12 best badger air brush glass jars

Product description

Master Airbrush (Pack of 10) TB-003 Empty 3/4 Ounce (22cc) Glass Jar Bottles with 60° Down Angle Adaptor Lid Assembly - Fits Single-Action Siphon Feed Airbrushes, Use with Master Badger Paasche, Iwata

Industry Standard Adaptor Connection Angle and Connection Size for Siphon Feed Single-Action Airbrushes

The connection angle is at the industry standard 60° down angle from vertical that most brands of siphon, suction, or bottom feed single-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet. The adaptor lid assembly is compatible to fit most popular single-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc...

Jar and Lid Assembly Specifications

Material: Glass jar bottle with plastic lid and metal adaptor connector; Connector: 1/5" (5mm) size adaptor at a 60° down angle; Fluid Capacity: 0.75 fl oz (22 cc); Bottle Height: About 2"; Bottle Diameter: 1.4"

Not For Use with Dual-Action Airbrushes

Do not use these 60° down angle jar and lid assemblies with dual-action airbrushes, as the jars will tilt forward when attached, and not be parallel with the airbrush body. Dual-action airbrushes require the 30° down angle from vertical adaptor connector to fit onto the airbrushes properly.

• Pack of 10 Master Airbrush Model TB-003 Jar and Lid Assemblies. Empty 3/4 Ounce (22cc) Glass Jar Bottles with a 60° Down Angle Adaptor Lid Assembly. For use with siphon feed single-action airbrushes.
• The connection angle is at the industry standard 60° down angle from vertical that most brands of siphon, suction, or bottom feed single-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet.
• The adaptor lid assembly is compatible to fit most popular single-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc...
• Jar and Lid Assembly Specifications - Material: Glass jar bottle with plastic lid and metal adaptor connector; Connector: 1/5" (5mm) size adaptor at a 60° down angle; Fluid Capacity: 0.75 fl oz (22 cc); Bottle Height: About 2"; Bottle Diameter: 1.4"
• Not For Use with Dual-Action Airbrushes: Do not use these 60° down angle jar and lid assemblies with dual-action airbrushes, as the jars will tilt forward when attached, and not be parallel with the airbrush body. Dual-action airbrushes require the 30° down angle from vertical adaptor connector to fit onto the airbrushes properly.

User questions & answers

Question:	Are the tubes glass or plastic? The media im using requires no plastic parts. Any suggestamendations
Answer:	Bottles are glass, caps are a vinyl molded material with a Teflon like seal, connector appears to be a chrome plated metal and tubes are an inert tygon like material. I have used them with lacquer and acetone and they hold up fine.
Question:	will this bottle fit and work in Aztek model A370 air brush
Answer:	One bad thing about these bottles, no plain caps to seal the bottle. It is an odd size. However the feed tube should fit most brands.
Question:	can you keep paint in the bottle. will it dry out
Answer:	Since these bottles did not come with a regular bottle cap, I transfer my unused paint to another paint bottle, place a small section of sandwich wrap on top of the bottle and place the cap on. This seems to seal it. Before using the paint I stir for a minute or two before using again. Hope this helps.
Question:	Does it fit central pnuematic (harbor freight) air brush
Answer:	I purchased these for a Paashe...The Iwata (and Harbor freight I think) airbrush work with the bottles that have the less severe angle...like 60 degree if I recall

Product description

Master Airbrush (Pack of 10) TB-010 Empty 2.7-Ounce (80cc) Glass Jar Bottles with 30° Down Angle Adaptor Lid Assembly - Fits Dual-Action Siphon Feed Airbrushes, Use with Master, Badger, Paasche, Iwata

Industry Standard Adaptor Connection Angle and Connection Size for Siphon Feed Dual-Action Airbrushes

The connection angle is at the industry standard 30° down angle from vertical that most brands of siphon, suction, or bottom feed dual-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet. The adaptor lid assembly is compatible to fit most popular dual-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc...

Jar and Lid Assembly Specifications

Material: Glass jar bottle with plastic lid and metal adaptor connector; Connector: 1/5" (5mm) size adaptor at a 30° down angle; Fluid Capacity: 2.7 fl oz (80 cc); Bottle Height: 2.6"; Bottle Diameter: 2.5"

Not For Use with Singe-Action Airbrushes

Do not use these 30° down angle jar and lid assemblies with single-action airbrushes, as the jars will tilt backward when attached, which interferes with the hose connection. Single-action airbrushes require the 60° down angle from vertical adaptor connector to fit onto the airbrushes properly.

