6 best bike fork holder

• ✅ Versatile: Great for Storage or Transportation. Can be mounted in a garage, home, shed, etc for storage. Can be mounted in a truck bed, van, or on a trailer for transportation.
• ✅ Comes with quick release skewer for quick access.
• ✅ Strong and lightweight Alloy Construction.
• ✅ Mount for 9x100. Fits many bicycles that use a standard 9x100 drop out.
• ✅ 1 Year Manufacturer warranty against defects. Satisfaction Guaranteed. ✅

User questions & answers

Question:	Dimensions? HxLxW
Answer:	50 x 110 x 38mm, the skewer is apox. 170mm as well, thank you for your inquiry!
Question:	What diameter are the mount holes
Answer:	I used a 1/4" drill bit and 1/4 x 3/4 bolts and they fit perfectly. Obviously the length of bolt may vary depending what you're mounting to.
Question:	Hello. Does it fit for a 9mm bicycle fork mount
Answer:	It fit my bike... I think it’s standard size. I will tell you that I tried to weld it in my truck and it’s not real steel.
Question:	Can I buy a replacement nut that was lost
Answer:	I am sure you can just head to Lowes un the hardware section & you should be able to match one there or if it's the special one on the end of the axle you get that at a local bicycle shop

Product features

Strong & Lightweight

Perfect for Storage

Essential for Transport

Product description

Secure your bike in the back of your SUV, in your pickup, or even on top of your car with the Delta Bike Hitch Pro 2 locking fork mount. The Bike Hitch Pro 2 pairs conveniently with the Delta Stable Loader, Wheel Hitch, or Wheel Holder, and keeps your bike from rattling around as you head to the trails or country. The mount features Delta's patented locking lever for security, along with an ultra-rigid 9mm skewer. The mount also offers pre-aligned positioning for easier fork installation. And the Bike Hitch Pro 2 holds up to rough weather thanks to the special anti-rust treatment and tough powder-coat finish.

Secure your bike in the back of your SUV, in your pickup, or even on top of your car with the Delta Bike Hitch Pro 2 locking fork mount. The Bike Hitch Pro 2 pairs conveniently with the Delta StableLoader, Wheel Hitch, or Wheel Holder, and keeps your bike from rattling around as you head to the trails or country. The mount features Delta's patented locking lever for security, along with an ultra-rigid 9mm skewer. The mount also offers pre-aligned positioning for easier fork installation. And the Bike Hitch Pro 2 holds up to rough weather thanks to the special anti-rust treatment and tough powder-coat finish.

• Locking fork mount secures bikes to the back of a pickup, SUV, or car roof top
• Pre-aligned, 9-millimeter skewer for easier bike entry/exit and extra security
• Patented locking lever does not include lock
• Special anti-rust treatment with tough powder-coat finish
• Lifetime warranty against defects

User questions & answers

Question:	What is the difference in this one and the basic delta mount that is $10 cheaper
Answer:	It's about 1-1/2 inches
Question:	Are you suggesting to you use 5/16 screws for mounting the fork? Is that how large the two holes are
Answer:	Yes either flat to wall holding up or opens to 90 degrees and locks I used for small extendable table in motor home work great
Question:	Is the mount steel or aluminum I want to weld it to my custom tire rack in the bed of my truck
Answer:	I think from the description it will hold 60kg, "the maximum can reach 60kg" reach = support? I don't know what else the weight would refer to.
Question:	Can someone tell me how The lock mechanism work? Thank you
Answer:	I have ordered cards from Baron-Barclay for many years. I have never seen jumbo cards from them.
Question:	How far apart should these be from each other? I have about 5 feet of space and would like to fit as many as I can
Answer:	No, but each deck has a card with bridge scoring.
Question:	Would this work with beach-cruiser type bikes? (Yes, they don't have the quick-release front wheels, but after unbolting
Answer:	yes and a top loader
Question:	How does the quick release work? Am i missing something or is the unscrewing the quick release? I feel like I am missing something about the lever
Answer:	It is a real Pokemon TCG card...
Question:	Will it work with thru axel
Answer:	Yes, these EX cards have text in English, though the artwork will usually show Japanese characters.

Product features

STORAGE

TRANSPORT

RASKS

STORAGE

DELTACYCLE

For over 30 years, creating and selling useful cycling products with an innovative difference has been our mission. With proud roots in the early environmental movement, enhancing the cycling experience has been a labor of love for us here at Delta since our inception. We want to help people enjoy their cycling so there will be more bikes in use every day.

Product description

ALAVENTE 2 Pcs Bicycle Quick-Release Alloy Fork Block Mounts

Car Rack Carrier Holders for Car Pickup Bed

FITMENT: Bike quick release alloy fork block mounts universal for most Pickup.

Please verify that this part fits your vehicle before you purchase

SPECIFICATION:

QTY: 2 Pcs

Material: Alloy

Dimension: As Shown In The Picture

Instruction: Not Included

FEATURES:

- Aftermarket bicycle block quick-release fork mounts;

- Quick-release skewer for quick access;

- Strong, lightweight alloy construction;

- Designed to be mounted on any firm surface;

- Can be mounted either vertically or horizontally.

