13 best laser engravings

Product description

ORTUR Laser Master 2

👇For more information, please visit the link below👇

👉ortur.tech/olm2👈

【Power Description】

LU1-2: 7W

LU1-3: 15W

LU1-4: 20W

【Laser module power】

LU1-2: 1200mW-1600mW

LU1-3: 4000mW-4500mW

LU1-4: 5000mW-5500mW

【Laser wavelength description】

Laser Reaching Range: 445 ± 5nm

Note:

1. When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.
   
   
2. Do NOT operate laser without eye protection (Laser goggles).
3. Please set up laser engraver in the fireproofing area, with good ventilation.
4. Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection
5. Please avoid strongly impact on the machine.
6. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
7. Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.
8. Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows.
9. While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.

• 【The Most Advanced Firmware】Ortur laser master firmware, smarter, faster, higher precision and easier to use. Specialized Motherboard with 32Bits MCU. It could preprocess 32 instructions, support baud rate as high as 921600, more powerful! Engraving speed could be as high as 3000MM/Min. (If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S)
• 【Excellent safety protection】1. There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop. 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
• 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.
• 【Realize precise engraving】Laser power range could be S0 - S1000, compared to 8bits desktop laser engravers, which only has S0 - S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8bits high power laser engravers could not do.
• 【Quality and Assurance】We are the manufacturer of ORTUR. We only provide the best quality and comprehensive pre-sales and after-sales service to Amazon customers. If you need pre-sale consultation or encounter any problems. Please email me. 👉support_ortur[at]163.com If you encounter technical problems. Please visit 👉ortur.tech/support👈Our engineer Gil will troubleshoot and solve the problem for you.

User questions & answers

Question:	Will this cut vinyl decals
Answer:	I would recommend against it. The laser uses concentrated light and as such generates a lot of heat. The vinyl material may (probably) release toxic gasses and the heat will likely distort the material. For cutting decals I recommend something like a Cricut.
Question:	I am wanting to engrave in leather and cow hide. Which watts would you suggest? Also would be doing wood but main focus is leather and hide
Answer:	I own the 20 watt model and would recommend it. The 15 watt would get the job done but suggest getting the 20 watt.
Question:	Is wifi required on this unit all the time
Answer:	No. The machine only needs to be connected to a computer for operation. No need to connect to the Internet. You can operate the machine offline.
Question:	What do have to set the unit on or can I just set it on a table without anything under it
Answer:	I would suggest that you place a 24" x 24" non flamable piece under the unit. For example, i placed mine on a table, but placed a 2 SF piece of tile under it in the event the laser burnt through whatever i was cutting. This was just a precautiinary measure. I picked one up at a local tile liquidation store for $2.00.

Product features

SPECIFICATION:

● Motherboard: 32 bits motherboard with STM32 MCU

● Firmware: Ortur Laser Master Firmware

● OS of Upper Computer: Windows (Working with LaserGRBL), MAC OS and Linux (Working with LightBurn)

● Power of Laser Engraver: 36W, 12V 3A

● Electrical Power of Laser Module: 7W, 15W, 20W

● Wave Length: 445 ± 5nm

● Variable Focus: Yes

● Default Focal Length: 55MM for 15W & 20W Laser Module; 58MM for 7W Laser Module

● Input Format: NC, BMP, JPG, PNG, DXF, etc.

● Carving Area: X: 400MM x Y: 430MM

● Carving Speed: 3000MM / Min and less

● Image size: No Limit (The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81um pixel precision)

HOW CHOOSE:

● The Laser Master 2 - 7W is good at picture engraving.

● The Laser Master 2 - 15W is the most cost-effective, available for both engraving and cutting.

● The Laser Master 2 - 20W is higher power and supports a faster engraving and cutting.

● This laser engraver supports PWM mode.

● Pre-assembled parts, just need 10 - 20 minutes to install the machine.

● 400 x 430 mm large engraving area.

● Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance

● Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

General

Material: Aluminum + Acrylic

Laser Power: 7w (Electrical Power: 7W, Luminous Power: 1200-1600 mw), 15w(Electrical

Power: 15W, Luminous Power: 4000-4500 mw), 20w（Electrical Power：20W, Luminous

Power: 5000-5500mw） Laser Reaching Range: 445 ± 5nm

Power By: Power Adapter 12v 3A

Product description

Feature

Have fine, Soft Texture, Easy Cutting and Engraving

Smooth Engraving, Having a Fine Ink Loading, Precise Printing

Avoiding Distortion, Suitable for Printing Small Words and Figures of Stamp

Environmental Protection Formula, One-time Hot Press Forming

Specification

Size: 11.6*8.26*0.09 in / 297*210*2.3mm

Thickness: 0.09in/2.3mm

Chemical, Oil, Abrasion Resistance

Package Included

1pc x Rubber Stamp Sheet

User questions & answers

Question:	What settings would you recommend for the glow forge 40 watt laser
Answer:	I have a 60 watt tube and I engrave it at about 40 percent 400 speed. I would just start off in a corner to test. Starting out low won’t hurt. Just do another pass if needed. When I did my first try, I eased into it over a few passes.
Question:	Can I use my 50watt fiber laser machine for making stamps with this
Answer:	I used my 60W laser that I normally use on wood. It took a few tries to get the power just right, and I can't remember what it was, but it was well under 50%. Maybe around 25%? Anyway, I did stamps of my kids' faces along with some of their friends, and they turned out OK.
Question:	Is this non-chlorinated
Answer:	Yep, it is laser safe! I’ve used it with my 40w co2 laser (glowforge)
Question:	What settings would you recommend on a co2 laser? Watts and mm/s
Answer:	I have a Boss Laser engraver, 60 watts. I read somewhere that it works best to make more than one pass. I make 2 passes and it works out just fine for depth and definition. I can't speak to mm/s as my settings are speed and power and I'm not sure what the units are but it's set on engrave 450 at 25% power ×2 passes. I had to experiment to see what worked best. I will say I was pleased with the first sheet I purchased through Amazon but the second didn't work at all and I have since found another source.

• DIY ENGRAVING: This is a miniature laser engraving machine, suitable for personal DIY art design. It can engrave text, letters, patterns, etc. It can be applied to wood, paper, plastic, leather, food bread, or even opaque glass surface.
• MINI CONVENIENT: simple and friendly interactive interface, small & compact, 3000mW laser power, connected to smart phone, computer or offline etching. automatic detection of the maximum carving area of the equipment, easy to use; is your ideal portable art studio!
• POWERFUL FUNCTION: the body adopts closed and hidden design, and the internal pipeline is easy to maintain; WiFi transmission is high-speed and stable, can carve works with the range of 3.15" × 3.15 "on any size object, with the accuracy of 0.01mm, and can work continuously for 8 hours.
• COMPATIBLE WITH A VARIETY OF OPERATING SYSTEMS: Support WIN/MAC/Mobile System.there are four model engraving black and white, discrete, outline and sketch carving, which can import images or text directly without creating G code; supported image formats are JPEG/JPG/GIF/BMP/PNG.
• WIDE RANGE OF APPLICATIONS: Cardboard, wood, leather, cloth, bamboo, felt, fruit, plastic, acrylic, metal spray paint, etc. The surface of transparent material, reflective material, etc. needs black coating paint.

User questions & answers

Question:	Is there a english instruction book for this product
Answer:	I returned this unit. The badly translated instructions were requiring me to get into the deepest parts of the programming of the computer (the “terminal”). It felt like I was opening my computer to hackers. And after all that - it didn’t work at all. Not a bit. I regret this purchase. Just - Don’t!
Question:	Could I use this to engrave my hydro flask
Answer:	Minds never worked

Product features

WAINLUX K6 LASER ENGRAVER

Wainlux K6 is a compact, powerful, and easy-to-use laser engraving machine, capable of engraving on various services and materials, including wood, leather, metal, cardboard, felt, plastic, rubber, acrylic, bamboo, etc.

