12 best mini heat gun for shrink tubing

• 🎁Special gift for families or friends🎁
• 🎁【High Power】 Heat gun for epoxy resin can reach at about 350℃/662℉ easily in seconds with 350W high power which can make the work more quicker and efficient.
• 🎁【Overheating Protection】 Heat gun for crafts will not get smoke or burning after long time using because of nickel-chromium heating wire structure and mica bracket, which can speed up heat dissipation and extend the service life.
• 🎁【Well Made Design】 Our portable heat guns is lightweight(0.6 lb) heat tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders; Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly.
• 🎁【Easy and Long Endurance】 Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project.
• 🎁【Wide Application and Product Service】 With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help.

User questions & answers

Question:	Does work well with heating up 3m tape to stick better on car accessories please let me know asap
Answer:	It stays on it's very well, I was surprised. That's how I set down between putting heat shrink on wires. It also comes with a curved nozzle attachment that helps direct the heat around a pipe. I used it to bend a 1 inch pvc water pipe. (Though, I would imagine, you might wanna bend the attachment into a sharper curve for PC cooling pipes.)
Question:	Would this melt soft plastic for bait making
Answer:	If you mean to use it for heat shrink tubing, yes. It's not designed for soldering of course, and it does run on two heat settings. The high setting is 1500 watts as I recall (12.5 amps) and the coil glow orange. However there is a thermal protection (reed type switch) that breaks the curcuit after about 90 seconds when it's on high (without any attachments) If you need to sustain a high setting I recommend the Wagner because it will run on high as long as it is on until the plastic case melts. It also has a tendency to melt things touching the nozzle, especially the cord when accidently thinking it's cool enough to set it down somewhere. Low settings 750 watts, no problems. 200 degrees at 1 inch. High is about 390 to 425
Question:	The description says it has high air flow. Is it good for tiny surface mount electronics or would it blow the components away
Answer:	Shrinking packaging wrapEnclose and seal the product in the shrink wrap and then poke a small hole in the wrap to allowtrapped air to escape. Move the heat gun back and forth across the package until the shrink wrap hasevenly shrunk.
Question:	Is it comfortable in the hand for long periods of time
Answer:	Yes. But just like any other smartphone screen you should do it by using it on the low setting.

Product features

350W and 662℉（350℃)

Strong power (350W) ensures it can quickly heat up to the maximum temperature 662℉(350℃) in seconds.

Superior Quality

With Nickel-chromium heating wire structure&mica bracket, it can maximize heat loss.The heat vents can decreased the internal high temperature and extend the life.

6.56Ft (2M) Long Cable

The hot air gun has 6.56Ft (2M) extended long cable, more than other competitors.

Lightweight Design

Mini lightweight fuselage so that you could hold it as easy as hold a pen.

Nozzle Accessory

The heat gun comes with a nozzle accessory, which can protect other parts of your work will not influenced by the hot air but only blow to the part you need.

Perfect for Card Making

This embossing heat gun is with 300 L / min air speed, which melts embossing powders nicely without blowing them all over the paper.

Wide Application

The mini heat gun is perfect for DIY, embossing powder, electronics repairing, heating shrinkable film, clay, rubber stamp, quick-drying coating, catalytic adhesive, PVC shrinkage of packaging.

Alerts!

• Do not touch the nozzle immediately after heating.
• Do not let the child use the heat gun alone.

Start your colorful DIY life!

Enjoy the happy time with your children, family or friends!

Product description

The HT400 Heat Tool is a versatile heat gun for home, workshop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate crafting and DIY related projects. Its simple, pencil-like design features a dual high (680°F/360°C) and low (450°F/230°C) temperature setting that allows you to complete countless projects. Some project ideas include embossing cards and other crafting projects, repairing electronics or wire, shrinking electrical tubes, shrink wrapping presents, making jewelry and more. The heat gun also has a retractable stand, allowing for hands free operation when your projects requires two hands. Whatever your next project that requires heat, the HT400 is the tool for you

From the Manufacturer

The HT400 Heat Gun gives outstanding performance in a small package. The heat gun is ideal for crafts and hobbies. Use it to apply embossing powders, applique and shrink wrap. Remelt adhesives and form plastic material. It is also great for applying electrical shrink wrap.

