13 best power amp for cars

Product description

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Bridgeable

Delivers two channels or bridge mono for subwoofers. The PB171X cranks out 2 x 50 watts RMS at 4 ohms and is 2-ohm stereo stable for 75 watts x 2.

Selectable Crossover Modes

The built-in crossover can be set to full for normal full-range systems, or low-pass/high-pass for delivering specific frequencies to components or subwoofers. Low-pass and high-pass frequency controls are provided for setting the crossover frequencies.

Input Versatility

The PB717X includes both high-level and low-level inputs, so you're covered with the various types of car stereos. The high-level inputs take direct speaker wire leads, while the low-level use RCA plugs.

To further match the amplifier to your receiver/head unit, a variable input level control is provided to dial in the perfect setting without distortion.

Bass Boost

Subwoofer fans rejoice: The PB717X features a bass boost of up to 18 dB, for added rumble.

MOSFET Power

The MOSFET pulse width modulated power supply helps provide excellent sound quality, minimal distortion, and efficient power handling.

Comprehensive Protection

High-performance audio requires a lot of power, and things can get hot quickly. Like any solid car amplifier, the PB717X features protective circuits. Overload and thermal indicators let you know they've activated and shut off the amp. In the event of a short circuit, power protection is provided in the form of easily replaceable fuses.

PB717X Specs

What's in the Box

Pyramid PB717X power amplifier and user's manual.

• 1000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1000W bridgeable output. Features variable subwoofer crossover, variable gain control and high level low impedance MOLEX input connector
• SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio
• DISTORTION-FREE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you w/ crisp and clear audio for an outstanding music experience
• THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
• SLIM SIZE DESIGN: This box amp's small size makes installation a breeze, you'll have no trouble finding a spot for this little yet powerful device. Additional features include LED indicators, RCA low level inputs and automotive type fuse protection
• Included Components: 1 Pyramid Branded Product

User questions & answers

Question:	can this push 1 15inch kicker cvr alone
Answer:	It is DC powered. It is easily powered off a vehicle / boat battery. The included power adapter converts AC to 12v DC.
Question:	Why is this amp rated 1000w? When it shows 50x2 or bridged 75w x2? Either way im not seeing more than 150w
Answer:	No !! It does not come with a remote...
Question:	i am lost, i am looking to power just two 6 inch, 120 watt .4 ohm wakeboard speakers in my jeep, i don't need thumping, just good sound for a jeep, a
Answer:	Hi, unfortunately no. You cannot boost or add wattage to this unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PFA330BT for more details. Thank you.
Question:	Im only using this amp to power 1000w door speakers. Can i bridge the remote output wire to the 12v connection on amp instead of battery connection
Answer:	No. You are better off using a mono block amp

Product features

2 Channel Car Stereo Amplifier

• Two Channel Bridgeable Amplification, Tri-way Configuration:1/ 2 Channels
• 2 x 50 Watts Total Output 4 Ohms, 1000 Watts Total System Output 4 Ohms
• Variable Gain Control, MOSFET Pulse Width Modulated Power Supply
• Built-In Variable Subwoofer Crossover, High Level Low Impedance MOLEX Input Connector
• RCA Low Level Inputs, Speaker Output Terminal Strip
• Signal/Noise Ratio: 90dB, THD Less Than 0.04%
• Frequency Response: 15-30kHz, Overload Protection
• Thermal Protection, Short Circuit Protection
• Power On LED Indicator, LED Diagnostic Condition Indicator
• Automotive Type Fuse Protection

Product description

Crunch PX 1000.2

• 250 Watts RMS x 2 @ 4 ohms
• 500 Watts RMS x 2 @ 2 ohms
• 1000 Watts RMS x 1 Bridged @ 4 ohm
• Total Peak Power: 1000 Watts
• Speaker-level (high-level) inputs

