10 best gorilla adhesives
Product description
Our STRONGEST construction adhesive, Max Strength Clear combines the strength and versatility you have come to expect from Gorilla with a crystal clear, easy to use, non-foaming formula. All Surface, All Purpose. Bonds: Glass, Mirrors, Ceramic, Stone, Landscaping, Decks, Subfloor, Drywall, Trim/Molding, Paneling, Foam board, Laminate, Tile, Wet Surfaces, Fiberglass, Tub & Shower, Marble, Gramite, Wood, Flooring. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.
- OUR STRONGEST Construction Adhesive Formula - 2X Stronger than Gorilla Heavy Duty Construction Adhesive Ultimate.
- DRIES CRYSTAL CLEAR
- 100% WATERPROOF and works under water
- Incredibly durable in ALL WEATHER situations
- REPOSITIONABLE, GAP FILLING, PAINTABLE, EASY TO DISPENSE
- LOW ODOR
- BONDS: Glass, Ceramic, Stone, Tile, Wet Surfaces, Landscaping, Decks, Trim/Molding, Metal, and More!
User questions & answers
Question: | Does this work on efis (faux stucco) outside my house? Thank you |
Answer: | I use this to glue together landscaping blocks that I use around my flowerbeds and this adhesive works better than landscaping block adhesive. I like it too because it’s clear and not gray like landscaping adhesive. It’s the strongest and best exterior adhesive I’ve used so far and I’ve used several different types. I think it would work great for your application. |
Question: | I don't have the cartridge gun device - can the tube still be used/squeezed easily without it |
Answer: | I used it both ways. I needed a little glue, and was too lazy to get the cartridge gun. I used a wrench to push it up for the amount of glue I needed. The gun gives you more control though. |
Question: | After use how seal does can use second time |
Answer: | I just put a piece of duct tape across the tip of the nozzle to seal the tube.I have done this many times after using caulk products and it usually works well. Hope that helps. |
Question: | Will it bond acrylic sheet to steel frame |
Answer: | probably yes. Try a sample. If you can, sand the acrylic lightly at the glue bond area, same for the steel. 220 or 150 grit... It will bond well, but good idea to remove surface oils to allow glue to bite into both surfaces. Im very optimistic. |
Question: | Will this product cover a chip on a snow white desk |
Answer: | Yes but you might want to use the thicker marker more like a crayon vs the marker one |
Question: | If using on wood floor to correct small marks, can you polyurethane over the Crayon/Markers |
Answer: | I don’t see why not, that is if you using the marker, the poly would keep it from rubbing off |
Question: | Are these waterproof? Can they be used for bathroom cabinets? What happens if water often drips down on them |
Answer: | Sorry, my needs have not included "waterproof", however the quality of the colors/coverage is an excellent match. As I check the package I see no qualifiers for this. Here is the manufacturer's Q/A email address for your convenience: [email protected]. Good Luck. |
Question: | Does this work on brown laminate floors |
Answer: | While I don't have direct experience with this brand I have used many other brands of the exact same products. People like that Fred guy calling things glorified pens and crayons shouldn't be listened to. He clearly couldn't be bothered to do any research and learn how to use the products and to get good results you need to put in effort and learn the general idea of how to use them. It's not just rub wax in the scratch and color over with a marker. With that said there is a chance these will work on your floor and look great but I don't know what type of "markers" are in this package. If it has the resin markers they do have a decent shine and depending on the damage you are looking to cover up it could be enough to make the damage not noticeable. Personally I would recommend looking for a stronger filler and "paint" system since you are working on a floor. These marker and wax kits are nothing more than a temporary cover up. In my younger years I worked for a furniture company and we used things like this as well as other things to cover and damage that may