Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

Brand new in box!

• Carbon-injected plus one cones are larger than others in their size class, meaning they move more air and make more bass
• Soft-dome tweeters feature oversized voice coils for greater heat dissipation and higher power handling resulting in smooth, fatigue free highs
• The patented i-mount system allows unparalleled flexibility whether you flush- or Surface-mount your component tweeters
• A dual-level tweeter volume adjustment helps compensate for less-than-perfect speaker placement, and can even be set to suit your personal listening preference and musical taste
• Low-impedance, three-ohm speakers compensate for the undersized wires found in many of today’s cars, and make the most of every watt your car stereo can deliver

User questions & answers

Question:	would these speakers fit a 2007 jeep liberty
Answer:	Yes. Just order the same size for the car
Question:	What all comes in the box? Two tweeters, i hope
Answer:	Yes, 2 mids, 2 tweeters and 2 crossovers
Question:	Will these fit my 2010 nissan alitma as replacement
Answer:	Hi The best would be to check with your installer before you purchase the unit. Thank you,
Question:	Will it fit a 2003 Mini Cooper
Answer:	Yes and no. The speaker size is correct but NONE of the mounting brackets that come with it will work. I put these in my 2002 cooper S. You can custom mount them or order mini mounting brackets. I just drilled new holes for the brackets it came with.

Product features

JBL Premium 6.5-Inch Component Speaker System - Set of 2

JBL engineers designed the GTO 609C component speaker to produce strong, clear sound from a head-unit or amplifier capable of delivering up to 270 watts of power. This makes the GTO 609C an ideal match to systems powered with head-unit or factory-amplifier power levels. Even better, the speaker matches many of the GTO Series amplifier combinations. As a result, it can keep up with systems that feature one or more subwoofers and satisfy high-fidelity audiophile listeners. And its great power-handling specifications also increase reliability over the lifetime of the speaker.

The GTO 609C’s Plus One carbon-injected cones provide more overall speaker-cone area than other cones in its class. With an effective increase in cone area, the speaker radiates more air. Also, its carbon-injected cone material produces a lighter and stiffer cone. The result is a better low-frequency response and a greater ability to make those important musical notes that people often associate with larger speaker sizes.

• This electronic transparent stereo speaker kit must be the most interesting DIY kit you have ever encountered, it’s really a beautiful speaker box with the Shining lights and transparent shell.
• It is easy to assemble and equipped with nuts, screws and other components, you can do it by yourself, a cool project and challenging enough to be fun.
• The led lights will illuminate according to the music spectrum.
• Speaker Power: 3W per channel, Material: PCB + Electronic components, Dimensions: 60 x 60 x 62mm.
• Please note: Use 30W (110V) Soldering Iron.

User questions & answers

Question:	Can you use these as computer speakers
Answer:	Yes my grandsons play with each other
Question:	Do you need glue for the speaker transparent boxes
Answer:	its fitted to stay in his backpack to carry
Question:	Love building these different projects, can i use the 7 color flasher led's instead of the blue one's for color
Answer:	I don't know, but they can play together (4 players)
Question:	Why do you have to use a 30watt sodering gun
Answer:	The frames and legs of Slam Ball, Slammo and Spike Ball are plastic (PVC).

Product features

Specifications:

• Material: PCB + Electronic components
• Speaker Power: 3W per channel
• Installation: DIY welding assemble
• Shell Size: 60 x 60 x 60 mm

• Equipped with some nuts, screws and other electronic components for you to do it by yourself.

• The product is used for learning. Suit for people above 16 year's old with 1 year electronic diy experience. Or use it correctly under the guidance of electronic specializer.

Warm tips:

• This is the latest version, is smaller than before and the circuit is more concise, the old version please search ASIN: B01MZYNW5Z
• Comes with online English user manual, which will guide you how to finish step by step, perfect for school basic electronics experiment projects.
• If you need technology supports, or meet other problem, please send e-mail to us, we will help you as soon as possible.

Product description

Package contents: crossovers: 2 sets woofer: lb-d6. 8Iibtweeter: lb-q1rvent tube and paper tube cabinet: 2 sets grill and frame: 2 sets driver cushions screws: 72 pcspcb veneer surface terminal box acoustic cotton stuffing speaker wire rubber feet: 8 pc stapes suggested Tools: wood clamps, wood glue, diagonal pliers, hammer, scissors, Solder, soldering iron, Allen wrench, cross-point screwdriver, brush, and sandpaper

• 2. 0 bookshelf speakers – full-range sound for accurate image and balanced frequency response.
• System Type - a two-way fourth order vented bookshelf speakers. Free. Range 43 Hz – 20kHz. Sensitivity 86 dB power 10W – 120W
• Long throw woofer – 3” voice Coil. Shielded vented Magnet system. Mineral-filled polypropylene Cone.
• Dome tweeter – 1” fabric dome, shielded, designed to withstand elevated temperatures. Especially good at reproducing Female vocals.
• Easy assemble – with all necessary parts equipped, including speaker cabinets, drivers, screws, wires, acoustic dampening material, grill covers, crossover and other related electronic components. Some tools required.

