrome or black? Can it withstand 150psi
Answer:	Black and a little less viscous that wheel bearing grease.
Question:	Is the diaphragm end a single cast piece or this four discrete horns on a manifold
Answer:	My humble opinion is to use silicone spray on the rubber/weather band stripping and wipe off any excess that gets on your car paint. Save the white lithium spray for metal on metal joints or hinges. I hope that helps and good luck.

Product description

Protect yourself and the cab of your truck from shifting cargo with this sturdy steel headache rack. The grid-style screen shields you without obstructing your view. Bottom adjusts from 63" to 73" to fit different truck bed widths.

• Commercial grade steel for heavy duty use.
• Large 2" square powder coated steel tube. Welded 3/16" cold-rolled wire.
• 2" wire screen provides full visibility.
• No-drill bolt-on installation for tricks with stake pockets.
• Knockdown Type for compact packaging.
• Strong construction design.
• Top open window provides full visibility.
• PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION

User questions & answers

Question:	Does the 50257 rack come with the mounting harware for the stake pockets
Answer:	I purchased this for one of our plant’s EMTs so I’m not using it but it seemed to be stocked with quality supplies.
Question:	How high is the rack? Will it actually go over the roof line of my 2013 dodge ram
Answer:	Yes it comes with a regulator. You'll need to have the bottle filled.

Product features

Quick and Easy Installation

MAXXHAUL 50257 Knockdown Type Steel Headache Rack

• 63" - 73" Adjustable Base Length
• Commercial grade steel for Heavy Duty use
• Protect yourself and the cab of your truck from shifting cargo
• No-drill bolt-on installation for trucks with stake pockets
• The grid-style screen shields you without obstructing your view
• Weight of Rack: 42 lbs
• Minor assembly required

50257 Headache Rack

• Protects your window from the dangers of loose and shifting cargo
• Designed to prevent scratches, dents, or breakage of your trucks rear window
• Middle section open for easy access to the pickup bed through the rear window

50366 - Middle Rack Section (Sold Seperately)

• MaxxHaul 50366 Middle Headache Rack Section offers full window protection for bigger cargo
• Easy to install and remove when desired

MaxxHaul 50257 & 50366

• The MaxxHaul 50256 & 50366 together provide full window protection for your trucks back window against shifting and loose cargo
• Conveniently install or remove the MaxxHaul 50366 for any project with ease

Product description

Each BACKRACK Truck Rack is engineered to fasten securely in the truck's stake pockets, and install in minutes.  Installation requires no drilling on the majority of trucks, and each BACKRACK Cab Guard is compatible with over and under the rail bedliners as well as spray in liners and most popular Tonneau Covers.  With eight distinct styles of quality BACKRACK Truck Racks, you're sure to achieve the great look you want while providing the ultimate strength and utility you require. BACKRACK 's three different styles of quality mounting brackets give you the choice of Standard no drill, Toolbox no drill, or Low Profile drill installation. Personalize your BACKRACK Truck Rack with our wide array of accessories that simply bolt or clamp on, allowing you to install lights, antennas or most any accessory with no drilling required. Our Siderails, Rear Bar Ladder Rack, and new Tool Holder allow you to get organized while maintaining your truck's good looks.

• Package Dimensions: 2.5 H x 72.5 L x 26.0 W (inches)
• Package Weight: 42.0 pounds
• Low profile design allows you to park your truck in places without restrictions
• The simple and open design makes it easy to hook a bungee cord or ratchet strap around the flat bar
• Fit type: Vehicle Specific
• Frame Only included, no bracket

User questions & answers

Question:	Will it fit a
Answer:	You need the Backrack 50127 Tonneau Cover Adapter so the trifold cover slides unnderneath.
Question:	With this work with a tyger tri fold cover
Answer:	Don’t know about ram box?
Question:	Does it work with Rambox
Answer:	It will obstruct the camera.
Question:	Does this block the cargo camera
Answer:	Technical Details Manufacturer Backrack Brand Backrack Item Weight 42 pounds Product Dimensions 72.5 x 26 x 2.5 inches Item model number 15024