User questions & answers

Question:	can this amp push 2 dual coil 12" sub at 900 watt per sub
Answer:	It looks like the maximum output for any single port is 18W (2A@9V, 1.5A@12V), but that is based on the QC3.0 spec (hence the higher voltages than typical for USB). Obviously, you can't run all 6 ports at max output (the 4 QC3.0 ports would max out at 72W, and the maximum total output is 75W). There are 4 QC3.0 ports, and the other two have a maximum output of 3A@5V.
Question:	Is this amp good for 2 10 inch boss dual voice coil wired for 2 ohm the paper said they are 4 ohm speakers what can be wired for two on which is bette
Answer:	Mine is aprox. 5.25in x 3in x 1.25in
Question:	Amp says 1000w @4ohm.i have new alpine 1000w swt12s4 12" tube 300w rms will speaker handle amp. one speaker bridged
Answer:	Yes, these are standard usb ports and they should work with any usb-powered devices. Have you checked the connection ends? Please contact Amazon Message if the problem persists and we are glad to help.
Question:	Will this amp run a 10 inch 400 rms at 2 ohms good? Or is it going to over power the sub
Answer:	Production of this charger adapter in black color is several weeks behind schedule at the moment due to some reasons. We will keep you posted once the product is available. Thank you!

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Specifications:

Model:V12 705

MAX Power: 4ohm 120w

RMS Power: 4ohm 60w

THD: ＜0.02%

Bridged Power:200w/4CH

Frequency Response:20Hz~20KHz

Operating Voltage:12V

Impedance:4Ω

Maximum Power:3800W (950W x 4)

Dimension:32CM*26CM*6CM

Material:Aluminum Alloy



Package includes:

1 X 4 Channel Car Amplifier

4 X Screws

1 X English User Manual

• Brand new and reliable quality 4 Channel Car Amplifier
• Can connect to 4 speakers,6 phase high frequency intermediate frequency low frequency regulation
• Double low frequency output,can be push any size Subwoofer within 160W rated power
• This 4 channel amp is also equipped with fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.

User questions & answers

Question:	Will this amp push 2 6"9 and 2 front door speakers
Answer:	It does. I have a 2010 Escape and it fits both in the flat and angled positions.
Question:	Is this made to connect to a subwoofer
Answer:	Excellent product Two sockets, 2 USB ports. Sometime it gets a little loose in the car socket when I have my cellphone plugged in and I pull the phone away from the port. No real problem. Buy it.
Question:	Signal to noise ratio? 2 ohm stable
Answer:	No not at all
Question:	Can I connect another amplifier to this one
Answer:	Yes, that is what I purchased it for.

Product description

Specifications:

The 2-way power distribution block allows you to connect as many as three amplifiers to a single power source. The main input lets you connect 4 or 1/0 Gauge wire from your battery to the block, and you can run up to three 4-Gauge or 8-Gauge wires to your amplifiers.



Features:

Type: 1 Way In 2 Ways Out power Distribution block

Distribution Block Weight:90g

Size:45 x 40 x 28mm/1.77" x 1.57" x 1.1''" (L*W*H)

Screw-down Wire Clamps

Input: 0GA/2GA/4GA Gauge Wire

Outputs: 4GA/8GA/10GA Gauge Wire

Impact Resistant Snap-on Plastic Cover

Platinum-Plated for Corrosion Resistance

Offers complete protection for your car audio system



Note:

For your vehicle’s protection, it is better to put an inline fuse holder between the distribution block and your vehicle’s battery.It can also be used to combine the ground wires of multiple amplifiers to a single grounding point.



Package included:

1 x 2 Way Car Power Distributor Block Holder

• Power/Ground Distribution Block
• 1-0/2/4 Gauge AWG In,2-4/8/10 Gauge AWG Out
• Made of High Performance Copper
• DuHigh Temperature Base,High Strength Nonperishable Industrial-grade Plastic Cover
• Suitable for auto car,RV,ATV,boat or other vehicles, protect your vehicle's audio amplifier system

User questions & answers

Question:	Can I use this for a battery and starter
Answer:	Yes
Question:	How much currentthis thing handle
Answer:	I used it on 12v, works good for me. No trouble so far.
Question:	Is this UL rated
Answer:	No idea. Alls it is is a metal block with Allen key screws. Plastic case. Nothing more.
Question:	Can i use it in reverse. 4 in 1 out : to connect 4 solar panels into a controller
Answer:	I don't see why it would not work. Only thing is the mounting holes are close to contacts.

