14 best water supply line for refrigerator ice maker
A water supply line for a refrigerator ice maker is a crucial component that allows your refrigerator to produce ice and dispense cold water. Here is some information about it:
Purpose: The water supply line serves as a conduit to deliver a continuous supply of water to the refrigerator's ice maker and water dispenser.
Connection: It typically connects to your home's plumbing system, often at the nearest sink's water line or through a dedicated water line behind the refrigerator.
Material: Water supply lines are usually made of either copper or flexible plastic. Copper lines are durable and less prone to leaks, while flexible plastic lines are easier to install.
Installation: To install a water supply line, you'll need to shut off the water supply, connect the line to the refrigerator's water inlet valve, and then connect the other end to your home's water source. Ensure a secure and leak-free connection.
Water Pressure: It's important to maintain the right water pressure for the ice maker to function correctly. Typically, water pressure should be between 35 and 120 pounds per square inch (PSI). You may need to install a water pressure regulator if your home's water pressure is too high.
Filters: Many refrigerators with ice makers also come equipped with water filters. These filters help purify the water before it reaches the ice maker and water dispenser, ensuring cleaner and better-tasting ice and water.
Maintenance: Regularly inspect the water supply line for any signs of leaks, kinks, or damage. Replace the line if you notice any issues to prevent water damage to your home.
Safety: If you're not confident in your plumbing skills, it's advisable to hire a professional plumber or technician to install or service the water supply line. This can help prevent leaks and ensure the proper functioning of your refrigerator's ice maker.
Compatibility: When purchasing a water supply line, make sure it is compatible with your refrigerator's make and model. Different refrigerators may require specific types or lengths of supply lines.
Water Shut-Off Valve: Consider installing a dedicated water shut-off valve for the refrigerator's water supply. This allows you to isolate the water supply to the refrigerator in case of leaks or maintenance.
In summary, a water supply line for a refrigerator ice maker is a critical component that ensures a constant flow of water for ice production and cold water dispensing.Proper installation, maintenance, and safety precautions are essential to ensure it functions correctly and avoids potential water damage issues.
Below you can find our editor's choice of the best water supply line for refrigerator ice maker on the market
Fluidmaster 12IM72 Ice Maker Connector, Braided Steel-1/4 x 1/4" Compression Thread, 6 Ft. (72") Length, 6-Foot, Stainless Steel
Fluidmaster
Product description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
User questions & answers
| Question: | Can I use this in a hot water aplication |
| Answer: | It all depends on what you would use them. To unclog a blockage probably still best to use a plunger. I can only imagine using them in a sink or tub drain. |
| Question: | Does this line meet California Prop 65 lead free requirements |
| Answer: | The hair etc gets pretty entwined around the plastic and is difficult to remove. I believe you get 5 so you won’t have to try and take the hair etc off the tool. They are strong/sturdy and we have not had any break. They work really well! |
| Question: | Made where |
| Answer: | Twist into drain while pushing, twist out slowly and pull. |
| Question: | Do I need to use teflon tape for this |
| Answer: | Yes. Absolutely. Just dispose of all of the gunk it grabs from the drain and rinse it off and it's ready to go again. |
Product features
Fluidmaster 12IM72 Ice Maker Connector
The water supply line connects the ice maker on your refrigerator to the wall water supply and allows water to flow through the line. This Fluidmaster Ice Maker Supply Line is available in a variety of lengths, all with a flexible, high quality construction. Key details include:
Fluidmaster: The Leader In Toilet Repair
Since 1957 Fluidmaster has been the customer’s first choice for toilet replacement parts. Fluidmaster toilet parts are found in more toilets than all other brands. This 12IM72 Ice Maker Connector showcases the ease of use and high quality Fluidmaster is known for. Fluidmaster strives to innovate better products for the consumer, while offering effective solutions to common toilet problems. The 12IM72 Ice Maker Connector replaces old, or ineffective designs, with durability that will last. Fluidmaster trusted and proven quality in toilet repair.
