12 best bumper guards for suvs

Product description

Specifications:

* Material: Rubber

* Color: Black +Carbon fiber(As Pictures Show)

* Size: 27*3CM (Approx)

* Place: Front and Back

* Quantity: 4pcs

Package Contents:

4pcs Car Bumper Corner Rubber Strips

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.

• 【High-quality rubber material】 The car bumper protection strip is made of high-quality rubber and is attached with a strong adhesive. Please clean the surface before use, press for a few minutes after heating, which can effectively extend the service life.
• 【Easy to install】 Avoid sticking to exposed environments, wipe the car in advance and keep it dry, otherwise it will fall off easily. Do not wash and wipe the car within 48 hours after installing. Otherwise, it will fall easily. You can stick the side bumper guards on any place of your car like the front bumper, rear bumper, door guard and corner.
• 【Perfect protection】 The rubber strips for car bumpers are flexible to install and avoid the car to wear and tear, scratches paint scratches, collision. Heat and cold resistance and waterproof. When removing the strips, it wouldn’t take pint off.
• 【Scope of application】 The car bumper guard protector is suitable for general vehicles, such as suvs, trucks, and pickups. Before ordering, please carefully check the size of the product (27*3CM).
• 【Package content】 4pcs Car Bumper Corner Rubber Strips. Please rest assured, whether it is before or after the purchase, if you encounter any problems, please feel free to contact us by email, we will serve you within 24 hours.

User questions & answers

Question:	Will it fall off during the car wash
Answer:	I used one. Depends on where you use it. Got pad at dollar store and used 2 or 3.
Question:	For this item allowed return or no
Answer:	I am not sure but it does come in lots of sizes

Product description

T-Rex rear bumper protector is a lightweight high quality bumper guard made of high density durable and all weather foam material that will absorb the impact of the car bumping into your vehicle as he is trying to park. Fits most cars with the 31" Straps that is extended from either side of the Bumper Guard. Includes Velcro, to use if the straps don't fit.

• Universal fit: this bumper guard fits any car small and large
• Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings dents and scratches when you park the car
• Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in a breath
• 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners
• Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps

User questions & answers

Question:	need extra straps to my T-rex bumper guard
Answer:	Yes it is possible the only thing is that you might have to cut the bumper cause it might cover the license plate in the front
Question:	Does it fit on 2018 VW Jetta
Answer:	Yes, this bumper will stop the sensors from working....it happened to my daughters car...
Question:	Could one possibly buy 2 and place one on the rear bumper and one on the front of the car
Answer:	Thanks for contacting us with your question. Yes, the BumperBully GOLD EDITION should fit the Mercedes SL600 well. Another option you might want to consider is the ParkingArmor 4.8 Edition as its 48 inches wide and approx. 2 inches thick. If you have any issues please contact for assistance. Thanks, EuroBumperGuard Customer Service Dept.
Question:	does the wrap on the bumper prevent the sensor from working
Answer:	Thanks for contacting us with your question. Yes, the BumperBully GOLD EDITION should fit the Hyundai Elantra well. If you have any additional questions or concerns please contact us for assistance.

Product features

T-Rex Bumper Protector

T-Rex Bumper Protector absorbs the impact of a car bumping into your vehicle as he is trying to park.

In some cities, it's extremely difficult to find a parking. Sometimes, as a last resort, drivers have to make do with a really tight gap.

The T-Rex Bumper Protector guards your rear bumper from other drivers struggling to fit their vehicles into a difficult spot.

Or from newbies practicing their parallel parking skills.

The T-Rex Bumper Protector works effectively.

And it looks good.

Universal bumper protection

• Universal fit: this bumper guard fits any car small and large
• Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings, dents and scratches when you park the car
• Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in 2 minutes or less
• 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners
• Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps
• Works the same with or without the side straps

Step 1: Center over bumper

Center the Bumper Protector over the rear bumper.

Adjust the height.

Attach the top straps to the carpet inside the trunk with the Velcro ends.

Your trunk should close as usual.