• Pack of 10 Master Airbrush Model TB-010 Jar and Lid Assemblies. Empty 2.7-Ounce (80cc) Glass Jar Bottles with a 30° Down Angle Adaptor Lid Assembly. For use with siphon feed dual-action airbrushes.
• The connection angle is at the industry standard 30° down angle from vertical that most brands of siphon, suction, or bottom feed dual-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet.
• The adaptor lid assembly is compatible to fit most popular dual-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc...
• Jar and Lid Assembly Specifications - Material: Glass jar bottle with plastic lid and metal adaptor connector; Connector: 1/5" (5mm) size adaptor at a 30° down angle; Fluid Capacity: 2.7 fl oz (80 cc); Bottle Height: 2.6"; Bottle Diameter: 2.5"
• Not For Use with Singe-Action Airbrushes: Do not use these 30° down angle jar and lid assemblies with single-action airbrushes, as the jars will tilt backward when attached, which interferes with the hose connection. Single-action airbrushes require the 60° down angle from vertical adaptor connector to fit onto the airbrushes properly.

User questions & answers

Question:	I have a Paasche VL Set (double action), will those work? Do I need a 30° angle or 60°. Thank you
Answer:	Hey Mel ,I use Iwata now, but it was badger before that for many years.I had an airbrush shop in Key west for 10 years & most of the guys used the VL& liked them a lot .We did t- shirts most guys could work with any needle but only experience will dictate what works best for you call me if you like 763 420 8941 in minnesota.
Question:	Will these work with a Paasche H airbrush
Answer:	As long as it's Siphon Feed, yes
Question:	Does each bottle come with a siphon feed lid or is there only one lid for each bottle packaged with the bottles
Answer:	Each bottle have a lid
Question:	Does the lid match enamel paint lids
Answer:	No. They’re a little too big. Also the spout angle will not fit my binks or develbiss airbrushes.

Product description

This is a set of 10pcs glass 1.3cu in(22cc) airbrush bottles (siphon feed jars) with adapter lid assembly.



It keeps cleaning fluids for airbrushing and compatible with most airbrushes of Master, Badger, Paasche etc.



Color: Transparent

Material: Glass

Capacity: 22cc / 1.3 cu in

Item Size: Approx. 3.5 * 7cm / 1.4 * 2.8in (D * H)

Item Weight: Approx. 61.7g / 2.2oz (Each Bottle)

Package Size: Approx. 18.5 * 8 * 7.5cm / 7.3 * 3.1 * 3.0in



Warm Notice:

1. Before use, please ensure that the surface is clean, dry, smooth and free of oil or other substance .

2. Peel-off the backing liner and apply.

3- This bottle fits most airbrushes but not all, before you purchase, please kindly check whether this bottle suits your airbrush, the diameter of bottle's connection tube is about 4.48MM, angle is 120 degree, for details, please kindly check the 2nd picture of this listing; thanks much

• These glass bottles are perfect compatible with Master airbrush.
• Fits most popular siphon feed airbrushes: compatible with most airbrushes of Master, Iwata, Badger, Paasche, etc.
• Works great, can quickly interchange with the airbrush.
• Material: Glass bottles and lid with metal connector.
• It's Transparent and Clearly to show the true color of the paint inside.

User questions & answers

Question:	will these work with a badger 155 airbrush
Answer:	I have a model 150, but I think it is physically the same as the 155 with regard to the bottle attachment. I find that the angle of the connector is just a tiny bit off from a Badger-brand item, but they do work.
Question:	Does it come with all 10 caps
Answer:	The only thing they don't have are the small plastic caps to put over the siphon connector to keep the contents from drying out when stored (for a short time). These are available for purchase separately and are a good extra purchase for these. Each bottle comes with its own plastic lid, siphon tube, and angled airbrush connector.
Question:	does each bottle have its own lid and siphon tube
Answer:	Yes, they do. The bottle is glass but the lids are plastic. The airbrush connector is metallic, and the siphon tube is plastic. A good accessory for these are the little plastic tips you can buy separately, which you can place over the connector and store your paint for a short time without drying out. Good for those colors (primers) that you use frequently and want to keep at the ready all the time.
Question:	Has anyone tried these with the harbor freight deluxe airbrush? (double action
Answer:	I use them with an Iwata Eclipse BCS (which is similar) and was impressed with the quality of these bottles. The suction tube is cut to fit against the wall of the bottle and angled appropriately. The connector is tapered from an outside diameter of 4.5mm at the tip to 4.75mm at its base and is a little bit longer than 9mm. If the intake of your Harbor Freight is sized similarly, they would work.