Product description

Power Acoustik CB1-8000D 8000W Class D Amplifier

• Direct Short, Thermal, & Overload Circuit Protection
• High/Speaker Level & Low Level/RCA Input
• Variable 12dB High & Low Pass Crossovers
• Package weight: 42.3 lbs

User questions & answers

Question:	Can they push 2 15 8000 wattts
Answer:	Wire them series/parallel at 4ohms to the bridged/mono connections 500 watts x 1 shared, those Boss subs can take a lot, but 500 is enough to create some respectable bass, and your enclosure is ported, 500 is plenty, and the 2ohms may be louder at low volumes, but 4ohms has more of a quality/clean sound, but you could always go 250x2 at 2ohms parallel with stereo sound, if you need wiring help search "dvc subwoofer wiring options" and pick one you like.
Question:	will this amp push a single 12inch mofo thats wired up to 4ohm and sound good
Answer:	Your sub is too big for the amp. I have generic 10inch sub rated at 1000 watts, speaker blew the amp in a couple of weeks. Spend more for a better amp.
Question:	What wire gauge front speakers terminals
Answer:	I'm think the it's fine for two ten inch
Question:	Will it push 2 mofo 15 that's 2ohm? Is this amp a true 8k or what's the max
Answer:	I use all of ports at once, but I only drive short distances. It charges, but I can't guage how fast it charges. It performs well on short distances.

Product description

We’re in a time where small is “in”. Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you have to sacrifice big power for your system. Overdrive amplifiers pack huge amounts of power into a smaller chassis thanks to efficient full-range Class A/B topology and SMT technology. Complimented with every possible preamp adjustment, Overdrive amplifiers leave nothing to be desired

• High efficiency full range amp
• 2 ohm stereo and 4 ohm bridged Class D full range
• 2 ohm minimum impedance monoblock operation
• 3,500 watts max power
• 140 watts x 4 + 300 watts x 1 at 4 ohms

• 1/0 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet / Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
• 18 Gauge Blue Remote Wire: 17 Feet | CCA is Less Conductive than OFC Wire!
• 20 Feet FT / 16 GA Speaker Wire | Thick In-Line ANL Fuse Holder/ 200 Amp ANL Fuse
• True Sound 17 Feet FT Double Shielded RCA Cable | Complete Installation Accessories included
• Wire Gauge Set To International Wire Gauge (exceeds Standard AWG).

Product description

4 Gauge Amp Kit General Features: 4 gauge Power Amplifier Installation Kit Designed to install one amplifier Designed specifically for 2800 watts Peak Power Rating Power and ground wire provides optimal power transfer Made from 100% oxygen free tinned copper (CCA) for a pure uninterrupted transfer of power Includes AGU Fuse holder for ideal protection Premium 2 channel RCA interconnect cable included 2 Year Manufacturer's Warranty Package Includes: 17' 4 Gauge Red Power Wire 3' 4 Gauge Black Power Wire 17' RCA Cable 17' 16 Gauge Speaker Wire 18' 18 Gauge Remote Wire AGU Fuse Holder 80 Amp AGU Fuse Black Wire Loom Terminals, Zip Ties, and Screws Free Priority Shipping within the United States Returnable: Yes (within 30 days) Fine Print This wire is set to the international wire standards not the American Wire Standards.

• 17' 4 Gauge Red Power Wire
• 3' 4 Gauge Black Power Wire
• 17' RCA Cable
• 17' 16 Gauge Speaker Wire , 18' 18 Gauge Remote Wire
• AGU Fuse Holder , 80 Amp AGU Fuse, Terminals, Zip Ties, and Screws

User questions & answers

Question:	Will these wires fit an alpine mrx m100 amp
Answer:	Yes
Question:	Does it come with a fuse
Answer:	2 or 4 ohm
Question:	Is this what i need for a 600 watt amp
Answer:	Yes
Question:	Will these be good for a 1500 watt amp
Answer:	It can be is not going to hit that hard like it suppose to

Product description

The razor Series of amplifiers from Power Acoustik Pack huge amount of power into small chassis thanks to efficient full-range class d topology and smt technology. Complemented with every possible preamp adjustment, the razor amplifiers leave nothing to be desired! the Compact 4.75" wide chassis allows mounting in very small places where other amps just will not fit. The rz1‐3500d is a monoblock amp, with 3,500-watts Max. Rms at 4Ω is 900 Watts x 1. Overall dimensions are 1.63"H x 4.75"W x 12.25"D.

