13 best sensor for smart homes

Product description

Emporia has developed the next generation of the Vue Energy Monitor. Committed to bringing the best value at the lowest price possible, the Vue provides everything you need to monitor your entire home's energy usage in real time. See how much electricity your home is using anywhere, anytime.

• INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors. INSPECT YOUR ELECTRICAL PANEL for compatibility. Panels with access only to busbars will need flexible sensors available from the emporiaenergy website. Includes DIY instructions, though a professional electrician is recommended.
• 24/7 ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. Light commercial 3 phase option available as a separate bundle.
• APPLIANCE MONITORING WITHOUT GUESSWORK: Comes with sixteen (16) 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc.
• LOWER YOUR ELECTRIC BILL: Gauge real-time spending and get actionable notifications to understand where you can save costs.
• REAL-TIME ENERGY DATA: Vue connects to 2.4GHz WiFi to monitor energy use with iPhone / Android app. Vue sensors provide 1-second data and are accurate from ±2%. The Vue is UL and CE Listed for your safety.

User questions & answers

Question:	Can this be set up to use and view on a desktop computer or does a person have to have a cellphone
Answer:	The app can show water usage down to 1 minute intervals. So, in essence, you can capture the flow rate (GPM) of your appliances. The data is near-real-time, as there may be up to a one minute delay. We have had several customers use our device to do water audits, where they determine the flow rates of all of their appliances. As you said, you just need to run them one at a time.
Question:	Does this work with a 240 line
Answer:	On your meter, we can measure a flow rate as low as 0.02230774 gal/min. On badger meters, we are extremely accurate. If your meter says that you have used 100 gallons, the Flume device will say the same.
Question:	Any monthly app fees
Answer:	The Flume water sensor is powered by 4 user-replaceable AA Lithium batteries. In ideal conditions, these batteries can last between 1.5 and 2 years. All of the following are ideal conditions for maximizing battery life: - Outdoor meter pits where there is a direct line of sight between the Flume water sensor and the bridge - A short distance between the water sensor and the bridge (i.e. less than 500 feet). The shorter the distance, the longer the battery life. - Outdoor meter pits with plastic or concrete lids - Basement installations However, in some environments, the battery life can be much shorter. All of the following will reduce battery life: - Outdoor meter pits with metal lids - Outdoor meter pits that frequently fill with water - A long distance between the water sensor and the bridge (i.e. more than 500 feet) - Obstacles between the water sensor and the bridge, such as walls that contain rebar and automobiles
Question:	Is there a subscription needed
Answer:	I live in Austin, TX and purchased my Flume Water Meter this year in July of 2019. It is near the end of November and my battery still shows to be between 60-100%. The app only has three bars to represent battery consumption. I’ve not had any issues with the heat here in Austin, TX.

Product features

Turning Power Into Knowledge

Emporia has developed the next generation of the Vue Energy Monitor. Committed to bringing the best value as affordable possible, the Vue provides everything you need to monitor your entire home's energy usage in real time. See how much electricity your home is using anywhere, anytime.

Monitor Individual Circuits without the Guesswork

Add individual 50A sensors to your Vue to monitor up to 16 individual circuits — providing accurate energy use for the appliances and equipment that is important to you. No guesswork. No trying to discern energy signals from background noise. Just simple, easy, and accurate insight into your home. 50A sensors are sold separately and also sold in bundles with the Vue.

Measure Solar Net Metering without Extra Hardware

Solar net metering is built right into the Emporia Vue. The simple Emporia iOS and Android app will show when and how much electricity you are consuming and when and how much excess energy you are producing back to the grid — giving you keen insight into the impact of your solar panels as they relate to your energy use.

Installs in the Electrical Circuit Panel of your Home

The Gen 2 Vue installs in your home's electrical panel using CT sensor clamps that go around your mains and the other circuits you wish to monitor. DIY instructions included, but a professional electrician is recommended. The Vue system is designed for field installation in a switch enclosure as per 312.8(B) of the 2017 NEC regarding Power Monitoring Equipment.

Do You have Metal Bus Bar Mains in Your Panel?

Our Flexible Current Sensor solution is now available on the EmporiaEnergy website. These current sensors are meant to replace the 200A main sensors that ship with Gen 2 Vues. They employ a bendable Rogowski coil with a 1.4” (36mm) opening that can fit around most bus bars or into tight spaces where a standard current sensors clamp cannot fit. Installing the Flexible Current Sensors is still dangerous, and Emporia highly recommends that installation be performed by a licensed electrician or other qualified professional.

Add Emporia Smart Plugs to Your Vue

Emporia Smart Plugs (sold separately) can be added to your Vue system to help you to not only monitor the energy of lighting and small appliances, but to also set timers, schedules, and turn them on and off from anywhere, any time with the Emporia app.

Product description

Meet the Google Nest Temperature Sensor. It communicates the temperature to compatible Google Nest thermostats, like the Nest Learning Thermostat (3rd gen) and the Nest Thermostat E. You can put different Nest sensors in different rooms, then use the Nest app to choose the exact temperature you want the room to be, along with a time of day. And it’s simple to install yourself – just hang it on the wall or place it on a shelf.

[1] The Nest Temperature Sensor requires a 3rd generation Google Nest Learning Thermostat or a Google Nest Thermostat E. Identify your thermostat at nest.com/whichthermostat.

[2] Remote control and mobile notifications require working internet and Wi-Fi.

• Works with compatible Nest thermostats [1]; the sensor tells the thermostat what the temperature is in the room where it’s placed and the thermostat uses that reading to control when the system turns on or off to keep that room the temperature you like
• Put different temperature sensors in different rooms, like the baby’s room or living room
• Control your Nest sensor in the Nest app; set a schedule and choose which room to prioritize when [2]
• Compatible with the Nest Learning Thermostat and the Nest Thermostat E [1]
• The Nest Temperature Sensor is easy to set up; just hang it on the wall or place it on a shelf
• The Nest sensor runs on batteries so it works in most homes; batteries can last up to 2 years
• Add up to 6 sensors for each compatible Nest thermostat in your home