This is the ideal portable art studio you can take anywhere! Wainlux is easy to set up, easy to use and very stable. Its powerful laser can clearly and quickly engrave your design on almost any surface from wood to rubber.

• 【Portable and Strong Light Design】The compact laser etcher can be take anywhere and powered by power bank; NO base design, NO limit on Engraving Height, Supported File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported
• 【Easy APP to Use and Accurate Precision】 Wirelessly bluethooth controlled by a smartphone; Greater power, faster speed, 0.01mm accurate precision engraving; Engraving range: 10*10CM: Four engraving modes, import images,text，drawing or painting directly; Recommended Focal length: 190mm-200mm（ the distance from laser mirror plane to the surface of engraved item）
• 【Durable and Safe】 Laser etching machine with high quality laser head make durablity, better stability and long working time; Working warning alert, motion-trigged stop, overheat shutdown, password lock will keep you safe from accidents: Safe Certification: CE, FCC, FDA, RoHS，CDRH,IEC 60825-1 (Laser Class1)，IEC 60825-1 (Laser Class 4)
• 【Materials can be engraved】 Wood, Paper ( Not for white paper), Leather, Fruit, Felt etc
• 【Guarantee and Suitability 】30 days free replacement parts ,1-year warranty, and full life customer service; Good for beginners, professionals, hobbyists, carpenters, bakers, leatherworkers, designers, handcrafters, craftsman, craftspeople, craft enthusiasts, modeling enthusiasts, DIY handyman , maker, artist and small businesses

User questions & answers

Question:	What is the difference between the black, gold and green engravers? each one is like between $30 and $180 difference
Answer:	I purchased a cord to plug into the BD Veritor machine. It works great this way, but I have not tried any other way to operate it.
Question:	How do you center the item
Answer:	Yes. It will print 12 x 12 borderless. I print 12 x 18 all the time. You will probably have to get 13 x 19 paper and cut it down to size. I don’t know of anyone who makes 12 x 12 paper. It’s not a standard size.
Question:	What’s email
Answer:	It can do up to 13 × 17
Question:	Can this engrave on textiles like tshirts, hoodies? Also what type of color powder can it use with
Answer:	It’s a printer, it doesn’t connect to the internet. It does connect to your home wifi so you can print wirelessly. Connect the printer to your router and that should work.

Product features

Laser Engaved Wood

Laser Engaved Leather

Laser Engaved Fruit

Laser Engaved Felt

Easy to Use & Locate The Engraved Position

Easy Start: Power & Connect with LaserPecker app by powerbank, choose or upload any pattern in-app and edit it

Preview Mode: LaserPecker Pro will first show a square on the target surface,which users can easily adjust the engraved size and position

Smart App

You can upload any pictures, create any patterns/text to the LaserPecker APP to engrave

It allows you to modify the pictures or drawings before engrave.

JPG / BMP /PNG /G-code,Photo/Vector both supported

In-App Editing Mode Setting

Choose a picture from your phone and choose your favorite mode according to different processing effects.

Engrave times will also depend on this factor.

More Fonts

More Fonts can be choose to create your idea

Engaved Horizontally

NO limit on Engraving Height

Engaved Vertically

Recommended Focal length: 190mm-200mm（ the distance from laser mirror plane to the surface of engraved item）

Powered by Power Bank

The compact laser etcher can be take anywhere and powered by power bank;

Laser Engraver Protective Case

Working warning alert, motion-trigged stop, overheat shutdown, password lock will keep you safe from accidents

Product description

3000mw laser class 4 DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions.

carved more material. It can carve the IC card, mobile phone case, wallet, dark plastic, wood (thick or thin), bamboo, kraft paper, acrylic, transparent and other things can be carved, but must first do black Paint coat.(It can’t carve metal or glass).