Product description

The ARIES Switchback headache rack is an aggressive, off-road-style truck headache rack that features rust-free construction and an LED-compatible top edge -- all to make sure your truck not only stands out on the road, but also has the backbone to tackle the trail. The Switchback truck headache rack is built with all-aluminum construction, meaning you will never have to worry about rust. Aluminum offers solid strength while helping to keep your truck lightweight. The aluminum alloy is also protected with a highly durable carbide black powder coat finish that maximizes corrosion resistance and adds a sleek finishing touch. The Switchback is built to readily accept aftermarket lighting. Its top edge is a slotted channel that accepts LED light bars or work lights. Three 10" LED light bars (ARIES #1501260) are recommended. The slotted channel allows for easy installation of the lights and adjustable positioning. The Switchback also features a three-piece assembly, making it easier to ship, and allowing you to mount the headache rack without the center section for easy access to the rear cab window. Each ARIES Switchback headache rack is designed for vehicle-specific installation for a custom fit. This particular model fit specific years of the Toyota Tacoma (see application info to verify fitment). Brackets and mounting hardware are included.

• AGGRESSIVE STYLE. This offroad style truck headache rack adds an aggressive, aftermarket look to your pickup truck, featuring an angular design, custom contours for each application and a stamped grid center section
• LIGHTWEIGHT. Switchback pickup truck racks are constructed from aluminum to weigh less than steel models and keep your truck fuel-efficient and agile on the trail
• OFFROAD READY. This aluminum headache rack is shielded in a sleek carbide black powder coat finish for maximum resistance to the elements
• LED-COMPATIBLE. Switchback headache racks for pickups accept LED lights and light bars, featuring a slotted top edge. You can add a custom, aftermarket look and functional lighting for the trail. Three ARIES 10-inch light bars #1501260 recommended
• EASY INSTALLATION. This pickup truck headache rack is installs fast and easily, and it fits select model years of the Toyota Tacoma

User questions & answers

Question:	How is this installed if the Tacoma does not have pocket stakes? Are there brackets to install directly to the bed accessory rails
Answer:	Yes. Brackets attach to factory bed rail. Instal was straight forward and easy.

Product features

ARIES Switchback Truck Headache Rack

The ARIES Switchback pickup truck headache rack is the perfect hybrid of aggressive style and functional customization. From its powder-coated aluminum construction and stake pocket mounting system to its LED-ready top edge and three-piece design, the Switchback headache rack is modern customization for the modern pickup truck.

Each Switchback truck headache rack is designed for vehicle-specific application, contouring to the lines of each unique make and model and ensuring the fastest possible installation.

Customizable top track

All along the top edge of the Switchback headache rack is a slotted channel. These slots provide a highly versatile and adjustable mounting platform for any combination of LED light bars and work lights.

Aggressive design

The Switchback truck rack is built to add an off-road-ready look to your truck, featuring an edgy mesh center section that can be removed for rear window access and an angular frame that contours to the cab.

All-aluminum build

To ensure that rust will never be a problem and to keep your modern truck light on its feet, the Switchback headache rack is made from aluminum alloy and bolted together with stainless steel hardware.

Tough powder coat finish

While aluminum is impervious to rust, the Switchback truck headache rack also features a highly durable carbide black powder coat finish. This adds a sleek, professional look and maximizes corrosion resistance.