User questions & answers

Question:	I am buying a nest e. do i really need to buy this sensor
Answer:	You don't need this sensor to operate a nest thermostat. The best has a temperature sensor built in. It will take the room temperature where the nest is installed and regulates the AC based on that room. Some folks have the need to control an additional space during certain times of the day. Most common would be a bedroom during night time. With the extra sensor you can set up the AC to bring the temperature of the bedroom to a certain temperature regardless what the temperature is in the room the nest thermostat is in. So it's a comfort feature. You can try the next by itself and if you find that you want to change temperature control to your bedroom you can add it later.
Question:	Hi my home has 5 zones do i need just one nest? or do i need one in each zone? would the sensors be good enough
Answer:	If you are going to replace your thermostat with Nest thermostat, a one for one replacement for each thermostat. Now, if you have just one thermostat and five zones, then it implies that you are monitoring temperature and providing feedback to the thermostat for each zone. To put it simple one nest thermostat, plus sensors will give you the hability to keep one selected room at a temeprature desired. Just select the sensor you want to set as controlling. For more than one thermostat you will need the above set up multiple times. The Nest application is one the most user friendly apps I have ever used.
Question:	How long does the battery lasts before it needs replacing
Answer:	2 years and still haven't had to change batteries.
Question:	Will this work with Nest Thermostat Gen 2 with the latest software
Answer:	Hi! Nest temperature sensor require an installed 3rd Generation Nest Learning Thermostat or Nest Thermostat E. Not compatible with Nest 1st Generation or Nest 2d Generation thermostats. Hope this helps.

Product features

Keep your home and family comfortable.

Most homes aren’t the same temperature in every room. Maybe the baby’s room gets too cold or the living room is too warm. Or maybe your thermostat is in a room where you don’t spend much time. The Nest Temperature Sensor helps make sure a certain room is just the temperature you want it to be.

How does it work?

Your sensor will tell your Nest thermostat the temperature in the room where it’s placed. Your thermostat will use that reading, rather than its own built-in sensors, to control when the system turns on or off. You can schedule it to use different sensors at different times of the day.

Compatibility.

It works with the Nest Learning Thermostat (3rd gen) and the Nest Thermostat E.[1]

Battery powered.

Wireless and runs on batteries, so it works in most homes. The battery can last up to two years.

Comfort from room to room.

Put temperature sensors in different rooms. And choose which room to prioritize when.

Simple setup.

Just hang it on the wall or set it on a shelf. Then forget it’s even there.

Control in the Nest app.[2]

Set a schedule for your sensors or learn more about temperature readings in your home.

Where should I install it?

In most homes, it’s best to install your sensor in a room where you spend a lot of time, like a bedroom or living room. Place it near chest height for the most accurate temperature measurement. And make sure it’s within 50 feet of your thermostat so they can communicate.

Product description

Smart Thermostat with Smart Room Sensor. Honeywell Home T9 WiFi Smart Thermostat, Smart Room Sensor Ready, Touchscreen Display, Alexa and Google Assist

• LIVE AND SLEEP SMARTER. Choose the temperature in a specific room, like the bedroom, to be exactly what you want it to be, to help get a better night’s sleep. Or let the Smart Room Sensors automatically detect which rooms people are in and focus comfort where it matters automatically.
• AMAZING SENSOR RANGE. The battery powered Smart Room Sensors utilize unique Honeywell Home technology to deliver an efficient signal up to 200 ft range. (Could be further depending on home construction)
• MULTI-ROOM FOCUS. Don’t be forced to choose one room over another, the T9 Smart Thermostat can handle multiple rooms to focus on (requires sensors).Voltage: 24v. Smart Room Sensor Dimensions-2.6 x 2.6 x 0.77 inches
• SAVE MONEY AND ENERGY. Adjust your thermostat from anywhere with your mobile device, or let your home automatically react to your schedule with Auto Home/Away Scheduling. Save even more with possible inclusion in energy saving schemes from your utility provider. (Subject to availability in area)
• SMART RESPONSE AND ALERTS. Intelligently learns your home’s heating and cooling patterns to deliver the right temperature at the right time, and sending you filter and temperature alerts.
• DO IT YOURSELF SIMPLE INSTALL. With guided installation setup couldn’t be simpler. The included power adapter is an easy-to-install, low-voltage alternative to a C-wire, so the thermostat is compatible with most homes.

User questions & answers

Question:	Does it have circulate fan mode
Answer:	Yes, I have 20 yo boiler system and 2 wires is all you need.
Question:	Can the remote sensor be the primary temperature setting? I want the room that the remote sensor is in to be the desired temperature (no averaging
Answer:	Yes it's a green display with black txt, just as the picture shows
Question:	If i don’t care about using an app or alexa, etc does the thermostat need wi-fi to operate with a sensor or do they connect directly
Answer:	http://yourhome.honeywell.com/en/products/thermostat/5-2-day-programmable-thermostat-rth2300b1012 is the location. Scroll down the page and look under resources.
Question:	How can this device supply a different temperature in one room versus another? The heating system doesn't send heat to one room and not another
Answer:	Updated link to the product manual:https://customer.honeywell.com/resources/techlit/TechLitDocuments/69-0000s/69-2448EF.pdfAs noted elsewhere, in a 2 wire case it will always be Red and White

Product features

Welcome to 'Just Right'

Sense the temperatures in the places that matter most with the T9 Smart Thermostat. Focus on the rooms you choose by setting a schedule — or let the sensors respond to your lifestyle, helping save energy when you leave and preparing that ideal temp for your return.

Whole Home Coverage

Place Smart Room Sensors around your home to see each room’s temp and humidity. Focus on specific rooms you choose, or let the sensors focus on rooms people are in.

Sensors have a stronger signal reaching up to 200 feet, spreading further across the whole home to increasing quality of signal and data presented to the T9 thermostat.

Help Everyone Sleep Comfortably

"Alexa, check the temperature of the bedroom." Focus your T9 Smart Thermostat on specific rooms, such as bedrooms, so everyone can get a cozy night's sleep.

Requires Smart Room Sensor per monitored area.

Auto Home and Away Mode

With the Honeywell Home app, using geofencing the T9 knows when you're coming and going, so no matter your schedule, you can always come home to comfort and save energy when you're away.

Easy Install

Feed your wires into the lettered ports of the wall plate, close the plate, and snap your T9 onto the wall. Then the T9 will self-configure, guiding you through a simple setup.

Monthly Energy Reports

Track your heating and cooling trends and get tips on reducing energy use so that you can help save on your energy bills.

Your Day Is in Your Control

Control the T9 Smart Thermostat however you want, using the Honeywell Home app or through Amazon Alexa, Google Assistant, Microsoft Cortana, Samsung SmartThings, and more.

