11 best whirlpool freezers

Product description

This universal Appliance LED Light Bulb has a standard socket base and is compatible with many refrigerator and range models, check to see if your model number is compatible. The frosted bulb has a 3. 6-watt output. Replacing the bulb will require no hand tools or repair experience.

• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains Appliance LED Light Bulb
• No tools required for installation
• This part is a replacement for the following part numbers: W10311527, 2260802, W10194423
• This product is a universal accessory item compatible with several brands

User questions & answers

Question:	is this compatible with Bosch light bulb part #00631824 which apparently has been discontinued by Bosch
Answer:	Its less orange i would say. But its not bright enough. I think the silver cover made it less orange and less bright. Actually im really disappointed.
Question:	Can I use it inside as the replacement in the oven
Answer:	You could but you would need several bulbs with vertical upright receptacles, depending on the size of your fireplace. Might look nice in a dimly lit room.
Question:	Is this compatible with maytag light bulb
Answer:	Yes.the Aizhiweng-LED flame bulb has 4 kinds of modes - flame emulation mode,breathing mode,general light mode and gravity induced mode. Just turn on/turn off the switch,you can see that the mode will be changed.
Question:	Does this light up blue
Answer:	Dear customer, Thanks for your question and letting us help you know this LED flame light bulb. For your question, please kindly note that the flame light bulb fits the standard E26 base. Hope this answer is useful for you to know this LED flame light bulb. Have a nice day! Best regards,

Product description

Refrigerator & Freezer Start Relay Overload for W10189190 Whirlpool.



This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; W2319792,w10448878,297237702,WR07X10097,WR08X21100,W10448874,2312074,241941005,eecon qd tsd2,241941004,241941005.W10197428 2319792 WPW1089190 .



Works with the following models: Maytag ASD2522WEB01, Maytag ASD2522WED01, Maytag ASD2522WES01 Maytag ASD2522WEW01, Maytag ASD2522WRB02, Maytag ASD2522WRB03 Maytag ASD2522WRD02, Maytag ASD2522WRD03 Maytag ASD2522WRS02, Maytag ASD2522WRS03.



fits some Kenmore, Whirlpool, Amana, Maytag and KitchenAid refrigerators and freezers.

• Refrigerator & Freezer Start Relay Overload for W10197428 TSD2 Whirlpool
• This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; W2319792,w10448878,297237702,WR07X10097,WR08X21100,W10448874,2312074,241941005,eecon qd tsd2,241941004,241941005.W10197428 2319792 WPW1089190
• Works with the following models: Maytag ASD2522WEB01, Maytag ASD2522WED01, Maytag ASD2522WES01 Maytag ASD2522WEW01, Maytag ASD2522WRB02, Maytag ASD2522WRB03 Maytag ASD2522WRD02, Maytag ASD2522WRD03 Maytag ASD2522WRS02, Maytag ASD2522WRS03
• fits some Kenmore, Whirlpool, Amana, Maytag and KitchenAid refrigerators and freezers
• Unplug the refrigerator before installing this part,Safely store any food that could deteriorate while the power is off. Wear work gloves to protect your hands.

Product description

This is a Genuine Replacement Part ,The Model Number and Name for the Following Item: Whirlpool (WHIRA) 67005140 Freezer Door Handle.

From the Manufacturer

This is a Genuine Replacement Part ,The Model Number and Name for the Following Item:Whirlpool (WHIRA) 67005140 Freezer Door Handle

• Whirlpool (WHIRA)
• Genuine Replacement Part
• Refrigerator-replacement-parts

User questions & answers

Question:	Fit ARB2202cw
Answer:	It will fit an ARB2205CW. Didn't locate a 2202. It's for Amanna, Whirlpool and Maytag
Question:	Is this part compatible with whirlpool model number eb2shkxvq
Answer:	I have no way of knowing, contact your local appliance parts store and they should be able to answer your question
Question:	Is this compatible with an amana/maytag abb1921deq
Answer:	Not sure but I think so
Question:	Is this compatible with a Kenmore Model#596.65262700 refrigerator
Answer:	No, This is only compatible for bottom freezers

Product description

Refrigerator Freezer Door Gasket, Grey

• Country of Origin: CHINA
• The Package Length of the product is 7 inches
• The Package Width of the product is 5.6 inches
• The Package Height of the product is 4.8 inches

User questions & answers

Question:	Does it fits whirlpool wsf26c2exf01? seems to be 20” x 66” on the fridge and on the freezer 15” x 66”, need them both
Answer:	Yes, it is. There are 2 D-ring on the waist belt, but you need to use 2 separate leash to run with you two Jack Russell.