Product description

Each BACKRACK Truck Rack is engineered to fasten securely in the truck's stake pockets, and install in minutes.  Installation requires no drilling on the majority of trucks, and each BACKRACK Cab Guard is compatible with over and under the rail bedliners as well as spray in liners and most popular Tonneau Covers.  With eight distinct styles of quality BACKRACK Truck Racks, you're sure to achieve the great look you want while providing the ultimate strength and utility you require. BACKRACK's five different styles of quality mounting brackets give you the choice of Standard no drill, Toolbox no drill, or Low Profile drill, Low Profile Tonneau, Over the Rail Tonneau installation. Personalize your BACKRACK Truck Rack with our wide array of accessories that simply bolt or clamp on, allowing you to install lights, antennas or most any accessory with no drilling required. Our Siderails, Rear Bar Ladder Rack, and new Tool Holder allow you to get organized while maintaining your truck's good looks. Late model trucks only

• Package Dimensions: 185.42 H x 10.16 L x 72.39 W (centimetres)
• Package Weight: 21.183 kilograms
• Country of Origin : Canada
• Compatible with vehicle type: Truck
• Fit type: Vehicle Specific

User questions & answers

Question:	what is the distance between the top posts? I would like to put an led light bar between them
Answer:	It would be right, but if you get a 24” instead of 36” and a flat folded model it might fit
Question:	Will this interfere with my backup lights and bed cam (2017 ram 2500 mega cab
Answer:	This trauma bag is not designed to accommodate an O2 cylinder. It is strictly a large trauma bag. Check out the LXMB65, it will satisfy your needs.
Question:	What mounting kit do I need due to the fact that I have a toolbox
Answer:	If you order the complete kit there is a list of all items included
Question:	Does this fit a Toyota T
Answer:	Overall Dimensions: 20"(L) x 16"(W) x 10"(H)

Product description

Each BACKRACK Truck Rack is engineered to fasten securely in the truck's stake pockets, and install in minutes.  Installation requires no drilling on the majority of trucks, and each BACKRACK Cab Guard is compatible with over and under the rail bedliners as well as spray in liners and most popular Tonneau Covers.  With eight distinct styles of quality BACKRACK Truck Racks, you're sure to achieve the great look you want while providing the ultimate strength and utility you require. BACKRACK 's three different styles of quality mounting brackets give you the choice of Standard no drill, Toolbox no drill, or Low Profile drill installation. Personalize your BACKRACK Truck Rack with our wide array of accessories that simply bolt or clamp on, allowing you to install lights, antennas or most any accessory with no drilling required. Our Siderails, Rear Bar Ladder Rack, and new Tool Holder allow you to get organized while maintaining your truck's good looks.

• Truck racks maintain your truck's stylish good looks while providing you with a practical tool to carry ladders and loads
• The simple and open design makes it easy to hook a bungee cord or ratchet strap around the flat bar
• Low profile design allows you to park your truck in places without restrictions
• Compatible with tonneau covers, mount lights or accessories
• Hardware Kit sold separately
• Fit type: Vehicle Specific