User questions & answers

Question:	Is there a good center channel (preferrably diy) to match the 3.1 kit
Answer:	Because you have a USB line, that is the power input, and a stereo plug , you can easily use them for computer speakers if your computer has the corresponding jacks.
Question:	What is the overall dimensions of the assembled enclosure ? Thanks
Answer:	No glue needed at all. Part of the boxes are already fastened (glued?) together. Just the one side with the speaker needs to be fastened to the box and that is done with the supplied screws.
Question:	How do you find out the polarity of the woofers. They werent marked red for positive
Answer:	Sure, the kit supports a two wire LED if your flasher LED is self contained and requires no controller yes.
Question:	What's in the box
Answer:	you dont and the person that said 30 watts is the minumum is incorrect. 25W is appropriate for most PCB soldering. Any higher and you'll melt the traces off the circuit board if you hold the iron on longer than a second. For really small-scale stuff (like SMT) you'd probably want a 15W iron. Unless you're soldering something to a large piece of metal 25W is more than sufficient

Product description

The WSA-5RP providing premium-quality audio for stereo audio applications operating in the 5.2G/5.8GHz bands with 2 x 50W low-hear class D amplifier built-in. Simply connect the transmitter module to you're A/V processor and the receiver to your passive bookshelf / rear surround sound speakers and powered/active subwoofer

• ✅[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid the WiFi interference with your 5G network, for near lossless audio and provides excellent transmission stability
• ✅[Easy Connection with A/V Receiver System] comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio amplifier, A/V receiver or preamp.
• ✅[High Efficiency Amplifier Built-In] 2 x 50W RMS @ 4 ohms load Class D amplifier, allow you to connects directly to any passive bookshelf or the rear surround sound loudspeakers.
• ✅[An additional subwoofer connection] provides an additional subwoofer mono input and output, for connecting between AV Receiver and Power/Active Subwoofer Speaker or Subwoofer Amplifier.
• ✅[Wide Transmission Range] - Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio.

User questions & answers

Question:	Is this unit fcc or ce certified
Answer:	Yes, it has FCC ID certified
Question:	Can you install two of these to create 7.1 surround sound
Answer:	Yes you can
Question:	Does it have auto standby power for when the AVR is turned off
Answer:	The wireless receivers will turns to mute status once there is no audio signal detected on both transmitter/receiver.
Question:	Can this be used with a pair of 80watt, 6ohm speakers
Answer:	Yes, no problem for running the 6 ohms speakers

Product features

NO More Wires for connecting your Rear Surround Speakers with A/V Receiver

Elegant White, Light Weight Design

Tired of running cables around doors or hiding under carpet to connect your rear surround speakers and subwoofer to the receiver? Or having limited options on rear surround speakers and subwoofer placement due to cable length and component location?

The WSA-5RP providing premium-quality audio for stereo audio applications operating in the 5.2G/5.8GHz bands with 2 x 50W low-hear class D amplifier built-in. Simply connect the transmitter module to you're A/V processor and the receiver to your passive bookshelf / rear surround sound speakers and powered/active subwoofer

[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid the WiFi interference with your 5G network, for near lossless audio and provides excellent transmission stability

[Easy Connection with A/V Receiver System] comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio amplifier, A/V receiver or preamp.

[High Efficiency Amplifier Built-In] 2 x 50W RMS @ 4 ohms load Class D amplifier, allow you to connects directly to any passive bookshelf or the rear surround sound loudspeakers

[An additional subwoofer connection] provides an additional subwoofer mono input and output, for connecting between AV Receiver and Power/Active Subwoofer Speaker or Subwoofer Amplifier

[Wide Transmission Range] - Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio

Connecting Diagram & Application

Vertical Stand included

The unit comes with a pair of clear vertical stand, allows you to store your WSA-5RP system in its upright vertical position.

Premium Gold-Plated Binding Post Speaker Output Connectors

The high quality Gold-Plated Binding Post Speaker Output Connectors, is perfect and easy for connecting any loudspeakers or the rear surround speakers in a 5.1/7.1 channel setup, can be used with bare wire – or connect the banana plugs to the end of the speaker wire.

