13 best rear bumper protectors

Product description

Advgears Rear Bumper Protector Universal Black Guard



About the product:

- High grade anti-scrape rubber with matt surface, is soft and strong.

- Cover existing scratches and prevents your car from wear and tear, scratches paint scratches and so on.

- Decorate car appearances, make your car particular and unique



Method of installation:

1. Find the correct install position, before removing the tape protective film on the products.

2. Clean surface of Installation position to ensure that it`s clean and no oil, grease and wax and so on.

3. Pace the item on the exact position carefully,Paste the trim,press it to ensure good adhesion. Repeated pressure for stronger adhesion.

4. Please do not wash your car within 24 hours,so it can be good bond strength.

5. Please heat the adhesive tape under the item to Increase the stickiness if you have hot hair dryer. (affected by temperature)



Include:

1X rear guard bumper

1X tape



About Advgears:

Advgears store highly appreciates all customers' opinions to improve the selling, also if anything you unsatisfied, please contact our customer service department for probable best solution.Scroll up & click add to cart now!

• Great Material: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation.
• Multi-Function: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage.
• Unique Design: ANTI-SLIP DESIGN of this rubber guards, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put.
• Light Weight: This scratch-resistant rubber bumper guard is very durable,flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install.
• Satisfaction Guaranteed: Your purchase is fully protected when you order this rubber bumper protector today. If you have any problem, we will solve it within 24 hours.

User questions & answers

Question:	Will fit subaru 2019 crosstrek
Answer:	I got gorilla glue brand tape from Lowe’s. Worked perfect.
Question:	Does it fit a 2015 Honda accord
Answer:	My daughter is currently using my Mitsubishi lancer which is the vehicle that I installed the sun. It covers the width of the trunk with about 2 inches on each side. All you do is Center it in the center of the bumper if it’s not quite long enough or you can just simply cut it. I’ve had it on the back of that car now for well over a year and it’s worked out really great.
Question:	There was almost no tape. What specs are spe so i may order more
Answer:	I don’t know I have a 2018 Jeep and it is pretty big you cut it down to fit in the back of your vehicle . I m happy with mine....
Question:	What is the dimension when layed flat
Answer:	Yes most likely

Product description

Patented, durable, and long-lasting rubber design. Fits most sedan vehicles. Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Mildew and stain resistant - loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry. High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations. Strong security straps - Help Deter Theft - Ultra Heavy Duty. Protects the rear bumper from low-speed impacts from parallel parking thereby preventing scratches. Conforms to the vehicle's unique contours and blends with its shape and does not detract from its stylish appearance. WARNING: Intended to be used on parked vehicles ONLY! Never drive with the Bumper Butler attached.

• WARNING: Intended to be used on parked vehicles ONLY! Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
• Dimensions: 43 X 11 inches
• Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use
• Patented, durable, and long-lasting rubber design; Fits most sedan vehicles
• High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations

User questions & answers

Question:	Do these rugs serve the trunk of a Mitsubishi Lancer
Answer:	It’s 55x31.5”. This nat can be cut to fit ur cargo area if it’s too big. Just follow along the lines.
Question:	does this fit on a Toyota Sienna
Answer:	I have a honda accord and I think it’s covers it pretty well.
Question:	Can anyone tell me dimensions of the inner outlined section of mat
Answer:	Yes it will
Question:	Will it fit 2019 Lexus 350 rx
Answer:	Yes, this will fit a 2015 Nissan Altima.

Product features

Premium Seat Covers, Auto Accessories and More

At FH Group we offer a wide variety of automotive products designed to make your life easier and more enjoyable.

Protect Your Vehicle's Bumper in City and Urban Parking

Protects the rear bumper from low-speed impacts from parallel parking thereby preventing scratches. Measures 43" X 11" inches for superior protection

Simple Installation

Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Never drive with BumperButler attached intended for parked vehicles only!

Safety Reflectors for Increased Visibility

High-Intensity Safety Reflectors make the BumperButler stand out to vehicles parking behind you.

Durable Lasting Rubber Design for most Sedans and SUVs

Patented, durable, and long-lasting rubber design. Strong security straps - Help Deter Theft - Ultra Heavy Duty.

About Us

FH Group International, Inc. is a manufacturer you can depend on and trust. Our mission is to exceed your expectations by providing a large selection of outstanding car accessories at affordable prices. We are constantly striving to provide our customers with the most efficient and friendly communications, smooth transactions, and speedy deliveries.

At FH Group International, Inc., we offer a variety of car accessories such as high quality seat covers and car covers for most makes and models on the market, protective floor mats, genuine leather steering wheel covers, and much, much more.

