14 best 3d printing pens

Product description

Doodle, sketch and paint in 3D with this quality pen. See images above. It features a stepless variable extrusion speed control that allows for dialing in the perfect flow. The temperature can be changed to allow for ABS or PLA printing. This drawing kit comes with a lightweight, ergonomic stylus, 3 colors of ABS plastic and a 100-240V AC 50/60Hz adapter. It has a Power Output of 10 Watts with an Input power of 5 Volts/DC 2A, so it can be used safely outdoors as well. FCC, CE and RoHS-certified. Turn your ordinary drawings into 3D works of art. Order yours today!

• Turn your ordinary drawings into 3D works of art
• Stepless speed slider lets you regulate flow for optimal control of material while you're drawing
• New for 2019: ultrasonic sealed nozzle is nearly clog-proof and provides market leading durability
• The Super 3D Printing Pen is great for kids, artists and engineers of all ages
• Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty

User questions & answers

Question:	I can’t get the filament to dry in time for on-the-air drawing. How can I draw upwards and make a joint
Answer:	Well for me I just held it in place... it just hangs there from the tip of the pen and you have to pull it tight. But, after about five/six seconds it should harden enough to pull the pen away and you have a verticle line. But, my brother has a desk fan set up that he has turned towards his work and said it works well. You just have to make sure the fan isn't too close and bends the plastic. But, you shouldn't have an issue getting verticle lines if you just hold it in place for a few seconds.
Question:	What size filament does this require
Answer:	This uses standard 1.75mm ABS and PLA.
Question:	what material filament do you recommmend for teenagers due to ... smells, odors, VOCs, is anything available environmentally friendly
Answer:	PLA produces very little odor and is a plant-based bioplastic.
Question:	what temp does it run at
Answer:	210 C for ABS and 190 C for PLA

Product features

MYNT3D Super 3D Pen

Draw, design, build, repair and more with the MYNT3D Super 3D Pen. Check out our projects and tutorials guide online to get your imagination flowing!

Based on the Professional 3D Pen

The Super 3D Pen uses the same gearbox and replaceable nozzle design as the Pro 3D Pen. It does not have the OLED display or discrete temperature adjustment. There is instead a temperature adjustment screw for switching between ABS and PLA.

Easy to use

Red light indicates power. Green light flashes for heating mode and stays lit for ready mode. And away you go!

Dial it in

The stepless speed slider gets you the perfect extrusion speed for your current task. Set it to a crawl for intricate details and power it up for larger fills.

Product description

Doodle, sketch and paint in 3D with this quality pen. See images above. It features variable extrusion speed control and large OLED display to help monitor heat. The temperature can be adjusted from 130 to 240 C in 1 degree increments, to help fine-tune the thickness & flow-rate of extruded material. This drawing kit comes with a lightweight, ergonomic stylus, 3 colors of ABS plastic and a 100-240V AC 50/60Hz adapter. It has a Power Output of 10 Watts with an Input power of 5 Volts/DC 2A, so it can be used safely outdoors as well. FCC, CE and RoHS-certified. Turn your ordinary drawings into 3D works of art. Order yours today!

• Watch imagination come to life with the Professional 3D Pen
• Adjustable feed lets you regulate speed & flow for optimal control of material while you're drawing
• Temperature is adjustable in 1 degree increments from 130 to 240 C, for optimal fine-tuning
• Large, OLED display lets you monitor temperature of material to help you achieve a wide variety of effects
• Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty

User questions & answers

Question:	I want to use a 3d printing wheel filament to use it continuesly but will it rotate the filament as i feed it
Answer:	Desktop 3D printers that use a spool have a more robust feed mechanism than this pen. If you have your spools set to feed very smoothly and easily, like on a ball bearing setup, you should be OK. Where you might have issues is with having the spool on a solid plastic rod type holder which can add more friction or with some brands of filament that are not wound as well as others and can bind which also could be a problem. If you can employ some sort of method of keeping some slack in the filament so you're not pulling straight off the spool that seems ideal.
Question:	once the pen is heated and the abs starts to feed through the pen stops and starts cooling down mid draw causing you to reheat and restart
Answer:	An update as we had not seen this question earlier, Robert R had the correct answer. There was an issue with some of the power adapters that were packaged last year where power could momentarily drop on speed settings less than full speed and the pen would return to standby mode. Any 3D Pen Pro sold after March 2019 will not have this issue, and if you have one from last year and see this then please email us at support@mynt3d for a replacement.
Question:	How bad is the odor from the filaments? Daughter with scent allergies
Answer:	ABS fumes are bad for you. PLA is better, no matter what filament you use you should use it in a well ventilated area. PLA has less of an ordor and is a corn based plastic that is considered safer by 3D print enthusiasts.
Question:	How offten does this pen jam and how do you clear it
Answer:	Hi John, the most common cause of a jam (in any 3d pen) is deformation of the filament. This can be caused by incorrect temperature settings or an irregularity in the filament, and what happens is the heat causes the filament deform so that is not the right size/shape to pass through the pen. Typically this can be resolved by backing out the filament, cutting off the deformed section and continuing. However sometimes, the deformed section pulls off and remains lodged in the nozzle. One of the great things about our pens is that you can pop off the service door, easily remove the nozzle, remove the deformed section of filament and the pen is good as new. The key to avoiding jams is using high quality filament, setting the temperature correctly and most importantly, if the pen stops feeding normally pause your work and back out the filament instead of trying to force it through the pen. Following these tips, you shouldn't ever have jamming issues.

Product features

Elevate your imagination

Hold the magic of 3D printing in your hand with the MYNT3D Professional 3D Pen. Now you can use FDM technology in any application varying from drafting and prototyping to spatial learning and three dimensional sculpting. Whether you're an engineer or an artist, the MYNT3D Pen will take your design projects to greater heights.

Works with Nearly Any 1.75mm Filament Under the Sun

We at MYNT3D believe you should be able to use any thermoplastic you wish. ABS and PLA are a given, but what about wood or bronze infused filaments? If it is 1.75mm and melts between 140-230° C, then it will work in the MYNT3D Pen.

Fast, Slow, and Anywhere in Between

One speed isn't good enough for your car and it's not good enough for a 3D pen either. With the MYNT3D Pen you can crank up the extrusion speed for larger fill in areas and turn it down slow to create intricate works of art. The stepless design lets you dial in the optimal speed for any task you can throw at it.

Product description

Create, Draw, Doodle, Sketch, and Build like a Pro in 3D with our SCRIB3D Advanced. The SCRIB3D Advanced 3D Printing Pen features variable speed control, a large LCD screen to help monitor heat and ensure you have the correct settings, as well as a range of other engineering enhancements to ensure a smooth and accurate Doodling experience. The temperature of the SCRIB3D Advanced can be adjusted by fine increments so that you can vary the thickness & flow-rate of the extruded material. The pen is also ergonomically designed, with curvature intended to fit your hand, and a "soft touch" surface for optimal Doodling comfort. This 3d pen set comes with our top of the line 3D Pen, 3 colors of PLA filament, a stencil guide with 4 free projects, and a 100-240V AC 50/60Hz adapter. As well as being design for the Pro doodler, easy to use and well engineered, the SCRIB3D Advanced 3D pen is FCC, CE and RoHS-certified. Bring your imagination to life today, the Advanced way! Compatible with most types of filament, but works best with SCRIB3d filament.

• [GREAT FOR GIFT-GIVING] Create, Draw, Doodle, Sketch, and Build like a Pro in 3D with our new SCRIB3D Advanced Pen. It features variable speed control, a large LCD screen to help monitor heat and ensure you have the correct settings, as well as a range of other engineering enhancements to ensure a smooth and accurate Doodling experience. Our most advanced 3D Printing Pen - designed for making accurate and creative 3d models and structures. The only limit is your imagination.
• [DESIGNED WITH COMFORT] Sleek and ergonomic design with curvature intended to fit your hand for the most comfortable 3D drawing experience on the market. The Advanced pen's "soft touch" surface is designed for optimal Doodling comfort. Features LCD display with buttons for loading / unloading and adjusting the temperature and speed, as well as 8 different speed options so you can regulate speed & flow for optimal control of line thickness while creating.
• [READY-TO-USE KIT] Includes 3 colors (15 meters) of PLA plastic, power adapter, step-by-step manual, and a free stencil guide. Just plug it in, heat it up and enjoy the unlimited fun of creating a three-dimensional masterpiece like a Pro. PLA is a versatile, easy-to-use printing plastic that is great for both first time and advanced users.
• [BEGINNER FRIENDLY] Plug the adapter into the back of the pen and choose your filament. The red light will turn on indicating warm up, this will take about 2-3 mins. Double click the forward button to start and feed the filament through the back of the pen. Once the filament has reached the nozzle of the pen, click forward to stop the pen. Press the forward button once to start; click once to stop. Once you have completed your design, press and hold the reverse button to retract filament.
• [SAFE & RISK FREE PURCHASE] Built in safety features, anti clogging features, and intititve controls ensure a seamless Doodling experience. 1 year guarantee and responsive customer service. Buy with 100% confidence. If there are any quality issues or you need getting started tips, please feel free to contact us and we'll be happy to help.