User questions & answers

Question:	What is the difference between this rack and one that fits a 2008 f250? The dimensions look the same
Answer:	a small one in the middle. I use that space for rope for repelling gear.
Question:	Dose this come w mounting brackets
Answer:	It only comes with one chest seal
Question:	Will the 30221TB product for tool box complete the mounting requirement
Answer:	we should be receiving a shipment on Tuesday
Question:	How do you determine which model fits which truck model
Answer:	I learned some things about plastic and extreme temperatures while searching for answers to your question. So, I copied and pasted the info I found from Google below: Does plastic become brittle when cold? "Chemical failure occurs as a result of exposure to extreme temperatures. If a product is exposed to a very high temperature it can melt and warp. On the other hand, plastic products can become brittle when forced to endure extremely cold environments, which can make them prone to cracking and shattering." How does temperature affect plastic? Most of the effects of temperature to thermoplastic occur at high heat levels, although excessively low temperatures can have an impact as well. Mechanical properties, chemical resistance, electrical conductivity, material fatigue, and many other attributes can be affected by increased temperatures. Jun 27, 2016 What materials can withstand extreme cold? Micro-composites combine a carbon, metal or ceramic base (reinforcer) with a polymer (glue) to produce a material which can withstand extreme temperatures - from almost 400 degrees F to below freezing. Jul 26, 2010 Why does cold make things brittle? But below a certain temperature—called the glass transition temperature—a solid goes from ductile to brittle because molecules cannot easily slip and slide on a microscopic scale, bonds cannot break and reform, and thus cracks will start and quickly spread, causing the material to become brittle and break. At what temp does plastic melt? While the melting points of different types of plastic vary widely, most of them are comfortably above the maximum temperature of liquid water under normal conditions, or 100 degrees Celsius (212 degrees Fahrenheit). Why do plastics become brittle over time? Chemical failure occurs as a result of exposure to extreme temperatures. If a product is exposed to a very high temperature it can melt and warp. On the other hand, plastic products can become brittle when forced to endure extremely cold environments, which can make them prone to cracking and shattering. At what temp does plastic become toxic? Some polymers can emit toxic substance at 120 degrees Celsius and some can withstand 420 degrees with almost zero levels of emittions. At extreme temperatures, polymers will simply burn down very quickly - leaving no toxic materials around. Can the sun melt plastic? The power of the suns heat does not create any physical change in PET plastic, * but it is plausible that it may soften the plastic, and in some cases of extreme heat it may melt or leech into liquid or food. Oct 13, 2016 * I assume that the sun will not change plastic when left in the open. If left in the trunk of a car, however, that may be a different story; depending on the ambient temperature. Also, don't know if the plastic in the IFAK is PET. Another question that the vendor might be able to answer.

Product description

Each BACKRACK Truck Rack is engineered to fasten securely in the truck's stake pockets, and install in minutes.  Installation requires no drilling on the majority of trucks, and each BACKRACK Cab Guard is compatible with over and under the rail bedliners as well as spray in liners and most popular Tonneau Covers.  With eight distinct styles of quality BACKRACK Truck Racks, you're sure to achieve the great look you want while providing the ultimate strength and utility you require. BACKRACK 's three different styles of quality mounting brackets give you the choice of Standard no drill, Toolbox no drill, or Low Profile drill installation. Personalize your BACKRACK Truck Rack with our wide array of accessories that simply bolt or clamp on, allowing you to install lights, antennas or most any accessory with no drilling required. Our Siderails, Rear Bar Ladder Rack, and new Tool Holder allow you to get organized while maintaining your truck's good looks.

• No drill Hardware Kit is designed to be used on trucks that will not have a cross bed Toolbox
• The system consist of Railmont Bracket and Rail Plate that addes strength to the sheet metal bed rail
• Rail Plate provides solid base on which to secure Cab Guard assembly
• Only this Hardware Kit is compatible with Tonneau Cover Adapter Brackets
• Fit type: Vehicle Specific

Product description

Each BACKRACK Truck Rack is engineered to fasten securely in the truck's stake pockets, and install in minutes.  Installation requires no drilling on the majority of trucks, and each BACKRACK Cab Guard is compatible with over and under the rail bedliners as well as spray in liners and most popular Tonneau Covers.  With eight distinct styles of quality BACKRACK Truck Racks, you're sure to achieve the great look you want while providing the ultimate strength and utility you require. BACKRACK 's three different styles of quality mounting brackets give you the choice of Standard no drill, Toolbox no drill, or Low Profile drill installation. Personalize your BACKRACK Truck Rack with our wide array of accessories that simply bolt or clamp on, allowing you to install lights, antennas or most any accessory with no drilling required. Our Siderails, Rear Bar Ladder Rack, and new Tool Holder allow you to get organized while maintaining your truck's good looks.