• Added protection against scuffs, nicks, scratches, and other damaging marks
• Textured surface provides slip resistance
• Quick and easy no-drill installation with the use of self-adhering 3M Tape
• Attaches directly to your rear bumper
• To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle

User questions & answers

Question:	Will it fit 2015 Kia Sorento
Answer:	Hello, our technicians checked for a fitment for the 2015 Sorento. We have determined that part# RBP-004 is a good fit for the 2015 Sorento. Here's the link: https://www.amazon.com/Dawn-Enterprises-RBP-004-Bumper-Protector/dp/B01N812T74/ref=sr_1_2?ie=UTF8&qid=1505926034&sr=8-2&keywords=rbp-004 Thank you, SPORTWING
Question:	does it fit a 2017 highlander
Answer:	I placed it on my 2017 Highlander. It looks just fine. Beats the $160+ chrome they want to install at the dealership. I wanted rubber for the sake of my dogs.
Question:	Does this part fit a 2014 ford edge
Answer:	Sorry, this doesn't fit the 2014 Ford Edge. Please visit this link for the bumper cover protector that does. https://www.amazon.com/Dawn-Enterprises-RBP-001-Bumper-Protector/dp/B01NA0KYFB/ref=sr_1_1?ie=UTF8&qid=1502288728&sr=8-1&keywords=RBP-001
Question:	Well this work with a power lift gate ? on a mazda cx
Answer:	Sorry, this will not work with the power lift gate feature. SPORTWING

Product features

Textured Surface

Rear Bumper Protectors feature a thick, textured, and non-slip surface. The stylish, textured surface design allows you to feel safe when setting something onto the bumper of your vehicle without fear of it falling off. Knowing your shoes are gripped to our RBP, you will feel safe stepping onto your bumper, rain or shine.

Easy Installation

Installing a Rear Bumper Protector to your vehicle is a breeze. Clean the surface of your bumper, peel the pre-applied 3M Tape, and stick the RBP on. Every vehicle is different, and some applications may require the RBP to be bent to match the exact curvature of your vehicle. A set of easy-to-follow installation instructions are included with your order.

Protective Barrier Against Damage

Drop a tool? No problem. Pet paws scratching your bumper? No problem. Manufactured using high quality polyurethane, Rear Bumper Protectors provide a layer of defense against damage. Without a RBP, you leave your bumper vulnerable and at risk of receiving scratches, chips, and scuffs. If your bumper already has a few unsightly marks, this RBP is capable of effectively covering up the damage.

Vehicle Fitment Checked!

Our installation staff has factory fitted this Rear Bumper Protector for proper fitment onto specific vehicles, ensuring it will perfectly fit the shape of your bumper.

STEP 1: Clean Bumper

Clean the surface of your bumper with a clean cloth. Then, using the alcohol wipe provided, wipe down the bumper until clean. Let any excess residue dry prior to installation.

PLEASE NOTE: Your vehicle should be at least 75°F for proper installation.

STEP 2: Line Up Arrow With Trunk Latch

To place your bumper protector properly, start by lining up the arrow on the bumper cover with the trunk latch located within the trunk of your vehicle.

PLEASE NOTE: Do not remove tape yet.

STEP 3: Dry Fit

After centering the bumper protector, carefully bend the sides along the curvature of your vehicle's bumper. This step is to ensure that you are happy with the placement before fully installing the bumper protector.

STEP 4: Remove 3M Tape

Remove all tape lining from the underside of the bumper protector. Do not touch tape or place onto a surface other than your bumper.

STEP 5: Place Center Down

Carefully place the center of your bumper protector down. Once again, you will line up the arrow on the bumper protector with the trunk latch. You will want to keep the bumper protector as close to the edge of your bumper as possible.

STEP 6: Bend To Match Bumper Curvature

Placing one side at a time, carefully guide the bumper protector along the curvature of your bumper.

PLEASE NOTE: Do not press down until you are completely happy with fitment. This allows you to pull bumper cover back up if a mistake has been made.

STEP 7: Press Down Firmly

Using a clean cloth, firmly press down on bumper protector.

STEP 8: Finished

You're done! Please allow up to 24 hours before washing your vehicle or traveling through inclement weather.

This Rear Bumper Protector Is Compatible With The Following Vehicles

Audi -- Q5 <2009-2017> || SQ5 <2009-2017>

Ford -- Edge (Excludes Models With Power Liftgate) <2015-2018> || Explorer (Excludes Models With Power Liftgate) <2011-2018>

Mazda -- CX-5 (Excludes Models With Power Liftgate) <2013-2021>

Nissan -- Pathfinder <2013-2016>

Toyota -- Highlander <2014-2019>

Volkswagen -- Atlas (Excludes Cross Sport) <2018-2021> || Tiguan <2018-2021>

Volvo -- XC60 <2018-2021>

Product description

NEW for 2015 the BumpShox XL features a blacked out logo for a stealth appearance and a new military tough surface texture. The BumpShix XL is our biggest and thickest front bumper guard measuring 14 inches wide and 2.25 inches thick, it is noticeably wider and taller than a standard license plate frame. The ornate arches and sharp angles enhance the look of your front bumper, while providing maximum protection from low impact parking bumps.