"Alexa, set the living room to 72 degrees until 7:15 PM."

"Alexa, raise the temperature by 2 degrees."

Honeywell Home App

Manage your Honeywell Home devices in one easy-to-use app, making it simple to control home comfort, monitor usage and more — from anywhere.

Worry less — get alerts if temperatures rise above or fall below your threshold as well as reminders to change your air filter. Plus, your thermostat automatically switches to your preferred away temperature when you leave.

People Detection

Smart Room Sensors can automatically focus on occupied rooms. Advanced motion detection knows the difference between someone passing through a room or spending time there.

Multi-Room Focus

Focus on multiple rooms for comfort where it matters most. Don’t guess at the temperature in the bedroom from the hallway. Get the temp you want, where you want it—to sleep, work, focus, or unwind.

Product description

The Philips Hue Outdoor Motion Sensor automatically turns on the Philips Hue Smart Lights you want, both outdoor and indoor.The sensor detects variations in infrared radiation in its environment, allowing it to detect human movement and automatically turn on the lights (sensor motion sensitivity can be adjusted in the app). By connecting the motion sensor to your Hue hub via the Philips Hue app, you can choose which of your Philips Hue lights go on, both inside and outside your house. Also choose the scene or light setting that should be triggered. The integrated dusk-to-dawn sensor ensures your lights only switch on when it is actually dark outside helping you to conserve energy. This Philips Hue outdoor sensor is specially designed for use in outdoor environments and has undergone rigorous tests to ensure its performance. Certified by UL, the product will withstand heavy rainfall and other weather conditions.​ 160 degree horizontal/80 degree verticle view angle with 39 ft x 8 ft detection radius. Optimized for far range and close proximity (antering and leaving home). Able to fix the motion sensor on both a flat wall and corner.

• ENHANCE YOUR SMART HOME EXPERIENCE: The Philips Hue Outdoor Motion Sensor detects outdoor motion and can trigger both Philips Hue Indoor and Outdoor lights. Set your Hue sensor to welcome you or guests home with lights, or detect intruders or potential package thieves with pre-set light scenes, Philips Hue Hub and Hue Smart lights required and sold separately, Works with Apple HomeKit
• MAXIMUM SECURITY: Scare away potential package thieves or intruders, Thanks to the large view angle and detection range the outdoor sensor will spot any movement near your smart home, It can directly turn on your outdoor lights to expose intruders while turning on indoor Hue smart bulbs so it looks like you're home, even when you're not
• EXTREME RESISTENCE: Resistant to all weather conditions, this Philips Hue outdoor sensor is designed for use in outdoor environments and has undergone rigorous tests to ensure its performance. Certified by UL, the product will withstand heavy rainfall and other weather conditions,
• EASY INSTALLATION: Installed in a matter of minutes, the outdoor motion sensor is easy to mount and is fully wireless. You don’t need an electrician to have it installed. Just unpack the sensor, set it up through the Philips Hue app and install it wherever you like. Configuring the outdoor sensor and setting the daylight and motion sensitivity is also done via the Philips Hue app
• LIMITLESS POSSIBILITIES: Place the Philips Hue Outdoor Motion Sensor where you want. The kit comes equipped with different mounting components. You can mount it on a flat wall, on the inner or outer corner of a wall or post, or on a pole or rain pipe. It's perfect for front yard lighting, deck lighting, porch lighting, around the door, garage or any place around your smart home where it matters. One lens to see it all: The lens of the outdoor sensor is custom designed to detect movement directly below the sensor – for example when you step out of the door or are at a longer distance it detects you. When closely examining the lens you can see how the lens pattern changes to detect movement at close range and the upper part at long range
• UNLOCK HUE'S FULL POTENTIAL: For the full set of smart light features, add a Hue Hub (sold separately) to your smart lights to experience the full set of Philips Hue features. With a Hue Hub, you can control up to 50 smart lights throughout your home (even outdoor!). Create timers and routines to automate your entire smart home lighting setup; use your lights to wake up and go to sleep; or make it look like you're home when you're on vacation using presence mimicking features. Control your lights while away from home or add accessories such as motion sensors and smart switches to further enhance your experience. The possibilities are yours to unlock when you add the Hue Hub (sold separately)

User questions & answers

Question:	Do you have hard wired version? Normally the sensor is mounted somewhere out of reach. Why would anyone wants to change battery periodically
Answer:	No one WANTS to change a battery periodically but if there is no available outlet, it’s better than nothing. And every couple of years is no big deal. (Plus it looks much better if there is no electrical cord running down the side of your house.)
Question:	Can I use this to trigger other smart outlets
Answer:	Short answer: Yes Long answer: It depends. I don’t know how home automation works with android, but Phillips Hue is Apple HomeKit compatible. The sensor shows up as 3 sensors in the Apple Home app, motion sensor, light/lux sensor, and temperature sensor. You can create automation rules in Apple Home that can control any HomeKit compatible outlet. I don’t know if Phillips Hue has released any smart outlets (pretty sure they just do lighting), but if so then you could probably create a routine for it in the Hue app. Note: If you’re new to HomeKit, you should be aware that Apple HomeKit automation only works when you have an Apple device acting as a home automation hub. This can either be an AppleTV or iPad (that stays at home). If all you have is an iPhone, it either won’t work at all, or if it does it will only work when your iPhone is connected to your home WiFi.
Question:	How long will the battery last
Answer:	About 2-3 years
Question:	Any way to keep the floodlights on (at a dim level) and they get brighter when detecting motion. AND off altogether if it's daylight
Answer:	Glad to see there's finally a work around for this. I previously had an app (I can't remember the name) that allowed you to create logic linked to any smart platform... and also use things like the Nest Doorbell... so I had it set to: Hue came on sunset at 10% dim. If Nest detects person, set Hue outdoor lights to 100% Brightness for 30sec., then activate scene 10% dim. It worked great, but the people who developed that app discontinued it. It worked for a while afterward too but then one day just stopped. I'm so glad to see I can do this again!!! (since you can buy "dumb" lights that do this on their own with 2 level dusk dawn motion sensors)

Product description

Your lights can do more with the Sengled Smart Window & Door Sensor. Install it on any door jamb or window frame and automate your lights based on if the door or window is open or shut. It's simple to have your lights come on as soon as the front door opens.