Picture format: JPG / GIF / BMP / DIB / ICO / CUR /PNG

Operating System: WIN-97/03/7/8/10 （▲Windows Vista / XP）

Greater Power, Faster Speed, More Accurate Precision, If you are a true Maker, DIY Handyman or an artist, this machine offer a great way to that

• GanGou Laser Engraver Off-line 3000mW laser class 4 engraving machine Engraving range: 17.5*15.5CM(6.8*6.1 in)
• carved more material. It can carve the IC card, mobile phone case, wallet, dark plastic, wood (thick or thin), bamboo, kraft paper, acrylic, transparent and other things can be carved, but must first do black Paint coat.(It can’t carve metal or glass).
• Operating System: WIN-97/03/7/8/10 （Does not support MAC）,Picture format: JPG / GIF / BMP / DIB / ICO / CUR /PNG
• Greater Power, Faster Speed, More Accurate Precision, If you are a true Maker, DIY Handyman or an artist, this machine offer a great way to that
• We provided one-year warranty, and full life customer service. If you have any questions about this engraving machine, please contact us, we will reply to you in 24 hours.

User questions & answers

Question:	how tall can the object be too engrave
Answer:	We have found that if the supports are placed on higher surfaces than the item we're engraving it works...as long as it's level.
Question:	do I need to have a software or it comes with it ? if I need to have a software , which one ? any free stuff online ? thank you
Answer:	To create your images, you will need to be able to save your images in BITMAP or bmp format. Most image editing software can do that. All basic image editing programs can do that. There are lots of FREE online image converter software options. Just do a search and you'll find many.
Question:	Can you laser engrave tshirts
Answer:	How would you engrave a shirt? Smh
Question:	What does ‘first must do top black paint coat’ mean
Answer:	It’s for reflective surfaces. If the laser hits a reflective surface, it will bounce back. It can reflect off and project the laser in other directions. Very dangerous. Always coat reflective surfaces in black washable paint. Or a dry erase marker. Then wipe it away. This will not cut through transparent materials. You need a CO2 laser for that kind of job. The blue diode laser will pass straight through the material even if you coat it with painters tape or black paint. It will only go as deep as an etching.

• ✅【More Convenient and faster】Off-line and APP Wireless Control. 360°Engraving, High Speed, save more time. Cloud Gallery and Online Gcode Makes Creation Easier.
• ✅【Only Support NEJE Software】Working area: 110 x 120 mm Engraving Range. Operating System: windows 7/10 / android / iOS / ipadOS/ macOS. Picture format: BMP / PNG / JPG / NC / DXF,etc.
• ✅【Safe To Use】Built-in MEMS sensor protection, when accidentally touched, the machine will automatically stop working.
• ✅【Carved Material】It can carve MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc.(Not suitable for iron or other metal)
• ✅【NEJE Service】We provided 1-year warranty, and full life customer service. If you have any questions about this engraving machine, please contact us, we will reply to you in 24 hours.

User questions & answers

Question:	Can i use in pcb printing
Answer:	yes. it can.
Question:	Does it engrave metal
Answer:	No. It cannot engrave iron and other metals.
Question:	Will it work with a chromebook
Answer:	Sorry. It can only support NEJE software. Other professional engraving software, we will continue to update in the future.
Question:	Cutting/engraving best
Answer:	Cutting is not the best. Best engraving pattern, mini Logo

Product features

NEJE High Speed mini Engraving Machine with Wireless APP Control - 110 x 120mm - Roll Protection

• High Speed mini Engraving Machine,2.5W Output Optical
• Control Board: 2 x MCU + Wireless control + MEMS
• Satety Protection: MEMS
• Working Size: 110 x 120 mm
• Pixel: 1466 x 1600 px
• Dot pitch: 0.075mm

NEJE APP for Android, NEJE Wireless APP for iOS / macOS, windows. (NOTE: Mini machine is not compatible with LASERGRBL,Benbox,LightBurn software, if you want to use it, please choose MASTER 2 engraving machine.