The BumpShox XL is a replacement license plate frame that doubles as a car bumper protector. It is designed to compliment the sculpted lines of your vehicle while offering bumper protection 24 hours a day, 7 days a week - no need to remove the bumper guard.



To attach the BumpShox XL bumper guard, simply remove the old license plate frame from the vehicle and use the existing (or included) screws to attach.



*** PRODUCT DIMENSIONS ***

14" EXTRA WIDE

8.5" TALL (Total Height With FlexFin)

2.25" THICK





*** SCREWS ARE INCLUDED ***

We include 4 screws, size # 14 x 3/4 inches long with your BumpShox. However, most standard license plate screws will work if you want to use your current screws. The BumpShox may be attached and used with 2 or 4 screws.



Please note that the standard distance between the license mounting holes is 7 inches - center to center. This is standard license plate spacing in the United States, however due to dealership handling, there may be some exceptions. Please measure the distance between mounting holes before ordering.



Note: BumpShox Will Not Work With Some Volvo vehicles because the screws on certain Volvo license plate brackets are integrated directly into the frame and can not be removed.



*** BumpShox is Intended For Use on the Front Bumper Only! It Will Not Fit the Rear Bumper Because the Flex-Fin is too tall ***

• At 14" EXTRA WIDE x 8.5" HEIGHT X 2.25" THICK - BumpShox XL is Designed To Be Taller and Wider Than a Standard License Plate Frame
• TOUGHER THAN STEEL – V-Tech All Weather Foam ** Will NOT Crack or Rust Like Metal or Plastic License Plate Frames **
• RECESSED SCREW DESIGN - No Protruding Metal Parts That Can Damage Another Vehicle's Bumper
• PYRAMID DESIGN - Steep Angles Gives the BumpShox A Sleek Appearance, Increases Product Flexibility and Maximizes Shock Absorption
• FLEX-FIN EXTENDER – This Patent Pending Feature Provides Additional Coverage to Protect the Front Bumper From Dents and Scratches When a Taller Vehicles Backs Into Your Vehicle

User questions & answers

Question:	Is this fit my 2015 infnity Q
Answer:	Hello john... Indeed! U can still mount the bumber shox I too only used two screw holes for my 2008 mustang still durable holds great!
Question:	What is the screw length for a 2016 Subaru Forester? The #14 x 3/4" are too short between recessed hole and front bumper
Answer:	The bumper guard will fit all cars. License plates come in one size and so does the bumper guard. The bumper guard comes in different sizes so it's on the consumer to choice the level of protection he/she would like.
Question:	Toyota Solara looks like it only has two screw holes because of the round nose. Can I still use it
Answer:	Yes
Question:	Will this fit a 2014 Honda CRV
Answer:	Probably will, honestly I wasn't a fan of it when I got it. Didn't like the clips that fit under the wheel well. I would look into something else.

Product description

T-Rex rear bumper protector is a lightweight high quality bumper guard made of high density durable and all weather foam material that will absorb the impact of the car bumping into your vehicle as he is trying to park. Fits most cars with the 31" Straps that is extended from either side of the Bumper Guard. Includes Velcro, to use if the straps don't fit.

• Universal fit: this bumper guard fits any car small and large
• Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings dents and scratches when you park the car
• Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in a breath
• 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners
• Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps

User questions & answers

Question:	need extra straps to my T-rex bumper guard
Answer:	Yes it is possible the only thing is that you might have to cut the bumper cause it might cover the license plate in the front
Question:	Does it fit on 2018 VW Jetta
Answer:	Yes, this bumper will stop the sensors from working....it happened to my daughters car...
Question:	Could one possibly buy 2 and place one on the rear bumper and one on the front of the car
Answer:	Thanks for contacting us with your question. Yes, the BumperBully GOLD EDITION should fit the Mercedes SL600 well. Another option you might want to consider is the ParkingArmor 4.8 Edition as its 48 inches wide and approx. 2 inches thick. If you have any issues please contact for assistance. Thanks, EuroBumperGuard Customer Service Dept.
Question:	does the wrap on the bumper prevent the sensor from working
Answer:	Thanks for contacting us with your question. Yes, the BumperBully GOLD EDITION should fit the Hyundai Elantra well. If you have any additional questions or concerns please contact us for assistance.

Product features

T-Rex Bumper Protector

T-Rex Bumper Protector absorbs the impact of a car bumping into your vehicle as he is trying to park.

In some cities, it's extremely difficult to find a parking. Sometimes, as a last resort, drivers have to make do with a really tight gap.

The T-Rex Bumper Protector guards your rear bumper from other drivers struggling to fit their vehicles into a difficult spot.

Or from newbies practicing their parallel parking skills.

The T-Rex Bumper Protector works effectively.

And it looks good.