Step 2: Attach side straps

Attach the side nylon strap hooks around the sides of your bumper.

Make sure the foam pads come into the hooks to prevent scratching.

Step 3: Adjust side straps

Tighten the nylon straps as needed to produce a tight fit.

When done correctly, the straps will hold the bumper protector securely.

Step 4: Enjoy!

Installation complete!

Enjoy the peace of mind offered by the Bumper Protector.

Share your experience.

Step 1: Center over bumper

Follow Step 1 in the installation above.

For a minimalist look, remove the side straps.

Stick the Velcro surface to each ends with the adhesive side facing your bumper.

Step 2: Clean the bumper

Clean the side of the bumper with the supplied alcohol swab.

Dirt can prevent the Velcro sticker to adhere to the bumper's surface.

So be thorough.

Step 3: Stick Velcro pads

Peel off the sticker.

Attach the edges of the Bumper Protector to the side of the bumper you just cleaned.

Repeat for the other end.

Step 4: Installation complete

Enjoy your Bumper Protector!

Share your experience.

Product description

The Black Edition is the entry-level BumperBully model and comes standard with patented stabilizer bars (black color). The black on black design with a white logo gives the BumperBully Black Edition a stealth look and more subdued appearance. Please note the Black Edition BumperBully does NOT have steel reinforced straps or safety reflectors.



The BumperBully brand is #1 in bumper protection! The BumperBully is the only rear bumper guard made from a premium grade, soft, elastic rubber material, not PVC Plastic like many competing products.



The patented stabilizer bars enable the product to remain firmly in place on your bumper to offer maximum protection. The stabilizer bars add stability to the top of the BumperBully, preventing the corners from folding back and leaving your bumper exposed.



The Bumper Bully offers an extra wide bumper protector surface 46"x12”, which means it covers more of your car bumper. The best feature of the BumperBully car bumper guard is its unique shape and design; crafted to complement the graceful lines of all makes and models. The wider top portion gives maximum protection, while the lower portion tapers inward to ensure the product (if installed properly) will not block the exhaust pipes (you should never block vehicle exhaust pipes). No other bumper protector gives you all these benefits.



WARNING: Intended to be used on parked vehicles ONLY! Never drive with the BumperBully attached.

• Bumper Bully Is The #1 Rated Rear Bumper Protector
• SUPER WIDE Bumper Protection Area measuring 46" x 12" - The Largest Bumper Protector
• Patented Stabilizer Bars (Black Color)
• Water Proof Trunk Straps (Not Steel Reinforced)
• PREMIUM Grade Rubber Material (PVC FREE)

User questions & answers

Question:	Will this fit a infinity g35x
Answer:	It will probably cover the sensors. I don't own it but someone in the reviews had the same issue.
Question:	Will this fit a bmw 528i
Answer:	Thanks for contacting us with your question. Yes, the BumperBully BLACK EDITION should fit the BMW X3 well. If you have any additional questions or concerns please contact us for assistance.
Question:	Will it effect the back up sensors on the bumper when placed over it
Answer:	Pretty thick but still Bendable and easy to apply.
Question:	Does it fit a 2019 bmw x
Answer:	Hi, it is universal fit for car bumpers, and the width is 2.9inch, you could check about it, thanks.

Product description

BEST NEW CAR ACCESSORY: Protect the paint and beautiful shape of your vehicle’s bumper with our 2.3'' thick and durable rubber license plate cover, which safeguards your car from those accidental back-ins. A FEW DOLLARS NOW TO SAVE YOU BIG LATER: Do you really trust people to parallel park in the big city with all the hustle and bustle of traffic and NOT hit your car? Protect it! Save yourself the headache and some big bucks! HANDSOME AND SLEEK LICENSE FRAME: Enhance the beauty of your car with our jet black license plate holder and bumper protector. Its great looks combine with fantastic function to ensure your car’s value. NO SPECIAL TOOL ASSEMBLY: Easy to install within a couple of minutes with a standard screwdriver. Simply remove your plate, adjust the cover around the perimeter of it and re-mount. Done. PURCHASE TODAY: Each day you drive or park your car without our innovative rubber bumper shield you are risking damage to your fine looking car. Add this to your cart now and protect your investment!