• DUAL TEMPERATURE HEAT GUN: The HT400 heat tool is a durable, versatile heat gun for home, workshop, craft and hobby projects. It features dual high 680°F (360°C) and low 450°F (230°C) temperature settings
• HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and crafting projects
• MANY PROJECT USES: The Wagner heat embossing gun can be used to apply heat shrink tubing around wire, emboss cards and crafting projects, remove stickers, shrink wrap presents, make jewelry and more
• PRECISE CONTROL: The small size makes the HT400 heat gun great for getting into hard-to-reach places and concentrating high heat on small areas
• COMPACT DESIGN: The unique angled design offers three operating positions (palm, pencil and hands free), ensuring the best fit and feel for your project

User questions & answers

Question:	Is this heat gun the same one as the Hero Arts heat gun? Thanks
Answer:	I don't think so.
Question:	Hello guys I need to know if it is working V120 or V
Answer:	You simply pull the clip down in the direction the cable exits the camera module, and the same on the raspberry pi, they have pretty much the same clip on both the pi and the camera module, at the side of the socket where the cable is inserted there are plastic tabs, carefully pull both sides down away from the camera module to release the cable.
Question:	removing old paint
Answer:	We also offer a 2 ft version, see ASIN B00M4DAQH8. I do not believe there is a 3 or 4 ft version.
Question:	I seen this has a 3-prong plug. If I get a 2 prong adapter and reverse polarity, can I use it to cool things down
Answer:	It’s 12 in long at least. Definitely not 2

Product features

Versatile Heat Gun for Home and Crafting Projects

The HT400 Heat Gun is perfect for home, workshop, craft and hobby projects. It can be used for shrink wrapping, embossing projects and more.

Two Temperature Settings

Find the ideal heat output for your project by using the two temperature settings. The gun features a high 680°F (360°C) and low 450°F (230°C) temperature setting.

Compact Design

The heat gun’s design allows for precise heating application, which is great for small, delicate projects. It offers three operating positions (palm, pencil and hands-free) for added versatility.

Shrink Wrapping

Use the Micro Heat Gun to apply concentrated heat when shrink wrapping plastic around soap, gift boxes, candy and more!

Embossing

Complete your next embossing project by using this hot air tool. The pencil design makes it simple to apply controlled heat when embossing cards, paper and scrapbooking material.

Wire Heat Shrink Tube

Cover damaged wires or cellphone cables by shrinking tube around the exposed sections. Apply heat with the HT400 to securely shrink the tube and get the job done quickly.

• VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
• VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
• INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
• UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
• AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you

User questions & answers

Question:	will this work on the solder shrink tube connectors
Answer:	Yes it does. I used it to remove sticky tape from car badges. As well as applying a 3M vinyl on my headlights. It gets extremely hot
Question:	Will this work well to remove decals from a vehicle
Answer:	I haven't tried it but I suppose if you leave it pointed on the soft plastic long enough then it might melt it. That's my best guess.
Question:	Can i use this to pop bubbles in resin
Answer:	I feel like it would be to strong for smd/sme's assuming your talking about things like mother board components. The airflow seems similar to a large multi speed heat gun on low speed.
Question:	Does it work well for setting vinyl onto yeti tumblers
Answer:	The product is ergonomically designed and matched with soft rubber, which effectively reduces fatigue during long-term use. The product is equipped with a stable stand, which can be used while standing.

Product features

Heat Gun For Everything

Perfect for embossing, shrinking, wrapping, paint removal, drying, melting, weathering, soldering, image transfer, and more!

