13 best corer cutters

Product description

Paper Corner cutter work like punch from Japanese goods and stationary brand Sun star, corner cut for R3mm, R5mm, R8mm

• Sun star Kadomaru Pro Corner Cutter
• Paper Corner cutter work like punch from Japanese goods and stationary brand Sun star, corner cut for R3mm, R5mm, R8mm
• Model: S4765036

User questions & answers

Question:	Does this work on thin sticker paper? I've tried several different punchers and my sticker paper gets stuck
Answer:	There’s an inner lining that MAY make this possible but I would fear that water would leak through and get the foam inside wet. I wouldn’t recommend using it outside. The outer lining has a velvety feel
Question:	Will this cut through cardstock that is folded? I need to make wedding fans and want to round the corners
Answer:	hi! It's 3x4. due to packaging it looks like that. Once the inside foam is moved around it is a thick mat thats works well
Question:	Will this cut 10 mil thick laminated paper
Answer:	Yes very easy, especially if you put them in the carry mesh bag that comes with them
Question:	Which is the maximum thickness that it can cut? We need to cut a 2mm soft wood
Answer:	I would either do it by hand and let them air dry or even tossing them in the washer on a light setting. Maybe stick them together so they all aren’t bouncing around. I couldn’t see it being any different from washing shoes.

• Thank you very much for purchasing our products. We are using the following questions to answer
• 1. This type of embossing device requires high quality paper. please Use 160G-220G paper jam. If your paper is too thin. Please use 2-3 layers
• 2. Please don't use moist damp paper. This will cause not smooth around those sides.
• 3.Use after a period of time. Please use cooking oil. Apply a knife. Allow the cutter to be fully lubricated. This keeps the cutter sharp
• Thank you again for coming. Our goods are all hand-made tools. If there are any problems in the shopping. Please communicate with us. Thank you. I wish you a happy shopping in the Amazon. Thanks

User questions & answers

Question:	does it cut so from curved edge to straight edge it is smooth transition
Answer:	Our 4'x8' and 4x10 mats both come with Velcro borders so that you can attach them to other mats. The smaller sizes do not have these borders. Thanks!
Question:	Will it cut laminated dividers or greeting cards? Thanks
Answer:	Hello Rebecca, Thank you for reaching out to our customer support at [email protected]. If you have any further questions please let reach out again! Best regards, D1F
Question:	I need a corner cutter with reduced effort, is this hard to push down
Answer:	Yes, the mats have velcro installed on all four sides so that they can be attached length or width wise.
Question:	will this work well with card stock
Answer:	I think it would depend on how hard to hit it. Sorry I can't be more specific. It's cushioned but it's pretty firm.

Product description

Over 90 years ago, William R. Hiller and his two sons began building a reliable bookbinding business. The old Provo book Bindery has emerged as one of the best bookbinding resources in the United States. Hiller bookbinding aims to keep memories safe and secure outside of photo albums because people have always sought ways to stay in touch with past history and past memories started production of the first album. The advent of the fine art of scrapbooking and paper craft continues to increase the need for high quality, functional and creative craft products and tools. In 2014, We R Memory Keepers joined the American Crafts family of brands. To date, We R Memory Keepers manufactures the most innovative, functional and high quality products loved by engineers around the world.

• Punch - WR - punch boards and punches - 3 way corner rounder
• American long-established stationery Amari Kankurafu Long-established stationery Fashionable stationery
• We R Memory Keepers Punch Board & Punch-3 Way Corner Rounder

User questions & answers

Question:	Does this work well with regular copy paper or book pages
Answer:	I am pretty sure it would cut it at first. The problem with cutting stickers is it tends to gum up the cutter (my experience with other cutters not specifically this one). If this happens, it might be difficult to clean. Just a thought. Not sure if this would be the case here.
Question:	Does this work on laminated paper
Answer:	No. Mine wouldn't even cut through one piece of cardstock. Defective.
Question:	Did anyone get the Punch board
Answer:	I used it to cut 10 mil laminated paper successfully on the M and L sides. I could not get it to cut 10 mil laminated paper with the "S" side.
Question:	How to sharpen the puncher
Answer:	It most definitely won't cut a 2mm. soft wood. It's a good & precise tool, but only for light duty use. - It will handle business card thickness cardstock, but nothing more. - I have since obtained a Zutter Round-it-All Heavy Duty Corner Rounder to cut the 1/32" card I use. The cut isn't as clean as I would like, but it beats doing it by hand with scissors. Martha Stewart makes an inexpensive heavy-duty corner rounder that I would like to try, but they don't say what the radius of the cut is. (I require a 1/8" radius, equivalent to a 1/4" diameter.) If you search corner rounder on eBay, you will see many varieties from light duty to heavy duty table mounted ones.