• Simple Set Up: Pair the sensor directly to the Sengled Smart Hub using the Sengled Home app (iOS/Android). A compatible hub is required for use
• Simple Installation: Use the in app guide to activate your sensor. Then, peel the backing off the adhesive and stick on any door jamb or window frame
• Check In From Anywhere: See the status of your window or door by checking the Sengled Home app (iOS/Android) when connected to a Sengled Smart Hub
• Automate Your Home: Have your entryway lights turn on when you open the front door automatically. Use the open/close status in the app to trigger other Sengled smart devices, including Sengled Smart LEDs
• Keep An Eye Out: Know when your door or window has been opened by checking the timeline in the Sengled Home app

User questions & answers

Question:	Will the door sensor work with a samsung smartthings hub
Answer:	The sensor does “work” with the SmartThings hub but the sensors don’t stay connected for more than a few hours in my experience.
Question:	Does plug integrate into element home app or do you have to use a different app
Answer:	When I first used Sengled products it was their Element LED bulbs and the Element Home app was recommended. However when I subsequently purchased the Sengled Smart Plug, during installation it indicated I needed the Sengled Home app to continue. My initial thought was "now I need 2 Sengled apps for all this?" But that wasn't the case. The Sengled Home app recognized that the Element app was installed and automatically imported all my LED bulbs. As such, at the end of the Smart Plug install, the Element app was no longer needed and the Sengled Home app now controls both Sengled LED smart bulbs and Sengled Smart Plugs.
Question:	What is the power rating on this device
Answer:	The power rating (wattage) is 1800W.
Question:	Does this plug support Zigbee 3.0 standards
Answer:	Yes, the Sengled Smart Plug supports Zigbee 3.0 standards.

Product features

Sengled Smart Door & Window Sensor

Your lights can do more with the Sengled Smart Window & Door Sensor. Install it on any door jamb or window frame and automate your lights based on if the door or window is open or shut. It's simple to have your lights come on as soon as the front door opens. View activity set automation, and more with the Sengled Home app (iOS/Android.)

Voice Control

Sengled smart sensor is compatible with Amazon Alexa and Google Assistant; Simply give a voice command to control your door.

24 Hour Monitor

Smart sensor door and window alarm sensor is designed to monitor the open or close status of any entrance; An alert notification will automatically send to you in seconds once the sensor triggered

Check In From Anywhere

See the status of your window or door by checking the Sengled Home app (iOS/Android) when connected to a Sengled Smart Hub.

Automate Your Home

Have your entryway lights turn on when you open the front door automatically. Use the open/close status in the app to trigger other Sengled smart devices, including Sengled Smart LEDs.

Product description

Smart Room Sensor 2 pack.

• Compatible with Honeywell Home T9 and T10 pro smart thermostats
• Smart room sensors have a range up to 200 feet and a 1-year battery life; install them practically anywhere; range can vary depending on your home's construction, wireless interference, and other factors; battery life may vary by use
• Smart home room sensors can know when a room becomes occupied and automatically adjust the temperature
• With smart home sensors, your thermostat can know temperature in any room - like your bedroom, to help make the room more comfortable for a great night's sleep

User questions & answers

Question:	How would one use this in a single zone house (single DX system) without dampers? One of my room is very cool while another across the house suffers
Answer:	Hi Jupiter, with the T9/T10 thermostat you can select which rooms/smart room sensors you want your thermostat to focus on (which rooms it should measure). For example, during nap time, you may want the nursery room prioritized so the baby sleeps at the ideal temperature. You can even select multiple rooms to be prioritized, like all 3 of the bedrooms, and the thermostat will heat or cool the home based on an average of those rooms. If you have further questions you can contact our tech support team at 1-800-633-3991 Monday - Friday 9 am to 8 pm, Saturday - Sunday 9 am to 5 pm CST. - Maria
Question:	Does this work on redlink technology
Answer:	Thank you for contacting us with this question. This sensor does have RedLink 2.0 technology.
Question:	Assuming I have a T9 installed, can the sensors be used to trigger events on other devices
Answer:	The sensor talks back to the T9 to tell it a room temperature and/or if there is motion in the room. I don't know what you mean by triggering events on other devices, but at a base level, it doesn't correspond to any other devices.
Question:	Can this control hydronic zone valves? So say for example the upstairs is much hotter than downstairs. The valves upstairs will be shutoff
Answer:	Hello Adam. This sensor works with the Honeywell Home T9 and T10 pro smart thermostats, not compatible with zoning systems. Feel free to contact us at 1-800-633-3991 if additional questions or concerns arise. We'll be happy to help. Thank you.

Product features

Smart Sensors, Smart Living

Place Smart Room Sensors where you want to see each room's temperature and humidity. Use the multi-room display on the thermostat's touchscreen or in the app to easily focus on rooms either based on their occupancy or according to a specific schedule you choose.

When focused on multiple rooms, the T9 will work towards creating an average temperature, balancing the needs across the whole home.

Purchase the T9 bundled with a sensor, and expand the system by adding up to 20 additional sensors.

Help Everyone Sleep Comfortably

Focus the temperature on multiple rooms for comfort where it matters most. Don’t guess at the right temperature in the hallway to make your bedroom comfortable enough to sleep. Get the comfort you want, where you want it – to sleep, work, focus, or unwind.

People Detection

With Smart Room Sensors, the T9 can know which rooms are in use so it can automatically focus on them. Intelligent motion detection algorithms help it tell the difference between someone passing through or spending time in a room, so your ideal comfort can efficiently follow you and your family from room to room over the course of your day. So, if the kids are doing homework or playing while you get dinner ready, everyone will be cozy - and when it’s time to gather, it can keep up.

Product description

Our Wifi detector can record door and window Openning/Closing status in App.user can check these data anytime and anywhere through Tuya APP. Never worry about missing any important moment .

If you install more than one door sensor in different places. All the statuses of doors and windows will be displayed simultaneously within the app ,so that you can easily know what you want at a glance.