• Class D
• Small, Compact 4.75" chassis
• Mosfet PWM power supply

User questions & answers

Question:	Can this amp push 3 10' subs
Answer:	Yes
Question:	How many channels is this amp
Answer:	16 or 14 gauge should be good. Or whatever wire that can basically fit in the whole.
Question:	Does this amp come with a dash mount gain control module
Answer:	No it is not a 8k amp and it will push mofo 15s i have mine running on 2 mofo 122x. The amp will do roughly 1900 at 1ohm and maybe 1500 @2ohm this amp is similar to the soundstream Ar1-8000 google the dyno.
Question:	Is this amp can give me a blast out of my 2 15" lanzar subwoofer
Answer:	Yes

Product features

Power Acoustik RZ1-3500D 3500W Class D Monoblock Amplifier

The razor Series of amplifiers from Power Acoustik Pack huge amount of power into small chassis thanks to efficient full-range Class D Topology and SMT technology.

Complemented with every possible preamp adjustment, the razor amplifiers leave nothing to be desired! the Compact 4.75" wide chassis allows mounting in very small places where other amps just will not fit.

The rz1‐3500d is a monoblock amp, with 3,500-watts Max. RMS at 4Ω is 900 Watts x 1. Overall dimensions are 1.63"H x 4.75"W x 12.25"D.

Product description

-LEIGESAUDIO is the symbol of high-quality car audio.

-All of our innovative products are designed and engineered for high performance by the best industry experts from different countries.

-To fit your system needs,we offer a series of complementing connectors and accessories-all designed to work together precisely.

• Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block
• 1-0/2/4 Gauge In,2-4/8 Gauge AWG Out
• Solid Brass,Gold-Plated for Corrosion Resistance
• The Cover Is Made Of High Strength, Nonperishable Industrial-grade Plastic
• Applicable to auto, boat or other vehicles, protect your audio system.

User questions & answers

Question:	Can this take 8 gauge in
Answer:	Yes but the fuse isn’t to good
Question:	The outputs are smaller than 4 gauge, how do i remove the adaptors
Answer:	Yes
Question:	How do i remove the clear cover
Answer:	No this is CCA wire. maybe for five hundred watts.
Question:	So when you buy this does the ferrule come
Answer:	Nope🙃 it’s 8k Watts max so it’s not gonna push 8k the whole play time...

Product features

AWG GAUGE IN WITHOUT REDUCER

4 AWG GAUGE WITH REDUCER IN

WIRE HOLE

Product description

The brand is dedicated to creating the finest pieces of mobile electronics that bring terrific value and suit to today’s busy lifestyles. For decades these guiding principles has remained unchanged. Power Acoustik stands at the modern-edge of the audio/video product evolution with an intense R&D as well as continuous improvement of its existing designs. Year in and year out, Power Acoustik creates more high-end mobile electronic products that offer a host of state-of-the-art features that supersede previous models, as well as your expectations. Out-of-the-box thinking, innovation in design and features are what sets Power Acoustik the head and shoulders above the rest.

• Class D Full Range Amplifier
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged
• MOSFET Power Supply with Audiophile Grade IR Transistors
• Military Grade SMT PCB
• Maintains Dynamic Performance

User questions & answers

Question:	Will this amp push 2 12"boss phantoms?1050 rms each sub
Answer:	1 but it pushes my 2 15 good
Question:	What gauge wire does this amp take
Answer:	Yeah but the wire they send you doenst plug into the amp
Question:	Is it bridgeable
Answer:	Most definitely. When this Amp is wired correctly, it's amazing. If your woofers are duel 4ohm, wire each one at 2ohms X 2 would be 1ohm =3500w. If they are single voice coil 4ohm, wired together is 2ohm. I'm pretty sure that's 2400w at 2ohms
Question:	Is it 1 ohm stable? The description only mentions 2 and 4 ohms
Answer:	4 gauge is the correct size and is also what is recommended in the owners manual.it states 4 gauge on page 7.

• 25-FEET (7.62m) [ RED 8 GAUGE POWER/GROUND WIRE ] - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow.
• COPPER CLAD ALUMINUM (CCA) - CCA wiring provides a good conductor for power transfer. This is the most economical option when choosing power or ground wire. Systems that require more power should consider OFC wiring.
• RUGGED PVC JACKET - Allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance.
• EASY POLARITY IDENTIFICATION - This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment.
• SOFT TOUCH JACKET - The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

User questions & answers

Question:	Can i used it on 220 electric power
Answer:	Jus take the collet out
Question:	which wire is the best ofc or cca
Answer:	Screws on bottom
Question:	What is the cable diameter in millimeters on the 8 guage wire
Answer:	no , this one is just a split
Question:	how many amps can this take
Answer:	Depends, need more info, how many RMS each sub is, is it SVC or DVC? Can't really give any idea of an answer without that info at least.