• The standard 3/4 oz bottles that can screw onto the plastic lid assemblies of both the 30° and 60° adapter connections for all airbrushes.
• These 22cc glass bottles are perfect for Master airbrush.
• Fit all the airbrush brands: for Iwata, Master, Badger, Paasche, etc.
• 1 Box of 10 3/4oz glass airbrush paint jars with plastic lids.
• Work great and quickly interchange with the airbrush.

User questions & answers

Question:	What's the diameter of the top of the jar (opening
Answer:	The diameter of the top is close to that of badger but the threads do not hold to the Badger lids.
Question:	Can anyone verify that these fit a Badger airbrush? Someone wrote in their review that they did not fit the Paasche airbrush as advertised
Answer:	These jars are slightly smaller than my badger lids, so the lids cannot be tightened, the threads simply slide past each other when tightened.
Question:	Item photos show foam gaskets, are these actually included
Answer:	this product have 10 pcs bottles with plastic lids.
Question:	does it work with lacquer paint
Answer:	Yes they will store small quantities of lacquer.

Product features

Specifications:

Color: Transparent

Material: Glass

Capacity: 22cc / 3/4oz

Use: Suitable for all the Airbrush

Item Size: Approx. 3.5 * 5cm / 1.4 * 2.0in (D * H)

Item Weight: Approx. 49g / 1.7oz (One Bottle)

Package Size: Approx. 18.5 * 7.8 * 5.8cm / 7.3 * 3.1 * 2.3in

Package Weight: Approx. 518g / 18.3oz

Product description

Badger Air-Brush Company Stock Number R2-060, 20 Millimeter 1 ounce Glass Jar with Cap. Replacement jar for Renegade Spirit side feed airbrush. Used with R2-061 jar adaptor. Suitable to use for paint storage. Badger Air-Brush parts are proudly made in America.

• Stock Number R2-060, 20 Millimeter 1 ounce Glass Jar with Cap
• Replacement jar for Renegade Spirit side feed airbrush
• Used with R2-061 jar adaptor
• Suitable to use for paint storage
• Badger Air-Brush parts are proudly made in America

Product description

Badger Air-Brush Co. #50-0053B 2-ounce clear glass Jars and Covers (box of 6) are ideal for paint storage. Lid includes inner seal and jar features 33-millimeter neck. Jar attaches to Badger and Thayer and Chandler siphon feed airbrushes with 50-208 or 50-308 jar adaptor caps. Distributed by Badger Company.

• 2-Ounce clear glass jar
• Ideal for paint storage
• 33-millimeter neck; jar attaches to Badger and Thayer and Chandler siphon feed airbrushes with 50-208 or 50-308 jar adaptor caps
• Lid includes inner seal
• Distributed by Badger Company

Product description

Master Airbrush (Pack of 10) TB-001 Empty 3/4 Ounce (22cc) Glass Jar Bottles with Plastic Lids - Replacement Jars, Paint Storage Bottles - Jars Screw Into Siphon Feed Airbrush Lid Adaptor Assemblies

Replacement Jars, Paint Storage Bottles

The bottles are great for paint storage and are also ideal for use as a replacement jar for airbrush lid assemblies. The screw-on plastic lids allow you to seal up the jars and store any of your airbrushing paints, so they are ready for their next use. The jars have the industry-standard 3/4 ounce thread size that allows them to screw into most plastic topped siphon feed airbrush lid adaptor connector assemblies that require 3/4 ounce jars. Fluid Capacity: 0.75 fl oz (22 cc); Bottle Height: About 2"; Bottle Diameter: 1.4"

• Pack of 10 Master Airbrush Model TB-001 Jars with Lids. Empty 3/4 Ounce (22cc) Glass Jar Bottles with Plastic Screw-On Lids. Threaded 1/8" thick clear glass jars.
• The bottles are great for paint storage and are also ideal for use as a replacement jar for airbrush lid assemblies.
• The screw-on plastic lids allow you to seal up the jars and store any of your airbrushing paints, so they are ready for their next use.
• The jars have the industry-standard 3/4 ounce thread size that allows them to screw into most plastic topped siphon feed airbrush lid adaptor connector assemblies that require 3/4 ounce jars.
• Fluid Capacity: 0.75 fl oz (22 cc); Bottle Height: About 2"; Bottle Diameter: 1.4"