Super Optical Lens Focus

• Minimum Parameters Focus point: 0.01mm
• Better focus on carving out works.

Best Function

• Want to present grayscale photos, patterns, cards.
• Best for children and family DIY photos, greeting cards, drawings.

All protection

• Built-in Mens Sensor Protection
• when accidentally touch the machine,the machine will automaticcally stop working

Package Included：

1 x Mini Engraving Machine; 1 x USB Cable

1 x 12V2A Power Adapter(US) ; 1x goggle；1 x Manual

1 x ON/OFF Switch Cable; 1 x Eu adapter; 1 x L-shaped wrench

2 x Test Paper; 1 x wooden block; 1 x Focusing plate

Product description

LaserPercker Pro engraver gives you the ability to engrave all of your personal belongings without the cost and time of seeing an engraving specialist.



The compact laser engraving is a great way to mark your belongings as your own. It’s widely used in Engraving, Carving, Etching,Cutting and more.



Laser Source:

Dimensions：65*61*53mm

Weight；190 g

Laser Source； 500 mW SHARP 405 nm Blue-Violet Laser

(The luminous power of focusing energy is 1500mw.)

Life Span＞ 10000 hours

Laser Output； Power0-100%

Case Material； Anodizing aluminum alloy

Color； Space Gray

Bluetooth Version； BT4.0

Support Format； G-Code ,bmp,Jpg

APP Connection； BLE (Bluetooth Low Energy)

OS； iOS 10+ / Android 4.4+

Power Supply；TYPE-C  5V, 1A

Compatible； with power bank (5V, 1A)

Operating Temperature;5 ℃ - 40 ℃

Operating Humidity; 5 % - 80 % (non-condensing)

Certifications; IEC 60825-1 (Laser Safety Class Ⅰ), CE,FCC, and FDA CDRH registered.IEC 60825-1 (Laser Safety Class Ⅳ) (Separately use without shield)



Support Stand;

DimensionsFolded: 195*153*25mm

Working: 195*153*（198~293）mm

Weight; 860 g

Ranging Laser Source; 940nm TOF ranging laser

Project & Locating Laser Source; 635nm Visible red laser

Elevating Motor

Fume Extraction Fan; DC speed-feedback gear motor

Power Supply; High speed DC brushless motor fan

Material; TYPE-C 5V, 2A

Color; Anodizing aluminum alloy

Operating Temperature; Space Grey

Operating Humidity; 5 ℃ - 40 ℃; 5 % - 80 % (non-condensing)



What You Get:

 1 * Laser engraving machine

 1 * Protective glasses

 1 * Type-C cable

 1 * Tripods

 1 * Adapters

 1 * User Manual

1 * Auto-focusing Support Stand(Suit)

4 * Magnetic Protective Shields (Deluxe)

1 * Big Case (Super)

• 【Wide Application】LaserPecker pro engraver with small & lightweight design engraves on a wide variety of materials, like Paper-board, Fabric, Wood, Leather, Felt,Cloth,Fruit and more. The Easy Etcher can widely be used in Engraving, Carving, Etching etc. 【Note】Plastic : Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off. 【Cannot 】for Stone,Metal,Glass
• 【 In-App Editing & Preview Mode to Control Smartly & Work on nearly any surface and tiny objects】 In-App Editing Mode allow to create any patterns and words, modify the pictures or photos to engrave, features many picture editing toors; Preview Mode will let users can easily adjust the size, position, and the rotation angle of the pattern on the target surface by projecting a guide laser before engraving；This unique laser etcher can engrave on any surface or on tiny objects
• 【More Accurate Precision】LaserPecker Pro has 0.15mm accurate light spot and high quality 405nm blue-violet laser, making accurate precision engraving; NO limit on Engraving Height; Works with powerbank; Wirelessly bluethooth controlled by a smartphone; 10,000 + lifespan built for long-term usage; Engraving range: 100*100MM; File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported.The most compact and easy-to-use laser engraver of its kind
• 【More Accessories can be Choosed 】 Auto-focusing Support Stand: The built-in sensors of the stand will measure the distance in seconds and automatically adjust laser focal point to the right height； Magnetic Protective Shields: Protect your eyes and directly see laser movements in the progress of engraving without wearing protective glasses： Big Case : Take all accessories in one easily.
• 【Safe and Guarantee】LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles; Safe Certification: CE, FCC, FDA, RoHS，CDRH,IEC 60825-1 (Laser Class1)，IEC 60825-1 (Laser Class 4) ; 30 days free replacement parts ,1-year warranty, and full life customer service