have come factory on the furniture or damage caused by us. The idea of stuff like this is to make it look new and last a a couple wipe downs after the customer gets it home so the customer thinks they caused the scratches after a week when they wiped all the soft painted wax away thanks to cleaning. A few good scratches could turn a 1998 $1400 couch in to a $600 couch. I spent a lot of hours a day with a fine paint brush painting wood grain with a fine brush over wax filled cracks and scratches to keep all the furniture looking perfect. Never have we had a customer think the scratches came new when they bought something but twice I remember customers coming back some time later to buy something else and they both made a comment about how easily their expensive furniture got scratched. I don't think it is the right thing to do but I was young and it was my job. This stuff just doesn't last and is not good for a surface that is being walked on. A resin marker is fine but for a floor you need a more solid a permanent filler. |
Product description
Gorilla Heavy Duty Construction Adhesive is a tough, versatile, all-weather adhesive. It’s 100% adhesive formula provides a long-lasting, heavy duty bond. We call it All Surface, All Purpose. The durable, 100% waterproof formula holds up indoors and out and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foam board, marble and more! Directions: All surfaces should be clean and free of dirt, grease and oil. Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors. 1. Unscrew nozzle, cut tip of cartridge, replace nozzle and cut to desired bead size. Insert into cartridge gun. 2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps. 3. Within 10 minutes, press surfaces together and hold for 20-60 seconds. For smaller product check out our 2.8oz Construction Adhesive Tube. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.
- Imported
- Strong, versatile and durable construction adhesive that bonds virtually everything
- Best for building and home improvement projects, both indoors and out
- Fast grab; Holds in 30 seconds
- All weather; Indoor and outdoor use
- VOC compliant; Low odor; 100% adhesive; No solvents or water
User questions & answers
Question: | When this adhesive dries up, does it get hard or is it felxible |
Answer: | Hello DJ O-ROD,Gorilla Heavy Duty Construction Adhesive will remain somewhat flexible to allow for expansion and contraction of the substrates. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company |
Question: | Is this urethane based |
Answer: | Hello Stephen,Gorilla Heavy Duty Construction Adhesive is not urethane based. For further assistance, please contact our Consumer Affairs department at 800-966-3458 or through our website at http://www.gorillatough.com/contact. Thank you,The Gorilla Glue Company |
Question: | Will this work if i would like to mount a mirror to the wall? And do i need to use it with that dispenser |
Answer: | Yes will work for mounting a mirror just need to support till the adhesive dries. And yes you will need a gun to get the adhesive out of the tube |
Question: | How long does this take to bond? I can't get it to stick |
Answer: | I used it to put up sign letters in humid weather. It took about 3-5 minutes to set and within 30 minutes each letter was secure. Bonus was that an hour after I did the job we had one of our FL surprise torrential downpours. It rained for several hours. I was just sure that I would find all the letters of the sign on the ground the next morning, but they were still in a straight line secured to the wall. This is not the product I use for that kind of job as a rule, but I was in a bind so gave it a shot. No complaints. |
Product description
Our most durable construction adhesive, this Ultimate formula is tough,versatile, and 100% waterproof. It instantly grabs surfaces and offers an even higher bond strength than Gorilla Heavy Duty Construction Adhesive.
- OUR MOST DURABLE FORMULA – Tough, Versatile, & 100% Waterproof
- INSTANT GRAB, holds in 0 seconds
- WORKS UNDER WATER
- PAINTABLE
- GAP FILLING
- BONDS: wood, drywall, plaster, ceramic, concrete, masonry, foamboard and more!