User questions & answers

Question:	How does it dispense filament
Answer:	Double click the forward button to start and feed the filament through the back of the pen. Once the filament has reached the nozzle of the pen, click forward to stop the pen. Press the forward button once to start; click once to stop. Once you have completed your design, press and hold the reverse button to retract filament.
Question:	How long does this pen retain a charge
Answer:	This pen does not use a charger. You can use any power adapter that is 3.95mm barrel, center positive and 5V at least 2amp.
Question:	What is pla or abs for 3Dpens
Answer:	PLA and ABS are the different types of filament (colored plastic) that the pen uses to draw. PLA is best for printing directly onto surfaces, and ABS is best used for drawing in the air as well as for first-time users. Both are designed to be easy to use and create a great print or 3D masterpiece.
Question:	Hi, we lost the charger. how do we buy another one? help
Answer:	This item does not use a charger. You can use any power adapter that is 3.95mm barrel, center positive and 5V at least 2amp.

Product features

Temperature Control

Use buttons to adjust temperature & LCD display to monitor true temperature.

Adjustable Speed

Choose from eight different speed options to regulate speed & flow for optimal control.

Design & Comfort

Features a sleek & ergonomic design for the most comfortable 3D drawing experience on the market.

Easy to Use

Built with a soft touch surface that is designed for optimal doodling ease.

Product description

Create, Draw, Doodle, Sketch, and Build in 3D with this affordable yet high grade 3D pen. The SCRIB3D P1 3D Printing Pen features a stepless speed function designed for optimal speed control no matter the task - whether slower intricate projects or faster infill work. The temperature of the P1 pen can be easily adjusted for ABS or PLA printing filaments; and the speed can be tuned up or down using the tactile slider switch on the side of the pen. This 3d pen set comes with a high quality 3D Pen, assorted colors of PLA plastic, a stencil guide with 6 free projects, and a 100-240V AC 50/60Hz adapter. As well as being easy to use and well engineered, the P1 pen is FCC, CE and RoHS-certified. Bring your imagination to life today, in 3D! Choose from multiple pack sizes of PLA plastic, or visit our Amazon store to try out our ABS filament. Works best with SCRIB3D Filament and with our 3D Design & Drawing Mat. How to use: Plug the adapter into the back of the pen and choose your filament. The red light will turn on indicating warm up, this will take about 2-3 mins. Double click the forward button to start and feed the filament through the back of the pen. Once the filament has reached the nozzle of the pen, click forward to stop. Press and hold the forward button or double click for a continous flow. Once you have completed your design, press and hold the reverse button to retract filament.