PACKAGE INCLUDED:

A pair of bicycle block quick-release fork mounts for Pickup

NOTICE:

Our parcel delivered by Amazon, it may damaged on the way to you,

cause some accessaries will be missing, so please contact us

immediately as well as offer picture or video to show the problem, tell

us what items you are missing, we will help you fix the problem, thanks!

• ✅ Strong and lightweight Alloy - This bike fork mounts made of aluminum material, durable and compressive, safe and stable.
• ✅ Small and Light - Light weight and small size design will not make your car deformed, easy to carry, no burden.
• ✅ Multi-function - Great for Storage or Transportation. Can be mounted in a garage, home, shed, etc for storage. Can be mounted in a truck bed, van, or on a trailer for transportation.
• ✅ Designed to be mounted on any firm surface, can be mounted either vertically or horizontally.
• ✅ Easy to install - Convenient and simple installation steps, comes with quick release skewer for quick access, let you install and use quickly.

User questions & answers

Question:	What is the inside dimension of the "U" bolt? i.e. Does it fit around a one inch diameter pipe
Answer:	It folds up and there is a hook to keep it in the open position. See the following image for an illustration: https://images-na.ssl-images-amazon.com/images/I/91Mav42aSaL._AC_SL1500_.jpg
Question:	What size of bar is needed for these or what is the largest they will fit
Answer:	The opening of the tailgate flap starts approximately 3 inches down from the top of the tailgate. The flap is approximately 10 inches tall X 13 inches wide. So the bottom of the opening would be 13 inches from the top of the tailgate.
Question:	I have the tool aero dynamic roof racks On my 2020 Toyota Tacoma will your blocked milk fit my racks
Answer:	Should be fine. I have it on a 03 silverado. Its made for all full size trucks
Question:	Is this part compatible with standard mountain bike mtb forks? trek and specialized for example? or just road bikes
Answer:	Yes, as far as wiping it down after use but not if you mean machine washing.

Product description

The Blockhead Bike Mount is a gift to anyone rider with a flatbed truck or trailer. All it takes is two bolts and you've got yourself a place to install this handy fork style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys.

• A "bolt anywhere" fork style bike mount
• Fits bikes with 9mm x 100mm front hubs
• Locking single-sided adjustment skewer with long throw for easy bike loading; SKS Lock Core included
• Corrosion-resistant anodized aluminum construction
• Love it 'Till You Leave It Limited Lifetime Warranty

User questions & answers

Question:	I have a Toyota Tacoma which has the cargo management rails, do these include that hardware to mount inside the rails
Answer:	No They don't mount to the rails. I was lucky enough to have extra rail brackets from a Trac Rac Rack system I had that I used.
Question:	Does this work with through axles
Answer:	You would need to add a through axle adapter in order to use this with your through axle bike.
Question:	Can i get the lock with an specific key? Like an A169 type of key
Answer:	Unfortunately getting a specific key is not an option for this product but you can buy different locking cores that all have the same key depending on how many you need.
Question:	Do you bolt into the truck bed? Will the mess up the bed and cause rust
Answer:	What I did, was cut a 2x4 to the width of my Ford F150 bed, there are indents in the side that let the 2x4 slide in. I then bolted the BlockHeads into the 2x4 (I did two) and it worked perfectly. Two bikes in the bed with all sorts of gear also in the bed. The best part, is when the fun was over I could store the 2x4 for the next trip and use my whole truck bed as I normally would. This doesn't compromise the bed, and nothing rusts. Hope this helps.

Product description

The Thule Low Rider can be mounted to practically any flat surface, offering you one of the most versatile solutions for bike transportation. The Low Rider is made of heavy duty metal and features a 9mm quick-release fork mount that holds your bike securely in place. The Low Rider mounts quickly and easily to any flat surface that you can drill four holes in.

• Permanently mounting bike rack fork mount plate for flat surfaces including pickup truckbeds, RV's and campers, boats, trailers etc.
• High-quality, corrosion-resistant heavy duty metal construction
• 9mm quick-release fork mount skewer holds fork in place for stable and secure bicycle transport
• Compatible with all disc-brake / suspension combinations with standard 9mm axles
• Limited lifetime warranty

User questions & answers

Question:	What’s the best way to install this securely in a truck bed
Answer:	There is no nailer in this package.
Question:	Will this work with a through axle
Answer:	The nailer that comes in the kit will shoot 5/8"-2", 18 gauge brad nails & 5/8"-1.625" 18 gauge 1/4" crown staples.
Question:	Is this mount sturdy enough to serve as a front fork mount for a bicycle trainer? I'd mount it on a block and use it to support front of bike
Answer:	It can operate spray guns that spray latex as long as the gun requires less than 5 CFM at 40 PSI
Question:	If my suv truck roof will not permit my installling this, can i retun it and get a refund it it it unused and still in the package
Answer:	The amp draw is 14 amps running. It is large enough to operate a spray gun as long as the CFM requirement of the gun does not exceed the amount of CFM this compressor can produce. You can use a 100 foot hose but you will loose pressure and CFM . So make sure that the CFM requirement of the gun is less than the compressor delivers and increase the air flow about 5 PSI for every 25' of airline