Shark Industrial 25 FT Stainless Steel Braided Ice Maker Hose with 1/4" Comp by 1/4" Comp Connection
Product description
- Two layers PVC core with reinforced nylon wires in between and 304 stainless steel braided outer cover for high performace and durable water supply applications
- 1/4" comp x 1/4" comp connectors fits most of the Ice Makers
- Comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372
- While typical water supply pressure ranges 50 - 80psi, our hoses are rated 290psi with burst strengh up to 1500psi.
- Working temperature ranges -40 to 210F
- Come with 10-year warranty for added peace of mind
- ONE 304 stainless steel braided premium icemaker hose with 1/4" comp x 1/4" comp connection.
- BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for effective protection against rust and burst. Some other hoses are not using 304 stainless steel for the braided cover and could result in rust even burst.
- INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372
- EASY FIT - Our hoses connect to ice maker with standard 1/4" comp connections compatible with most ice makers.
User questions & answers
| Question: | Would this work for a air compressor connected to a train horn in my truck |
| Answer: | Generally, NO. Ice-maker and refrigerator lines are typically only rated for cold water. For hot water, select a hose designed for a dishwasher or washing machine. |
| Question: | How can you double that length |
| Answer: | All brass contains at a minimum, trace amounts of lead. Whether that meets the requirements of Popr 65, I do not know. But I would never use any brass components for any drinking water application, or even water I would bath or brush my teeth with. Use stainless steel, polyethylene, or polypropylene plastic. |
| Question: | Can this be used for a hot water line to a humidifier |
| Answer: | Made in China |
| Question: | Where is it made |
| Answer: | You do not need teflon tape. It is a compression fitting. |
Certified Appliance Accessories Ice Maker Water Line, 15 Feet, PVC Core with Premium Braided Stainless Steel
Certified Appliance Accessories
Product description
For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance's manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.
From the Manufacturer
Ice Maker Connectors (15-Foot)
- 1/4 x 1/4 INCH CONNECTOR HOSE – 1/4 inch FCM (Female Compression) x 1/4 inch FCM stainless steel fittings with washers & permanently attached stainless steel couplings & brass stems provide secure connection.
- BUILT TO LAST - Clear vinyl surrounds a flexible & durable PVC inner core tubing that's woven with polyester for added strength under pressure.
- STAINLESS STEEL - The premium stainless steel outer braid resists punctures, crimping and kinking. This durable design protects against bursting & cracking.
- CERTIFIED FOR YOUR SAFETY – This hose is UPC (Uniform Plumbing Code), NSF 61 & 372 lead-free (National Sanitation Foundation), & CSA (Canadian Standards Association) certified for product safety.
- 5-YEAR LIMITED WARRANTY – If your hose isn’t in perfect working condition for at least 5 years, we’ll send you a new one free of charge.
User questions & answers
| Question: | Does this fit a Bosch refrigerator |
| Answer: | Ours makes coffee hot enough to burn you. I've never had any problems with this coffee maker. |
| Question: | could this also be used instead of plastic tubing to run water from the filter to lets say a sink drinking faucet or a water cooler |
| Answer: | To assure that the pot will hold the heat of the brewed coffee, fill the pot with hot tap water or water heated in an electric tea pot. Allow to stand at least five minutes. The pot will get warm enough to hold the heat of the brewed coffee if you soak the inside of the pot with hot tap water or boiled water for 5 minutes before you start the brew. |
| Question: | I installed the hose six weeks ago and there is still a bad taste with the ice. If we use an ice tray the ice cubes taste fine. Suggestions |
| Answer: | Sorry, because the printer case is out of stock. Therefore it cannot be purchased. |
| Question: | Your company is not listed as certifed for nsf/ansi 61's website, even though you claim it is. can you explain why it's listed in product description |
| Answer: | Yes, the printing command of Milestone printer is ESC/POS. |
Product features
The best products to extend the life of your appliances
Premium products specifically designed to help DIYers, landlords, and licensed professionals
Reliable Accessories
Certified Appliance Accessories are constructed to meet or exceed industry certification standards and appliance manufacturer requirements.
Your Appliance Connection Solution
We offer a wide variety of products to meet the needs of hundreds of homes and businesses across the country!