• This machine is ideal for cutting business cards, photos, booklets, notepads, photographic film, plastic cards, magnet sheets, etc, even can easily cut 30mil aluminum sheet.
• Applications: 1. Professional printing companies. 2. Typing and photocopying shops. 3. Professional banner processing factory. 4. Wedding and Celebration companies.
• Feature: All metal ,heavy duty construction Long handle, heavy duty base, easy to operate Hard Premium carbide blade, standard size R6, R10
• Parameter: Cutting Die Cutter R6(1/4"); R10(3/8") Max. Cutting Thickness: 1-3/16" (30MM) Shipping Weight: 18Lb (8.5Kg) 3 Size Die Cutter: R3; R4; R8

User questions & answers

Question:	Can this cut .025" Aluminum sheets
Answer:	I have had no problems with getting the paper or what ever I’m cutting to have a smooth transition from straight to curved. I did practice with it on several types of paper before actually using it, so I could see how it looked. I have personally been pleased with how this corner cutter works.
Question:	Looks like the type of heavy-duty yet not too expensive thing we need for cutting polyethelene (hdpe) sheets... but really need 5/8" (r
Answer:	yes it will cut greeting cards. Laminate maybe a little harder but i think it could if it isn't too thick,
Question:	Can this cut 3mm pvc
Answer:	It isn't hard to push down, but I was disappointed in it because it doesn't trim regular weight paper well and even with card stock, you have to be super careful to fit it in perfectly which isn't easy. I wanted to love it, but I don't
Question:	Can the die be reversed to cut notched corners
Answer:	Up to a certain weight of paper. Anything 120# and up is gonna be difficult (16pt and up). We've been using it on laminated 100# Cover stock in our print shop. It takes some "elbow" (well, finger) grease doing that, but it gets the job done.

Product features

INTBUYING All Metal Heavy Steel R6 R10 Corner Rounder Punch Cutter Stack Paper Alumium+ R3 R4 R8 Blades

"Customer first, quality first" is our constant management principle.

It is our relentless pursuit to help you create home business and generate revenue through our machines.

Through our efforts and excellent quality machines, it is a great thing to make more people's lives better.That's what we've been doing.

Item Include:

• Manual Corner Rounder Punch * 1 set
• R3/R4/R6/R8/R10 * 1 set

3CM

• Round cutting thickness up to 3 cm;
• Small machine, but with great energy.

Change Blade

• Comes with a replaceable knife holder, easy to disassemble；
• With 5 size of blades: R3/R4/R6/R8/R10.

Lengthen Handle

• Stainless steel Lengthen Handle
• Plastic round head, easy to hold.

Lifting Support

• The lifting support column is equipped with a spring, which is powerful in cutting；

Adjustable board

• Equipped with adjustable board;
• Adapt to multiple sizes, more convenient and fast.

Paper Press

• The paper press design makes the paper cutting process more stable and accurate.

Product description

4mm corner rounder punch use to trim and round the sharp corners. Easy to use & works well for all kinds of photos, paper, pictures, name cards, etc.

• Corner rounder punch use to trim and round the sharp corners
• R4 4mm corner rounder trim paper punch card photo cutter tool
• Stainless steel blade ensures precision cutting neat and clean look
• The bottom of the lid can be opened, easy to clean the wastepaper
• Easy to use & works well for all kinds of photos, name cards, etc

User questions & answers

Question:	Will it cut card Stock
Answer:	Yes it does, I make book markers and laminate them. It works great!
Question:	Will it cut plastic file folder
Answer:	It wasn't marketed with a punch board when I bought it, so I just got the punch.
Question:	How many sheets of paper can it be cut
Answer:	You can punch through one or more layers of aluminum foil a few times to sharpen it.