User questions & answers
Question: | What is the coldest temperature this can be applied in? i plan on using it to secure a rubber garage door seal to the concrete but it is already -5 c |
Answer: | No sir, 749 or the 1r-750 (shorter version of the 749) is a 2 micron filter and the Baldwin is a 10 micron plus water separator filter. I use both at the same time. Bf1212 is a pre-filter to the cat filter. |
Question: | Will this bond cedar plank to foamular |
Answer: | I have multiple vehicles 2 of which use this filter, one has a water in fuel light in the instrument cluster, I’ve only had it light up once in 12 years. I usually change the filter every 20K miles and haven’t drained it, I purchase my fuel at high volume turnover places like TA/ pilot sapp brothers ect |
Question: | Can I join metal with stone? (Fireplace door application |
Answer: | Yes. I'm using this filter with a 2000 f350 7.3 diesel on the suction side with no problems. There are several kits out there that use this same filter on the suction side also. |
Question: | Is attaching 24 lbs. of powder-coated free-hanging steel to powder-coated aluminum too much weight for this Gorilla glue |
Answer: | Here is the specs from the MFG.BF1212 (fuel water sep) 20 microns absolute, average efficiency of 86.34%, Water stripping: 97-99% free water, 92-95% emulsified water. And it has a dirt holding capacity of 35.9 grams, 579.0 sq in of filtration media, and a flow rating of 210gph.Descriptions: Fuel/Water Separator Spin-on with DrainNotes: CAUTION: Furnished D-Ring must be installed on post for seal. Can be used with FB1311 base.Use_With: BF1212 FOAMFits: Cummins EnginesReplaces: Cummins 3308638Thread: 1-14O.D.: 3 11/16 (93.7)Length: 7 7/16 (188.9)F. Gskt.: ES24-DI. Gskt.: G381-ARelated To: BF957, BF957-D (Fuel Versions)UPC: 791440011496 |
Product description
Gorilla heavy duty construction adhesive is a tough, versatile, all-weather adhesive. Unlike other construction adhesives, it's 100% adhesive formula provides a long-lasting, heavy duty bond. We call it all surface, all purpose. The durable, 100% waterproof formula holds up indoors and out and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foam board, marble and more. Directions: All surfaces should be clean and free of dirt, grease and oil. Best if used above 40°F. 1. Unscrew nozzle, cut tip of cartridge, replace nozzle and cut to desired bead size. Insert into cartridge gun. 2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps. 3. Within 10 minutes, press surfaces together and hold for 20-30 seconds. NOTE: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors. 4. Allow 24 hours to cure. Note that cure times will increase with lower temperature, humidity and if bonding non-porous surfaces. Gorilla Construction Adhesive is best if stored in a cool, dry location. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.
- TOUGH, VERSATILE, and WATER-RESISTANT – Provides a long-lasting, heavy duty bond
- FAST grab, holds in 30 seconds
- REPOSITIONABLE
- PAINTABLE & FLEXIBLE
- LOW ODOR
- VOC Compliant
- BONDS virtually everything, including wood, drywall, ceramic, tile & more!
User questions & answers
Question: | Can this be used to attach plastic to concrete |
Answer: | I bought it's filter for my 2011 cummins (air dog filter system ) everything I found on line for this part number suggested it was 2 micron. |
Question: | Will this bond to abs plastic like in automobile trim pieces |
Answer: | For a general rule of thumb 15,000 miles if it’s going on a light duty diesel pick up truck |
Question: | If two flat surfaces of substantial size are are glued together, how can the glue in the center cure without air contact |
Answer: | 4 microns nominal and an absolute 20 microns. Nominal means 50-90% of the time it catches the debris. The absolute means 98% of time it catches debris. Unlike a 4 micron absolute filter such as a BF 7633. This has a lower nominal rating because it’s meant to separate water from fuel. However, I can catch debris as small as 4 microns. |
Question: | Can this be used to glue the legs onto a concrete outdoor bench |
Answer: | 1-14 thread is what the Baldwin website shows. Heavy Truck Parts of WI |
Product description
The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.