PEX Ice Maker Installation Kit 25 Feet of Tubing for Appliance Water Lines with Stop Tee, 1/4" Compression Fittings, for Potable Drinking Water
JS Jackson Supplies
Product description
Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- BRASS STOP TEE allows you to safely use this set up for your makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4" x 3/8" x 3/8" and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND BRASS. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The brass stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4" x 3/8” x 3/8”. Limited lifetime warranty.
User questions & answers
| Question: | Does this connect to a 3/8” stop valve |
| Answer: | This is for ice maker. You probably need an air hose for your application |
| Question: | purchased this. apparently the cold water line under my sink is 1/2". is it ok to buy adapters and install before my kitchen sink |
| Answer: | 3/8 x 3/8 compression union fitting should do it, or check with your plumber |
| Question: | What size U bracket would I need to mount this tube |
| Answer: | This hose is for ice maker. Humidifier typically uses pex tubing. You can type Humidifier pex tubing on Amazon and find one for your application. |
| Question: | I was thinking of buying this tubing set but is there a prop 65 warning, and is the tee copper or brass |
| Answer: | China |
Ice Maker And Humidifier Installation Kit by Choice Hose And Tubing Poly Tubing, Includes Everything For Installation, Lead Free, Adapt Water Lines and Pipe Connections To Refrigerator and Freezer
Product description
Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!
- EASILY CONNECT TO YOUR REFRIGERATOR OR FREEZER. Attach to your fridge / freezer and enjoy a cup of delicious, crisp water with crystal clear ice cubes in no time! Great for both on-the-door ice/water dispensers and in-freezer ice cube machines. Poly tubing is lead-free and completely safe for potable water, and will leave your water tasting as fresh and pure as before.
- SET UP YOUR HUMIDIFIER/EVAPORATIVE COOLER IN NO TIME! Quickly and easily attach to your boiler or furnace, then sit back and enjoy the results. Poly tubing is durable and reliable; connect your humidifier now and enjoy it for years to come.
- POLY TUBING is durable, reliable, and will leave your water tasting as fresh and pure as before. Set includes ¼” X 25’ poly tubing- enough to comfortably accommodate any ice maker/ humidifier/ evaporative cooler installation.
- COMPLETE INSTALLATION KIT includes poly tubing, self-piercing saddle valve, and fittings This universal, all-inclusive kit is designed with metal fittings to ensure a solid and dependable connection. Included instructions make DIY installation a breeze!
- NO NEED TO TURN OFF WATER. Easily complete installation without the hassle of shutting off your water supply while you work. EASY DO-IT-YOURSELF INSTALLATION. Includes step-by-step instructions. Limited lifetime warranty.
User questions & answers
| Question: | Does this kit have the ferrules and fittings for the fridge side? It seems not many kits do |
| Answer: | yes |
| Question: | What is the rated PSI of the tubing |
| Answer: | There are adapters that can reduce the fitting size to accommodated the installation kit. You should be able to connect the kit anywhere you can install the adapter after the shut off valve. |
| Question: | Is this lead free |
| Answer: | The smallest size you will easily be able to find is probably 1/2" tube strap. Best practice is to use similar materials together which for this application would be plastic. The tube will lay on the straps without being pinched. |
| Question: | I need 50 feet, anyone |
| Answer: | The tee is made with lead-free brass. This item is NSF 61 certified, which is required by plumbing codes & standards. This product is safe to use for potable water! The reason for the Prop 65 warning is California. Most all manufacturers that sell their products in California use the warning on mostly all of their products. Thanks for your inquiry! |
LDR Industries 509 5100 Ice Maker and Humidifier Installation Kit 1/4-Inch x 25ft Flexible Hose for Potable Water Filter System, Poly Tubing
LDR Industries
Product description
The Ice Maker and Humidifier Installation Kit will surely help you achieve the clear and sparkling ice cubes and drinking that you've been longing for. A must have household kit that is hassle-free and durable. This installation kit includes everything you need from the complete tool kit up to the step-by-step instructions to make the Do-It-Yourself Installation hassle-free. Install our Ice Maker knowing it is covered under our limited lifetime warranty.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
- FUNCTIONALITY: This Ice Maker and Humidifier Installation Kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing water filter system.