User questions & answers

Question:	Has anyone figured out where to buy the correct size foam or rubber lid liner? My calligraphy inks dried out from poor seal in all jars
Answer:	The ones pictured above work very well for neck and shoulder
Question:	Do they leak with liquids
Answer:	I posted an inquiry response to ask if or when you get the answer about material grades earlier. Then I kept looking through the maze of products available along with as many different claims of their own cold pack superiority. I discovered what I believe to be a verifiable answer to this question about the difference of clinical grade vs others. Chattanooga col pak reusable wraps with the Black urethane material is far more durable and superior than the other blue material which is Vinyl. As stated above, black material is heavier duty meeting Military and Civilian Healthcare strict specifications, however, cannot find evidence of numbers in material composition min and max. I just ordered my first 2 cloak wraps!
Question:	How big exactly are these? the dimensions aren't helpful I would like 2 use them 2 sort my pills in my medicine cabinet so it'll match & saves space
Answer:	Yes, this will wrap around the neck to the back. Keep in mind that you will need to use something, perhaps a scarf to hold it in place. I recommend buying 2 so that 1 is keeping cold in the freezer when you are wearing the other one.
Question:	Why am I not allowed to return this when it won’t perform its intended purpose, storing paint
Answer:	Unfortunately there is not.

Product description

10 Quantity Clear glass with plastic lid and metal connector Suitable for Our dual action airbrush like AB128, AB182 and so on. 0.7 fl oz (22 cc) capacity

• NEW 10PCS Airbrush Air Brush Glass Bottle Jar 22CC / Standard Suction Lid
• New and high quality
• 0.7 fl oz (22 cc) capacity
• Suitable for many airbrush
• airbrush supplier

User questions & answers

Question:	Does it work with my vivohome 110-120v professional airbrushing paint system
Answer:	It should but i personally would go with the plastic bottles they're not as stiff and easier to attach
Question:	Will these work with an iwata airbrush
Answer:	As long as the airbrush is double action and siphon feed they should work fine.

Product description

Master Airbrush (Pack of 10) TB-009 Empty 3.4-Ounce (100cc) Plastic Jar Bottles with 30° Down Angle Adaptor Lid Assembly - Fits Dual-Action Siphon Feed Airbrushes, Use with Master Badger Paasche Iwata

Industry Standard Adaptor Connection Angle and Connection Size for Siphon Feed Dual-Action Airbrushes

The connection angle is at the industry standard 30° down angle from vertical that most brands of siphon, suction, or bottom feed dual-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet. The adaptor lid assembly is compatible to fit most popular dual-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc...

Jar and Lid Assembly Specifications

Material: Plastic jar bottle with plastic lid and metal adaptor connector; Connector: 1/5" (5mm) size adaptor at a 30° down angle; Fluid Capacity: 3.4 fl oz (100 cc); Bottle Height: 4.5"; Bottle Diameter: 1.5"

Not For Use with Singe-Action Airbrushes

Do not use these 30° down angle jar and lid assemblies with single-action airbrushes, as the jars will tilt backward when attached, which interferes with the hose connection. Single-action airbrushes require the 60° down angle from vertical adaptor connector to fit onto the airbrushes properly.

• Pack of 10 Master Airbrush Model TB-006 Jar and Lid Assemblies. Empty 3.4-Ounce (100cc) Plastic Jar Bottles with a 30° Down Angle Adaptor Lid Assembly. For use with siphon feed dual-action airbrushes.
• The connection angle is at the industry standard 30° down angle from vertical that most brands of siphon, suction, or bottom feed dual-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet.
• The adaptor lid assembly is compatible to fit most popular dual-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc...
• Jar and Lid Assembly Specifications - Material: Plastic jar bottle with plastic lid and metal adaptor connector; Connector: 1/5" (5mm) size adaptor at a 30° down angle; Fluid Capacity: 3.4 fl oz (100 cc); Bottle Height: 4.5"; Bottle Diameter: 1.5"
• Not For Use with Singe-Action Airbrushes: Do not use these 30° down angle jar and lid assemblies with single-action airbrushes, as the jars will tilt backward when attached, which interferes with the hose connection. Single-action airbrushes require the 60° down angle from vertical adaptor connector to fit onto the airbrushes properly.

