8 best lazer engravings

Product description

ORTUR Laser Master 2

👇For more information, please visit the link below👇

👉ortur.tech/olm2👈

【Power Description】

LU1-2: 7W

LU1-3: 15W

LU1-4: 20W

【Laser module power】

LU1-2: 1200mW-1600mW

LU1-3: 4000mW-4500mW

LU1-4: 5000mW-5500mW

【Laser wavelength description】

Laser Reaching Range: 445 ± 5nm

Note:

1. When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.
   
   
2. Do NOT operate laser without eye protection (Laser goggles).
3. Please set up laser engraver in the fireproofing area, with good ventilation.
4. Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection
5. Please avoid strongly impact on the machine.
6. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
7. Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.
8. Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows.
9. While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.

• 【The Most Advanced Firmware】Ortur laser master firmware, smarter, faster, higher precision and easier to use. Specialized Motherboard with 32Bits MCU. It could preprocess 32 instructions, support baud rate as high as 921600, more powerful! Engraving speed could be as high as 3000MM/Min. (If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S)
• 【Excellent safety protection】1. There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop. 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
• 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.
• 【Realize precise engraving】Laser power range could be S0 - S1000, compared to 8bits desktop laser engravers, which only has S0 - S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8bits high power laser engravers could not do.
• 【Quality and Assurance】We are the manufacturer of ORTUR. We only provide the best quality and comprehensive pre-sales and after-sales service to Amazon customers. If you need pre-sale consultation or encounter any problems. Please email me. 👉support_ortur[at]163.com If you encounter technical problems. Please visit 👉ortur.tech/support👈Our engineer Gil will troubleshoot and solve the problem for you.

User questions & answers

Question:	Will this cut vinyl decals
Answer:	I would recommend against it. The laser uses concentrated light and as such generates a lot of heat. The vinyl material may (probably) release toxic gasses and the heat will likely distort the material. For cutting decals I recommend something like a Cricut.
Question:	I am wanting to engrave in leather and cow hide. Which watts would you suggest? Also would be doing wood but main focus is leather and hide
Answer:	I own the 20 watt model and would recommend it. The 15 watt would get the job done but suggest getting the 20 watt.
Question:	Is wifi required on this unit all the time
Answer:	No. The machine only needs to be connected to a computer for operation. No need to connect to the Internet. You can operate the machine offline.
Question:	What do have to set the unit on or can I just set it on a table without anything under it
Answer:	I would suggest that you place a 24" x 24" non flamable piece under the unit. For example, i placed mine on a table, but placed a 2 SF piece of tile under it in the event the laser burnt through whatever i was cutting. This was just a precautiinary measure. I picked one up at a local tile liquidation store for $2.00.

Product features

SPECIFICATION:

● Motherboard: 32 bits motherboard with STM32 MCU

● Firmware: Ortur Laser Master Firmware

● OS of Upper Computer: Windows (Working with LaserGRBL), MAC OS and Linux (Working with LightBurn)

● Power of Laser Engraver: 36W, 12V 3A

● Electrical Power of Laser Module: 7W, 15W, 20W

● Wave Length: 445 ± 5nm

● Variable Focus: Yes

● Default Focal Length: 55MM for 15W & 20W Laser Module; 58MM for 7W Laser Module

● Input Format: NC, BMP, JPG, PNG, DXF, etc.

● Carving Area: X: 400MM x Y: 430MM

● Carving Speed: 3000MM / Min and less

● Image size: No Limit (The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81um pixel precision)

HOW CHOOSE:

● The Laser Master 2 - 7W is good at picture engraving.

● The Laser Master 2 - 15W is the most cost-effective, available for both engraving and cutting.

● The Laser Master 2 - 20W is higher power and supports a faster engraving and cutting.

● This laser engraver supports PWM mode.

● Pre-assembled parts, just need 10 - 20 minutes to install the machine.

● 400 x 430 mm large engraving area.

● Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance

● Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

• ✅New eye protection design:The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
• ✅Solid and easy installation structure design:The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes.
• ✅Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
• ✅Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
• ✅Precise scale lines axis :There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.☆☆☆Please note: to engrave stainless steel, the surface must be painted black first, and it can be wiped clean after engraving.

User questions & answers

Question:	Is there a suitable offline controller that works with this
Answer:	I too bought this router only to find out the controller is junk. I am using an Arduino along with the tb6600 stepper motors. Using grbl to run g-code
Question:	Does this have prime shipping
Answer:	We will ship it by UPS from U.S. warehouse. It usually takes 4-6 business days for delivery. Thank you!
Question:	I just received my new 3040 cnc router. I have issues when I trying to assemble; all three axis are not moveable. Any suggestion
Answer:	Problemas con el enlace con la computadora, no es compatible con Windows 10 ,no me reconoce el puerto usb
Question:	Can this machine be plugged into a 110 volt outlet
Answer:	Yes, it is U.S standard 110v machine.