Loaded With Features

• Two Heat / Speed Settings
• Nozzle Safety Shield
• Extra Long 6-Foot Cord
• Insulated Body
• Stand included

Safe and Secure

All Chandler Tool products are UL-Safety Certified. We are committed to providing quality tool and products.

Product description

The DEWALT D26960K Heavy Duty Heat Gun with LCD Display has LCD Display that allows users to adjust temperature within 50-Degree increments in a range of 150 to 1100-Degree F. It has a built-Inch overload protection that shuts the heating element down and prevents burn up. A built-Inch hang ring adds a convenient storage feature, and an innovative kickstand support provides greater stability and prevents tip over. The ergonomic comfort grip and lightweight and compact design provides greater comfort for long hours of use. Includes 12 common accessories for versatility and a kit box for easy storage.

• LCD Display allows user to adjust temperature within 50-Degree increments
• Built-in overload protection shuts the heating element down and prevents burn up
• Built-in hang ring adds a convenient storage feature
• Cord Protector keeps the cord from tearing away from the housing
• Built-in innovative kickstand support provides greater stability and prevents tip over

User questions & answers

Question:	does it have a triggger lock
Answer:	Hello Customer, Thanks for your question. Yes, the spare battery for the cordless heat gun is available for sale, you can type " Neu Master 4.0Ah Battery " on Amazon for searching. Please feel free to purchase. And anything else, please feel free to contact us via {[email protected]} for help.
Question:	Does anyone know if it can be used to soften pex for easier bending
Answer:	Dear, thanks for your question. The hot air gun can run about 15 minutes on a full 4.0 battery. And anything else, please feel free to contact us via {[email protected]} for professional help.
Question:	is it good for making cosplays and heating foam
Answer:	Hello Joe, No, NEU MASTER lithium products only compatible with Neu Master battery-pack. Hope it can help you. Please feel free to contact us via [[email protected]] if you have any issue and we will answer you ASAP. Spartatool Support Team
Question:	I am stripping old paint on some old doors & frames inside . I want to get all the paint off ,then stain. Is this gun safe for indoor use
Answer:	Hello Customer, Yes, the cordless hot air gun equipped with a lock-off the trigger to engage manual operation and achieve hands-free. Hope it can help you. And anything else, please feel free to contact us via [ [email protected] ] for professional help.

Product features

DEWALT D26960K

- LCD display allows user to adjust temperature within 50-degree increments

- Built-in hang ring adds a convenient storage feature

- Built-in innovative kickstand support provides greater stability and prevents tip over

- Lightweight and compact design weighs only 2.3 lbs

- Built-in overload protection shuts the heating element down and prevents burn up

- Cord protector keeps the cord from tearing away from the housing

- Ergonomic comfort grip provides greater comfort for long hours of use

Product description

Packing details:

1*Hot Air Gun

1*Additional replaceable protecting cap

• Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed.
• Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
• Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
• The temprature can not be adjusted, but it can reach at about 200°C/390°F within a few seconds abstractly which heat up quickly and works like a charm.
• Packing details: 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap (accessories)

User questions & answers

Question:	Can this be used to re-melt & smooth the tops of my soy candles
Answer:	Sure.
Question:	Would this soften a vinyl album
Answer:	yes
Question:	How hard does it blow
Answer:	Hi, our heat gun can be use as a auxiliary tool of weld seams
Question:	Hi! Also work with 220v
Answer:	It will stand on its own with the nozzle point straight up (vertically).

Product description

12

• ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
• ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
• ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
• ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
• ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

User questions & answers

Question:	does it get hot enough to deform pvc(so that i would be able to adjust the shape
Answer:	Yes. It can also be used to repair holes, rips or tears in vinyl.
Question:	will this work to Heat Shrink Connectors for Electrical splicing
Answer:	Don’t no
Question:	Does it melt shrink wrap smoothly
Answer:	Same here.. and not sure if has a fan or is it intended to just use convection to direct the heat ? Mine just poured smoke and didnt seem to put out much heat. I'm used to a forced air coming out of a heat gun.
Question:	Will this work on sealing packages in bubble wrap
Answer:	Dear customer 1500D: 752℉& 1112℉(400℃ & 600℃) features High/ Mid/ Cool/ Off control [ III: 500 L/min, II: 250 L/min,I: 500 L/min, Off] 1500H: 662℉& 1112℉(350℃ & 600℃) features High/ Mid/ Off control [ II: 500 L/min,I: 300 L/min, Off] Thanks