Universal bumper protection

• Universal fit: this bumper guard fits any car small and large
• Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings, dents and scratches when you park the car
• Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in 2 minutes or less
• 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners
• Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps
• Works the same with or without the side straps

Step 1: Center over bumper

Center the Bumper Protector over the rear bumper.

Adjust the height.

Attach the top straps to the carpet inside the trunk with the Velcro ends.

Your trunk should close as usual.

Step 2: Attach side straps

Attach the side nylon strap hooks around the sides of your bumper.

Make sure the foam pads come into the hooks to prevent scratching.

Step 3: Adjust side straps

Tighten the nylon straps as needed to produce a tight fit.

When done correctly, the straps will hold the bumper protector securely.

Step 4: Enjoy!

Installation complete!

Enjoy the peace of mind offered by the Bumper Protector.

Share your experience.

Step 1: Center over bumper

Follow Step 1 in the installation above.

For a minimalist look, remove the side straps.

Stick the Velcro surface to each ends with the adhesive side facing your bumper.

Step 2: Clean the bumper

Clean the side of the bumper with the supplied alcohol swab.

Dirt can prevent the Velcro sticker to adhere to the bumper's surface.

So be thorough.

Step 3: Stick Velcro pads

Peel off the sticker.

Attach the edges of the Bumper Protector to the side of the bumper you just cleaned.

Repeat for the other end.

Step 4: Installation complete

Enjoy your Bumper Protector!

Share your experience.

• HIGH-QUALITY MATERIALS: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation.
• ELEGANT DESIGN: ANTI-SLIP DESIGN of this rear bumper protector, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put.
• ♡MULTIFUNCTION♡: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage.The fashionable appearance can not only make your car look cool, but also protect your car.
• EASY INSTALLATION:This scratch-resistant rubber rear bumper protector is very durable,flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install.
• COMPATIBILITY: 35.8inch*3.15inch ,the Goodream rear bumper protector fit for all cars with rear guard.(If the case of damage or other reasons,please E-mail contact us, we will respond within 24 hours can do for you and arrange. Thank you)

Product features

Goodream Rear Bumper Protector

NOT JUST A RUBBER: Our rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation.

Universal fits for most cars/ SUVS

size: 90 cm (35.8 inches) * 7.8 cm (3 inches) * 0.3 cm (0.12 inches)

Material:Rubber

Color:Black

Feature:

100% new and high quality.

Made of high quality rubber.

Easy to install.

Protect your car from scratching and decorative.

Installation Instruction:Clean the car surface, keep it dry, product with 3M tape Easily Installtion No Drilling No Damage.

Tips on car protection

• At some point, you take something out of the trunk and it leaves a mark on the body. More likely, if you regularly carry bulky and awkward items, such as baby strollers, groceries, DIY gear, golf clubs, or even an energetic dog, in the back. Wear and scratches can be annoying, and we all know that it can be expensive to pay someone to fix or repaint the paint. They may even affect the resale value of your car.
• With Goodream's rear bumper protector, your car will be fully protected from wear and tear and will have an upgraded look. So it's an ideal accessory for people who care about keeping their cars in top condition. Of course, if the area around your rear bumper already looks badly worn, installing our bumper protector will do a great job of covering up any damage.

Easy Installation Steps:

1. Clean the surface to ensure that it`s clean and no oil, grease and wax and so on.
2. Groovy surface on top, place the sill guard onto the surface (without tape) and adjust to fit the correct position (use non-permanent marker and ruler to help positioning).
3. Mark the position and then remove to sill guard for 3M tape.Unspool the 3M tape and stick it on the opposite side of the groovy surface. Use scissors to cut the tape and repeat the step until four edges + the center of the guard is covered by tape.
4. Now, stick the sill guard onto the marked position and gently press all around the guard to ensure good adhesion.

Don`t wash your car or get wet for at least 24 hours.

• Added protection against scuffs, nicks, scratches, and other damaging marks
• Textured surface provides slip resistance
• Quick and easy no-drill installation with the use of self-adhering 3M Tape
• Attaches directly to your rear bumper
• To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle

User questions & answers

Question:	Does this fit a 2018 Camry
Answer:	This fits my 2019 Chrysler Pacifica. I don't know whether it would fit a 2018 Camry.
Question:	Will it fit 2021 pacifica
Answer:	Hello, Yes, this rear bumper protector fits the 2021 Chrysler Pacifica. Thank you, Sportwing
Question:	I bought it and installed it and now see that it is a bit crooked. Can I re install it
Answer:	Hello, We would not recommend re-installing it. If you do decide to reinstall, please be sure to remove all the tape residue and purchase 3m automotive grade tape for the install. SPORTWING
Question:	Does this fit the 2019 Pacifica
Answer:	Hello, Yes, this fits the 2019 Pacifica. Thank you! SPORTWING

Product features

Textured Surface

Rear Bumper Protectors feature a thick, textured, and non-slip surface. The stylish, textured surface design allows you to feel safe when setting something onto the bumper of your vehicle without fear of it falling off. Knowing your shoes are gripped to our RBP, you will feel safe stepping onto your bumper, rain or shine.