• [A GIFT FOR THE WHOLE FAMILY] Create, Draw, Doodle, and Build in 3D with this affordable yet high grade 3D pen. The new SCRIB3D P1 3D Pen helps improve spatial thinking, creativity and artistic skills. Great for quality family time and as a practical tool for making handmade gifts or decorations, or for everyday fixes around the home. The P1 Pen features a stepless speed function designed for optimal speed control no matter the task - whether slower intricate projects or faster infill work.
• [READY-TO-USE KIT] Includes either 3 colors (15 meters) or 10 colors (60 meters) of PLA plastic to keep you Doodling for ages, as well as a power adapter, step-by-step manual, and a free stencil guide. Just plug in, heat it up and enjoy the fun of creating three-dimensional masterpieces. PLA is a versatile, easy-to-use printing plastic that is great for both first time and advanced users.
• [BEGINNER FRIENDLY] Plug the adapter into the back of the pen and choose your filament. The red light will turn on indicating warm up, this will take about 2-3 mins. Double click the forward button to start and feed the filament through the back of the pen. Once the filament has reached the nozzle of the pen, click forward to stop. Press and hold the forward button or double click for a continous flow. Once you have completed your design, press and hold the reverse button to retract filament.
• [MULTI-FUNCTIONAL] The SCRIB3D P1 Pen is temperature adjustable to accommodate multiple types of filament: PLA (160-210℃, 320-410°F) or ABS (210-235℃, 410-455°F). Unlike other 3D printing pens, the P1 has an easy-to-use stepless speed slider, designed for optimal speed adjustment. Perfect for any task, from slow & intricate projects to faster infill work.
• [SAFE & RISK FREE PURCHASE] The P1's ceramic nozzle and premium motor ensure safety and high performance without clogging. Equipped with 2 minute auto sleep function after 3D doodling stops, anti clogging features, and intititve controls ensure a seamless Doodling experience. 1 year guarantee and responsive customer service. Buy with 100% confidence. If there are any quality issues or you need getting started tips, please feel free to contact us and we'll be happy to help.

User questions & answers

Question:	Have any of the children burned their fingers while using
Answer:	Kids being kids the answer is yes. This product should ALWAYS used with adult supervision. Finger guards included with some models would be the best and safest choice. Keep in mind that children are burned with wood burners, matches, candles, clothing irons, stove tops, lighters, hot liquids..the list is endless.
Question:	i bought this for an 11 year old. the box states: "adult use only. keep out of reach of children"...so which is it
Answer:	The tip is hot but I'd say a 11 year old could use it with out a problem.
Question:	What ages are this pen good for
Answer:	Great for ages 9+
Question:	does this have a proprietary charging port
Answer:	This device does not charge, there is no internal battery, it does use a standard 3.95mm barrel plug that goes into a standard 5V, 2A power plug Center positive. You can use any power adapter that is 3.95mm barrel, center positive and 5V at least 2amp (more amps will not hear the pen less and it will simply reboot due to lack of amps).

Product features

Adjustable Temperature

With just a 2-3 minute warm up time & LED light indicators, you'll be ready to create in no time.

Control

Ensure total control of temperature and plastic flow/ size by using the buttons and speed slider.

Comfort

Ergonomic buttons allow for ultimate comfort - even when working on large creations.

Easy to Use

Our removable nozzle ensures the continuous flow of plastic & seamless creation. Hold the pen at a 65 degree angle for best results.

• [ALL NEW DUAL DRIVE TECHNOLOGY] The world’s first in a 3D printing device. Featuring improved power, durability, and reliability for a superior doodling experience.
• [THE 3DOODLER APP] Get an interactive experience! The app is packed with dedicated easy to follow stencil section and step by step interactive instructions, receive badges for completed projects and photograph & share your creations directly on social media. The App is fully built on iOS & Android.
• [EASY TO USE] Just Plug the 3D Pen in, insert 3Doodler Create plastic, Wait for the 3D Pen to heat up and then you're good to extrude!
• [FREE 15 COLORS OF PLASTIC REFILLS & STENCIL BOOK] This 3D Pen comes packed with 15 different colors of 3Doodler Create plastic refills & a comprehensive activity guide book.
• [SMOOTH 3D DRAWING EXPERIENCE] Get the best 3D drawing experience by only using the best and safest non-toxic 3Doodler Create Plastic Filaments. The Create+ 3D Printing pen is compatible with 3Doodler Create 3mm PLA, ABS and Flexy Plastic only.

User questions & answers

Question:	Is this wireless
Answer:	No. It's not. We found a power pack for it from another vendor that makes it more mobile.
Question:	Will this work with the 3D doodler start
Answer:	It does not. The 3doodler start requires smaller
Question:	The description says 10 inch sticks but the product dimensions say 6.1x3x.4. which is correct
Answer:	The 3Doodler Create plastic is 10 inches in length and straight cut. Can we ask where did you get the 6. 1x3x4?
Question:	Does this filament fit 3doodler create plus
Answer:	Hi, yes this filament is used for the 3Doodler Create+ 3D pen. Thank you.