Product description

Product Feature

• Heat Shrink Set: Heat Gun and Heat Shrink Tube.
• 328pcs different color and size tube fit all storage cases.
• You do not need a heavy industrial hot air gun to shrink the tube. Only the most suitable for your use will be the best choice.
• What's more you get?

Product Descrition

Heat Gun:

• Material: ABS Plastic
• Color: Black, White
• Length: approx. 24cm
• Power Cable: approx. 1m
• Working temp: 200 ¡æ
• Power: 300W
• Voltage: 110V 50-60HZ
• Weight: approx. 310g
• Plug Type: US Plug

Heat Shrink Tube:

• Material: Plastic
• Color: Black,Green,Yellow,Red and Blue
• Sizes: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm
• Pcs: 328

• Unique Heat Shrink Set: Containing 328pc Heat Shrink Tubing and a 24 cm Heat Gun. Both can be used together, fully considering your needs, once to meet all needs.
• Various sizes of heat-shrink tubing: The ultra-large capacity 328pcs kit contains 1 mm, 2 mm, 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 14 mm, heat shrink tubing in various sizes to meet your different needs.
• Professional Grade Tubing: All heat-shrink tubing are professional tubing. High-quality standard tubing can better protect your wiring. It can be used not only to repair wires,but also for hand-made.
• This Heat Gun Professional for Plastic Pipe: This hot air tool has an operating temperature of 200 degrees Celsius（392℉）.
• Two Vents on Both Side: This hot air gun is designed with two vents on both sides, which can better dissipate heat, reduce damage and extend the service life of the air gun.

User questions & answers

Question:	Can work in 220 volts
Answer:	We do not recommend using any of our heat guns to start charcoal in a grill. if you have any questions feel free to call us at 1-800-328-8251.
Question:	How easy is it to clean
Answer:	While we have not tried it specifically for this the Furno 300 works great on all kinds of projects that require heat. I would suggest trying it on an inconspicuous piece as a trial. If you would like to discuss this or have other questions feel free to call us at 1-800-328-8251.
Question:	what is PETG
Answer:	Interesting. I understand reflow and motherboard but what is xylod? A type of flux?
Question:	Whats the Ratio of the shrink tubes 2:1 or
Answer:	200,400,500,800,1000 and 1200.

Product description

Mini 300 watt heat gun for embossing powder. Fast and easy to use for multi-function DIY works.

Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.

Built-in stand for self-support and table top use.

Specification:

Material: ABS Plastic

Length: approx. 24cm

Power Cable: approx. 1m

Working temp.: 200 ℃

Power: 300W

Voltage: 110V 50-60HZ

Weight: approx. 310g

Plug Type: US Plug

Package Includes:

Heat Gun x1

Manual (English) x1

Instructions:

Power on the embossing tools.

Hold the product as shown on the picture.do not touch the hot nozzle.

Keep 5-6cm distance between the heat tool and item.

Suggest do not continuously use more than 10 minutes to prevent overheated.

• Unique Heat Shrink Set: Containing 40pcs Heat Shrink Tubing and a 24 cm Heat Gun. Both can be used together, fully considering your needs, once to meet all needs.
• Professional Grade Tubing: All heat-shrink tubing are professional tubing. High-quality standard tubing can better protect your wiring. It can be used not only to repair wires,but also for hand-made.
• This Heat Gun Professional for Plastic Pipe: This hot air tool has an operating temperature of 200 degrees Celsius（392℉）.
• Two Vents on Both Side: This hot air gun is designed with two vents on both sides, which can better dissipate heat, reduce damage and extend the service life of the air gun.
• Power not to be underestimated: even such a small heat gun can quickly reach 300W of power. Small and compact, but it makes a huge difference! The hot air is rolling in.