• BEST NEW CAR ACCESSORY: Protect the paint and beautiful shape of your vehicle’s bumper with our 2.3” thick and durable rubber license plate cover, which safeguards your car from those accidental back-ins.
• A FEW DOLLARS NOW TO SAVE YOU BIG LATER: Do you really trust people to parallel park in the big city with all the hustle and bustle of traffic and NOT hit your car? Protect it! Save yourself the headache and some big bucks!
• HANDSOME AND SLEEK LICENSE FRAME: Enhance the beauty of your car with our jet black license plate holder and bumper protector. Its great looks combine with fantastic function to ensure your car’s value.
• NO SPECIAL TOOL ASSEMBLY: Easy to install within a couple of minutes with a standard screwdriver. Simply remove your plate, adjust the cover around the perimeter of it and re-mount. Done.
• PURCHASE TODAY: Each day you drive or park your car without our innovative rubber bumper shield you are risking damage to your fine looking car. Add this to your cart now and protect your investment!

User questions & answers

Question:	Has anybody used this on a Chrysler Pacifica or Voyager van
Answer:	No I used it on a Honda passport. It looks like it will work on any car that accepts a standard license plate
Question:	can it be used for the back license plate too
Answer:	Yes I have the both cover front and back but if you have camera in the rear be careful cause is so bulky it may covered a little like it happened to me so when you place it in the rear back I have to place a little down kind of under the camera I hope I answer your question
Question:	Es para todo tipo de vehiculos
Answer:	si pero solo protege de frente y lijeros golpecitos.
Question:	Would it work on 2019 Toyota 4Runner
Answer:	I don’t see why not it’s the size of your license plate

Product description

Advgears Rear Bumper Protector Universal Black Guard



About the product:

- High grade anti-scrape rubber with matt surface, is soft and strong.

- Cover existing scratches and prevents your car from wear and tear, scratches paint scratches and so on.

- Decorate car appearances, make your car particular and unique



Method of installation:

1. Find the correct install position, before removing the tape protective film on the products.

2. Clean surface of Installation position to ensure that it`s clean and no oil, grease and wax and so on.

3. Pace the item on the exact position carefully,Paste the trim,press it to ensure good adhesion. Repeated pressure for stronger adhesion.

4. Please do not wash your car within 24 hours,so it can be good bond strength.

5. Please heat the adhesive tape under the item to Increase the stickiness if you have hot hair dryer. (affected by temperature)



Include:

1X rear guard bumper

1X tape



About Advgears:

Advgears store highly appreciates all customers' opinions to improve the selling, also if anything you unsatisfied, please contact our customer service department for probable best solution.Scroll up & click add to cart now!

• Great Material: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation.
• Multi-Function: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage.
• Unique Design: ANTI-SLIP DESIGN of this rubber guards, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put.
• Light Weight: This scratch-resistant rubber bumper guard is very durable,flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install.
• Satisfaction Guaranteed: Your purchase is fully protected when you order this rubber bumper protector today. If you have any problem, we will solve it within 24 hours.

User questions & answers

Question:	Will fit subaru 2019 crosstrek
Answer:	I got gorilla glue brand tape from Lowe’s. Worked perfect.
Question:	Does it fit a 2015 Honda accord
Answer:	My daughter is currently using my Mitsubishi lancer which is the vehicle that I installed the sun. It covers the width of the trunk with about 2 inches on each side. All you do is Center it in the center of the bumper if it’s not quite long enough or you can just simply cut it. I’ve had it on the back of that car now for well over a year and it’s worked out really great.
Question:	There was almost no tape. What specs are spe so i may order more
Answer:	I don’t know I have a 2018 Jeep and it is pretty big you cut it down to fit in the back of your vehicle . I m happy with mine....
Question:	What is the dimension when layed flat
Answer:	Yes most likely