Easy Installation

Installing a Rear Bumper Protector to your vehicle is a breeze. Clean the surface of your bumper, peel the pre-applied 3M Tape, and stick the RBP on. Every vehicle is different, and some applications may require the RBP to be bent to match the exact curvature of your vehicle. A set of easy-to-follow installation instructions are included with your order.

Protective Barrier Against Damage

Drop a tool? No problem. Pet paws scratching your bumper? No problem. Manufactured using high quality polyurethane, Rear Bumper Protectors provide a layer of defense against damage. Without a RBP, you leave your bumper vulnerable and at risk of receiving scratches, chips, and scuffs. If your bumper already has a few unsightly marks, this RBP is capable of effectively covering up the damage.

Vehicle Fitment Checked!

Our installation staff has factory fitted this Rear Bumper Protector for proper fitment onto specific vehicles, ensuring it will perfectly fit the shape of your bumper.

STEP 1: Clean Bumper

Clean the surface of your bumper with a clean cloth. Then, using the alcohol wipe provided, wipe down the bumper until clean. Let any excess residue dry prior to installation.

PLEASE NOTE: Your vehicle should be at least 75°F for proper installation.

STEP 2: Line Up Arrow With Trunk Latch

To place your bumper protector properly, start by lining up the arrow on the bumper cover with the trunk latch located within the trunk of your vehicle.

PLEASE NOTE: Do not remove tape yet.

STEP 3: Dry Fit

After centering the bumper protector, carefully bend the sides along the curvature of your vehicle's bumper. This step is to ensure that you are happy with the placement before fully installing the bumper protector.

STEP 4: Remove 3M Tape

Remove all tape lining from the underside of the bumper protector. Do not touch tape or place onto a surface other than your bumper.

STEP 5: Place Center Down

Carefully place the center of your bumper protector down. Once again, you will line up the arrow on the bumper protector with the trunk latch. You will want to keep the bumper protector as close to the edge of your bumper as possible.

STEP 6: Bend To Match Bumper Curvature

Placing one side at a time, carefully guide the bumper protector along the curvature of your bumper.

PLEASE NOTE: Do not press down until you are completely happy with fitment. This allows you to pull bumper cover back up if a mistake has been made.

STEP 7: Press Down Firmly

Using a clean cloth, firmly press down on bumper protector.

STEP 8: Finished

You're done! Please allow up to 24 hours before washing your vehicle or traveling through inclement weather.

This Rear Bumper Protector Is Compatible With The Following Vehicles

Chrysler -- Pacifica <2017-2021> || Voyager <2020-2022>

Product description

The Black Edition is the entry-level BumperBully model and comes standard with patented stabilizer bars (black color). The black on black design with a white logo gives the BumperBully Black Edition a stealth look and more subdued appearance. Please note the Black Edition BumperBully does NOT have steel reinforced straps or safety reflectors.



The BumperBully brand is #1 in bumper protection! The BumperBully is the only rear bumper guard made from a premium grade, soft, elastic rubber material, not PVC Plastic like many competing products.



The patented stabilizer bars enable the product to remain firmly in place on your bumper to offer maximum protection. The stabilizer bars add stability to the top of the BumperBully, preventing the corners from folding back and leaving your bumper exposed.



The Bumper Bully offers an extra wide bumper protector surface 46"x12”, which means it covers more of your car bumper. The best feature of the BumperBully car bumper guard is its unique shape and design; crafted to complement the graceful lines of all makes and models. The wider top portion gives maximum protection, while the lower portion tapers inward to ensure the product (if installed properly) will not block the exhaust pipes (you should never block vehicle exhaust pipes). No other bumper protector gives you all these benefits.



WARNING: Intended to be used on parked vehicles ONLY! Never drive with the BumperBully attached.

• Bumper Bully Is The #1 Rated Rear Bumper Protector
• SUPER WIDE Bumper Protection Area measuring 46" x 12" - The Largest Bumper Protector
• Patented Stabilizer Bars (Black Color)
• Water Proof Trunk Straps (Not Steel Reinforced)
• PREMIUM Grade Rubber Material (PVC FREE)

User questions & answers

Question:	Will this fit a infinity g35x
Answer:	It will probably cover the sensors. I don't own it but someone in the reviews had the same issue.
Question:	Will this fit a bmw 528i
Answer:	Thanks for contacting us with your question. Yes, the BumperBully BLACK EDITION should fit the BMW X3 well. If you have any additional questions or concerns please contact us for assistance.
Question:	Will it effect the back up sensors on the bumper when placed over it
Answer:	Pretty thick but still Bendable and easy to apply.
Question:	Does it fit a 2019 bmw x
Answer:	Hi, it is universal fit for car bumpers, and the width is 2.9inch, you could check about it, thanks.