User questions & answers

Question:	Can this be used with embossing powder
Answer:	Each Drawer 12" x 8" x 2.5" Overall dimensions: 27-3/4" L x 16-1/2" W x 30-1/2" H
Question:	What does it do exactly? May you please upload a video explaining its function
Answer:	No it don't weigh 5 pounds. More like 30 to 40 with the small roll of wire
Question:	Is the pink hard plastic or rubber
Answer:	This welder cannot run 1/8 " anything it's limit is 3/32 I know I have one outside in my shop and use it every day and honestly it doesn't run 6010 very good
Question:	What are the small plastic parts for? Maybe wiring? If so, how would it go over the cords ends
Answer:	The Lincoln LE31MP can be used with the PTA-9 Tig torch for maximum versatility and maneuverability or the foot pedal for the optimum amperage needed for any TIG project. You can TIG weld with or without the foot pedal as this welder will automatically detect and configure when a foot pedal is connected.

Product description

Paint Heat Gun for Craft Epoxy Blower Hot Air Heater for Embossing Stamps PVC Resin 300 EVA Tubing



★Characteristics：

1：Hand-held DIY hot air gun, 2-3 seconds to quickly heat up, more convenient to dry and shape your work

2：Material ABS plastic, stainless steel bracket，with CE-ROHS certification, you can use with confidence

3：ON/OFF switch, safe and convenient switch design makes it easier and more convenient to heat gun

4：Built-in overheat protection device can reduce the use temperature of the heat gun, and the product has a heat dissipation port on both sides to prolong the service life

5：The 100° rotating steel frame is a great help for your uninterrupted use. The steel machine not only keeps the bubble remover at a certain distance from your tumbler crafts, but also allows you to pause it at any time without hurting the work



★Specifications：

1：Color: Pink(body) + White(protecting cap)2：Package dimensions：11.8 x 3.4 x 2.1 inches

3：Product Size：9.8 x 1.9 x 1.9 inches

4：Rated voltage: 110V

5：Weight: 0.5IB

6：Power: 50-60Hz

7：Rated power: 300W

8：Product line length: 39.3 inches

9：Operating time: 10 minutes

10：Package：a bubble gun and a manual



★Note when using the heat gun

1：Keep 0.3inch away from the air outlet

2：Keep a distance of 0.1-0.2inch from the work, and heat it at a 45° angle until the work is completed

3：Do not use a heat gun to heat the work directly at 90°

4：If the handle temperature rises significantly, turn off the power and wait for cooling. It is recommended to use 2-3 minutes each time

5：Do not let your child use this product alone

6：This product cannot adjust the temperature, please do not touch the hot nozzle directly. You need to wait for him to cool down before continuing to use it.

• ★【Embossing dryer】: Mini craft heat gun for equipment heating Shrinking film, mud toys and other items. good tool for ceramic creations.
• ★【Shorter warm-up time】 : Made by High-tech PTC,The Glue Sticks instant heats up within 3-5 minutes.And easy to Remove Air Bubbles .110V voltage,New Arrival US Standard,no need voltage converter any more.
• ★【Easy Hands Free Feature】: Use the installed, retractable stand for hands free operation to easily complete all of your heating for cup acrylic making.Convenient to use, no need for gloves and don't get your fingers sticky, no mess in applying epoxy and glues.
• ★【High Quality Material】: Our Bubble Remover Gun is made from top quality materials of ABS plastic, copper, steel, precisely molded and processed by advanced CNC technology.Built in a heat sink makes the internal temperature of the Hot Air Gun is reduced and life is prolonged.
• ★【WIDE USAGE】：It ensures steady blowing at a certain hot temperature to remove annoying bubbles in colorful or crystal clear pigments for epoxy resin mixing,lab, education demonstration, slime, clay, paint, craft, molding, casting, stain making,valentine's day gift making.