Product features

Eye protection design

The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.

Solid and easy installation structure design

The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes.

High-performance fixed-focus laser

no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.

Wide compatibility

The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

Precise scale lines axis

There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.

Widely applicable materials

Carving Objects:All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal

Cutting Objects:Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.

5W Output Laser High-energy Cutting

Full body metal structure

Actual work display

Package Included

1 x X-axis assembly

2×Section 57CM

2×Section 48CM

1 x control box

3 x support legs

1×Goggles

1 x laser

1×24V2A power adapter

1 x power cord

1 x USB cable

• 【Wide Application】LaserPecker pro engraver with small & lightweight design engraves on a wide variety of materials, like Paper-board, Fabric, Wood, Leather, Felt,Cloth,Fruit and more. The Easy Etcher can widely be used in Engraving, Carving, Etching etc. 【Note】Plastic : Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off. 【Cannot 】for Stone,Metal,Glass
• 【 In-App Editing & Preview Mode to Control Smartly & Work on nearly any surface and tiny objects】 In-App Editing Mode allow to create any patterns and words, modify the pictures or photos to engrave, features many picture editing toors; Preview Mode will let users can easily adjust the size, position, and the rotation angle of the pattern on the target surface by projecting a guide laser before engraving；This unique laser etcher can engrave on any surface or on tiny objects
• 【More Accurate Precision】LaserPecker Pro has 0.15mm accurate light spot and high quality 405nm blue-violet laser, making accurate precision engraving; NO limit on Engraving Height; Works with powerbank; Wirelessly bluethooth controlled by a smartphone; 10,000 + lifespan built for long-term usage; Engraving range: 100*100MM; File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported.The most compact and easy-to-use laser engraver of its kind
• 【More Accessories can be Choosed 】 Auto-focusing Support Stand: The built-in sensors of the stand will measure the distance in seconds and automatically adjust laser focal point to the right height； Magnetic Protective Shields: Protect your eyes and directly see laser movements in the progress of engraving without wearing protective glasses： Big Case : Take all accessories in one easily.
• 【Safe and Guarantee】LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles; Safe Certification: CE, FCC, FDA, RoHS，CDRH,IEC 60825-1 (Laser Class1)，IEC 60825-1 (Laser Class 4) ; 30 days free replacement parts ,1-year warranty, and full life customer service

User questions & answers

Question:	Cual es el area de grabado util
Answer:	Puede imprimir hasta 15 cm x 15 cm, solo será más lento. Una gran medida es 40mm x40 mm Porque es muy rápido y excelentemente terminado.
Question:	I want to order laserpecker l2 for glass or metal. is it available yet
Answer:	Their website says March 2021, let's hope they release it on time.
Question:	Will it engrave hdpe plastic (natural color
Answer:	it will be marked first to be heavey color to absorb the laser power and then you can wipe off the marked color after engraving
Question:	Does this come in more than one box? I ordered the Super, but I received one box with no instructions and no carry case
Answer:	hi, it is not come with it, if you wanna it, plz contact our customer service email

Product features

Laser Engaved Paper

Laser Engaved Leather

Laser Engaved Wood

Laser Engaved Cloth

Laser Cut Paper

Use G-code with Inkscape to cut the paper more easily and fast

Laser Engaved Color Paper

Painted the paper with color powder first to engrave then blow it away

Laser Engaved Color Wood

Engraved a few butterflies first and colored with iridescent paints

Laser Engaved Plastic

Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off

Easy to Use & Locate The Engraved Position

Easy Start: Power & Connect with LaserPecker app by powerbank, choose or upload any pattern in-app and edit it

Preview Mode: LaserPecker Pro will first show a square on the target surface,which users can easily adjust the engraved size and position

Smart App

You can upload any pictures, create any patterns/text to the LaserPecker APP to engrave

It allows you to modify the pictures or drawings before engrave.

In-App Editing Mode Setting

Choose a picture from your phone and choose your favorite mode according to different processing effects.

Engrave times will also depend on this factor.

Fonts

More Fonts can be choose to create your idea

Auto-focusing Support Stand

LaserPecker Pro is upgraded with an auto-adjusting support stand that sets up and focuses in seconds.

All you have to do is put the engraving target on the spot.

The built-in sensors of the stand will measure the distance between the laser generator and the target and automatically adjust the height to make sure the focal point is the correct distance from the surface of the object.