User questions & answers

Question:	What kind of plastic is it? (I find that these bottles are hard to clean compared to those that come w/ the Iwata air brushes
Answer:	I have no idea what they're made of. I don't have to clean mine often but when I do I use acetone and it's no problem. Only issue I've had with these bottles is the stem pulling out of the top. They're so cheap though, in comparison to the others, I just throw them away and grab a other one. Always keep at least 5-10 extras on hand hand just in case. Might not be the best bottles on the market but for the price they're hard to beat.
Question:	I have a paasche vl set (double action), will those work? do i need a 30° angle or 60°. thank you
Answer:	Yes, These will work just fine. Be sure to order the caps too. So your colors don't dry up.https://www.amazon.com/BADGER-Jar-Adaptor-Cap-Pack/dp/B000BRSAMM/ref=pd_bxgy_201_2?_encoding=UTF8&psc=1&refRID=ED7DCKV8RREYFDDEHRBS
Question:	DO I need to look at buying anything else maybe a connectorfor Ex
Answer:	these connect directly to my air brush gun and we do not need any other components.
Question:	Are these bottles solvent proof
Answer:	it has not been used for solvent, bottles are glass but the tubing is plastic. not sure what effect the solvent would have on the plastic tubing unless its removed, sorry couldnot offer better answer

• Airbrush Cleaning Kit Spray Wash Cleaning Pot Stabilizer Jar Bottles Holder
• Multi-purpose cleaning jar,This clean pot also can be used as an airbrush holder,Eliminating over spray and mess in your work area,Heavy glass jar,Prevents the weight of an airbrush and hose from tipping over the pot
• The cleaning pot used to clean the airbrush, and collect residual paint inks.This nozzle needle is ideal for clearing away the blockages with dried paint,It can restore your nozzle back to perfect condition With careful use
• Easy-to-use, insert one of the included filter pads in the filter tube,Fill the jar 1/4 full with water and close the cover,Add solvent to your airbrush's color cup and spray through the rubber port in the cover, flushing the pigment from the brush and into the pot
• Package includes 1 x Glass Jar 1 x Airbrush Holder 1 x Pot Stabilizer 2 x Filter (Clingy) 1 Pcs Cleaning Pot with Holder +1 Pcs Cleaning Needles 1 Pcs 7 Nylon Tube Brushes.Non original aftermarket part.

User questions & answers

Question:	Does it fit a portable (Cordless) Airbrush compressor
Answer:	I'm assuming you mean those ones with the compressor attached directly to the airbrush. It should if you are just spraying out your cup. I use an iwata neo so im sure it's universal fit the holder though would be useless for it.
Question:	What is the giant hex key for
Answer:	Fits some single action airbrushes. I’ve never used it.
Question:	This was supposed to have come with that clip that holds the air brush in the jar, right
Answer:	Yeah mine came with a combination handle and air brush holder that attaches to the lid
Question:	Where do i buy replacment filters for the pot
Answer:	Filters are washable. Can’t imagine ever needing replacements. One year old, first filter still like new.

• Package including: you will get 30 pieces pour covers per package, so you will have enough products to cap your siphon jars
• Wide usage: it fits all kinds of airbrush bottles, so you don't worry about our product cannot use
• Good design: this airbrush cap keeps the air out, good for protecting your paint from being dry in the bottles
• Size: each pour cover measures approx. 1.5 x 0.6 cm/ 0.59 x 0.23 inches (LW), it can be extended to fit your jar
• Durable material: this caps are made of quality silicone, which is flexile and durable, ensure you to use for a long time

Product description

This package contains 1 empty 2 ounce glass paint jar with plastic screw-top lid. Measures 2-1/2" x 2" x 2". Paint sold separately. Glass jars fit 150, 155, 175, 200, 250, 350 & 360 Model Badger airbrushes.

• Country of Origin: United States
• Package height : 2.39 inches
• Package length : 1.94 inches
• Package width : 1.94 inches

User questions & answers

Question:	Is the lid for these jars solid, or do they have hole/s in them for the air brushes
Answer:	the lid for these jars are made of plastic and designed for paint storage which means they do not have a breather hole. Metal lids with breather hole. for spraying are available from Badger for these jars with metal airbrush attachment and nylon syphon tube.
Question:	Will this jar fit the Badger
Answer:	Yes, the 2 oz. does fit the Badger 250-2!