User questions & answers

Question:	If heated enough, will this make the PVC pipe flexible
Answer:	It would probably be safe to use but when mine was apparently shipped in a non-pressurized airplane hold. The cap was intact but the sealer had leaked out all over. I will buy locally next time. Auto stores may have it or may be able to get it.
Question:	Can it be used to melt the adhesive when changing phone parts
Answer:	I primarily use this on Triumph motorcycle cases and it is the best Permatex (or any) product for the job. I've also used it on rubber pipes to metal banjos and it worked well there too. I suspect that it would work well in your situation but I have not used it on plastic and there are so many kinds of plastic that I would test it first. Personally, on threads where gas or oil is involved, I use the yellow Teflon tape -- it seals gasoline so diesel should be no problem.
Question:	Can he eliminate bubbles? I am going to make an art cup
Answer:	this will only bond to a oil free surface. you have clean off the cover plate the diff. body of any oil residue. squeeze a bead of silicone along the perimeter, bolt on the cover. let it set up 24 hrs then you can add the oil . I recommend buying the proper gasket that fits the rear end
Question:	Is it dangerous to use, will the handle hurt my hand
Answer:	Yes, very good for valve cover gaskets, put a 1/8-1/4 bead all round cover,,,, wait for 10-15 minutes, install, I use it with gaskets, to hold everything in place👍😱⚡️

Product features

UPGRADE HEAT GUN

The heat gun housing material made of superior ABS, the nuzzle, bracket, inside material made of stainless steel, more durable. The Glue Sticks instant heats up within 3-5 minutes.And easy to Remove Air Bubbles .110V voltage,US Standard,no need voltage converter any more. The retractable bracket can carry out hands-free operation.

VERSATILE

The hot air blower heat gun can be used for heat-shrink tubing, embossing power, drying water color, making candle, or with HTV(Heat Transfer Vinyl) on mugs, homemade crafts etc, a useful tool for scrap bookers & card makers. It ensures steady blowing at a certain hot temperature to remove annoying bubbles in colorful or crystal clear pigments.

Electric Paint Heat Gun

1：Hand-held DIY hot air gun, 2-3 seconds to quickly heat up, more convenient to dry and shape your work 2：Material ABS plastic, stainless steel bracket，with CE-ROHS certification, you can use with confidence 3：ON/OFF switch, safe and convenient switch design makes it easier and more convenient to heat gun 4：Built-in overheat protection device can reduce the use temperature of the heat gun, and the product has a heat dissipation port on both sides to prolong the service life 5：The 100° rotating steel frame is a great help for your uninterrupted use. The steel machine not only keeps the bubble remover at a certain distance from your tumbler crafts, but also allows you to pause it at any time without hurting the work

• ✅3-In-1 Multi-Function: Soldering Iron, Mini Torch, Heat Blower. A Truly Versatile Soldering Iron Gun For Many Applications Such As Automotive Wire Repair, Fine Jewelry Repair, Electronic PCB and Computer Motherboard Repair, and More
• ✅Butane Powered: Rechargeable in Less Than 20 Seconds. Can Operate Up to 90 Mins With Single Charge. Heat Output Range From 30W to 125W. Since It Is Gas Powered Therefore Does Not Require Electricity to Operate
• ✅Self-Ignite: Just Turn On The On/Off Gas Switch And Pressing The Ignite Button The Unit’s Will Light Up and Heat Chamber Will Glowing With Orange Flame
• ✅Adjustable Flame: Adjust The Temperature and Heat Output With Ease Just Move The Slider to Control Amount of The Gas Output
• ✅Portable and Light Weight: Only Weight About 4oz, Can Fit Inside The Pocket, Backpack or Tool Box. [Note: Butane is not included]