• ✔#1 AMAZON'S CHOICE. Buy with confidence!
• ✔ULTIMATE PROTECTION - Our bumper protector / bumper guard will protect your bumpers from expensive scratches, dents, and dings at an affordable price! Avoid anything less that will lead to expensive body repairs. We know the feeling.
• ✔ALL WEATHER - Made out of STRONG all weather foam material for use in rain, snow, or sunshine!
• ✔UNIVERSAL - Fully adjustable straps to fit most Cars and SUVs on the road! All brands A-Z are 99% compatible with our bumper guard!
• ✔WIDER IS BETTER - BumperSafe measures 72" wide protecting your bumper from corner to corner. Other products forget about the corners and only protect the middle of your bumper leaving the rest exposed to potential damages. Don't let this happen to you!

User questions & answers

Question:	Will this fit a 2011 Ford Fiesta
Answer:	Yes, this will fit a 2015 Audi A4. Thank you for your interest in BumperSafe.
Question:	Would this fit a 2015 Nissan Altima
Answer:	Es ajustable a cualquier medida de automóvil
Question:	will this fit a 2015 audi a
Answer:	It fits my Smittybilt X2O 12000 perfectly, I'd suggest comparing the size of your winch to the smittybilt to see.
Question:	Porque no lo van a vender más
Answer:	Mine is very secure sitting recessed on a 10,000 lb Warn winch mounted on a Warn Elite bumper. It is so tight it can’t blow off. I saw someone with a bungee cord with a similar cover mounted high. The warranty is not going to cover loss. Cover was tight and difficult to get on at first but now works great.

Product features

BumperSafe

BumperSafe is the ultimate bumper protector for your cars bumper. Do you parallel park anywhere? Then you need BumperSafe to take the worry out of leaving your car unattended and having your bumpers scratched, dinged, or chipped. Body repair can get expensive and here at BumperSafe we understand the frustration. We made BumperSafe from the ground up to ensure that we covered every base of protection on your cars bumper. BumperSafe is the solution to keeping your cars bumper in good shape for years on end! Trust in BumperSafe and keep your nice bumpers looking like new!

Adjustable

• Strong metal hook covered with a rubber coating to prevent scratches to the paint at the end of each strap.
• Extra long at 30"(inches) to fit 99% of vehicles.
• All weather coating to use rain, snow, or shine.

Fully Customizable

When we say Universal, we mean it! Our bumper guard is compatible with 99% of all Cars and SUVs (A-Z) on the road. Order with confidence knowing this will fit your vehicle hassle free.

• Customizable size to fit any vehicle, small or large.
• Laser etched lines serve as a guide to cut and shorten the bumper guard by up to 8 inches for smaller vehicles.

***Each line equals to approximately 1 inch of material.***

Secure

• Extra long velcro at the end of each strap for a secure fit.
• Strong adhesive backed velcro strips will stick to multiple surfaces in the trunk.

• Added protection against scuffs, nicks, scratches, and other damaging marks
• Textured surface provides slip resistance
• Quick and easy no-drill installation with the use of self-adhering 3M Tape
• Attaches directly to your rear bumper
• To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle

User questions & answers

Question:	Just to make sure, does it fit lincoln mkx? and is it heat resistant because i live in a very hot region? thanks
Answer:	Hello! This fits the 2007-2015 Lincoln MKX. The Rear Bumper Protectors are in fact heat-resistant, and this would be covered under the Manufacturer Warranty, should you ever experience any issues pertaining to heat. Thank you, SPORTWING
Question:	How about a 2013 ford edge? the amazon app tells me it doesn’t fit that vehicle even though the description says it does
Answer:	Hello, This fits the 2007-2014 Ford Edge. Thank you, SPORTWING
Question:	nissan pathfinder. It’s 35”in long or longer
Answer:	The description says it's 48" long, but I didn't measure mine. All I know is that it fits my 2019 Nissan Pathfinder exactly like the picture shows and it fits perfectly, just like a factory installation. I'm VERY pleased with it!
Question:	nissan pathfinder sv, please confirm it will fit? you have buyers here that say it won’t.... amzn says it will.....?? thx
Answer:	Hello, RBP-012 does NOT fit the 2015 Pathfinder. It fits the 2017-2019 Pathfinder. RBP-005 fits the 2013-2016 Pathfinder. Here's the link: https://www.amazon.com/dp/B076X4CYXY/ref=twister_B076X59PJN?_encoding=UTF8&psc=1 Thank you, SPORTWING

Product features

Textured Surface

Rear Bumper Protectors feature a thick, textured, and non-slip surface. The stylish, textured surface design allows you to feel safe when setting something onto the bumper of your vehicle without fear of it falling off. Knowing your shoes are gripped to our RBP, you will feel safe stepping onto your bumper, rain or shine.