- Crystal clear
- Non-foaming
- Water resistant
- Incredibly strong
- Easy to use
User questions & answers
Question: | I need to secure some metal screw bushings for a guitar bridge. With this bond or secure the metal bushings into the wood of the guitar |
Answer: | Hello, Clear Gorilla Glue will work on metal and wood surfaces. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #269461. Thank you, The Gorilla Glue Company |
Question: | Will this work to glue edges of linoleum in our camper |
Answer: | Hello, Clear Gorilla Glue will work on linoleum. The application will need to be clamped for at least two hours. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #370123. Thank you, The Gorilla Glue Company |
Question: | Is there a low viscosity version of this glue or can it be thinned. I want to adhere some tinted, translucent plastic film to glass. Thanks |
Answer: | Hello, Clear Gorilla Glue cannot be thinned. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #293416. Thank you, The Gorilla Glue Company |
Question: | Will this work on a terracotta planter |
Answer: | Hello, Clear Gorilla Glue will work on terracotta, however, it is water resistant and not waterproof. If we can be of further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #232709. Thank you, The Gorilla Glue Company |
Product description
Gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Click on the Gorilla link at the top of the page to see more great products from The Gorilla Glue Company.
- No run control gel formula; Great for use on vertical surfaces
- Anti-clog cap: Keeps glue from drying out, its Gorilla tough use after use
- Impact tough: Unique rubber particles increase impact resistance and strength
- Fast-setting: dries in 10-30 seconds, no clamping required
- Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more
User questions & answers
Question: | Can you glue something to the wall |
Answer: | Hello, Gorilla Super Glue Gel will work on most surfaces and has a thick consistency, which makes it ideal for vertical applications. So we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website, found in our profile, and reference case #379223. Thank you, The Gorilla Glue Company |
Question: | Would this bond steel to wood |
Answer: | Hello this is Christopher Stafford of Reflections thanks for your message and interest, unfortunately I wouldn’t recommend this particular unit. I would recommend an epoxy resin for a strong bond. Thanks again for your message. |
Question: | How does this perform in consistency and performance to Loc-tite gel control |
Answer: | I prefer the gel control |
Question: | Does this work on glass |
Answer: | Hello, We do not recommend using Gorilla Super Glue Gel on glass. Due to alkalinity in glass, the bond will weaken over time. So we can help, please contact our Consumer Affairs team at 800-966-3458 or the website listed on the back of the packaging and reference case #371617. Thank you, The Gorilla Glue Company |
Product description
Gorilla Super Glue Gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications.
- GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
- ANTI CLOG CAP: Helps keep the glue from drying out. It's Gorilla tough use after use
- IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
- FAST-SETTING: Dries in 10-45 seconds. No clamping required
- VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials
- Non-greasy
User questions & answers
Question: | Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible |
Answer: | Probably. I have narrower feet and they fit me. |
Question: | EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks |
Answer: | Probably, the soles are a soft smooth suede like material. Concrete will tear them up fast, wood would be a much better surface for moonwalking. |
Question: | Will it glue leather to metal |
Answer: | They fit just perfectly. Im 9.5 and i just order 8.5. I recommend that you choose 1 size less or 1/2 less for your perfect size |
Question: | What's the difference between their super glue gel and their super glue |
Answer: | They are not. Both shoes have sliding pad on them, so it perfect for both right and left handed bowlers. I have 3 pair of them and they're the best one for your money unless you willing to spend more money on the Dexter sst series. |
Product description
The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.
- Crystal Clear
- Non-Foaming
- Water Resistant
- Incredibly Strong
- Easy to Use
- Bonds Virtually Everything: Wood, Stone, Metal, Ceramic, Foam, Glass & More
User questions & answers
Question: | Will this dry hard or flexible |
Answer: | Hello, Clear Gorilla Glue dries slightly flexible. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #293837. Thank you, The Gorilla Glue Company |
Question: | Will it glue my tennis shoe soles back on |
Answer: | I glued my wife's chanklas with it when the part that goes between the toes came out & it's still holding. She wears them quite a bit. |
Question: | Will the Clear Gorilla Glue, yellow over time |
Answer: | Hello, Clear Gorilla Glue is UV resistant. Long term testing shows that Clear Gorilla Glue remains clear over time. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #332869. Thank you, The Gorilla Glue Company |
Question: | How do i open for the first time |
Answer: | Hello, To open, cut the tip of nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #327086. Thank you, The Gorilla Glue Company |
Product description
Our STRONGEST construction adhesive, Max Strength Clear combines the strength and versatility you have come to expect from Gorilla with a crystal clear, easy to use, non-foaming formula. All Surface, All Purpose. Bonds: Glass, Mirrors, Ceramic, Stone, Landscaping, Decks, Subfloor, Drywall, Trim/Molding, Paneling, Foam board, Laminate, Tile, Wet Surfaces, Fiberglass, Tub & Shower, Marble, Gramite, Wood, Flooring. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.