Product features

Laser Engaved Paper

Laser Engaved Leather

Laser Engaved Wood

Laser Engaved Cloth

Laser Cut Paper

Use G-code with Inkscape to cut the paper more easily and fast

Laser Engaved Color Paper

Painted the paper with color powder first to engrave then blow it away

Laser Engaved Color Wood

Engraved a few butterflies first and colored with iridescent paints

Laser Engaved Plastic

Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off

Easy to Use & Locate The Engraved Position

Easy Start: Power & Connect with LaserPecker app by powerbank, choose or upload any pattern in-app and edit it

Preview Mode: LaserPecker Pro will first show a square on the target surface,which users can easily adjust the engraved size and position

Smart App

You can upload any pictures, create any patterns/text to the LaserPecker APP to engrave

It allows you to modify the pictures or drawings before engrave.

In-App Editing Mode Setting

Choose a picture from your phone and choose your favorite mode according to different processing effects.

Engrave times will also depend on this factor.

Fonts

More Fonts can be choose to create your idea

Auto-focusing Support Stand

LaserPecker Pro is upgraded with an auto-adjusting support stand that sets up and focuses in seconds.

All you have to do is put the engraving target on the spot.

The built-in sensors of the stand will measure the distance between the laser generator and the target and automatically adjust the height to make sure the focal point is the correct distance from the surface of the object.

Portable & Longterm Usage

LaserPecker is the most compact and easy-to-use laser engraver of its kind. Just grab it and put in your bag, your pocket art studio is ready to work anytime and anywhere.

Safety

LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles etc

Big Case

LaserPecker Pro can be put in one bag to take it everywhere, which you can engrave what your want anytime

• ✅New eye protection design:The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
• ✅Solid and easy installation structure design:The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes.
• ✅Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
• ✅Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
• ✅Precise scale lines axis :There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.☆☆☆Please note: to engrave stainless steel, the surface must be painted black first, and it can be wiped clean after engraving.

User questions & answers

Question:	Is there a suitable offline controller that works with this
Answer:	I too bought this router only to find out the controller is junk. I am using an Arduino along with the tb6600 stepper motors. Using grbl to run g-code
Question:	Does this have prime shipping
Answer:	We will ship it by UPS from U.S. warehouse. It usually takes 4-6 business days for delivery. Thank you!
Question:	I just received my new 3040 cnc router. I have issues when I trying to assemble; all three axis are not moveable. Any suggestion
Answer:	Problemas con el enlace con la computadora, no es compatible con Windows 10 ,no me reconoce el puerto usb
Question:	Can this machine be plugged into a 110 volt outlet
Answer:	Yes, it is U.S standard 110v machine.

Product features

Eye protection design

The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.

Solid and easy installation structure design

The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes.

High-performance fixed-focus laser

no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.

Wide compatibility

The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

Precise scale lines axis

There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.

Widely applicable materials

Carving Objects:All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal

Cutting Objects:Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.

5W Output Laser High-energy Cutting

Full body metal structure

Actual work display

Package Included

1 x X-axis assembly

2×Section 57CM

2×Section 48CM

1 x control box

3 x support legs

1×Goggles

1 x laser

1×24V2A power adapter

1 x power cord

1 x USB cable

Product description

Wavelength: 450 nm (blue)

Power: 500 mW

Voltage: 12 V (DC)

Working current: 2,100 mA



Warning:

- A Laser is capable of damaging your eyesight, skin and other people.

