12 best crc coolants

Product description

CRC TrueTap aqua cutting fluid is a water-soluble cutting fluid. It provides excellent cooling and lubrication and is a suitable replacement for solvent or oil-based cutting fluids. TrueTapTM Aqua works well in machine tools containing water soluble coolants. It will emulsify with the coolant without causing contamination. This fluid is ideal for cutting ferrous and non-ferrous metals. Recommended for tapping, threading, drilling, sawing, shearing, turning, and reaming metal parts, pipes, conduit, screws, bolt holes, housings, aluminum sheets, strapping, gears and chains. Use in conjunction with pipe threaders, drill presses, cutting tables, shears, tap sets, hand tools and lathes. Water soluble. A suitable replacement for solvent or oil-based cutting fluids. For use on all metals but works better when working with mild steels, cast iron, aluminum, and other non-ferrous applications. Greatly extends cutting tool life. Saves money by decreasing the number of tool repairs and new tool purchases. Does not contain 1,1,1-trichloroethane. 212 degrees F boiling point.

• Replacement for solvent or oil-based cutting fluids
• Works exceptionally well in machine tools containing water-soluble coolants
• Emulsifies with the coolant without causing contamination
• Ideal for ferrous and non-ferrous metals
• Greatly extends cutting tool life and decreases the number of tool repairs

User questions & answers

Question:	is it usda approved for water lines in a house
Answer:	I wouldn't think so, this is a fluid you use while cutting metal, with a lathe, milling machine, or bandsaw.
Question:	Can you mix this with water to run in a system like in a cnc machine
Answer:	This is already mixed. If you need Cnc coolant then you need to buy a larger 5 gallon, such as Hangsterfers or Microsol. This is for hand cutting.
Question:	Once mixed in water, does this lubricate seals
Answer:	I would review the Material Safety Data Sheet for this product for any chemicals that may be harmful to whatever seal you intend to use but this product is a machining lubricant much like the water-based coolant used in milling/drilling/cutting/shearing, etc. AN MSDS can be found here:... hope this helps. http://tvuka.tjxve.servertrust.com/v/vspfiles/pdf/crc/truetap_aqua_msds.pdf

Product description

The cutting and honing oil reduces heat and friction to ease cutting and extend tool life.

• Reduces heat and friction to ease cutting and increase cutting tool life
• Sulfur-free, low odor formula
• Excellent anti-weld properties
• Foaming aerosol formulation clings to vertical surfaces
• Compatible with all manual and motor-driven threading equipment
• NSF P1 Registered
• Extends tool life

Product description

CRC TrueTap foamy cutting fluid is an extreme duty cutting fluid designed for ease of application. TrueTap foamy is a high performance product that works well on ferrous and non-ferrous metals and can be applied before or during the cutting operations. It’s excellent foaming action penetrates deep into the cut to extend cutting tool life and promote a superior finish. Works well on stainless steel, carbon steel, inconel, monel, hastalloy, titanium, aluminum and other alloys and exotics. Recommended for tapping, threading, drilling, sawing, shearing, turning, and reaming metal parts, pipes, conduit, screws, bolt holes, housings, aluminum sheets, strapping, gears and chains. Use in conjunction with pipe threaders, drill presses, cutting tables, shears, tap sets, hand tools and lathes. Easy to apply - aerosol packaging allows for easy application. Amazing foaming action coats tooling. Greatly extends cutting tool life. Saves money by decreasing the number of tool repairs and new tool purchases. Provides excellent finish and accurate threads. Does not contain 1,1,1-trichloroethane and is considered environmentally safe. 88 degrees F boiling point.

• Foaming action penetrates deep into the cut to extend cutting tool life and promote a superior finish
• Works well on both ferrous and non-ferrous metals
• Can be applied before or during cutting operation
• Contains no 1,1,1-trichloroethane
• Easy application

User questions & answers

Question:	does this product come with a smart straw for precise application
Answer:	No, it does not.

Product description

A heavy-duty cutting fluid designed for use in severe applications. Thick, honey-like fluid clings to cutting tool throughout the operation. Excellent for use on tough stainless steel and exotic metals.

• Thick fluid clings to the cutting tool throughout the operation
• Contains no 1,1,1-trichloroethane
• Excellent for use on stainless steel and exotic metals
• Provides excellent finish and accurate threads
• Greatly extends cutting tool life and decreases the number of tool repairs

User questions & answers

Question:	I need to drill holes in agate stone slices for crafting. Is this necessary or useful for stone and lapidary drilling
Answer:	Drilling stone is different from metals and requires a medium to protect and cool the masonry bits. I don’t believe this would be the right medium for masonry or stone bits.
Question:	Can i use this product to cut a hole in a steel door? i make many holes in doors
Answer:	Yes, This product best use for tapping. If using for making many holes I would use coolant or cutting fluid instead.
Question:	I am new to cutting lubricants and how to use them. Do you apply it directly to the drill piece for example? thanks
Answer:	I'm fairly new to machining, and I bought this stuff as well. It works great by applying a small amount on the surface you are drilling and applying small amounts in in the hole you are drilling as you go. The key is to keep the drill bit lubricated in the hole as you drill. You will get better cutting results and save burning and dulling the bits.
Question:	What is the best way to clean this off of your drill bit and cutting area
Answer:	Drilling Metal I use Stiff Brush damp with Appropriate cutting oil. Drilling wood, plastic and the like I use a cheap paint brush dry.

Product features

TrueTap HD Heavy Duty Cutting Fluid, 16 Fl Oz

16 Ounce Bottle.

Heavy Duty Cutting Fluid.

Product Description

A heavy-duty cutting fluid designed for use in severe applications. Thick, honey-like fluid clings to cutting tool throughout the operation. Excellent for use on tough stainless steel and exotic metals.

Product description

great products

• Firm, waxy film is highly resistant to humidity and salt spray and never becomes brittle
• Removes easily with minerals spirits
• Preserves and lengthens useful life of equipment
• NSF H2 registered for use in meat and poultry plants
• Long term indoor/outdoor protection, up to 2 years

User questions & answers

Question:	Does this work on exposed galvanized metal poles
Answer:	Yes. This is used around exposed metal in the military and around urinals on military aircraft. I use it on my cars frames soon after I purchase them. Good product. Has a little amber appearance when dry.
Question:	What happens when applied surface gets hot (350F), does it melt, liquefy/burn off, or solidify/leave a crust
Answer:	This product acts essentially as a paraffin wax after it dries. Therefore, it will “melt” at higher temps, but it is more durable than oil coatings. I would suggest if your product is typically exposed to temps above 100 degrees, a paint or powder coat would be more appropriate.
Question:	Can this be used on a cast iron vent register ? It is going to be placed over the vent at the baseboard right next to the tub in a bathroom
Answer:	This is not a paint. It will apply a waxy film on the item. Great for protecting tools and other bare metal surfaces from rust, but probably not a good application for a vent register. If it continues to rust through your paint in that humid environment, I'm thinking you're using a latex paint. I'd try an enamel paint.
Question:	does this work on firearms such as rifles
Answer:	I'm sure it would, but it leaves a waxy residue.