• ✅ Fitment- The car bumper guard protector works for universal car, such as suv, trucks, pickup. Please check the picture 3rd about the size (10.7’’*1.25’’) carefully before you order. Thickness: 0.17’’.
• ✅ Premium rubber material - Made for high quality rubber, the car bumper strip protector is attached with the strong adhesive. Note: Please clean the surface before using and press it for several minutes after heating, it will effectively extend the service life.
• ✅ Easy to install - Avoid sticking to exposed environments, wipe the car in advance and keep it dry, otherwise it will fall off easily. Do not wash and wipe the car within 48 hours after installing. Otherwise, it will fall easily. You can stick the side bumper guards on any place of your car like the front bumper, rear bumper, door guard and corner.
• ✅ Elegant Protection - The rubber strips for car bumpers are flexible to install and avoid the car to wear and tear, scratches paint scratches, collision. Heat and cold resistance and waterproof. When removing the strips, it wouldn’t take pint off.
• ✅ Product quality support - JoyTutus offers 1-year product quality support. Package includes 4pcs car bumper guards for cars.

User questions & answers

Question:	Bumber so low hits curb will this help protect it
Answer:	We recommend this product to be used on bumpers and doors to protect your car, which will not affect your sensors.
Question:	Diagram indicates a length of 10.6"...can this be cut (with scissors or other cutting devices) shorter
Answer:	Hi, Please follow the instructions on user manual before first time use, and feel free to contact us by sending us a message on Amazon if any questions. Thanks.
Question:	How thick are they, and are they flexible enough
Answer:	No
Question:	Do these work with parking sensors on VW Tiguan
Answer:	No

• Protects the rear bumper from low-speed impacts from parking thereby preventing scratches. NOTE: DO NOT drive with it on if the rear bumper protector will cover the license plate, back lights or others, you can use the car bumper guard when the vehicle is parked.
• High quality and high density durable foam material, strong bumper guard, can effectively protect the bumper from dings dents and prevent friction scratches. Highly recommended universal bumper protector in New York or other cities.
• Universal rear bumper guard. Size: 72" x 8.07" x 0.4" inches. PLEASE MAKE SURE THAT THE BUMPER GUARD SIZE IS NOT TOO LARGE FOR YOUR CAR
• The bumper is fully protected, it extra length goes around the corners to protect corners well, too. Your bumper is protected from end to end. Must have car accessories for parking.
• Easy to install, installation with no damage, 2 velcro straps with elastic and 2 extension hooks to secure it in the place. The item will send with installation instructions.

User questions & answers

Question:	Will this fit a Honda Odessey
Answer:	Yes it will fit perfect because it clips and has a leather cloth protecting the metal clip as you adjust the straps it’s kinda like a bookbag Adjustable straps however, if you live in a bad neighborhood I don’t recommend getting it mines was stolen from my car by someone unclipping the sides and pulling it out my trunk .
Question:	Will this fit 2015 Honda Civic lx
Answer:	I bought these for my grandchildren for Christmas hadn't given them these yet but try repositioning the batteries in the one that stopped see if that works for you GL
Question:	will this fit a 207 Subaru Outback
Answer:	My cars work on a 10' area rug from target. (It's not a shag rug) It does slow them down a bit, but they do operate at a decent speed on the rug. Very fun and awesome.
Question:	Will this bumper fit a bmw 2017 x3 and how does it clip onto the fender well
Answer:	They go left and right as well as up and down.

Product description

The Bumper Apron is made of soft cloth on top and flexible, smooth neoprene on the bottom. Easily installed with Velcro, it sits flat in your trunk taking up minimal space. When you need it, just pull the handle and lay it over your bumper. Load your items, then lay the Bumper Apron on top of them. To unload, grab the handle again and pull the Bumper Apron out to protect your car and keep your clothing clean. The Bumper Apron; it’s incredibly durable and easy to use.

• The Bumper Apron; it’s incredibly durable and easy to use.