User questions & answers

Question:	I would like to know how much is the cost for the extra accessory items and where do you buy the butane to refill it at
Answer:	Yes. I purchased a reduction nozzle to concentrate the heat on the object you are heating up.
Question:	How can I see if butane already filled up
Answer:	Yes. Get at least the 6.0ah battery
Question:	Does the flameless heat gun function work well for electrical heat shrink with integrated solder? I can't always run an extension cord to my car
Answer:	Yes it will. I do recommend using the fuel XC batteries as they last longer. The regular fuel batteries work but don’t last real long
Question:	Is the flameless heat gun good for vynil
Answer:	I'm not sure of an accurate answer on that, but I did find some information that was insightful. I will include it here with my answer. Here it is! Hope it's helpful! ***Sees its heaviest use with our high school robotics team (FIRST FRC). Two 5ah batteries gets us thru a day of work and frees us from cords which is especially important at competitions where running a corded heat gun could trip a breaker for 6 or more pits.*** One person found this helpful

Product features

Welding, Creme Brulee and more

Repair Electronics, Electrical Wire and more

Repair Glasses Frame, Arts, Crafts and more

Automotive, Wire Harness and more

OPTIONAL SOLDERING TIPS AND SOLDERING WIRES

Available for purchase

1. 2.4mm diagonal
2. 2.4mm Conical
3. 2.4mm Chisel
4. 1.6mm Conical
5. Hot Knife
6. Heat Deflector
7. Soldering Wires: 60/40 Rosin Core Soldering Wire and more

Product description

Features

【High Power】 Heatgun made of 380W high power motor(120V) which can heat up fast in seconds provides huge heat making sure your work more efficient.

【Long Time Using and Overheat Protection】 Heating gun having overheat protection can be used for 250 hours constantly and will not burn out, consisting of nickel-chromium heating wire structure and mica bracket, which extends the service life.

【Easy To Use and Adjustable Temp】 Setting plug and switch, then starting to use heater gun hand-free by opening the stand. for different projects, it provides temperature 1: 480℉(250℃) air flow 100L/min or temperature 2: 850℉(450℃) air flow 200L/min.

【Portable Design and Long Cable】 Heatgun has 0.66lb light weight and 9.84 x 1.97 x 1.97 inch small size, which makes it portable and used for narrow space. besides, this heat tool has a 7.2Ft cable providing you longer using distance.

【Wide Application and Product Service】 With the cone nozzle, you can used the small heat gun for epoxy resin supplies/crafts/shrink wrapping/soldering/vinyl wrap/wire connectors/candle making/embossing/phone repair/resin dryer/crafting supplies/bubble buster/shrink tubing/blower/automotive/epoxy dryer/paint dryer and so on. Product Service: if you have any questions about our hot gun in 2 years, please contact us, we are happy to help.

Specifications:

Product Size: 9.84 x 1.97 x 1.97 inch

Product Weight: 0.66lb

Wire length: 7.2ft

Working temperature: temperature 1 480℉(250℃) air flow 100L/min or temperature 2 850℉(450℃) air flow 200L/min

Power: 380W

Voltage:120v(50Hz)

Material: PA6+GF30

Working time: 250hours

Color: orange

Package Include:

1 x HGP40AC Heat Gun

1 x Cone Nozzle

1 x User Manual

• 【High Power】 Heatgun made of 380W high power motor(120V) which can heat up fast in seconds provides huge heat making sure your work more efficient.
• 【Long Time Using and Overheat Protection】 Heating gun having overheat protection can be used for 250 hours constantly and will not burn out, consisting of nickel-chromium heating wire structure and mica bracket, which extends the service life.
• 【Easy To Use and Adjustable Temp】 Setting plug and switch, then starting to use heater gun hand-free by opening the stand. for different projects, it provides temperature 1: 480℉(250℃) air flow 100L/min or temperature 2: 850℉(450℃) air flow 200L/min.
• 【Portable Design and Long Cable】 Heatgun has 0.66lb light weight and 9.84 x 1.97 x 1.97 inch small size, which makes it portable and used for narrow space. besides, this heat tool has a 7.2Ft cable providing you longer using distance.
• 【Wide Application and Product Service】 With the cone nozzle, you can used the small heat gun for epoxy resin supplies/crafts/shrink wrapping/soldering/vinyl wrap/wire connectors/candle making/embossing/phone repair/resin dryer/crafting supplies/bubble buster/shrink tubing/blower/automotive/epoxy dryer/paint dryer and so on. Product Service: if you have any questions about our hot gun in 2 years, please contact us, we are happy to help.