Product features

Everything You Need

The complete package! This 3D Pen comes packed with different colors of 3Doodler Create plastics & a comprehensive activity guide book.

Plastics Made In The USA

3Doodler Create plastic is safe and non-toxic. The Create+ 3D Printing pen is compatible with 3Doodler Create 3mm PLA, ABS and Flexy Plastic only.

Extra Templates

Doodle for hours with this 3Doodler booklet that includes a wide variety of creatives project templates for you to make!

Now with Dual Drive

Greater control of speed for different Doodling techniques, optimised temperature control for enhanced compatibility with different plastic types.

Easy as 1, 2, 3D

The latest version, 3Doodler Create+ 3D Printing Pen!

Extrude heated plastic that hardens almost instantly, so you can draw 3D structures, freehand or on stencils.

decorate, Fix & Hack

A handmade gift for a friend, a decoration for your next party, you'll be amazed by all the stuff you can make with the 3Doodler Create+. Or, if you're a DIY-er, this versatile tool can help you fix worn-out cables, improve a kitchen hook, and more. Now think of the possibilities.

Make Art, Design, Personalize

The world is your canvas. With over 70 colors at your fingertips in more than 3 different types of materials, the possibilities are endless. From whimsical masks to adorable figurines, modern jewelry to an entire runway outfit, what will you create?

• Unique 32 Colors: This Assortment with 4 Metallic Colors, 10 Transparent Colors and 18 Popular Solid Colors; These Various Colors is Best Choice for All 3D Drawing and 3D Art, It's Great Gift for 3D Printing
• High Quality: Our PLA Filament Diameter is 1.75mm, Premium Quality Controlled,Vacuum Package, No Bubble, Eco-Friendly, Safe For Kids
• Strong Compatibility: Universal Compatible with Various 3D Pens/3D Printers on market, While Not Fit for 3.0mm 3Ddooler Pen
• Extra Gift: 4 Silicone Finger Caps, It Support You to Make 3D Printing Much More Smoothly and Easily, It's a Great Start Kit
• 100% Warranty: We are Confident about our PLA Filament quality,Within 24 hours Response,100% Satisfaction Guarantee, Fit with Mika3d Metal 3D Pen and Mika3d Silicone Mat Perfectly

User questions & answers

Question:	Can pla filament 1.75mm be used in the 3doodler start pen
Answer:	Dear Customer, If the 3dooler start pen support PLA Filament, the printing temperature is around 180-190 centi degree; Also, the 3dooler start pen support the filament which diameter size is 1.75mm; Then it can use our 24colors filament very well. If the 3Doodler start pen can't support 1.75mm PLA filament, then our filament can't used in 3Doodler start pen Thanks
Question:	Can I use this with the 3Doodler starter pen
Answer:	dear Customers, I don’t think so, as our PLA filament diameter is 1.75mm, while as we know, the 3doodler 3D pen only support the filament diameter 3.0mm; Thanks Have a nice day
Question:	Will this work with a smartgear 3D pen
Answer:	Yes!
Question:	Does this work with Medoozy 3d pen
Answer:	NO. These PLA filaments DO NOT WORK with MeDoozy 3D pen. MeDoozy 3D pen works with PCL Filaments 1.75mm diameter only.

Product description

At MYNT3D we combine visionary engineering with cutting edge manufacturing to bring you innovative products that are built to tolerate a lifetime of use. Overbuilt from the highest quality, environment first materials, our products will stick with you to the end.

• The Basic 3D pen offers a user friendly entry into the world of 3D art for those not needing advanced features
• Compatible with the same widely available and inexpensive ABS and PLA that 3D printers use
• Extrude in slow, medium or fast speeds to create intricate designs or fill in large spaces
• Sealed nozzle and overbuilt gearbox ensure clog free operation
• Requires common USB AC adapter with at least 2A or 2000mA of power

• Everything you need to create like a pro: bundle complete with Super 3D Pen, PLA filament refills and mat kit
• Super 3D Pen: features stepless speed control for enhanced flow regulation, temperature adjustability for ABS or PLA and replaceable sealed nozzle design for clog free and long lasting operation
• PLA Filament Refills: Highest quality vacuum sealed PLA in colors blue, green, red, yellow, orange, pink, black, tan, brown and gold
• DesignPad: double sided silicone drawing surface with channels let you design and create perfect geometric shapes
• FreePad: custom formulated transparent drawing surface with ideal adhesion so you can trace your favorite patterns, drawings or create your own designs
• 1 year limited warranty and unlimited customer service access for tips, troubleshooting and anything else you need at [email protected]

Product features

MYNT3D Super 3D Pen

Draw, design, build, repair and more with the MYNT3D Super 3D Pen. Check out our projects and tutorials guide online to get your imagination flowing!