Product description

Patented, durable, and long-lasting rubber design. Fits most sedan vehicles. Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Mildew and stain resistant - loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry. High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations. Strong security straps - Help Deter Theft - Ultra Heavy Duty. Protects the rear bumper from low-speed impacts from parallel parking thereby preventing scratches. Conforms to the vehicle's unique contours and blends with its shape and does not detract from its stylish appearance. WARNING: Intended to be used on parked vehicles ONLY! Never drive with the Bumper Butler attached.

• WARNING: Intended to be used on parked vehicles ONLY! Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
• Dimensions: 43 X 11 inches
• Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use
• Patented, durable, and long-lasting rubber design; Fits most sedan vehicles
• High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations

User questions & answers

Question:	Do these rugs serve the trunk of a Mitsubishi Lancer
Answer:	It’s 55x31.5”. This nat can be cut to fit ur cargo area if it’s too big. Just follow along the lines.
Question:	does this fit on a Toyota Sienna
Answer:	I have a honda accord and I think it’s covers it pretty well.
Question:	Can anyone tell me dimensions of the inner outlined section of mat
Answer:	Yes it will
Question:	Will it fit 2019 Lexus 350 rx
Answer:	Yes, this will fit a 2015 Nissan Altima.

Product features

Premium Seat Covers, Auto Accessories and More

At FH Group we offer a wide variety of automotive products designed to make your life easier and more enjoyable.

Protect Your Vehicle's Bumper in City and Urban Parking

Protects the rear bumper from low-speed impacts from parallel parking thereby preventing scratches. Measures 43" X 11" inches for superior protection

Simple Installation

Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Never drive with BumperButler attached intended for parked vehicles only!

Safety Reflectors for Increased Visibility

High-Intensity Safety Reflectors make the BumperButler stand out to vehicles parking behind you.

Durable Lasting Rubber Design for most Sedans and SUVs

Patented, durable, and long-lasting rubber design. Strong security straps - Help Deter Theft - Ultra Heavy Duty.

About Us

FH Group International, Inc. is a manufacturer you can depend on and trust. Our mission is to exceed your expectations by providing a large selection of outstanding car accessories at affordable prices. We are constantly striving to provide our customers with the most efficient and friendly communications, smooth transactions, and speedy deliveries.

At FH Group International, Inc., we offer a variety of car accessories such as high quality seat covers and car covers for most makes and models on the market, protective floor mats, genuine leather steering wheel covers, and much, much more.

• ✔#1 AMAZON'S CHOICE. Buy with confidence!
• ✔ULTIMATE PROTECTION - Our bumper protector / bumper guard will protect your bumpers from expensive scratches, dents, and dings at an affordable price! Avoid anything less that will lead to expensive body repairs. We know the feeling.
• ✔ALL WEATHER - Made out of STRONG all weather foam material for use in rain, snow, or sunshine!
• ✔UNIVERSAL - Fully adjustable straps to fit most Cars and SUVs on the road! All brands A-Z are 99% compatible with our bumper guard!
• ✔WIDER IS BETTER - BumperSafe measures 72" wide protecting your bumper from corner to corner. Other products forget about the corners and only protect the middle of your bumper leaving the rest exposed to potential damages. Don't let this happen to you!

User questions & answers

Question:	Will this fit a 2011 Ford Fiesta
Answer:	Yes, this will fit a 2015 Audi A4. Thank you for your interest in BumperSafe.
Question:	Would this fit a 2015 Nissan Altima
Answer:	Es ajustable a cualquier medida de automóvil
Question:	will this fit a 2015 audi a
Answer:	It fits my Smittybilt X2O 12000 perfectly, I'd suggest comparing the size of your winch to the smittybilt to see.
Question:	Porque no lo van a vender más
Answer:	Mine is very secure sitting recessed on a 10,000 lb Warn winch mounted on a Warn Elite bumper. It is so tight it can’t blow off. I saw someone with a bungee cord with a similar cover mounted high. The warranty is not going to cover loss. Cover was tight and difficult to get on at first but now works great.