- OUR STRONGEST Construction Adhesive Formula - 2X Stronger than Gorilla Heavy Duty Construction Adhesive Ultimate.
- DRIES CRYSTAL CLEAR
- 100% WATERPROOF and works under water
- Incredibly durable in ALL WEATHER situations
- REPOSITIONABLE, GAP FILLING, PAINTABLE, EASY TO DISPENSE
Product description
Incredibly tough & versatile, Gorilla Hot Glue Sticks provide a long term hold even on hard to bond surfaces. The clear adhesive works with both high and low temperature glue guns and features an extended working time for added convenience for all types of projects. Gorilla Hot Glue is also weather-resistant and incredibly durable, keeping your projects safe from seasonal temperature swings that can cause other glues to fail. Directions: 1. Use either low or high temp glue gun, per glue gun instructions. High temp: use with high hemp guns for strong bonding: wood, plastic, metal, glass, and more! low temp: use with low temp guns for delicate surface materials: floral, fabric, foam, jewelry, and more! 2. Test product before its intended use. Working time is dependent on amount of glue applied and temperature of glue gun. Full size sticks are 0. 44 in. Diameter and mini size sticks are 0. 27 in. Diameter. Mini size sticks should be used in mini size glue guns capable of dispensing 0. 27 in diameter sticks. Full size sticks should be used in full size glue guns capable of dispensing 0. 43 in diameter sticks. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.
- Weather Resistant: For Indoor and outdoor use
- All Temperature: Safe for both high & low temperature glue guns
- 45 Second Extended Working Time
- Low Temperature for Delicate Materials, High Temperature For Strong Bonding
- Versatile: Works on hard to bond surfaces like metal & glass
User questions & answers
Question: | Is this glue good to use for Minnie ears |
Answer: | Hello, Gorilla Hot Glue Sticks Full Size are compatible with glue guns that are capable of dispensing sticks with a diameter of 0.44". If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #228833. Thank you, The Gorilla Glue Company |
Question: | From what chemical (plastic, wax etc.) are these sticks made |
Answer: | Hello Fresno,Our Gorilla Hot Glue Sticks are 5x more durable when used in a high-temp glue gun, keeping your projects safe from seasonal temperature swings. Gorilla Hot Glue Sticks are weather-resistant, and work well on dissimilar surfaces and gap-filling applications. For further assistance, please contact our Consumer Affairs department at 800-966-3458 or through our website at http://www.gorillatough.com/contact.Thank you,The Gorilla Glue Company |
Question: | Can these glue sticks be used in Aleene's glue gun |
Answer: | There is a power button on the top back that I had to use to get it to dispense glue. |
Question: | Can anyone confirm that these are really 5x more durable than ordinary hot glue sticks? (note they state "more durable", not "stronger |
Answer: | Yes, this glue gun come with a charging cable and a charger. |
Latest Reviews
View all
Muslim Books
- Updated: 28.05.2021
- Read reviews

Vitamins For Diabetes
- Updated: 26.06.2021
- Read reviews

Hernia Truss Supports
- Updated: 20.01.2021
- Read reviews

Leupold Compact Binoculars
- Updated: 06.02.2021
- Read reviews

Over The Door Towels
- Updated: 27.01.2021
- Read reviews