Product description

Paper Corner cutter work like punch from Japanese goods and stationary brand Sunstar, corner cut for R5mm

• Sunstar Corner Cutter Kadomaru-kun Pink
• Paper Corner cutter work like punch from Japanese goods and stationary brand Sunstar, corner cut for R5mm
• Model: S4765010

Product description

Fiskars 3-in-1 Corner Punch offers three complementary corner designs to make embellishing your next project easy and fun. Simply rotate the design you like into position, slide the paper in and push the button. You can use the same design for each corner or switch designs for whimsical variety. It punches cleanly every time, and the compact size makes storage and transportation easy.

• Ideal for adding decorative corner designs to cards, invites, scrapbook pages and other papercrafts
• Three complementary corner designs offer creative versatility
• Punches cleanly every time for consistently great results
• For best results, use on 65-lb. cardstock and lower
• Lifetime warranty

User questions & answers

Question:	best border punch
Answer:	Soory to you but we don't have 5/8" size of corner cutter. Max size is R10. Best regards
Question:	i know this is used for square stock cards but I'm wondering if you can use this with circle shaped card stocks and punch it circularly
Answer:	Yes , it could handle 3mm PVC card.
Question:	Can this be used to make round corners on things that have been laminated
Answer:	Thank you for being interested in our product. We are so sorry to tell you that our product just can cut a convex corner.
Question:	How large are the corners
Answer:	Yes, it works well with regular copy paper

Product features

Fiskars 3-in-1 Corner/Border Punch, Lace, Blue

Our 3-in-1 Corner Punch offers three complementary corner designs to make embellishing your next project easy and fun. Simply rotate the design you like into position, slide the paper in and push the button. You can use the same design for each corner or switch designs for whimsical variety. It punches cleanly every time, and the compact size makes storage and transportation easy.

Features

• Ideal for adding decorative corner designs to cards, invites, scrapbook pages and other papercrafts
• Three complementary corner designs offer creative versatility
• Punches cleanly every time for consistently great results
• Conveniently sized for take-along projects, crops and storage
• For best results, use on 65-lb. cardstock and lower

Product description

Our heavy duty steel 3mm radius corner rounder punch cutter with coated grips has become a desirable hand held tool for wargame counter clippers and crafters alike. This small radii is approximately 3/32 inch and removes just enough corner material to eliminate sharpness. Tool weighs under 11 ounces & cuts up to approx 1/16" thick (70 mils) paper, PVC cards or laminated paper material. ★★★★★

• Has coated hand grips for comfort
• Weighs only 10.25 ounces
• Heavy Duty Steel construction cuts plastic or paper, but NOT SHEET METAL
• Cuts up to 70 mils thick materials (approx 1/16")
• Look for Authentic Oregon Lamination Premium Punches ★★★★★

User questions & answers

Question:	Do you have a 4mm version of this corner rounder
Answer:	I used it to round the corner on a magnet I had attached a picture...and it cut it nicely ...I would think it would work on card stock .
Question:	How do I measure whether i need a 3mm or 2.5mm? What do i measure in my cards
Answer:	It might cut about five and after that it will become dull and not cut anymore. This item quickly becomes dull and requires a lot of force.
Question:	How thick of stock will it cut? I need to cut 1/8" crafting foam
Answer:	I returned this product. It is teeny and I couldn't get it to cut one piece of paper.
Question:	Will this cutter cut through woven glass? I have 0.02" thick plastic and woven glass film. I am trying to make some nice samples with round corners
Answer:	I have used it for .030 aluminum and it works fine. Never tried .025.

Product description

1:Turn the button to adjust the depth of the edge at any time

2:If you are the beginner or use this product for the first time, we recommend that you use the product to gradually increase the depth of the planing angle from shallow to deep, do not stop during the angle planing, so that the surface of the wood after you plan the edge will be smoother

3: The hexagonal wrench can solve the demolition problem for you, and replace the cutter head according to your need.

Name: Woodworking Chamfering Planer

Color: Black/Red

Product Size: 6.1 X 2 X 0.8inch

Product Weight: 0.85lbs

Packing Size: 7.68 x 4.33 x 1.3 inches

Packaging Weight: 1.1 pounds

Package includes: The package contains 1 chamfering machine, 1 hex wrench, four head sizes, 1/8", 3/16", 1/4" radius, 45 degree chamfer.