Product description

IMPORTANT; There are two of these lights used in your refrigerator. One is located in the back panel cooler side, the other one is located in the freezer side. The led light located on the ceiling is main led board W10515058, you need to make sure the main board works well before replacing any of the other two ligths, the secondary light are being fed power thru main led light. If main led does not work, the secondary led will not work.

• Quality Design Backed by Icetech 1 YEAR WARRANTY for Peace of mind - The package includes one high quality led light designed fit for Whirlpool and many other major brands
• This high quality part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid.
• Replacing Part Number: WPW10515057, W10398007, W10515057, PS11755866, AP6022533.
• There are two of these lights used in your refrigerator. One is located in the back panel cooler side, the other one is located in the freezer side. The led light located on the ceiling is main led board W10515058, you need to make sure the main board works well before replacing any of the other two ligths, the secondary light are being fed power thru main led light. If main led does not work, the secondary led will not work.
• Make sure to DISCONNECT the refrigerator before replacing the led to avoid burning the new led.

User questions & answers

Question:	Does this led light fit the Kenmore Coldspot , model no
Answer:	Have not had that problem.
Question:	This works for kenmore model
Answer:	This clock is misrepresented as a battery operated clock. It is a plug in clock with a back-up battery. It also does not hang well. The directions are also pretty vague. Those were the disappointing aspects.
Question:	all the three lights on my Kenmore don't work, if i replace the main led light, would that help turn on the other lights
Answer:	Standard plug
Question:	I have a whirlpool refrigerator model #wrs331fddw, what led lights do i need
Answer:	No, this digital day clock be shipped from America

Product description

"Description:

Quantity:1 pcs

Color:Silver

Material:Metal

Product Size:4.5x2.5cm /1.77x0.98inch

Weight:44g



Features:

1.The replacement part is made from durable high quality material and well-tested by the manufacturer.

2.2.Replacement for Whirlpool,be sure to check your current model to ensure that this model will fit properly in your product.



Package List:

1 x WP842177 Refrigerator Freezer Door Key"

• 1.The replacement part is made from durable high quality material and well-tested by the manufacturer.
• 2.Replacement for Whirlpool.Be sure to check your current model to ensure that this model will fit properly in your product.
• Replaceable part numbers: 06599905, 08037402, 12849, 216388700, 530027402, 5308037402, 6599905, AH426673, C000460771, EA426673, F000113978, F115646, G157033, K1235141, K1244302, PS426673, WR05X0065, WR05X1AH5029, WR05X503461991, WR05X501991 , EA1991481, WR05X5036, WR05X5050, WR5X5010, WR5X5029, WR5X5036, WR5X5050, WR5X65, WR5X72, LP12981.
• Note: If you are not sure about compatibility, you can send us your refrigerator model and original part number, and we can help you confirm whether it is suitable.

Product description

This is a genuine replacement part. The model number and name for the following item is: Whirlpool WP2313637 Freezer Grind Cutter Assembly

From the Manufacturer

Whirlpool 2313637 Grind Cutter for Freezer. Works with the following models: Whirlpool GI15NDXTB2, Whirlpool GI15NDXTQ2, Whirlpool GI15NDXTS2, Whirlpool GI15NFLTB2, Whirlpool GI15NFLTB3, Whirlpool GI15NFLTS2, Whirlpool GI15NFLTS3. Genuine Whirlpool Replacement Part.

• Works with the following models: Whirlpool GI15NDXTB2, Whirlpool GI15NDXTQ2
• Whirlpool GI15NDXTS2, Whirlpool GI15NFLTB2
• Whirlpool GI15NFLTB3
• Whirlpool GI15NFLTS2, Whirlpool GI15NFLTS3
• Genuine Whirlpool Replacement Part
• Directly Replaces: 2313637, AP3859445, 1173209, 2185614, 2217280, 2313601, AH988982, EA988982, PS988982, W10218012, W10536696

User questions & answers

Question:	I have a kitchen aid model # kuis18nnts1 will this part work with my icemaker
Answer:	Yes
Question:	I have a kitchen aid superba icemaker model kuis15nrhs9: will this fit
Answer:	Yes it is the exact match
Question:	Will this work for A Kitchenaid kuic15nrxs
Answer:	It works on a GE monogram
Question:	I have a whirlpool gi15ndxxs will this replacement work for this model
Answer:	it is an exact fit for your model

Product description

This is a genuine replacement part.

From the Manufacturer

Replacement or add-on ice maker kit assembly for refrigerators and some full sized upright freezers. Check your Use & Care guide to see if your refrigerator accommodates and ice maker kit.