Product features

BumperSafe

BumperSafe is the ultimate bumper protector for your cars bumper. Do you parallel park anywhere? Then you need BumperSafe to take the worry out of leaving your car unattended and having your bumpers scratched, dinged, or chipped. Body repair can get expensive and here at BumperSafe we understand the frustration. We made BumperSafe from the ground up to ensure that we covered every base of protection on your cars bumper. BumperSafe is the solution to keeping your cars bumper in good shape for years on end! Trust in BumperSafe and keep your nice bumpers looking like new!

Adjustable

• Strong metal hook covered with a rubber coating to prevent scratches to the paint at the end of each strap.
• Extra long at 30"(inches) to fit 99% of vehicles.
• All weather coating to use rain, snow, or shine.

Fully Customizable

When we say Universal, we mean it! Our bumper guard is compatible with 99% of all Cars and SUVs (A-Z) on the road. Order with confidence knowing this will fit your vehicle hassle free.

• Customizable size to fit any vehicle, small or large.
• Laser etched lines serve as a guide to cut and shorten the bumper guard by up to 8 inches for smaller vehicles.

***Each line equals to approximately 1 inch of material.***

Secure

• Extra long velcro at the end of each strap for a secure fit.
• Strong adhesive backed velcro strips will stick to multiple surfaces in the trunk.

• Added protection against scuffs, nicks, scratches, and other damaging marks
• Textured surface provides slip resistance
• Quick and easy no-drill installation with the use of self-adhering 3M Tape
• Attaches directly to your rear bumper
• To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle

User questions & answers

Question:	Will it fit 2015 Kia Sorento
Answer:	Hello, our technicians checked for a fitment for the 2015 Sorento. We have determined that part# RBP-004 is a good fit for the 2015 Sorento. Here's the link: https://www.amazon.com/Dawn-Enterprises-RBP-004-Bumper-Protector/dp/B01N812T74/ref=sr_1_2?ie=UTF8&qid=1505926034&sr=8-2&keywords=rbp-004 Thank you, SPORTWING
Question:	does it fit a 2017 highlander
Answer:	I placed it on my 2017 Highlander. It looks just fine. Beats the $160+ chrome they want to install at the dealership. I wanted rubber for the sake of my dogs.
Question:	Does this part fit a 2014 ford edge
Answer:	Sorry, this doesn't fit the 2014 Ford Edge. Please visit this link for the bumper cover protector that does. https://www.amazon.com/Dawn-Enterprises-RBP-001-Bumper-Protector/dp/B01NA0KYFB/ref=sr_1_1?ie=UTF8&qid=1502288728&sr=8-1&keywords=RBP-001
Question:	Well this work with a power lift gate ? on a mazda cx
Answer:	Sorry, this will not work with the power lift gate feature. SPORTWING

Product features

Textured Surface

Rear Bumper Protectors feature a thick, textured, and non-slip surface. The stylish, textured surface design allows you to feel safe when setting something onto the bumper of your vehicle without fear of it falling off. Knowing your shoes are gripped to our RBP, you will feel safe stepping onto your bumper, rain or shine.

Easy Installation

Installing a Rear Bumper Protector to your vehicle is a breeze. Clean the surface of your bumper, peel the pre-applied 3M Tape, and stick the RBP on. Every vehicle is different, and some applications may require the RBP to be bent to match the exact curvature of your vehicle. A set of easy-to-follow installation instructions are included with your order.

Protective Barrier Against Damage

Drop a tool? No problem. Pet paws scratching your bumper? No problem. Manufactured using high quality polyurethane, Rear Bumper Protectors provide a layer of defense against damage. Without a RBP, you leave your bumper vulnerable and at risk of receiving scratches, chips, and scuffs. If your bumper already has a few unsightly marks, this RBP is capable of effectively covering up the damage.

Vehicle Fitment Checked!

Our installation staff has factory fitted this Rear Bumper Protector for proper fitment onto specific vehicles, ensuring it will perfectly fit the shape of your bumper.