- Please read and follow this guidebook carefully before use the laser kit.

- The eye protection is need when you work with the laser kit.

- The magnets on the laser head is very strong but brittle.

- Laser engraving/cutting can case smoke, depending on the workpiece, it is necessary to place your machine at a well-ventilated environment.

• It is suitable for Ender 3 / Ender 3 Pro / Ender 5 / Ender 5 Pro 3D Printer.
• The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances. It can also cut wood and acrylic, depending on the wattage.
• Easy to Use: The laser engraving head kits run from the fan port on the machine and are usually quick to assemble.
• Power Supply: 12/24V.
• Comgrow's laser kit is only for engraving due to its 500 mW laser.

User questions & answers

Question:	Does this come with protective glasses
Answer:	Yes. It comes with Green tinted safety glasses.
Question:	will this work on parkerized aluminum
Answer:	Aluminum cannot be parkerized... this laser will not work on aluminum either way... I’ve tried painted aluminum and that didn’t work either
Question:	Will this connect to a cr10 max or a Ender
Answer:	The device thus far connects to the cooling fan port on the hot end. So, yes I would assume. It's slicer independent as it has it's own.
Question:	Does this laser support variable power output through different fan speeds
Answer:	Output of fan is 12volt. The laser intensity is controlled by fan speed. 0 is off. 255 is full power

Product description

Specifications

Engraving Depth: 2mm

Laser Head Lifespan: 10,000 hours

Engraving mode: bitmap engraving, bitmap gradation engraving, contour cutting, black and white image, grey-scale map, reverse, seal

Image format: JPG, BMP (24bit), TIFF, PNG (below 32bit), PCX (8bit and 24bit), PCD

Operating system: Windows, Android, iOS (computer software can be compatible with mac OS)

• The small size can be simply set on the desktop, the bracket can be disassembled and assembled, and the bracket can be used as goggles, saving transportation space. Appearance of fashion patents and up to 8 software copyrights. Through mobile power and DC power, you can engrave anytime and anywhere
• 1600mw German OSRAM unique laser chip and efficient heat dissipation and precision glass lens combination, without manual focus setting. The output of the laser head is stable, can work continuously for more than 10,000 hours, and the engraving depth can reach 2mm. The engraved pattern is improved by the sophisticated XY module, and it is not easy to fade. Replaceable laser head
• Carving: wood, ceramics, cardboard, cardboard, bamboo, leather, fruit peel, fruit core, rubber, plastic, metal surface coating, cutting: goat skin, paper card, non-woven fabric, EVA, etc.
• The mobile APP (mini laser engraving machine) has rich functions and is continuously updated. Multi-layer editing, text editing, eraser, free Jesto zoom, accurate setting of size and coordinates. APP includes firmware upgrade, users use APP, function is repeated, product upgrade, original packaging can be updated. If you use the storage function, you can save the photo to the phone's album

User questions & answers

Question:	What is the engraving range (area
Answer:	working picture 98x88mm In addition, this machine has excellent fast engraving mode
Question:	Could I engrave baseball bats with this
Answer:	sure， it can engrave on wood. paper. plastic. leather. and colored metal
Question:	Can you import custom logos and/or photos
Answer:	Yes, you can add any of your own pictures. And this machine also has fast engraving mode. You can have a try.
Question:	Can you engrave a urn for human ashes
Answer:	/Duration 0:26Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:26 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } yes , if the material is glass or ceramics then okay , but need put a black thin film on its surface

• 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient.
• 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS)
• 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw original laser chip can focus manually. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm, the engraving range: 3.8“*3.4“, the laser engraving range: 30mm-80mm, and the engraving resolution: 508dpi. The precise XY module makes the engraved patterns better and not easy to fade. The laser head can be replaced.
• 【EXCELLENT SAFETY PROTECTION】THE LASER WILL STOP WORKING IF THE ENGRAVING CUTTING MACHINE SLANT OVER 30 DEGREE. A gyroscope is added to the engraving machine, which can automatically stop engraving when any abnormal movement occurs. After restoring the position, you can click the APP to continue carving. The bracket of the laser engraving machine and goggles can protect the eyes. The aluminum base can prevent the engraving machine from burning down the bottom of the desktop.
• 【COMPREHENSIVE AFTER-SALE SERVICE】We offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google and will easily find out our Comgrow brand page you can get more professional DIY skills from our video operation guidance but also can join our team to share every moment you work with our products with others.