- COMPATIBILITY: Supply pure water from your water filtration system to your refrigerator, water coolers dispenser, and humidifiers using our Ice Maker and Humidifier installation kit.
- INCLUSION: Complete set of 1/4-Inch x 25ft Polyethylene Tubing that is durable and will not corrode. Includes self-piercing saddle valve and fitting.
- INSTALLATION: This kit is easy to install and gets the job done fast without any inconvenience. The self-piercing saddle valve quickly penetrates your pipe to divert the water where you want it to go and without turning off your water supply. Installation instructions included.
- WARRANTY: Comes with a Limited Lifetime Warranty on Ice Maker and Humidifier Installation Kit.
User questions & answers
| Question: | When pushing the plastic tubing, with insert into a metal nptf fitting, which direction should the tapered plastic compression ring face |
| Answer: | The tapered end faces the matching taper inside. |
| Question: | If I were to connect 2 - 25’ pieces and extend it to 50’, what size coupler do I need |
| Answer: | Thank you for your inquiry. There is a 1/4" compression union included with this kit that can be used to connect the two tubes. |
| Question: | How does it pierce? And what can it pierce? In the saddle kit |
| Answer: | Made to pierce copper 1/2 in line. It has a sharp hollow point and the the saddle with gasket is tightened down to prevent leaking |
| Question: | Is there a way I can tap into the water line to the sink, using a threaded tee for the icemaker line, instead of having to pierce copper pipe |
| Answer: | Maybe the manufacturer can respond to this question. You're basically asking if you can totally restructure the product to be used in a way that goes against its simplistic design and make it revert back to a use that it was designed to replace. Dave Martin |
Ice Maker Hose (20 FT) - Fridge Hose - Icemaker Water Supply Line - ¼” x ¼” Connections - Stainless Steel Braided
Product description
This Ice Maker Water Supply Line comes ready to install your ice maker or fridge to the water supply. The hose features a stainless steel braided exterior to bend freely without kinking or crimping. Each end is a standard ¼” and has brass fittings to ensure a solid connection. To give you peace of mind, our hose is UPC certified and AB 1953 Lead-Free. Made from Superior grade 304 Stainless Steel. The interior is corrosion resistant to survive harsh water conditions.
- QUICK INSTALLATION: Easy to install for residential or commercial use. Ideal hose for homeowner or contractor installation. Perfect hose to install your ice maker or fridge to the water supply.
- HIGH QUALITY HOSE: Made from superior grade 304 Stainless steel with excellent corrosion resistance and formability. Hose is durable and will bend freely without kinking or crimping, especially in cramped quarters.
- FEATURES: Each end has ¼” x ¼” connections to fit securely. The Brass fittings on each end ensure a solid connection. Burst proof to withstand higher water pressure for added home protection.
- CONSTRUCTION: UPC Certified and AB 1953 Lead Free for peace of mind. This supply line is safe to supply water to ice makers or water dispensing refrigerators.
- WARRANTY: All Hippohoses come with a 5 year warranty. A happy hose is a Hippohose.
User questions & answers
| Question: | where is it made |
| Answer: | 2 kits may be cheaper than buying the tubing. |
Eastman 41033 Braided Stainless Steel Ice maker Connector, 5'
Eastman
Product description
The Eastman Braided Stainless Steel Ice Maker Connector is the standard in water supply lines. The supply line features a non-toxic PVC core, a multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 Stainless Steel braided exterior that is designed to prevent bursting, kinking and crimping. Measuring out at a length of 5 feet, this ice maker connector is designed to fit an inlet and outlet that accept 1/4 inch Compression x 1/4 inch Compression connections. It also is equipped with nickel-plated brass nuts to resist corrosion and provide a more secure connection. This flexible supply line includes all necessary pieces for an easy installation. CUPC (Canadian Uniform Plumbing Code), CSA (Canadian Standards Association), NSF and Lead-Free certified for product safety.