Based on the Professional 3D Pen

The Super 3D Pen uses the same gearbox and replaceable nozzle design as the Pro 3D Pen. It does not have the OLED display or discrete temperature adjustment. There is instead a temperature adjustment screw for switching between ABS and PLA.

Easy to use

Red light indicates power. Green light flashes for heating mode and stays lit for ready mode. And away you go!

Dial it in

The stepless speed slider gets you the perfect extrusion speed for your current task. Set it to a crawl for intricate details and power it up for larger fills.

• The Great Partner for All 3D Pens & Filaments: Suitable for all 3D Printing Pens on the Market. Create 3D masterpieces with High Precision.
• Double-Sided Use: The grids side of TECBOSS silicone mat is used for Precise Circles, Grids, Triangle, Rectangular, etc.; The smooth side is used for unrestricted creation.
• Eco-friendly and Safe: No paint, Non-toxic, No pollution. Made of high-quality silicone, heat resistance up to 260 °C. Inspire unlimited imagination and creativity without any harm.
• The Perfect Gift: Beautiful gift package. Suitable for children and adults, for 3D pen drawing beginner and 3D pen drawing expert artist! The best birthday/Christmas gift.
• Extra Bonus: Comes with 3 fun Christmas tree/symbol/aerospace template & 2 Finger Caps.

User questions & answers

Question:	what's the size
Answer:	5.8*6.8 in, very small, but it is really a good tool.
Question:	Is this mat compatible with my 3Doodler pen
Answer:	I’m pretty sure these mats are compatible with all 3D pens. They just provide a non stick surface the plastic extruded from the pen can cool on. My son loves these mats since they help him create shapes and straight lines. He can then use those shapes to make 3D objects.
Question:	How can I contact the seller to get 250 E-Stencils
Answer:	contact their email [email protected]
Question:	How about the pattern template on the 3D pen pad
Answer:	It's very interesting

Product features

Best Partner for Your 3D Pen Drawing Creation

Tecboss 3D pen mat suitable for all 3D Printing pens on the market. Create 3D masterpieces with High Precision. No paint, non-toxic, no pollution, made of high-quality silicone.

Suitable for All People

From kids to adults, from 3D Pen Drawing beginner to 3D pen drawing expert artist. Tecboss 3D pen mat will give them a wonderful creative experience!

Extra 3 Fun Template Bonus

Tecboss 3D printing silicone pen pad comes with 3 fun Christmas tree/symbol/aerospace template. Create your 3D art and draw your dream now !

Tecboss 3D Silicone Pen Mat is Great Drawing Tool for Your 3D Pen!

It's suitable for all people, from Kids to Adults, From 3D Pen Drawing Beginner to 3D Pen Drawing Expert Artist!

This Design Mat Include Multi-Shaped Draw Template: Circles, Grids, Triangle, Rectangular, etc; To Create and Draw 3D Objects Precise.

Mat Size: 5.8''x7.8'' This Mat Heat Resistant up to 260℃.

Suitable for All Types of 3D Pens and 3D Filament It's Great 3D Pen Drawing Tool for Your Kids, Great Gift for Your Friend!

• Enjoy Classic 10 colors: This 3D filament replacement package comes with 10 beautiful colors to give you more options when creating your artistic masterpiece. A great gift set for your children and art lovers to have fun with crafts and drawing.
• Eco-Friendly: The 3D PLA pencil prints without odor, smoke, non-toxic and respectful with the environment. It is the safest option for children's crafts and adult arts.
• ULTRA-SMOOTH: Tecboss 3D printing pencil filament is made of high-quality material, which is always round, without oily residues or breaks. It can produce bright lines and colors without bubbles.
• Wide Compatibility: Works with any 3D printing pen with PLA filament of 0.069 in (1.75mm). The temperature range of this product is 338.0 ° F-374.0 ° F.
• Total 160ft. Not Fit for 3.0mm 3Ddooler Pen.