Product features

High Power

With 380W high power motor(120V), hot air gun heats to 850℉ in seconds providing huge heat which makes sure your project success

Dual Temp

For different projects, you can choose temp 1: 480℉(250℃) air flow 100L/min or temperature 2: 850℉(450℃) air flow 200L/min.

Overheat Protection

Consisting of nickel-chromium heating wire structure and mica bracket, overheat protection makes sure heat gun will not burn out and extends the service life.

Long Time Using

250 hours, it is the time you can use the heat gun constantly which is composed of heat-resistant material PA6+GF30.

Easy and Hand Free

Setting plug and switch, opening the stand, now you can use heat gun hand free.

Compact Design

0.66 lb light weight and 9.84 x 1.97 x 1.97 inch small size make it portable and used for narrow space.

Long Distance Use

A 7.2 Ft cable provides you longer using distance, it means you don’t need to change sockets again and again

2 years Product Service

If you have any questions about our hot gun in 2 years, please talk to us, we are happy to help.

Wide Application

With the cone nozzle, you can used the small heat gun for epoxy resin supplies/crafts/shrink wrapping/soldering/vinyl wrap/wire connectors/candle making/embossing/phone repair/resin dryer/crafting supplies/bubble buster/shrink tubing/blower/automotive/epoxy dryer/paint dryer and so on.

Product description

Product Features:

Mini 150 watt heat pen. Fast and easy to use for multi-function DIY works.

Comfortable and lightweight heat pen, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.

Built-in stand for self-support and table top use.

Specification:

Material: ABS Plastic

Length: approx. 19cm,Width:3.8cm

Power Cable: approx. 1m

Working temp.: 200 ℃

Power: 150W

Voltage: 110V 50-60HZ

Weight: approx. 204g

Plug Type: US Plug

• The mini heat gun has a temperature control setting. When the temperature is too high, it will automatically cut off power. Customers don't need to worry, as long as the temperature drops, they can continue to use.
• Heating tools,can be used in soft clay.Built-in stand for self-support and table top use.
• General purpose heat pen for crafts.Heat pen size is smaller than the heat gun, the function is the same, and the work is finer.
• At heat pen tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
• Mini Heat pen great for heat shrink tubing, embossing, drying paint, paper, fabrics, craft foams, glue, ink, DIY, firm shape, clay

User questions & answers

Question:	Puede usarse para despegar puente de guitarra
Answer:	I did not use it to remove bubbles, but my grandfather and others used to melt the fire paint, which is very easy to use.
Question:	Will work for cell phones
Answer:	I used it twice to heat the child's clay and craft stickers, it did not hurt my hand at all, and the hot air gun has a small bracket, which is very convenient in design.
Question:	Will this work to remove stickers from plastic and wood
Answer:	I don't see why it won't..I used it on my oil pump ad my water pump...works great...no leaks..oil, antifreeze does not have any affect on it..Good stuff.
Question:	Can this ne used to shrink bags
Answer:	These sealers come in three versions: 1) fast-hardening, fast-drying, 2) slow-drying and brushable, and 3) non-hardening. Each forms a gasket that can take temperatures up to 400 degrees Fahrenheit. Technicians use #1 to install threaded connections and block expansion plugs and to create seals between metal-to-metal flanges. They use #2 on paper or cork oil pan gaskets and neoprene transmission pan gaskets. Technicians use sealers of the #3 variety for hose connection seals.

Product features

Pink

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

Purple

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

White

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

Black

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

Colorful