Easy Installation

Installing a Rear Bumper Protector to your vehicle is a breeze. Clean the surface of your bumper, peel the pre-applied 3M Tape, and stick the RBP on. Every vehicle is different, and some applications may require the RBP to be bent to match the exact curvature of your vehicle. A set of easy-to-follow installation instructions are included with your order.

Protective Barrier Against Damage

Drop a tool? No problem. Pet paws scratching your bumper? No problem. Manufactured using high quality polyurethane, Rear Bumper Protectors provide a layer of defense against damage. Without a RBP, you leave your bumper vulnerable and at risk of receiving scratches, chips, and scuffs. If your bumper already has a few unsightly marks, this RBP is capable of effectively covering up the damage.

Vehicle Fitment Checked!

Our installation staff has factory fitted this Rear Bumper Protector for proper fitment onto specific vehicles, ensuring it will perfectly fit the shape of your bumper.

STEP 1: Clean Bumper

Clean the surface of your bumper with a clean cloth. Then, using the alcohol wipe provided, wipe down the bumper until clean. Let any excess residue dry prior to installation.

PLEASE NOTE: Your vehicle should be at least 75°F for proper installation.

STEP 2: Line Up Arrow With Trunk Latch

To place your bumper protector properly, start by lining up the arrow on the bumper cover with the trunk latch located within the trunk of your vehicle.

PLEASE NOTE: Do not remove tape yet.

STEP 3: Dry Fit

After centering the bumper protector, carefully bend the sides along the curvature of your vehicle's bumper. This step is to ensure that you are happy with the placement before fully installing the bumper protector.

STEP 4: Remove 3M Tape

Remove all tape lining from the underside of the bumper protector. Do not touch tape or place onto a surface other than your bumper.

STEP 5: Place Center Down

Carefully place the center of your bumper protector down. Once again, you will line up the arrow on the bumper protector with the trunk latch. You will want to keep the bumper protector as close to the edge of your bumper as possible.

STEP 6: Bend To Match Bumper Curvature

Placing one side at a time, carefully guide the bumper protector along the curvature of your bumper.

PLEASE NOTE: Do not press down until you are completely happy with fitment. This allows you to pull bumper cover back up if a mistake has been made.

STEP 7: Press Down Firmly

Using a clean cloth, firmly press down on bumper protector.

STEP 8: Finished

You're done! Please allow up to 24 hours before washing your vehicle or traveling through inclement weather.

This Rear Bumper Protector Is Compatible With The Following Vehicles

Ford -- Edge <2007-2014>

Lincoln -- MKX <2007-2015>

Nissan -- Pathfinder <2017-2021>

Subaru -- Forester <2009-2021>

• 【35 Inches Fit Most Cars】Length 35 inch, width: 2.9 inch, black. Universal fit for most of the trucks, pickups or suvs.
• 【High Quality Materials】This bumper guard protector is made of high quality material, durable,flexible, and bendable, will not crack or break. Groove design and non SLIP function, effectively prevent the falling of things that you put.
• 【Great Performance】Scratch resistant, abrasion resistance, anti-aging. Protect your car rear bumper when loading or unloading luggages, groceries, tools box and so on, it prevents nasty scratches and provides protection.
• 【Easy To Install and Remove】Back glue stick on the product, on the installation position can be installed off.
• 【Package includes】Comes with glue tape, easy for you to install without other tools. And pls ensure the surface is clean and no oil, water and dirty before gluing the tape.

User questions & answers

Question:	Will the 35” or even the 38” fit a 2020 Mazda CX-5 without interfering with the lift gate sensor
Answer:	Hi, it is universal fit for car bumpers, and the width is 2.9inch, you could check about it, thanks.
Question:	will it fit 2017 acura mdx
Answer:	It should but you should measure
Question:	what is the width
Answer:	It is 38 inchs long.
Question:	I have an acura mdx (2016). will it fit the top of that bumper
Answer:	I’m not sure ... the measurements for this bumper guard is 37.5” x 2.95”. You will need to measure your own bumper. Don’t guess the measurements. Start measuring the flat top of bumper to the curve edge.

Product features

Universal Rear Bumper Protector Guard

Features:

ANTI-SLIP design

Easy installation

Not easy to deform

Made of soft anti-scrape rubber

Universal fits for most cars / SUVS

Thick, durable and flexible

Resistant to high and low temperature

Prevents your car from wear and tear, paint scratches

Product description

OE Style Bumper Protectors shield your vehicle's rear bumper from wear and damage caused by day-to-day loading and unloading. Unlike flat bumper plates that protect only the top surface, Auto Vent shades design is custom-fit to wrap around the vulnerable bumper lip for maximum protection. OE Style Bumper Protectors are designed to match original equipment style, with a matte black finish that's 100% UV protected to resist chalking. They install in minutes and last a lifetime, thanks to their super-secure automotive-grade 3M adhesive.