STEP 1: Clean Bumper

Clean the surface of your bumper with a clean cloth. Then, using the alcohol wipe provided, wipe down the bumper until clean. Let any excess residue dry prior to installation.

PLEASE NOTE: Your vehicle should be at least 75°F for proper installation.

STEP 2: Line Up Arrow With Trunk Latch

To place your bumper protector properly, start by lining up the arrow on the bumper cover with the trunk latch located within the trunk of your vehicle.

PLEASE NOTE: Do not remove tape yet.

STEP 3: Dry Fit

After centering the bumper protector, carefully bend the sides along the curvature of your vehicle's bumper. This step is to ensure that you are happy with the placement before fully installing the bumper protector.

STEP 4: Remove 3M Tape

Remove all tape lining from the underside of the bumper protector. Do not touch tape or place onto a surface other than your bumper.

STEP 5: Place Center Down

Carefully place the center of your bumper protector down. Once again, you will line up the arrow on the bumper protector with the trunk latch. You will want to keep the bumper protector as close to the edge of your bumper as possible.

STEP 6: Bend To Match Bumper Curvature

Placing one side at a time, carefully guide the bumper protector along the curvature of your bumper.

PLEASE NOTE: Do not press down until you are completely happy with fitment. This allows you to pull bumper cover back up if a mistake has been made.

STEP 7: Press Down Firmly

Using a clean cloth, firmly press down on bumper protector.

STEP 8: Finished

You're done! Please allow up to 24 hours before washing your vehicle or traveling through inclement weather.

This Rear Bumper Protector Is Compatible With The Following Vehicles

Audi -- Q5 <2009-2017> || SQ5 <2009-2017>

Ford -- Edge (Excludes Models With Power Liftgate) <2015-2018> || Explorer (Excludes Models With Power Liftgate) <2011-2018>

Mazda -- CX-5 (Excludes Models With Power Liftgate) <2013-2021>

Nissan -- Pathfinder <2013-2016>

Toyota -- Highlander <2014-2019>

Volkswagen -- Atlas (Excludes Cross Sport) <2018-2021> || Tiguan <2018-2021>

Volvo -- XC60 <2018-2021>

Product description

Toryea Stainless Rear Trunk Boot Outer Bumper Protector Guard Plate Cover Compatible with NISSAN Rogue 2014 2015 2016 2017

Fitment:

Compatible with NISSAN Rogue 2014 2015 2016 2017

Benefits:

Easy, no-drill installation

High quality Stainless Steel, sturdy, can effectively protect the edge of the trunk and prevent friction and scratches

Industrial strength adhesive withstands weather and contact abuse

The appearance is bright and beautiful, the installation is simple, it can play a certain anti-scratch and scratch-proof function, and it is a decorative element

Include:

1 piece stainless steel rear bumper guard

Installation Steps:

Step 1: Clean the surface to ensure that it's clean and no dust or other impurities

Step 2: Make sure the location of the installation can completely fit the case before installation

Step 3: Products are equipped on the vehicle with exactly and use a clean cloth to press evenly is attached

Step 4: Stick it and press about 1 minute(Note:do not wash your car in 24hours)

• [Fitment]: Compatible with NISSAN Rogue 2014 2015 2016 2017
• [Convenient]: Attached with a high quality self adhesive tape, no drilling required easy installation and no tool required
• [Waterproof]: Protect your car anti-scratch and waterproof, textured surface provides slip resistance and channels away water
• [Appearances]: High brightness and special design, providing eye-catching show off and personalizing your car for long time
• [Non-slip]: Non-slip and textured surface, effectively protect the edge of the tail box friction scratch, add protection against scuffs, nicks, scratches, and other damaging marks

User questions & answers

Question:	Will this fit 2018 Rogue
Answer:	Yes, beautifully!! I also have cobalt and white dishes as well as other decorative pieces in cobalt and white. I love this rug.
Question:	Le queda a las
Answer:	Not yellow more of a grey tone ivory color.