Specification:

Battery: LR03-1.5V/AAA*2 (Alkaline battery)

Battery Life: 6000 times trigger

Standby Current: 8uA

Alarm Current:70mA～120mA

Wireless Type: 2.4GHz

Wireless Standard: IEEE 802.11b/g/n

Working Temperature: 0℃～40℃ (32℉ ～104℉ )

Working Humidity: 20%～85% RH

Storage Temperature: 0℃～60℃ (32℉ ～140℉ )

Storage Humidity: 0%～90% RH

App: Tuya smart or Smart life

Supports Android 4.4 and iOS 8.0 or newer

Material: ABS

Size: (Main body): 2.83 IN x 0.85 IN x 1.18 IN

(Small body): 1.79 IN x 0.61 IN x 0.55 IN

Package Inhalt:

1 x Wireless Door / Window Sensor (AAA Batteries Not Included)

1 x User Manual (English)

• Receive Real-time Alarms Remotely:when door/window is opened or closed, the sensor will push instant notification to your smartphone immediately. so you don't have to worry about your baby going out of house without notice, will easily know when your aged parents leave or arrive home and even can be clear when someone enters your home,shop,office ,etc.
• Compatible with Google Play,Andriod and Ios System:No hub required and No fees charge. Convenient for you to detect the status of your doors, windows, cabinets, drawers or anywhere you want to notified when it is opened or closed.So you can travel or go to work or go to schoon or go shopping worry-free.
• Alert message push: Protect your home with open / closed door detection. When the door / window is triggered, you will receive an alarm signal from your phone. Home Security Alarm make House more safety.
• Easy Installation：No Need to use complicated tools when installation,just use 3M glue to install,firm and durable.The two arrows are opposite,the distance between the two compopents should be as close as possible,and the closest distance should not affect the opening/clsoing of the door or window.
• Low Power warning: The sensor door need with TWO AA Batteries(not include).When the battery level is low, it will automatically push messages throuch APP to remind you to change battery, never worry about running out of battery.

User questions & answers

Question:	Does this work with smart light bulbs? If so, which ones? (Is it agnostic
Answer:	These things don’t work at all
Question:	Does this work with the plusminus app? looking for a device that i can automate that when device is triggered, lights will turn on
Answer:	I use Alexa to do any automation
Question:	Is it compatible with google home
Answer:	No
Question:	Is there a time delay? Say a door is left open for over 60 seconds
Answer:	Yes about 30 to 60 seconds

Product description

Cautions: All the Aqara products sold by Aqara Direct are the official models of US version. Products purchased from unauthorized sellers are NOT eligible for and replacement by Aqara.

• NOTES: Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. One Aqara Hub can connect up to 32 Aqara devices.
• REMOTE MONITORING: When the room temperature reaches above or below a certain threshold, the Aqara Temperature and Humidity Sensor can send a push alert to your phone or trigger the Aqara Hub night light.
• HOME AUTOMATION: The Aqara Temperature and Humidity Sensor can control other connected devices such as Aqara Smart Plug to ensure that your fan or humidifier maintains a constant level of comfort for you and your family.
• ACCURATE MEASUREMENT: Utilizes high-quality sensor from the industry-leading manufacturer, Sensirion.
• BUILT-IN AIR PRESSURE SENSOR: Monitors the ambient air pressure in the room.

User questions & answers

Question:	Can an apple tv be used as a hub instead of an aqara hub? if not, this is disappointing and i'll keep looking for a better cost-effective solution
Answer:	Our sensors need to be paired with the Aqara Hub. Once paired, you can then use them in Homekit.
Question:	Can these be used in an enclosure with a misting system? Or would water seep in
Answer:	It would not be recommended to use it in an enclosure with a misting system. The Aqara Temperature and Humidity Sensor is an indoor device that works at - 20 ~ 60 ℃ and 0-100% of relative humidity with no condensation. Do not install the sensor in the refrigerator, kitchen or bathroom. Do not expose the sensor to rain and vapor.
Question:	Could I use this in a refrigerator
Answer:	The Aqara Temperature and Humidity Sensor is suitable for indoor use. We do not recommend using the sensor in the refrigerator. Normal operating temperature:-20 to 50°C (-4 to122°F); humidity: 0~100%, non-condensing environment. Do not expose the sensor to rain or vapor. Do not install the sensor in the refrigerator, kitchen or bathroom.
Question:	Does it work in smart life app
Answer:	Sorry, it does not work with the Smart Life app. We make no claims of compatibility with any eco-systems other than Aqara Home, Apple Homekit, Google Home, Alexa, and Mi Home.

Product features

Aqara Temperature and Humidity Sensor

Whenever the temperature reaches above or below a certain threshold, the sensor will send an alert to your phone and automatically turn on/off the humidifier or fan via the Aqara Smart Plug.

Communications between Aqara Hub and Aqara devices can reach up to 20 m (65 feet) under normal conditions. It depending on terrain and building structure. Aqara Smart Plug and Aqara Smart Wall Switch(With Neutral) can also be used as a signal repeater to extend signal coverage.

Easy Setup and Maintenance

Most Aqara devices require no wiring and screws. With the Aqara App and its easy-to-follow instructions, you can set up your smart home in no time. Aqara devices are also made to consume very little energy, and most Aqara products can last over 2 years without changing batteries.

Peace of Mind

Aqara can always provide you with the comfort of knowing what’s happening at home while you’re away. With a wide range of sensors, Aqara can trigger the alarm sound or send you an alert notification when unexpected entry, movement, temperature change, or water leak is detected.

Remote Control and Automation

Aqara provides you with countless ways to control your smart home, whether it be through your phone, wireless switches, or voice commands via 3rd party voice assistants. Set different automations and scenes to control your electronic devices based on the time of day or your personal preference. Your house will always be at your command no matter where you are.

Compatible with Most Voice Assistants

Aqara Hub is designed as high-compatibility smart home control center. Aqara devices into Apple HomeKit and Xiaomi Mi Home to work with other compatible devices for alarm systems, home automation, and voice commands. For example, you can set an “Away Mode” and activate the scene using your voice.

Download Aqara Home app

Can the Aqara Temperature and Humidity Sensor be connected to the mobile phone directly?

The Aqara Temperature and Humidity Sensor cannot be connected to the mobile phone directly.

An Aqara Hub is required, please connect the Aqara Hub with the mobile phone, and then connect the Aqara Temperature and Humidity Sensor to the hub.

What if I could not connect the Aqara Temperature and Humidity Sensor to the app?