User questions & answers

Question:	Does this work for the Scrib3d
Answer:	Yes
Question:	Will these refills work with all 3D pen
Answer:	If your 3D pen uses 1.75mm filament, these will work well
Question:	The colors listed in the description do not match the colors in the pictures. What colors did you actually receive
Answer:	My colors don't match these colors suck
Question:	Is the PLA recyclable
Answer:	yes, PLA is considered a #7 (other) recyclable... however since it probably won't have the recycle symbol on it you should try to get it to your local Materials Recovery Facility (MRF) for recycling 👍 hope that helps!

Product features

TECBOSS 3D Pen PLA Filament 1.75mm High-Precision Diameter 3D Pen Refills

High-Precision Diameter PLA Filament

The 3D pen filament is made of PLA material to ensure no-smell, non-toxic and fast forming in the process of your 3D printing creation. 1.75mm high diameter accuracy keeps your 3D printing smoothly and easily.

Widely Compatibility

Works with any 3D printing pen/printer with PLA filament of 1.75mm. (Not Fit for 3.0mm 3Ddooler Pen). The temperature range of this product is 338.0 ° F-374.0 ° F.

A Great Option for Your Artistic Masterpiece

Tecboss 3D printing pencil filament is always round, without oily residues or breaks. It can produce bright lines and colors without bubbles. A great gift set for your children and art lovers to have fun with crafts and drawing.

Product description

Inspire the infinite the imagination and creativity With Larger Size 3D Pen Mat!



√Perfect for All 3D Pens & Filaments: Suitable for all types of 3D printing pens and filaments. Create 3D masterpieces with high precision. Offer great learning areas for beginners.

√Large Size Mat: 41.5 x 27.5 x 0.3cm. The foldable mat has different geometric, pets, technology shapes, which makes it easier to make perfect shapes and lines.

√Multi-shapes Templates: This updated version 3D pen pad has multiple-graphic templates and a larger creation area, make it fun for young beginners with a 3D pen, which is also space-saving.

√Safe Material: Made of high-quality silicone, heat resistance up to 260 °C. Protect your desk from being burned when using 3d pen. Ideal for kids, beginners, 3D pen artist.

√4 Finger Caps Included: Comes with 4 free gift finger protectors, prevent your fingers from scald, especially for the children. The best birthday/Christmas present!



Specification

Material: Silicone

Color: Blue

Size: Large



Product Included:

1x Foldable 3D Pen Mat

4x Finger protectors



Warranty:

1 Year warranty. Any questions, please feel free to contact us.

• √Perfect for All 3D Pens & Filaments: Suitable for all types of 3D printing pens and filaments. Create 3D masterpieces with high precision. Offer great learning areas for beginners.
• √Large Size Mat: 41.5 x 27.5 x 0.3cm. The foldable mat has different geometric, pets, technology shapes, which makes it easier to make perfect shapes and lines.
• √Multi-shapes Templates: This updated version 3D pen pad has multiple-graphic templates and a larger creation area, make it fun for young beginners with a 3D pen, which is also space-saving.
• √Safe Material: Made of high-quality silicone, heat resistance up to 260 °C. Protect your desk from being burned when using 3d pen. Ideal for kids, beginners, 3D pen artist.
• √4 Finger Caps Included: Comes with 4 free gift finger protectors, prevent your fingers from scald, especially for the children. The best birthday/Christmas present!

• 【320 feet in total, 16 colors 20 feet each color】 16 colors PLA filament to scribble your 3D artistic masterpiece idea. A great gift set for your kids and art lover to have fun with crafting and drawing.
• 【1.75 mm Filament, compatible with MYNT3D】 Universal compatible with most 1.75 mm 3D pens and printers(Dimensional Accuracy +/- 0.05 mm).
• 【Non-toxic and Safer to kids】 Compared to ABS, PLA Filament is Non-Toxic and safer to kids.
• 【Free-Ebooks】 On the seventh day after the parcel has been sent out, we will send the password and website of the E-books to every customer who ordered dikale 3d pen filament. We only can contact you from "contact buyer" button on the order details. However, there is no "contact buyer" button for some orders. So if you haven't received our email, please contact us
• 【TRUSTWORTHY MERCHANT】 30 Days Hassle Free Returns and 24-hour response service are friendly offered. We stand behind the quality of everything we sell. If you are not entirely happy, please send email to us.