From the Manufacturer
Eastman's 5' Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can't see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
- Equipped to fit 1/4 inch Comp x 1/4 inch Comp inlet and outlet connections
- This stainless steel ice maker connector measures 5 feet in length
- Features durable nickel-plated brass nuts to resist corrosion and provide a more secure connection
- Constructed of a non-toxic PVC core, a multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior to prevent bursting, kinking, and crimping
- Certified CUPC, CSA, NSF, and Lead-Free for product safety
User questions & answers
| Question: | What country was this item made in |
| Answer: | Don’t purchase it...water taste was terrible...buy a pex water line! |
| Question: | This icemaker hose is lead free |
| Answer: | Yes there was a ferrule that fit my fridge connection |
| Question: | can two of these be connected |
| Answer: | 75 PSI |
| Question: | how many come in the order |
| Answer: | Thanks for your inquiry. Yes, it is lead free. |
Product features
About Us
Founded in 1920, Eastman is a specialty materials company that produces a broad range of products found in items people use every day. With the purpose of enhancing the quality of life in a material way, Eastman works with customers to deliver innovative products and solutions while maintaining a commitment to safety. The company’s innovation-driven growth model takes advantage of technology platforms, deep customer engagement, and differentiated application.Eastman employs approximately 14,500 people around the world and serves customers in more than 100 countries.
With a foundation of honesty and integrity at the center of our values, we strive to always do the right thing. From maintaining safe and reliable operations to developing insights that benefit our customers to innovating the future, we’re focused on making a difference for the many people who count on Eastman.
Beaquicy Ice Maker Water Connector Line - 6 FT (72-Inch) Stainless Steel Braided Hoses with 1/4-in compression x 1/4-in compression
Product description
PRODUCT DESCRIPTION: The 6-ft Ice Maker Water Connector With PVC core, reinforced nylon thread in the middle, and 304 stainless steel braided jacket, it can achieve high performance and durable water supply applications. The typical water supply pressure range is 50-80psi, but our hose is rated at 290psi and burst strength can reach 1500psi. Operating temperature range -40 to 210F
PACKAGE INCLUDE:
1 Pc * 6-ft Ice Maker Water Connector
FIXES THE FOLLOWING SYMPTOMS:
Burst of ice maker water line
Water leak
EASY FIT: Our hoses compatible with most ice makers connect to ice maker with standard 1/4" comp connections .
PLEASE NOTE:The brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Thanks.
- ✅ ITEM NUMBER: 6-ft 304 stainless steel ice maker connector with 1/4" comp x 1/4" comp connection.
- ✅ PRODUCT SPECIFICATIONS: This is a high-quality braided stainless steel hose to connect your refrigerator's ice maker to the water supply.
- ✅ STAINLESS STEEL: The 6-ft stainless steel ice maker connector features a PVC core, multi-filament braided nylon reinforcement and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This durable design prevents cracking and rupture.Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability.
- ✅ EASY FIT: The 6 FT (72-Inch) Stainless Steel Braided hoses compatible with most ice makers connect to ice maker with standard 1/4" comp connections .
- ✅ ABOUT SERVICE : The product 6-ft 304 stainless steel ice maker connector supports 30 days return and exchange.Our company attaches great importance to the shopping experience of each customer. If you have any questions during shopping, please contact customer service in time. We will try our best to solve the problem.Thanks.
Certified Appliance Accessories Ice Maker Water Line, 25 Feet, PVC Core with Premium Braided Stainless Steel
Certified Appliance Accessories
Product description
For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance's manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.
- 1/4 x 1/4 INCH CONNECTOR HOSE – 1/4 inch FCM (Female Compression) x 1/4 inch FCM stainless steel fittings with washers & permanently attached stainless steel couplings & brass stems provide secure connection.
- BUILT TO LAST - Clear vinyl surrounds a flexible & durable PVC inner core tubing that's woven with polyester for added strength under pressure.
- STAINLESS STEEL - The premium stainless steel outer braid resists punctures, crimping and kinking. This durable design protects against bursting & cracking.