Portable & Longterm Usage

LaserPecker is the most compact and easy-to-use laser engraver of its kind. Just grab it and put in your bag, your pocket art studio is ready to work anytime and anywhere.

Safety

LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles etc

Big Case

LaserPecker Pro can be put in one bag to take it everywhere, which you can engrave what your want anytime

• New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
• Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
• Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
• Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
• Simple Assembly: Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise.

User questions & answers

Question:	Can it engrave medallion/ medals? Are they consider soft aluminum ( Zinc Iron
Answer:	Kit comes with all parts (extrusions, acrylic, T-nuts, etc). to make the CNC enclosure as pictured. Don't need to get any other parts.
Question:	Can this CNC machine carve brass with the appropriate bits
Answer:	The front wall is 4mm, and others are 3mm. The top open is for connecting power cord/ USB cable and replace engraving materials conveniently.
Question:	How do I order the laser module
Answer:	Yes. There is a hole in the corner about 1" by 1.5"
Question:	Will this work with Fusion
Answer:	There is a video - not complicated

Product features

The Genmitsu CNC

Designed for the absolute beginner, the Genmitsu is a great tool for starting CNC learning. If wood-working is your hobby, you can use it to add features like curved words and exquisite patterns. If you are a student just learning CNC, it can help you engrave models that you are coding and designing.

You will find the SainSmart Genmitsu an excellent self-learning tool that allows you to DIY your great projects on a cost-effective platform without the risk of damaging expensive equipment.

Upgraded Power Adapter

The reoptimized power adapter comes with CE, FCC & UL certifications, with over-voltage protection, over-current protection, over-temperature protection, and short-circuit protection. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

Offline Control

The offline controller module allows you to control the CNC router remotely without connecting to the computer. Your CNC router can be placed wherever you want, such as garages and workshops.

Redesigned Mainboard

Equipped with ABS case and fan, the performance and stability of the new mainboard have been greatly improved.

Open Source

It’s built on Arduino and Grbl (both open source). You could easily find support, tutorials, additional training, and inspiration elsewhere online.

Versatile

With a 1.8-inch effective engraving depth, the Genmitsu 3018-PRO is capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, and a wide range of other materials.

WHAT'S IN THE BOX

1 x 3018 PRO DIY Router Kit

1 x Extension Rod with ER11 Collet (3.175mm)

4 x Plate Clamps

10 x CNC Router Bits (Cutting Angle: 20 Degree; Shank Diameter: 3.175mm; Tip Diameter: 0.1mm)

1 x Offline Controller

1 x Power Supply

1 x English Manual

1 x CD

• ✅【More Convenient and faster】Off-line and APP Wireless Control. 360°Engraving, High Speed, save more time. Cloud Gallery and Online Gcode Makes Creation Easier.
• ✅【Only Support NEJE Software】Working area: 110 x 120 mm Engraving Range. Operating System: windows 7/10 / android / iOS / ipadOS/ macOS. Picture format: BMP / PNG / JPG / NC / DXF,etc.
• ✅【Safe To Use】Built-in MEMS sensor protection, when accidentally touched, the machine will automatically stop working.
• ✅【Carved Material】It can carve MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc.(Not suitable for iron or other metal)
• ✅【NEJE Service】We provided 1-year warranty, and full life customer service. If you have any questions about this engraving machine, please contact us, we will reply to you in 24 hours.

User questions & answers

Question:	Can i use in pcb printing
Answer:	yes. it can.
Question:	Does it engrave metal
Answer:	No. It cannot engrave iron and other metals.
Question:	Will it work with a chromebook
Answer:	Sorry. It can only support NEJE software. Other professional engraving software, we will continue to update in the future.
Question:	Cutting/engraving best
Answer:	Cutting is not the best. Best engraving pattern, mini Logo

Product features

NEJE High Speed mini Engraving Machine with Wireless APP Control - 110 x 120mm - Roll Protection

• High Speed mini Engraving Machine,2.5W Output Optical
• Control Board: 2 x MCU + Wireless control + MEMS
• Satety Protection: MEMS
• Working Size: 110 x 120 mm
• Pixel: 1466 x 1600 px
• Dot pitch: 0.075mm

NEJE APP for Android, NEJE Wireless APP for iOS / macOS, windows. (NOTE: Mini machine is not compatible with LASERGRBL,Benbox,LightBurn software, if you want to use it, please choose MASTER 2 engraving machine.

Super Optical Lens Focus

• Minimum Parameters Focus point: 0.01mm
• Better focus on carving out works.

Best Function

• Want to present grayscale photos, patterns, cards.
• Best for children and family DIY photos, greeting cards, drawings.