• Whirlpool Genuine Part
• Commonly used with Whirlpool, KitchenAid, Roper, and Inglis brands
• Most often used on top freezer and bottom freezer refrigerators
• Ice Bucket/Bin included

User questions & answers

Question:	Will this fit a Whirpool WRT311FZDW? My old 4 pin icemaker doesn't fit the 8 pin connection on my new WRT311FZDW
Answer:	In theory, yes you could do that. Then the question becomes “where is a safe place to do such?” Without full technical specs I’m not sure where you could drill through and not run the risk of damaging wiring or cooling coils.
Question:	Will this fit Roper model RT18BKXKQ01, just want to make sure. thanks
Answer:	The opening is 3 inches. The bolt holes for the tower are 3.75 inches center to center.
Question:	what ice maker kit
Answer:	I’m not sure exactly where the beer is leaking out in your case but it sounds like you may not have the faucets completely secured. As I’m sure you are aware each spot on the tower has a threaded collar that tightens onto the threads on the faucet. The collar has 3 or 4 small holes that are for use of the included faucet wrench. You don’t have to overtighten but it should be quite snug. Also, The faucet has small splines that must line up and mesh with the spot on the tower. There should be a rubber gasket between the two. I hope this gets your drafts flowing!
Question:	can this be used as a replacement for kitchen aid # 2198597 ice maker
Answer:	Lower your PSI. If you just hooked it up, sometimes the keg is still shook up a bit.
Question:	Will this fit with model wrs315sdhz
Answer:	To the letter yes, however I have mine now in place as a built in but I’ve left a gap around it to allow air flow from the back to front. Gap is about 1 inch all around and it’s working great. That said if I replace someday I’ll probably get one with a forward facing fan so it would work more effietently as a built in
Question:	this part it equivalent for whirlpool model 7ED2HCQXSL00 part
Answer:	Yes, in fact I have seen the smaller version of this very unit used in hotel bars. It maintains temp, holds 3 kegs and pours well. Very quiet and looks sharp in a kitchen full of stainless appliances and black counter tops.
Question:	Is this the upper shelf that slides out
Answer:	I couldn't get 3 to fit, but it says 3. So I had a patient friend of mine look into it. He figured it out. And then I took a sharpie to mark the positions. One in the back, sort of in the middle, the other 2 closer to the door and toward the corners. Hope that helps.
Question:	Anybody got an idea why this product is so high in cost, like other reviews said, it's just plastic and glass
Answer:	This unit does not have an option for exterior gas tank mounting.

Product description

This part is also known as: Motor-Evap.

Compatible brands and models include but are not limited to:

Whirlpool: EL7JWKLMS02, EL7JWKLMS03, EL7JWKLMS04, EL88TRRWQ01, EL88TRRWQ02, EL88TRRWS01, EL88TRRWS02, EV160NZTQ00, EV160NZTQ01, EV161NZRQ02, EV161NZRQ04, EV161NZRQ05, EV161NZTQ00, EV161NZTQ01, EV165NXTN00, EV171NYMQ00, EV171NYMQ01, EV171NYMQ03, EV171NYMS00, EV171NYMS01, EV171NYMS04, EV181NZTQ01, EV181NZTQ02, EV188NYWQ00.

Unsure about compatibility? Reach out to us on the PartsBroz store front or in the customer questions and answer section.

• ✅ PART NUMBER 3-60336-001: It is a high-quality exact equivalent for part numbers 4390914, 68001613, PS11740626.
• ✅ COMPATIBLE BRANDS INCLUDE: Whirlpool, Amana, Crosley.
• ✅ FIXES THE FOLLOWING SYMPTOMS: Noisy; Too warm.
• ✅ COMPATIBLE WITH PRODUCT TYPE: Freezer, Refrigerator.
• ✅ HIGH-QUALITY PARTS: All the parts meet or exceed all original manufacturer specifications for fit and performance. They offer the durability you need at a fraction of the cost of other alternatives. We provide a lifetime warranty and guarantee 100% money back.

• ✅ MODEL NUMBER: 482731 Evaporator Fan Motor Kit (including two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade).
• ✅ EASY TO INSTALL: It is made exactly fit for most top name brands (Kenmore, Whirlpool, KitchenAid, Roper, Estate, Caloric, Amana, Maytag). Fits models: 1065730523, 106722540, 106725360, 106727300, 1067600303, 1067600323, 1067602221, 1068364763, 1068364775, 1068364792, 1068370570, 1068374490, 1068374742, etc.
• ✅ REPLACEMENT PART NUMBER: PS376645, 0056721, 0056801, 1003, 1100473, 1100474, 1100992, 1105608, 1105609, 14210061, 14218828, 14218831, 2154419, 2154977, 2169116, 2169143, 2631, 4318001, 4389140, 46000482731, 482470, 482731, 482731, 482731VP, 482733, 548697, 549420, 8112, 851170, 8537621, 936162, 938117, 938149, 938287, 938292, 938296, 941547, 946653, 989687, 99989709, AP3110929, FSP482731, R0950025, Y0056721, Y0056801.
• ✅ PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. This part fixes the following symptoms: Noisy | Fridge too warm | Freezer section too warm | Fridge and Freezer are too warm.
• ✅ MONEY-BACK GUARANTEE: For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked.