- CERTIFIED FOR YOUR SAFETY – This hose is UPC (Uniform Plumbing Code), NSF 61 & 372 lead-free (National Sanitation Foundation), & CSA (Canadian Standards Association) certified for product safety.
- 5-YEAR LIMITED WARRANTY – If your hose isn’t in perfect working condition for at least 5 years, we’ll send you a new one free of charge.
User questions & answers
| Question: | What size male/male coupler is needed to connect two of these types of hoses with the same size fittings |
| Answer: | China |
| Question: | How do I use this for a swamp cooler |
| Answer: | Yes! |
| Question: | Can this be used for Hot water |
| Answer: | No. This hose has female connections on both ends. |
| Question: | Does this have a prop 65 warning |
| Answer: | Only one come in each order. |
Product features
The best products to extend the life of your appliances
Premium products specifically designed to help DIYers, landlords, and licensed professionals
Reliable Accessories
Certified Appliance Accessories are constructed to meet or exceed industry certification standards and appliance manufacturer requirements.
Your Appliance Connection Solution
We offer a wide variety of products to meet the needs of hundreds of homes and businesses across the country!
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
Product description
Get your appliances set up quickly and easily with this ice maker, humidifier, water filter and evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation. Limited lifetime warranty. Make it yours today!
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- BRASS STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4" x 3/8" x 3/8" and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND BRASS. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The brass stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4" x 3/8” x 3/8”. Limited lifetime warranty.
User questions & answers
| Question: | Can the saddle be used on pex lines |
| Answer: | 1/4" X 1/4" |
| Question: | What size hole do I need to drill in the floor to run the pipe to the basement? The brass fittings are rather large and they don't come off |
| Answer: | Thank you for your inquiry. This is an ice maker water line, so it may not work for your application. Please check with the manufacturer of your swamp cooler concerning this inquiry. |
| Question: | Does anyone know if any special connections are needed at the ice maker by using this pex line? Most pex is a little different in external size |
| Answer: | Yes it is capable of handling hot water up until a certain degree but it is made for refrigerator. |
| Question: | I need to attach to two ice makers from one water line. How can that be done |
| Answer: | Chemical known to cause Cancer and Reproductive harm. Lead and Lead Components. Warning: This product complies with lead free standards for drinking water. External components not contacted by water may expose you to one or more chemicals, including lead or lead compounds which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Highcraft CNCT2662-OM Line, Connects Water Supply, Ice Maker hose With 1/4" Fittings On Both Ends, Braided Stainless Steel, 2 Ft
Product description
This is a Highcraft lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 24 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.
- EASY INSTALLATION: Ice Maker Hose Is Quick And Easy To Install To Your Refrigerator Water Line
- TIGHT SEAL: Ensures No Water leakage When Connecting To Your Fridge Supply Hose
- BURST PROOF: Water Supply Lines is Made Of High Tensile Strength Braided Stainless Steel Protects PVC Inner Tube For maximum Pressure And Performance
- UNIVERSAL FIT: Ice Maker Connector has 1/4 Brass chrome fitting on both ends and is compatible with most icemakers
- HIGH QUALITY: Our Ice Maker Water Line Was Manufactured With Superior Quality Stainless Steel And Guaranteed. To Deliver You Fresh, Clean,Delicious Water Minus The Despised '"Plastic Taste" or '"Rubbery Smell"
User questions & answers
| Question: | Does the use of the stainless steel hose change the taste of the filtered water |
| Answer: | I would think no. |
| Question: | Does this have a Prop 65 warning |
| Answer: | Thanks for your inquiry. You would need to drill a 5/8” hole. |
| Question: | Does this have a Proposition 65 warning |
| Answer: | Thank you for your inquiry. Both ends of the Pex line are 1/4" compression threads, which is the industry standard for ice maker kits. You should not need any special connections to install. |
| Question: | Can it be used for hot water |
| Answer: | Put a splitter on the line: https://www.amazon.com/ZAOJIAO-Splitter-Connect-Fittings-Reverse/dp/B06Y2BB53Z/ref=sr_1_34?dchild=1&keywords=quarter+inch+pex+splitter&qid=1594396540&sr=8-34 |
Product features
A perfect supply line hose for your ice making machine
This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has two 1/4 inch compression fittings on both ends. With chrome plated brass nuts part of the hose, it prevents corrosion and rust suing lifetime use. Durable construction ensure years of reliable performance.