1. Check to see if the hub's firmware version is up to date.

2. Check if the hub is already in the pairing mode.

3. Check if the sensor is reset successfully, and the LED indicator is blinking as expected.

4. Keep the sensor as close as possible to the hub and keep trying.

5. Try with another child device to see if there is something wrong with the sensor itself.

6. Try with another hub and see if there is something wrong with the previous hub.

7. Please be aware that we can add no more than 32 child devices to a hub at the same time.

Product description

Experience enhanced comfort, increased savings, and advanced control. SmartThermostat with voice control is the award-winning thermostat that learns and adapts to your routine. Included SmartSensor keeps you comfortable where you are through occupancy detection.

• Place SmartSensor in the most important room, like your bedroom, child’s room, or office to keep it the perfect temperature
• Smart Home & Away detects your presence and automatically adjusts the temperature for comfort when you’re home and reduced energy use when you’re away
• Time of Use cools or heats your home during times when energy is less expensive without impacting comfort
• Named “Best Overall Smart Thermostat” by Tom’s Guide
• Take control of your temperature from anywhere with the ecobee app
• Integrates seamlessly with your preferred smart home system
• Your hub for ecobee Haven, a home monitoring subscription that connects and enhances your ecobee devices

User questions & answers

Question:	How to wire up voice thermostat with only 2 wires ,r and w
Answer:	In most cases, Nest thermostats can get enough power from your system’s heating and cooling wires. But in a small number of situations you may need to connect a common or C wire to deliver enough consistent power to your thermostat when your heating and cooling wires are not able to deliver the needed power for your Nest thermostat. Battery drain issues normally happen when the power from your heating and cooling system goes out. The 2 AAA alkaline batteries are used as a backup, or to supplement if your system can’t deliver enough power.
Question:	I don't have a 'C' wire... how difficult is to adapt the Ecobee using the included cable and how is it done
Answer:	No
Question:	If you have an echo (alexa) in the room already, is there a way to turn the alexa on the thermostat “off”? or turn off the microphone/listening
Answer:	I found an interactive video on my utility’s website (Commonwealth Edison) that ran through the wiring questions. It will tell you if your system is compatible with Nest thermostats.
Question:	Can the Mic and Alexa be turned off
Answer:	No. Sensors are not compatible.

Product features

Comfort that stays with you.

Included SmartSensor keeps you comfortable where you are with occupancy detection. Place in your most important room to keep the temperature perfect.

Experience comfort.

Experience comfort when you’re home and reduce energy use when you’re away with Smart Home & Away.

Best Overall Smart Thermostat

Named "Best Overall Smart Thermostat" by Tom’s Guide.

ecobee app

See and control temperature from anywhere with the ecobee app.

Integrations

Works on its own and with all leading smart home systems.

Experience enhanced comfort

Experience enhanced comfort and energy savings that are unique to your home with eco+ smart features that learn and adapt.

Product description

Product Requirements:

The smartphone or tablet able to run iOS 9 or higher; Android 4.4 or higher.



Features:

Real-time Status - Monitor the real-time state of door via YoLink App.

Open Remind - Remind you while the door is open for a set up time.

Battery Status - Update battery level and send low battery alert.

YoLink Control - Trigger an action of certain YoLink devices without internet.

Automation - Set up rules for “If this then that” function.



Specifications:

YoLink Hub

Input: 5V DC

Maximum Current: 1A

Working Temperature: -20°C~50°C (-4°F~104°F)

Humidity: 0~90% non-condensing



YoLink Door Sensor

Button: Set Button

Voltage: 3V DC (2* AAA battery)

Trigger Distance: 18-25mm

Environment:

Operating Temperature: 0°C~40°C (32°F~104°F)

Storage Temperature: -20°C~70°C (-4°F ~158°F)

Operating Humidity: 10%~90% (non-condensing)

Storage Humidity: 5%~90% (non-condensing)



Package Content:

1 x YoLink Hub

4 x YoLink Door Sensor

• World's Longest Wireless Range: Powered by LoRa technology, the long-range yet low-power system offers the industry’s longest receiving range in the market (1/4 mile). Our long-range coverage enables its use in areas challenging for most residential Wi-Fi systems, such as basements, outdoor porch/patio areas, sheds, free-standing garages, even remote outbuildings on your property.
• Early-Warning Notifications - Receive real-time early-warning notifications in the form of smartphone banner alerts, limited SMS/text messages, and emails, each optional and configured per your needs; Please note: YoLink Door Sensor does not alarm or chime, it only sends notifications; For an audible alarm, consider our Siren Alarm
• Low-Power Means Longer Battery Life: Because of the low power consumption, device batteries may last 5 years or more (depending on application and device usage/activity), on standard AAA Alkaline batteries (lithium batteries not required)!
• From Simple to Super-Smart: After setting up your notification preferences, keep it simple and let the YoLink system do the rest and monitor your home and property for you. Or, utilize available advanced automation features, including 3rd-party integration with Alexa and IFTTT, to interact with other YoLink and 3rd-party smart devices. Limited only by your imagination!
• No Tricky Wi-Fi Requirements: While many smart devices use and depend on your Wi-Fi network, YoLink devices utilize a proprietary radio frequency spread spectrum technology known as LoRa (Long-Range). With YoLink, you no longer have to worry about your devices consuming your Wi-Fi bandwidth. (YoLink Hub requires a 2.4 GHz Wi-Fi connection or a wired connection to your network equipment (patch cord included).

Product features

YoLink Smart Window & Door Sensor

• Works with Alexa - Receive voice announcements of changes detected by sensors in your home
• Works with IFTTT - Trigger Customer Automations Using IFTTT
• Real-time Status - Monitor the real-time status of the sensor via YoLink App
• Open Remind - Remind you while the door keeps open for set-up time
• Battery Status – Receive low-battery alerts before batteries need to be replaced
• YoLink Control - Trigger an action by select YoLink devices without reliance on the internet
• Automation - Easily setup scheduled and automatic actions and responses with the YoLink App as well as with 3rd-party integration platforms such as Alexa and IFTTT

Independent System

“YoLink” is a proprietary wireless technology provided by YoSmart. which is based on the Semtech's LoRa wireless technology combined with the YoSmart smart home/building protocol, to provide the most advanced smart home/building devices solution.

Compared to WIFI, Bluetooth, ZigBee, Z-Wave, and other smart home protocols, it has the advantages of low-power consumption, long-distance coverage (wall penetration), and anti-interference.

It is the first smart building/home protocol that can be very easily setup and is a very low cost but creates a reliable, robust and more secure IoT network.