• Protect your vehicle's rear bumper from wear and damage caused by day-to-day loading and unloading
• Custom-fit design wraps around the vulnerable bumper lip for maximum protection
• Matte black OE-Style finish is 100% UV protected to resist chalking
• Installs in minutes with automotive-grade 3M adhesive
• Proudly made in the USA and backed by a Limited Lifetime

User questions & answers

Question:	Some reviews indicate that this may partially cover parking sensors. does anyone know if that is the case for the 2018 toyota highlander limited
Answer:	45 1/2 ''
Question:	this looks like its someone universal. Will this fit on a 2020 Honda Pilot
Answer:	It fits my 2019 highlander limited with no problems. I’ve had about a week. Directions to install are clear. Only snag is they recommend not using the vehicle for 24 hours and Keeping it dry so the adhesive sets
Question:	What's the length on it
Answer:	Thanks for contacting us with your question.Yes, the BumperBully BLACK EDITION will fit your vehicle, however, if your rear license plate is located in your lower rear bumper you will have to remove the center portion of the BumperBully so that your rear license plate will remain visible when parking outdoors on the street.
Question:	Does it fit to toyota highlander
Answer:	Thanks for contacting us with your question.Yes, the BumperBully BLACK EDITION will fit the BMW 5 series well.If you have any further questions or issues please contact us for assistance.

• This will work right out of the box for MOST cars, but some will require trimming. This will NOT fit the new 2016+ Prius, Ford Fusion, and all unique, "non flat" bumpers. PLEASE CONTACT US FIRST if you are unsure if this will fit your car.
• QUALITY DESIGN -The black rubber will compliment any color and is made from premium EPDM rubber that will protect you from "love taps."
• IF THERE IS DUST/DISCOLORATION on rubber Just wipe with vegetable oil on a cloth.
• SAVE BIG ON REPAIRS -Use our bumper guard to cover up existing scratches, dents and blemishes. A great & cheaper alternative to bumper repair and repaints.

User questions & answers

Question:	Can BumpeX be installed so it looks straight and even? (I'm concerned it may not go on straight or look wavy when installed
Answer:	It's a rubber bumper. Yes it's waterproof.
Question:	Is there a way to remove the logo and have a clean black bumper
Answer:	From what I understand, the adhesive used on Bumper X is a 3M product which is very similar to adhesives used for other "stick on" automotive products. It can be peeled back off by hand and any residue can be removed with rubbing alcohol. It should not damage anything unless the finish underneath was defective to begin with. I.E. already cracked, peeling, clearcoat affected by the sun, etc.
Question:	is it waterproof
Answer:	This is not the best answer for protection it's more for hiding a damaged bumper or just for looks it has an adhesive backing which in time these are easy to come off.
Question:	What is required to remove it after a few years of use (tools, products)? I'm worried it will damage the bumper
Answer:	Absolutely can be cut with a scissors. I've done it.

Product features

A great alternative to bumper repaint and repair!

Why pay the autobody shop a lot of money to fix and repaint a bumper that will only get thrashed again? BumperX is your alternative to costly bumper repair and can give your bumper a new look. The BumperX will adhere over deep scratches, puncture holes, chipped paint, and almost any small damage on your bumper. Sure it won't look as nice as a repaint, but your wallet will thank you!

Two sizes to choose from!

The BumperX was designed to fit most cars out of the box. It is slightly thicker than a quarter which makes it easy to conform. There is a 5"x62" and 6"x 62" wide design. Please measure the width of the bumper before buying.

Attention Lyft & Uber Drivers!

Many of you drive a Prius. The BumperX was modeled to fit 1997-2015 Models right out of the box (These do not work with the 4th Gen, 2016+ models). Your passengers judge you on everything so don't let a beat up bumper affect your score!

Quality EPDM Rubber!

Resistant to:

• UV/UVA rays
• Rain
• Snow
• Car washes

Peel & Stick Protection

The BumperX has a special 3M adhesive that is designed to stick on automotive clearcoat/plastic/metal. Peel-Stick-Set It-Forget It! Like the mailman, "Neither snow nor rain nor heat nor gloom of night.." will affect the BumperX from falling off your car...unlike the Mailman, these will protect your car from love taps and bad parallel parkers.

Easily Modified

The BumperX fits most cars right out of the box, but since every car bumper is unique, you will sometimes need to do some 5-minute Do-It-Yourself work. BumperX can easily be trimmed with regular scissors to accomodate most bumpers.

Step 1: Prep Bumper

1. Wash bumper.
2. After it dries, use rubbing alcohol and go over bumper.

Step 2: Center It

1. Place painter's tape on the BumperX.
2. Center BumperX & adhere to bumper with painter's tape.

Step 3: Anchoring

1. Once BumperX is centered, peel one of the corners.
2. Secure that corner to bumper with the sticky backing.

Step 4: Set It

1. Slowly peel paper backing & press down a few inches at a time.
2. Once the BumperX is stuck, press hard on every inch with extra attention to all corners.