All protection

• Built-in Mens Sensor Protection
• when accidentally touch the machine,the machine will automaticcally stop working

Package Included：

1 x Mini Engraving Machine; 1 x USB Cable

1 x 12V2A Power Adapter(US) ; 1x goggle；1 x Manual

1 x ON/OFF Switch Cable; 1 x Eu adapter; 1 x L-shaped wrench

2 x Test Paper; 1 x wooden block; 1 x Focusing plate

• 【Convenient & Safe 】 Small & compact home desktop laser etcher machine with built in G-Sensor and premium laser head, more durable and stable and longer working time. Wifi connection, can be connected with smartphone, computer and carved, can also be offline etching. Closed and hidden design, built-in eyes protection lens, cooling fan and anti-slip base; the laser head automatically closed when abnormal movement detected, more safe to use.
• 【Powerful Function】3000mW ultra strong laser power, the working range can be 3.14× 3.14 "on any size object, 0.01mm accurate precision engraving, and can work continuously for 8 hours ; Great for DIYer or artists, beginners, professionals, hobbyists, carpenters, bakers, leatherworkers, designers, handcrafters, craftsman, craftspeople, craft enthusiasts, modeling enthusiasts etc.
• 【Wide Range of Applications】This laser engraver machine can carve your design on almost any objects. Like cardboard, wood, leather, cloth, bamboo, felt, fruit, plastic, acrylic, metal spray paint etc.
• 【Four Working Modes】 Black and white, discrete, outline and sketch carving. which can import images or text directly without creating G code. The default mode of black and white mode is carving mode; discrete mode is used for carving grayscale photos ; contour mode is used for contour carving or cutting ; and sketch mode is used for carving sketch photos; Supported image formats are JPEG/JPG/GIF/BMP/PNG.
• 【Reminder & Guarantee】When installing the software, please refer to the operation steps in the WAINLUX K6 related video or contact customer service (giraldhe@gmail) to update the software, some computers may be incompatible. We provide 30 days free return and exchange, 1 year warranty and lifetime customer service. If you have any questions about this laser engraving machine, please feel free to contact us, we will reply you within 24 hours !

User questions & answers

Question:	will this engrave a metal trophy name plate
Answer:	Pretty roomy. There are hundreds of machines out there. You need to measure your machine including the height. We have mid size Janomes in this bag.
Question:	Will this work on carbon fiber
Answer:	Hi dear， Thank you so much for your great support on us. This model is universal can match singer 9960 so pls don't worry.You can measure the size before shopping to see if it is suitable. Best Regards YARWO
Question:	Can I engrave glass with this product
Answer:	Hello, The Arrow T55 series of staplers all use our T50 staples, which are available in - ¼” (#504), 5/16” (#505), 3/8” (#506), 1/2” (#508), 9/16” (#509) and 17/32” (#50CT). You can learn more about Arrow staples in the "Skinny on Staples" guide on our website. Thanks for your question! -- Your Arrow Fastener Team
Question:	What power settings would you suggest for various materials
Answer:	Hello, Yes, these staples should work with your Black and Decker Powershot 5700. Thanks. -- Your Arrow Fastener team

• Totem S: Updated version of Totem.
• Laser power: 5.5W, Machine input power : 40W. Replaceable laser module, can install other modules to get different laser power.
• Totem s can not only engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper, but also engrave glass and metal (The effect is not as good as wood carving）.
• 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn).
• 🎈Advanced Graphics🎈: We Put Our Customers First And Will Continue To Provide The Best Customer Service To Those Who Keep Us In Business.

User questions & answers

Question:	Can I use this on metals
Answer:	Yes, if your tank has internal threads. (Most tanks now have both internal and external threads for both types of connections). BTW, I really like my time-saving, back-saving torch for projects around my small orchard on the island of Hawaii...!
Question:	Can it engrave metal
Answer:	If it is a very thin layer of ice (or just a small area) this would likely do the trick without using too much propane.... IF the ice is dense/hard and thick, I would suggest ice-melt from a hardware store otherwise you’ll go through a lot of propane. Good luck..!
Question:	Does this product come with protective glasses
Answer:	Of course you can puchase this bag. In addition, if you want Install this bag on rolling luggage cart the telescoping handle wide Should less than 7 inch.
Question:	Is this a 220 or 110 input voltage
Answer:	Yes, there is a transparent zipper pocket on the top for your sewing machine accessories and other supplies. The Internal dimensions of our carrying case is 16.5 x 7.5 x 11.5 inches. Pls kindly check the dimensions of you machine before purchase. machine