User questions & answers

Question:	Will it fit whirlpool wrs571cihz counter depth fridge
Answer:	No, it won't fit your model.
Question:	Will this work on kitchen aid kkrsc503ess
Answer:	No, it won't fit your model.
Question:	Will it fit a kenmore
Answer:	No, it won't fit your model.
Question:	I have an amana bx21* or bc21* series model, is this motor compatible? numbers on mine are as follows: gi afa 29425-22, 115v-60hz .25 lra
Answer:	I'll begin by saying, I am not an expert. While researching parts I learned that this fan uses a "C frame" motor and "C frame" motors are pretty much all the same. The only thing I found that may be different is the mounting hardware between models or the shaft may be thicker but it comes with a bracket and the fan so that won't matter. As far as the 115v- 60hz it's a standard house current and the L.R.A. is Lock Rotor Amps or Load Run Amps - just the amount of amps it uses. The motor did not fit on my original bracket (thin shaft) but I used the bracket that came with it. It's kind of a one size fits all set up. If it doesn't fit your bracket the one that comes with might work. I had to retrofit (bend) mine to fit, it wasn't a big deal. My freezer is an old Kenmore from the 1990's and it still fit. Freezer and refrigerator parts are all basically the same to a point.

Product features

482731 Refrigerator Evaporator Fan Motor Kit by BlueStars

The 482731 Refrigerator Evaporator Fan Motor Kit is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves, two #8 mounting screws, and a push-on fan blade. This part pulls air into the evaporator coils and then disperses the air in a continuous motion throughout the refrigerator and freezer.

Fixes the following symptoms:

1. Noisy
2. Fridge too warm
3. Freezer section too warm
4. Fridge and freezer are too warm

Perfect Fit

Compatible with most top name brands (Kenmore, Whirlpool, KitchenAid, Roper, Estate, Caloric, Amana, Maytag) and replaces part numbers: PS376645, 0056721, 482470, 482731, 482731, 482731VP, 482733, 548697, 549420, 8112, 851170, 837621, 936162, 938117, 938149, 938287, 938292, 938296, 941547, 946653, 989687, AP3110929, FSP482731, R0950025, Y0056721, Y0056801.

Premium Quality

The product is made of strong & durable materials that prevents cracking and failing during the installation and use process.

Saving Solution

Enjoy the great feeling when your refrigerator is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble.

Repair Solutions Buy With Confidence Promise

BlueStars’ replacement parts are manufactured of high-quality and durable materials free from harmful chemicals. By doing numerously strict tests and reviews performed by our experienced engineers and development team, we commit all products to meet OEM standards and are safe to use.

Product description

IMPORTANT; Your refrigerator has 3 leds. One on the ceiling, the other two on the rear panel in the cooler and freezer side. This is the led located on the ceiling. If any of the leds are defective, all three will NOT work. If you buy this led and still the leds do not work, that means you have short circuit with other two leds. You need to buy 2 pieces of W10515057 and replace all three to have working leds.Make sure to DISCONNECT the refrigerator before replacing the led. High chance of causing short curcuit if you change the led while refrigerator is plugged in. connected. IMPORTANT; Before Purchasing this item, you must check the other two led lights in the refigerator. One is located in the mid section of the cooler side, the other one is located in the freezer side. If any of these lid lights are bad they must be replaced before the new main board. if these led lights are bad it will cause the main board to burn shortly after installation.

• Brand; Icetech / This high quality part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid.
• W10515058 replaces: WPW10515058, W10465957, W10522611, WPW10515058VP, PS11755867, AP6022534, 3021142.
• Quality Design by Icetech Backed by 1 YEAR WARRANTY for Peace of mind
• Your refrigerator has 3 leds. One on the ceiling, the other two on the rear panel in the cooler and freezer side. This is the led located on the ceiling. If any of the leds are defective, all three will NOT work. If you buy this led and still the leds do not work, that means you have short circuit with other two leds. You need to buy 2 pieces of W10515057 and replace all three to have working leds.
• IMPORTANT; Before Purchasing this item, you must check the other two led lights in the refigerator. One is located in the mid section of the cooler side, the other one is located in the freezer side. If any of these lid lights are bad they must be replaced before the new main board. if these led lights are bad it will cause the main board to burn shortly after installation.