• Package Dimensions: 7.0 H x 14.0 L x 13.0 W (inches)
• Country of Origin : Canada
• Package Weight: 25.0 pounds
• Fit type: Vehicle Specific

User questions & answers

Question:	Does this come as a pair
Answer:	Not as loud as the compressed air horns but still loud. It scared a bear away.
Question:	Has anybody used this with a 2019 F
Answer:	https://www.amazon.com/Lightning-Special-Events-Responder-Backpack/dp/B00D64ACU0/ref=sr_1_1?ie=UTF8&qid=1542721925&sr=8-1&keywords=lxmb40
Question:	Do these brackets cause hard bed cover to leak in rain and snow or does it sit low enough so cover seals good
Answer:	The fill kit in this one is LXSMK-B. The large kit has LXSMK-C. You can look up each of those here on Amazon and see the differences.
Question:	I have a 2014 tundra with a cover that sits on the top of the bed sides .. if I buy these and the proper headache rack will it work
Answer:	Yes it does. You’ll be busy though opening all the packages because they’re individually wrapped .

Product description

This Back Rack 3 inch Ladder Rack is made of steel and comes in black.

• Package Dimensions: 184.15 H X 6.35 L X 12.7 W (Centimeters)
• Country Of Origin : Canada
• Package Weight: 9.117 Kilograms
• Product Type:Vehicle Rail

User questions & answers

Question:	Will it fit 2004 Toyota tundra
Answer:	It is on a single cast piece that is divided to 4 air inlets.
Question:	This fit to my 2019 Ram
Answer:	At a slight angle
Question:	Anyone know if you can buy just the brackets to go in the stake pockets
Answer:	On the packaging, the description refers to "110db blasts"
Question:	I have a 15004 BackRack but do not know which kit I can use with it
Answer:	Mine just came. The package states very clearly TOY. It’s made of 100% plastic. Nowhere on it does it say coast guard approved. It’s a pos.

Product description

Westin's commercial grade HD Headache Rack protects your rear window from potential damage from shifting cargo. Welded tie-off hooks for securing your load are standard on all applications. Angled louvers keep sunlight out, the cab cool, and prevent UV damage to your interior all while allowing unobstructed visibility. 4 mount tabs give you the option of adding safety lights or accessories. Accommodates all major brand tool boxes. 2" diameter round top tube makes it easy to slide ladders and cargo. Includes complete mounting hardware for simple, bolt-on installation. Heavy duty black or white powder coat finish.

• Fit type: Vehicle Specific
• Package Dimensions: 72 L x 5 H x 33 W (inches)
• Package Weight : 86 pounds
• Country of Origin : China

User questions & answers

Question:	Can this fit a 2004 ford f150 heritage
Answer:	Hi! It has a low titch sound.
Question:	Can this rack be tilted back for low clearance parking structures by removing some screws from the mounting bracket
Answer:	hi! This horn by itself requires an On-Board air system (as described in the ad). We have the same air horn with dual mini air compressors. We are currently out of stock. it will be back in stock in 4-5 days. Please try then to look for it on amazon, by searching for the item at Amazon. The stock # is V4008K-2C Thank you, Morty
Question:	how far is the top of the cross bar above th roof on a 2018 tundra
Answer:	The air inlet fitting will fit a 1/4" OD air hose. Thank you, Morty
Question:	does it include everything shown in the picture? I'm asking about the metal brackets that are connected to the headace rack and laying on top of the bed
Answer:	The hole thing is chrome. By no means is it show Quality chrome.My is under the truck so it never bothered me. I would definitely not run 150 psi to it.115psi is probably max

Product features

Westin HD Headache Rack

Westin Commercial Grade HD Headache Racks protect your truck's rear window, and include angled louvers to provide shade to the interior. Product features a 2" round upper body tube for easy cargo adjustment, and 4 welded light tabs for mounting a Westim LED Light Bar or a combination of post mounted Auxiliary and Work Utility LED Lights. A crossover tool box up to 70" wide can be easily mounted over the rack's bed rail mounting brackets. A separate mount kit is available to accomodate boxes larger than 70" wide. Mounting brackets feature a laser-cut Westin logo and have a 4-bolt support for a secure fit. Available in black or white powder coat finish. Mounting kit and hardware are included.

Features

• Angled louvers provide shade and protect rear window
• 2" diameter round top tube
• Welded tie-down hooks
• 4 mounting tabs for lights
• Drilling required