• 🔧【Properties】: The sharp edges of wood products can easily damage the appearance of the product and hurt you, you can soften the exposed edges of your work by chamfering them, and edges can be quickly removed by angle planning. There are four types of heads 1/8 ", 3/16 "or 1/4" radius or 45° chamfer, you can replace it as needed. It comes with double-sided horizontal bubble, one side vertical, one side horizontal, so it is easy to observe adjustable level.
• 🔧【Materials】: Products are made of metal and ABS with good compressive strength, high-speed steel blades, sharp cutting, wear-resistant, heat-resistant and corrosion-resistant.
• 🔧【Convenience】: Wooden planer with the size of 6.1 X 2 X 0.8 inch is easy to disassemble and assemble, comfortable to hold, simple to operate, you carry and use it at any time and it does not take up too much space.
• 🔧【Applicability】: This product is used for wooden furniture crafts and handmade DIY wooden works, and it is suitable for woodworking beginners and professionals, it can also be used as a men's holiday gift.
• ✉【Services】: We have 24-hour online customer service staff so that your questions can be solved quickly, and our products offer 180-day returns to provide you with excellent service and a pleasant shopping experience.

Product features

Chamfer Plane for Wood

Especially designed for trimming and chamfering all kinds of wood, smooth planing surface, high efficiency.

Great help to your own creative and unique woodworking project.

Fine grinding of knife edge

Sharp and wear-resistant, can be disassembled and polished.

Adjustable depth

Adjust the depth of the plane as needed.

It comes with double-sided horizontal bubble

One side vertical, one side horizontal, so it is easy to observe adjustable level.

The grooved design is ergonomic

Use labor saving and high efficiency,comfortable to hold

SOLID WOOD

MDF

PLYWOOD

PARTICLE WOOD

With four types of cutter heads

Size is 1/4", 3/16", 1/8" radius, 45 degree chamfer,you can replace it as needed. The cutter head can be removed and polished

Note

During your use of 1/8", 3/16", 1/4" radius cutter heads, we recommend that the maximum depth of the cutter head does not exceed the cutter slot.

wood planers for woodworking

1. Turn the button to adjust the depth of the edge at any time.
2. If you are the beginner or use this product for the first time, we recommend that you use the product to gradually increase the depth of the planing angle from shallow to deep, do not stop during the angle planing, so that the surface of the wood after you plan the edge will be smoother.
3. The hexagonal wrench can solve the demolition problem for you, and replace the cutter head according to your need.

Product description

OWDEN professional 3 Pieces leather belt end cutter punch set ,Triangle Shaped,Leather strap punch tool set ,3 Sizes leather tool.

• Owden professional 3 Pcs leather belt end punch set. (Triangle shaped) The set includes 3 sizes of tools. It can make a perfect triangle at the end of different width leather belt .
• Three size: S,M,L . The “S” suitable for leather straps less than 38 mm in width and with a small radian ending, The “M” suitable for leather straps less than 38 mm in width and with a midium radian ending, The “L” suitable for leather straps with a width of 38-48 mm with a lager radian ending .( See pictures)
• The product is made of high hardness alloy steel with handle for anti-slip treatment. Cutting leather is very sharp and clean.
• The three sizes of this set of tools are compatible with all leather strap made into a triangle work.
• Three tools have a beautiful gift box package,Your friends will love it . Choice OWDEN.

User questions & answers

Question:	I'm confused! Are they sharp or not? Will they cut through 8-9 ounce leather ends or not
Answer:	It is a good border punch
Question:	How do you sharpen
Answer:	Kinda like round hole and square peg
Question:	What kind of press can I get to use with these so I can cut belt ends
Answer:	no, it work on thin paper
Question:	What are the radius measurements for the triangle cutters? They look like they would be perfect for rounding wallwt corners
Answer:	Not too large, about 1.5 cm or less

Product description

This heavy duty hand held corner rounding tool with 3mm radius weighs under 14 ounces & cuts up to approx 5/64" thick (75 mils) paper, PVC cards or laminated paper material. 3mm radius is approximately 1/8 of an inch. Has large steel cutting blade and extra wide side guides to make seating your sheet simple and efficient. This has become the tool of choice for many game counter clipping users. This radius is typical on the corners of most credit cards in your wallet.