Product features

Thule Low Rider

Permanently mounting bike rack fork mount plate for flat surfaces including pickup truckbeds, RV's and campers, boats, trailers etc. Heavy-duty metal construction holds bike securely when mounted to any flat surface

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

• EASY TO ASSEMBLE: The PICKUP has a telescoping bar ensures quick and easy no-drilling installation and adjusts to fit many truck bed sizes. The rubber end pads help to grip your bed rails and prevent scratches and abrasions
• WORRY FREE SECURITY: Bikes are secured on the fork mount blocks. These blocks include 9mm Quick Release skewers that anchor and secure your bikes to the rack.
• VERSATILE: Transport up to 2 bikes. Maximum weight capacity of 35Ibs. per bike. The fork blocks can be repositioned along the main bar to ensure that your bikes are spaced properly
• STURDY: Made of solid stainless steel that will last for a long time, investing in a Swagman PICKUP Fork Mount Rack is a no brainer

User questions & answers

Question:	will it fit properly on my 2015 Chevy Colorado
Answer:	Definitely
Question:	Will this fit a 2020 Tacoma
Answer:	Try sticking in the key and rotating it to a different position (turn it to the right or left), then take out the key and push the button. Mine works fine
Question:	Push button lock question...am I missing something? With everything sized and in place, silver button does not push in to lock unit. Help, thanks
Answer:	Yes. Probably too late for you but I installed it on a 2013 Honda Ridgeline and it works perfectly. I actually have a hard cover for my bed and the bikes sit on top and have traveled at highway speeds no problem. Just don't forget to take your bike off before you pull into the garage :-( I think the dimensions are the same.
Question:	Has anyone installed this on a 2017/2018 Honda Ridgeline
Answer:	My guess is yes. The weight of the fork on the mount does not exert a lot of weight/torque. I would definitly use washers behind the mounting surface to create more surface area and a more stable mount.
Question:	I have a Ford Ranger,bed is single wall constructed.Bed strong enough to install
Answer:	The mounting holes are straight cut through so you will need a panhead or normal bolt.
Question:	Are th mounting holes tappered or straight through
Answer:	If the disc brakes don’t come off with the wheel it might not work
Question:	Does this work with a bike with a Thru-Axle and Disc brakes
Answer:	Hey, this is for a 9x100mm Quick release fork.
Question:	what is the dimension of the fork spread on these
Answer:	I have three across mounted on a 2x8 in the back of the bed of an F150 pickup which works pretty well. I would suggest you set the bikes you plan to use side by side and see what spacing is required. You might be able to do five if you used two boards offset from each other to give room for the handlebars, or at opposite ends of the bed with bikes in opposing directions.
Question:	How far apart should these be from each other? I have about 5 feet of space and would like to fit as many as I can
Answer:	It should work fine. I put 6 of them on a DIY bike rack for my popup camper. I put 2 adult and 4 kids bikes on them. Several of the bikes were bolts, not quick release.
Question:	Would this work with beach-cruiser type bikes? (Yes, they don't have the quick-release front wheels, but after unbolting
Answer:	One end has the quick release lever, the other has a knob you turn to adjust the tension on the skewer.First you release the lever, then turn the adjusting knob to loosen it so you can remove the fork. Easy peasy
Question:	How does the quick release work? Am i missing something or is the unscrewing the quick release? I feel like I am missing something about the lever
Answer:	This may work better. https://www.amazon.com/Kuat-Racks-Dirtbag-Thru-Axle/dp/B01M9G4G7G/ref=pd_sbs_468_6?_encoding=UTF8&pd_rd_i=B01M9G4G7G&pd_rd_r=V8MRST13B4T52EX9STCE&pd_rd_w=yy0am&pd_rd_wg=PQ4Aj&refRID=V8MRST13B4T52EX9STCE
Question:	Will it work with thru axel
Answer:	9 1/2 inches is all I would trust comfortably on this. My 9" tablet fits perfectly with a little room to adjust.

Product features

Our Story

The term originates from Australia and describes someone who travelled by foot from farm to farm seeking work and carrying his belongings in a swag. This is the image our founders had in mind when they started Swagman almost 30 years ago. But they were in search of adventures and their swag included bikes, kayak or anything they could use to explore the nature surrounding them in beautiful British-Columbia, Canada.

About Swagman

Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous ground breaking designs in the North American Bicycle, RV and Automobile markets.

Nowadays, we have grown but still dream of adventures, your adventures. How can we help you travel, explore and discover the beautiful nature our world has to offer? This is what drives us to design innovative product. Knowing our products are part of your journey is what keeps us going.

Find the perfect rack for your ride!