Whole House Solution

Build "IF THIS THEN THAT" rules between YoLink Door Sensor and YoLink devices (sold separately) , making life convenient and secure.

Via YoLink, you can set smart scenes, automation and YoLink Control between devices and devices, sharing devices with family members and making your house smart.

Let's start your own whole house smart home system with YoLink.

No Internet Control

Unique YoLink Control - Trigger an action of certain YoLink devices without the internet.

Turn on/off the light even without the internet.

Note: YoLink In-wall Switch sold separately!

5X Long Lasting

Powered by 2*AAA Alkaline batteries, YoLink Door Sensor features with 5 years battery life compared to 1 year of other top brands.

Step 1, Download App

1, Download YoLink App from Apple store or Google play

2, Create Account and Login

Requirement:

Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher

Step 2, Add Device

Scan the QR Code on YoLink Hub and Door Sensors to add into YoLink App.

You can customize their name, set their room, and add to/remove from “Favorite”.

Step 3, Connect to Inernet

• Power up the Hub using the supplied power adapter, connect to your Wi-Fi network (or directly to your router, using the included patch cord), and your YoLink Hub will connect to the App.
• Press "Set" button on Door Sensor once to connect it to YoLink Hub and the Cloud

Step 4, Installation

1. Dry clean the installation area
2. Remove the protective layer of the double-side tape
3. stick the sensor and the magnet to desired position; Press it for 5-10 seconds to stick tightly

Note: please keep the default distance between sensor and magnet within 18mm when closed; please align the half circle on sensor with the half circle on magnet

Product description

Honeywell THX321WFS2001W T10 Pro Smart Thermostat with RedLINK, White

• Country of Origin: UNITED STATES
• The Package Length of the product is 7.11 inches
• The Package Width of the product is 14.22 inches
• The Package Height of the product is 15.49 inches

User questions & answers

Question:	Will the t10 control ventilation and also use over cooling to control dehumidification
Answer:	Absolutely you can overcool to (try to) control humidity. Google Resideo document 33-00462 for instructions
Question:	Will the T10 thermostat auto change from heating to cooling
Answer:	Yes it does.
Question:	Will this run off of two wires only (red & white)or do you have to have a C wire
Answer:	It need a C wire to keep it powered all the time. A two wired connection only closes 1 set of contacts to turn the furnace on when heat is needed. There are some work arounds where the two wires provide both control and full time power to the T-Stat but they probably aren't universal and may not be satisfactory.
Question:	how is this controlling room to room temperatures
Answer:	You can set it to prioritize a specific sensor or take an average of a group of sensors. I have 2 of these: 1 controls the living spaces for heat and the whole house A/C with 2 remote sensors. The second controls heat for 3 bedrooms with 2 remote sensors. The first I have set to average out the temps for the living room/kitchen/dining room. The second is set to prioritize the middle bedroom. Mine is configured for boiler/baseboard heat. You just have to play around with it to see what works best. It was certainly cheaper than re-zoning the whole house. A side note: if you have separate heating/cooling, as I do, power/neutral has to come from the A/C transformer. Just a weird HVAC thing, took me forever to figure it out... Something I wish the unit could do: I wish you could program remote sensors to multiple thermostats so that I can better average out/prioritize the A/C. I have the T9 variant so maybe that is possible on the T10 Pro...

• MONITOR LEAKS & TRACK WATER USAGE: StreamLabs smart home water monitor detects water leaks and tracks water usage using ultrasonic technology. It works by sending sound waves to your main water line & records the time delay to measure water flow.
• GET REAL-TIME ALERTS FROM THE APP: Using the free standard subscription through the StreamLabs app, you can set up real-time alerts on your smart phone. Enhanced subscription available for extended alert history, historical water usage & more.
• INSTALL IN 5 MINUTES: No pipe cutting or tools required. Simply attach the Monitor with the provided zip ties & plug in to a power source. Compatible with ¾ in. and 1 in. copper, PEX and CPVC pipes. Built-in Wi-Fi. Must be installed inside the home or in a crawlspace, garage, shed or weatherproof NEMA enclosure away from UV exposure.
• PROTECT THE ENTIRE HOME: Everyday usage, leaky pipes, appliance failures, freezing conditions and running toilets. One monitor protects your entire home.
• SMART HOME COMPATIBLE: App works with iOS 9.0 or later (iPhone/iPad) and Android 6.0 or later (phone/tablet). Compatible with Alexa or Google Assistant.

User questions & answers

Question:	What if i’d like to use more than 2 units? how can i add more, if i have multiple properties to manage
Answer:	StreamLabs finally put out an update to allow the app to add/monitor more than 2 devices up to a maximum of 5. However, they now charge $5.99 a month rent to utilize more than 2 monitors for life. You buy the device for $199 and then pay them rent each month to use it forever. (assuming you wish to add a 3rd, 4th or 5th unit to the account as in multiple properties to monitor). Sad as this is a great product and instead of urging customer to buy more, they penalize them and incentivize the customer to NOT buy additional units.
Question:	How small of a leak can it detect? Can it detect a dripping faucet
Answer:	The Monitor can detect flows as low as 0.25gpm on Copper-M, CPVC, and PEX pipes. The lowest it can detect on Copper-L is 0.5gpm. Typically a dripping faucet is too low of a flow rate for the Monitor to detect.
Question:	Is the company working on making the historical usage data more robust? Making it so an owner can see the usage over a period of months or even a year
Answer:	Nope! I spoke to them couple of times about that,trying to convince them how important that is, Unfortunately no fruit was produced..
Question:	Can’t seem to find what power source is required. Battery operated or does it require an outlet
Answer:	It uses an outlet. It is not battery operated.

Product features

StreamLabs Water Monitor Leak Detector

Being water savvy is easier than ever. The StreamLabs water monitor keeps an eye on what’s happening with the plumbing behind your walls and alerts you in real time when water problems arise – before they turn into disasters. With StreamLabs Smart Alerts, the monitor automatically detects your home's water usage patterns so you don't have to manually configure the device. With real-time insights, you receive instant notice of “abnormal” water use, along with comparative & historical data

Monitor

StreamLabs uses patented ultrasonic technology with real-time leak alerts for the most advanced leak detection.

Detect

StreamLabs sends sound waves into your main water line, recording the time delay to measure water flow.

Alert

Customize alerts to fit your water habits or use "Smart Alerts" to detect abnormal water flow automatically.