User questions & answers

Question:	I still have not received the password for the 250 stencils ebook and it has been over seven days. I purchased two, what can you do to help me
Answer:	Mine came with the product papers although to be honest my kids have never used it. They just create their own stuff.
Question:	Does this work with a 3Doodler
Answer:	It doesn't fit 3Doodler pen all models because it is too thin. 3Doodler uses 3 mm filament. This filament work with all 3d pens which uses 1.75mm diameter
Question:	Does this work for any 3D pens
Answer:	Hi, You can use this 3d filament for any 3d Pens that works with 1.75mm refills. Except for 3doodler (all models). Since the 3doodler pens work only with refills with a diameter of 3mm.
Question:	Can I use this in a 3d printer
Answer:	Yes, you can, as long as your 3D printer handles a 1.75 mm filament. Most of the printers do. But you’ll need to get a spooler for sample filaments. There are plenty on Thingiverse!

Product description

With the new 3Doodler start your creative kids can finally bring all of their wonderful and imaginative ideas to life in 3D. This kid-safe 3D printing pen melts plastic that cools and hardens rapidly, allowing kids to literally draw in the air!

• [THE ONLY CHILD-SAFE 3D PEN] Designed with no hot parts, completely safe for kids aged 6+. Pen nozzle and plastic can be touched with no burn risks. Uses only the safest 3Doodler Start plastic filaments.
• [NEW & REFINED] The 2020 edition of the 3Doodler Start features refined extrusion gears for a smoother 3D Drawing experience.
• [STEM LEARNING AT HOME] As a tactile learning toy, the pen inspires creativity, design, planning, building and spatial understanding.
• [PLASTIC MADE IN THE USA] The 3Doodler Start uses a proprietary child-friendly PCL plastic made at our production facility in Ohio.
• [NEW 3DOODLER APP] Get an interactive experience and doodle right on the screen using your 3Doodler Start! The app is packed with easy to follow stencil section instructions!
• [THE COMPLETE 3D PEN KIT FOR KIDS] Each box includes 3Doodler Start 3D Pen, DoodlePad/Doodlemat, 2 Mixed-color Packs of Start plastics (48 Strands), Micro-USB Charger & Activity Guide + a ton of creative potential. Comes in a certified & sustainable brown packaging!

Product features

Everything You Need

The complete package! This 3Doodler Start 3D Pen comes packed with different colors of 3Doodler Start plastics & a comprehensive project booklet.

Plastic Made in USA

The 3Doodler Start uses a proprietary child-friendly PCL plastic. The Start Plastics have all been subjected to the strictest standards of safety testing.

Projects Included

Enjoy doodling for hours with this 3Doodler Start booklet. Includes a wide variety of fun creatives project templates for the whole family!

Possibilities Are Limitless

Use the Activity Guide or hundreds of free stencils and tutorials on our website to make your own glasses, helicopters, masks and more.

Easy & Fun

3D art made easy for kids! The plastic hardens rapidly allowing kids to literally create anything they can think of in 3D.

Safe to Use

The Only Child-Safe 3D Pen. The 3Doodler Start 3D Printing Pen is Designed with no external hot parts, using low-heat using non-toxic plastic, completely safe for kids ages 6-13.

Fun Learning At Home

The 3Doodler Start can help encourage creative endeavour and keep your child entertained at home for hours! As tactile learning toy, the 3Doodler Start inspires creativity, design, planning, building and spatial understanding.

Makes STEM Education Relevant

The 3Doodler Start develops an open-ended approach in teaching how to draw in 3D, making it more a more active and rigorous activity for students! Drawing in 3D presents difficult concepts, visually and easier to understand.

Kids Love 3D Drawing

Kids will be fascinated and enjoy 3D drawing! It will spark their imagination as soon as they pull it our from the box and start creating! The 3Doodler Start 3D Pen allows children to express themselves through the power of creativity and play.