*We offer a comprehensive line of water supply, tubular & drainage products for kitchen, lavatory, and general plumbing applications. These high quality products are designed for commercial and residential markets.
Whirlpool 8212547RP Pex Ice Maker Hook-Up Kit, white
Product description
This is a genuine replacement part.
From the Manufacturer
Refrigerator water supply kit includes everything needed for easy installation and fits most refrigerators. Refrigerator water supply kit provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers. Refrigerator water supply kit contains one 5-Feet pex tubing and fittings.
- Update or fix ice-dispensing appliances
- Includes everything needed for easy installation
- Fits most major refrigerator brands
- Provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers
- Includes one 5-foot pex tubing and fittings
User questions & answers
| Question: | will this attach to a standard 1/4 compression fitting or if the nut on one end is cut off will the tubing attach to a 1/4 shark-bite fitting |
| Answer: | I believe it is a rubber hose with stainless steel sleeve around it. No taste has been noticeable for us. |
| Question: | Can this be used to replace the water dispenser tubing for Whirlpool fridge model ed5fvgxws |
| Answer: | ye it does |
| Question: | Where is this pex tubing (8212547rp) made |
| Answer: | Does not meet any prop 65 items. It is stainless steel!!!! |
| Question: | Doesnt look like pex fittings? What type of fittings |
| Answer: | Yes of course |
Braided Stainless Steel Ice Maker Water Supply Hose - 10 Ft - Universal 1/4" Connectors from Kelaro
Product description
Stainless Steel Ice Maker Supply Line Hose 10 Ft (120-in) Burst Proof 1/4" Compression Connections - Lead Free
- 10 FOOT LONG, 1/4" Compression Thread x 1/4" Compression Thread Stainless Steel Braided Ice Maker Installation Kit
- EASY TO INSTALL. Connect most refrigerator ice makers, in-door water dispensers and filters to household water supply. Perfect for Homeowner or Contractor Installation
- Premium Grade 304 STAINLESS STEEL, PVC Core. BRASS nuts, ferrules and nipples for superior Corrosion Resistance
- BURST PROOF Icemaker Hose Design and 5 YEAR Limited Warranty
- LEAD FREE AB 1953 Safe for drinking water, UPC (Uniform Plumbing Code), NSF 61 (National Sanitation Foundation) and CSA (Canadian Standards Association) Certifications
User questions & answers
| Question: | How's the work on Samsung's refrigerators |
| Answer: | Both ends have a 1/4 inch compression nut. The receiving fitting must have a wide enough opening to receive the end of the pex tube (look at the blown-up picture). This should fit just fint on the inlet on the fridge. On the other end, depends what you have installed. There are at least 2 types of copper shut off valves, one of these (a fitting for a flanged copper line I believe) will not work. Yes, if you cut off one end, it should fit the shark-bite. Btw _H_D_ also carries this exact line (except GE branded) |
| Question: | is this good for inside the wall |
| Answer: | I don't know this model, but I think it should be, because that tubing is fitting most fridge. I use it for Samsung fridge. |
| Question: | Will it work with whirlpool model # gc5shexnb |
| Answer: | I can’t tell you where it’s made, but I buy it at Home Depot, Lowe’s. I’m sure yo can search it on amazon too. |
| Question: | Where is it made |
| Answer: | The material is pex, but the fittings are standard 3/8 compression nuts that fit the back of the fridge and the shutoff valve. |
Latest Reviews
View all
Sociology Of Death
- Updated: 12.01.2023
- Read reviews
Car Upholstery Cleaners
- Updated: 30.05.2023
- Read reviews
Day Beard Trimmer
- Updated: 10.03.2023
- Read reviews
Patches
- Updated: 20.02.2023
- Read reviews
Journaling Bibles
- Updated: 18.02.2023
- Read reviews