Integrate

Integrates seamlessly with Amazon Alexa or Google Assistant.

Leaky Pipes

Appliance Failure

Freezing Conditions

Running Toilet

Easy Installation

• Check the Wi-Fi strength at the installation location using the StreamLabs app.
• Install the Monitor on your main water line before any branches to other appliances, securing with the provided zip ties. The device must be installed inside the home or in a waterproof, covered enclosure.
• The device must be installed within 10 feet of a power outlet, or you can purchase a separate 25- or 50-foot extension cord.
• StreamLabs products are not available for sale outside of the US and Canada at this time, and the StreamLabs App is not available for download outside of the US and Canada. We do not currently support installations in countries outside of the US or Canada and cannot ensure that the Monitor will work on other pipes/systems.

• Turns your dumb dryer into a Smart dryer instantly with no wires! Smart Home Laundry Sensor that works with Alexa! Saves You Time and Energy! – Get the status alerts of your clothes and dryer on your Smart Phone (iOS and Android)
• SmartDry sends Alerts when your Dryer has stopped, Clothes are Dry, Delicates are getting too hot. Lets you check in on your clothes status via the App or Alexa anytime, anywhere.
• Wireless and super easy to setup with the FREE SmartDry App and Alexa Skill (iOS and Android).
• Works with ANY electric or gas clothes dryer. Specifically designed and rigorously tested for high temperature harsh environments. Great addition for Alexa and any laundry room to complete your smart home.
• Includes everything you need to start getting SmartDry alerts today. Easy to use Set and Forget Alerts. SmartDry comes with a one year worry free warranty.

User questions & answers

Question:	Google assistant support
Answer:	As of about Jan. 26, 2021 there is now Google Assistant support (with Google Nest/Mini Home Speaker support). I tested it, and it works. Don't try to add device with Assistant app. Ask Google Home to "talk to SmartDry" after setting up smart speaker support in the SmartDry app.
Question:	seller. any chance of making of one these with zwave built in? this would allow for audible chimes or alerts with a zwave speaker which i have
Answer:	Seller, why not just make a zwave version, and eliminate the need for a receiver outside the dryer to make up for cost? You could even use zigbee, which would be closer to the current frequency, doesn't need the z-wave license, AND you could connect directly to echo plus, echo 4th gen, show 8 etc. without the need for users to be into other systems. There is s market for devices like this, even if it raises the price.
Question:	Seller, what temperatures are your batteries rated to? I'm nervous about putting a battery in my dryer
Answer:	Great question! We take design and safety very serious here at SmartDry. The batteries that are supplied with SmartDry are two high quality Panasonic batteries (one already installed and one extra). The battery is only at risk of damage or explosion if batteries are disposed in fire or heated above 212 F. Gas and electric clothes dryers typically operate at a max temperature of 155F, well below the rated max. SmartDry has a built-in safety feature that sends an alert to your smartphone if it sees temperatures exceeding 165F. Temperature spikes over 165F are an indication of clogged vents that can create hazardous conditions in your dryer. SmartDry alerts users so that they can be aware and act if needed well before it becomes a real problem. For more piece of mind, we have spent a lot of time selecting the right battery that delivers the best performance and the highest safety to our customers. We have done extensive temperature, moisture, and real-world testing without ever having a battery failure. We also continue to add hundreds of hours a day in a large installed base that now has accumulated many thousands of operational hours and again no failures. Every unit is also tested 100% with batteries installed through full real-world temperature and humidity cycles prior to shipping from our factory. So, no unit is ever assumed ok, they all get tested. We have also built into the patented design, extra physical protections around the battery compartment for extra protections. For the longest operational life and safety performance we only recommended replacing the battery with the type and model we supply. I hope this gives you the information you need to feel comfortable knowing SmartDry is safe and is watching out for your safety also! Many thanks, Team SmartDry
Question:	Does this product integrate with samsung smartthings? if not, are there plans to do so? contact me if i can help or provide more info
Answer:	We are very excited to announce we have started Beta support for Samsung Smart Things. If you would like to activate your SmartDry to run on Samsung Smart Things please contact [email protected] for further information. Many thanks, Team SmartDry

Product features

SmartDry converts any clothes dryer into a smart dryer. Start getting real time status alerts about your clothes and dryer on your Smartphone.

• Tired of finding forgotten clothes in a wrinkled pile in the dryer.
• Sick of running up and down the stairs checking to see if the dryer has stopped.
• Worried your delicate items are going to get shrunk.
• Want peace of mind your clothes dryer is operating safely.

SmartDry is the answer. SmartDry is a patented smart home sensor that instantly converts any dumb gas or electric clothes dryer into a smart dryer in minutes. No wires, no tools, and a super easy step by step app guided installation. SmartDry provides smart alerts and instant energy savings at a fraction the cost of a new dryer. Upgrade your old dryer today to get all the convenience of a modern dryer now!

Start saving money right away by using the SmartDry alerts and status updates. Our customers are saving on average 15 minutes per load, which is translating into huge energy savings and money in your pocket each week!

SmartDry also adds a new layer of security and safety to your old dryer by constantly monitoring for hazardous conditions caused by clogged vents and it will alert you when issues arise.

Start doing laundry smarter with SmartDry!

Smart alerts save you time, energy and money right away!

SmartDry patented smart sensor will send you alerts when:

• Clothes are dry (user select-able levels)
• When the dryer is running or stopped
• When dedicates are getting too hot
• If dangerous conditions exist in the dryer
• When the battery needs to be replaced

Provides extra layer of protection in your laundry room!

SmartDry also provides peace of mind!

It constantly monitors your dryer for hazardous conditions while its running. SmartDry will send an alert when high temperatures inside the dryer need your attention. These are usually the sign of clogged vents that can lead to dangerous dryer fires.

Super easy installation!

Quick and easy installation.

• No tools needed.
• Completely wireless
• The smart sensor instantly snaps into place using powerful magnets.
• The App is available on the Apple app store and Google Play store.
• Batteries included

SmartDry works with Alexa!

Add smart new features to your Alexa smart speaker! You can simple ask your Alexa the status of your clothes and dryer. You will also get notifications on your Alexa when new status updates are available so that any one that is home can be alerted.

A team you can count on!

SmartDry is designed and assembled in the US with 100% US based support. We strive to provide the best experience for our customers long after you first install SmartDry!