• Has extra wide steel side guides making positioning easy
• Has large steel cutting blade to reduce user effort
• Capable of punching up to 75 mil PVC cards
• Flat bottom design allows user to rest this tool on a surface during use
• Look for Authentic Oregon Lamination Premium Punches ★★★★★

User questions & answers

Question:

Is this good for rounding 10 mil laminating sheets post-lamination

Answer:

I cut 10 mil hot laminating pockets after they've been through the laminator with no real problems.I've been unsuccessful rounding 22 lb paper and even light card stock. All the cutter has done was partially cut the paper and bend the rest of the corner over.I think it will cut the reinforced plastic with no problem. You'd need to make a fast cut and not a slow pressure. Any kind of plastic bodied cutter would not be a good way to go because the plastic body of the cutter is too flexible.

• 3 in 1 Corner Rounder Punch: Create perfectly finished paper crafts or scrapbooks with 3-way corner cutter. Designed to punch three different corners, this corner punch is the perfect tool for giving some extra vitality to your creations.
• Cuts 4mm 7mm 10mm Corner Radiuses: This compact corner rounder cutter 4mm 7mm 10mm corner radiuses, which are great for paper craft projects. MyArTool Corner rounder small and sturdy design fits perfectly in your hand and makes for easy to storage. The corner cutter will give you 4mm 7mm 10mm size rounded corners.
• Durable and Sturdy Corner Cutter Rounder: The durable and sturdy plastic housing is well processed, which is burr-free and smooth for max comfort and longtime use. Stainless steel cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance.
• Widely Application Corner Cutter: It is simple to use and will make crisp, flawless cut-outs from cardstock, scrapbook paper, vellum and more. Suitable for cutting paper, photographs, scrapbooking, business cards or gift card. Small corner rounder punch is suit for using in office, school, home and photo studio.
• Easy to Operate and Simple to Use: Choose your desired material and place it into the slot. Simply push the corner of your paper inside until its properly lodged against the guides and press the handle down. The corner is now accurately and sharply rounded.

User questions & answers

Question:	Does it cut 10 mm thick laminate
Answer:	I am not sure. I have not tried to cut such a item. However, I did place a thick sheet of plastic that is not so flexible and a pretty thick restaurant menu just to see if I could provide an answer, and it provided a clean cut. I was only able to place one sheet in the gadget, and I was able to go back to paper with no problem. I hope this helps. Take care.
Question:	How do you clean the cut pieces out of the machine
Answer:	I shake the cutter after each punch and sometimes have to blow at it a little and the pieces come loose. It's important not to let the pieces build up.

Product features

MyArTool 4mm 7mm 10mm 3 Way Corner Rounder Paper Punch

This compact corner rounder cutter 4mm 7mm 10mm corner radiuses, which are great for rounding corners on laminated documents, cartoons, photos, paper, gift card. MyArTool Corner rounder small and sturdy design fits perfectly in your hand and makes for easy to storage. The corner cutter will give you 4mm 7mm 10mm size rounded corners. You can round corners quick and easy using this corner punch.

STEP 1

1. Insert the edge of the paper

STEP 2

2. The sharp corner must be placed in the vertex nipple

STEP 3

3. Press the handle to cut

Product description

3-in-1 corner rounder, 4mm/ 7mm /10mm cutting size, uses to cutting sharp corners.



Features:



👍Metal cutter, neat and smooth cutting, no burr.



👍Lever handle design, easy to use and labor saving.



👍Mini corner trimmer, light and portable, convenient to take along.



👍Suitable for business card, greeting card, photo paper, stamp, laminating pouch, etc.



Specifications:



Color: Blue



Material: ABS



Cutting Radius: (4mm/ 7mm /10mm,3 in 1)



Item Size: 2.8 X2.4 X1.4 IN



Packing :



1 * Corner Rounder

• ✂【Durable&Sturdy】Stainless steel precision-cut blades is smooth,Round corners Clipping quick, Corner rounder is strong and handy craft tool.
• ✂【Lightweight and portable】Well-made handy little punch,only94.7g,(Punch Size:4mm/7mm /10mm)
• ✂【Widely Application】Perfect for adding a professional finishing touch to cutting art hand-making , photographs, scrapbooking DIY, business cards or gift card.
• ✂【Easy to Use】simply push the corner of your paper inside until its properly lodged against the guides and press the handle down.❗❗❗Note:After each punch,It's important not to let the pieces build up.
• ✂【After-sales service】If you have any questions about the product, please contact us via email. We guarantee to reply within 48 hours.