User questions & answers

Question:	It appears that this engraver will 2-inch thick wood as long as there is a stable platform. Is this correct
Answer:	hi, Thanks for your good question, yes, our carving tool can engrave on 2-inch thick wood, if you do laser cutting, the machine can only cut the wood within 1mm.
Question:	can you engrave on silicon watch band
Answer:	yes, but that can not be white. The parameter settings on APP can be: Power 100, speed 90
Question:	I have an android phone but can not find the correct app on google play. Can you link me to it? thanks
Answer:	Dear friend, Thanks for your question. Fist, can you let us know what kind of phone you used and is any app store for your phone, you can search "laser engraving machine" there. Second, here is the link for our android and computer, you can go to this link and download the name "LaserEngraveAndroidAPP.apk"
Question:	Please, can you show how it works on aluminium pet tags
Answer:	Thanks for your question, you can watch our video "Comgrow Mini Laser Engraving Machine" from 1:34 to 2:07. That will show how our laser engraving tool works on aluminium pet tags step by step, by the way, if you like, you can email us the information you want to engrave, and we can do one ID tags by our Laser engraver machine and send to you free.

Product features

Comgrow Laser carving tool can also engrave the GLASS

The metal (aluminum oxide) must not be natural, and the surface must have a coating. The pattern effect is achieved by laser burning the surface coating (that is, the color of the coating is different from the natural color of the material)

• LE-4040 engraver machine has a 15W, Class 4 laser unit, which can engrave and cut different kinds of material such as plywood, carboard, leather, acrylic, MDF etc. The laser focus is adjustable. Use Protective Eyewear while operating.
• Laser power range is S0-S1000. The maximum engraving speed is 3000mm/min. The X and Y axis are belt driven, which helps to reduce working noise.
• 10-20 minutes to fully assembly. Main parts are pre-assembled and no complicated installation. Simple and easy to start for both professionals and beginners.
• It is compatible with GRBL software such as Lasergrbl, Grblcontrol (Candle), Lightburn etc. It supports windows XP/7/8/10, Linux and Mac OS.
• This engraving machine has a large working area of 40 x 40 cm (15.75 x 15.75 inches), which is competent for daily engraving works. For metal, it can engrave on the metal with painted surface.

User questions & answers

Question:	Is the z-axis adjustable
Answer:	No, the Z-axis is fixed on the frame. But there are screws on the laser frame holder so that you can adjust the laser's height.
Question:	What software do i need
Answer:	laserGRBL is free or you can use Lightburn (30 day free trial with paid license to follow)
Question:	Can this engrave metal or does it only engrave the paint that is on the metal? I want actual engravings in the metal itself
Answer:	It can only engrave on the paint. If you'd like to engrave on the metal itself, you may need to paint some laser ink on the surface.

Product features

Features

LE-4040 is designed with fast assembly and simple using. It enables hobbyists, amateurs and even beginners to explore the engraving world, to create their own works and have fun!

15W Module

GRBL Control Board

The control board supports all grbl software such as Lasergrbl, Candle, Lightburn etc.

High Accuracy

The engraving accuracy reaches to 0.1mm.

Package List

• 1x LE-4040 Engraving Machine (Main Parts Pre-installed)
• 1x 15W module
• 1x Power Supply
• 3x Hex Wrench
• 1x USB Cable
• 1x U Disk
• 1x Goggle
• 1x User Manual
• Packs x Screws