5.2 & 5.8GHz Dual-Band Selectable

Comes with the latest dual band as 5.2 / 5.8GHz wireless technology connection with total 62 channels auto selection from RF channel 5727~5848 (Blue color LED with 5.8G mode) & 44 RF channel 5157~ 5243 (Green color LED with 5.2G mode), to avoid and decrease possibility of interference from the wireless networks routers, cell phone, garage doors, R/Cs, and other 2.4G/5G WiFi network devices.

Package Contents

-Transmitter x 1

-Receiver (built-in amplifier) x 1

-9V AC adapter (for transmitter) x 1

-24V AC adapter (for receiver) x 1

-6-foot speaker cable x 2 - for a pair of speakers

-Owner's Manual x 1

-Stand x 2

Product description

Rocketfish wireless speaker system. Used, very good condition .Thank you very much

User questions & answers

Question:	Can the device be controlled remotely, volume and or on/off
Answer:	Unfortunately I’m not aware of any as this was released as a stereo pair.
Question:	Will this work with the auto speaker calibration function of a Pioneer receiver
Answer:	The enclosure is 16.5" high x 8.5" wide x 13" deep (13.5" deep with grill on). or 41.91cm high x 21.59cm wide x 33.02cm deep (34.29cm deep with grill on).
Question:	Can this be connected to speaker output on amplifier
Answer:	Hook up a Nine Volt battery to the terminals. When the Positive Terminal to the Battery is on the Positive Terminal of the Woofer the Cone will move outward. It moves inward if polarity is reversed.
Question:	Is there any delay wgen u play it
Answer:	As seller indicated - the entire kit. Here is a brief breakdown of what is in the box based on the package that I have received. The package comes with all the parts for 2 speakers (one pair). For each speaker you get: 1) Three drivers RT1.3-B isodynamic ribbon tweeter DMN-B dome midrange driver L6-4R woofer 2) Part's for speaker enclosure: 7 x pre-cut MDF speaker enclosure panels: 1 x top, 1 x bottom, 1 x front, 1 x back, 2 x sides, 1 x division panel inside the enclosure to enforce the structure. 1 x MDF Grill frame + 1 x black grill fabric cloth to cover the grill frame 2 x Black wood grain Vinyl veneers to cover the exterior of the enclosure 1 x Speaker port(vent) tube 1 x Terminal box 2 x 1.5" thick white acoustic foam paddings 3) Crossover Components 1 x PCB Circuit board 4 x Air Inductors 3 x Resistors 5 x Capacitors 1 x long speaker wire to connect between the PCB and drivers. 6) Other accessories: Screws/threads/retainers/holding pegs/Cushions/Swan Sticker/Rubber feet and etc. 7) last and most important: Assembly manual. Again, the breakdown listed above is for one speaker. Multiple by two are all you get in the package. The parts all looks high quality to me. Especially the Inductor coil is coated with red polypropylene film. It just stunning. I hope that helps!

Product description

Pyle Model : PLG6C

6.5'' 2Way Component Speaker System

6.5'' 400 Watt 2Way Custom Component System

This Custom Kit Contains

One Pair 6.5'' Mid Bass Speaker

Standard 6.5'' Size Fits OEM Locations

Yellow Color Poly Injection Cone

NonFatiguing Butyl Rubber Surround

High Temperature Aluminum Voice Coil

Special Electroplated Steel Basket

40 Oz. Magnet Structure

Power Handling: 200 Watts RMS / 400 Watts MAX

Impedance: 4 Ohm

Frequency response: 50Hz5KHz

Mounting Depth: 2.65"

One Pair 0.5" Tweeter:

0.5'' Silk Dome Tweeter

Neodymium Magnet

3 Mounting Options: Flush, Surface or Angle Mount

50 Watts RMS / 100 Watts peak

Frequency response: 1.322KHz

Impedance: 4 Ohm

One Pair Passive Crossover Network:

Two Way Passive Crossover

12 dB Octave Slope

Accessories

Includes Grills Wires Installation Hardware

Wiring Kit

Wiring Diagram Template

Cutout Size: Φ142 mm

Get in gear with the Pyle Gear series These speakers are designed to provide the best quality sound for the budgetminded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' midbass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware it's a perfect way to upgrade and expand the range of your factory system. The midbass speakers pump with 400 watts of power and fit in most OEM locations. The 100watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the midbass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

Part of Pyle's Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware--it's a perfect way to upgrade and expand the range of your factory system.

6.5-Inch Mid-Bass Speakers

These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you'll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet.

1/2-Inch Tweeters

The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle's mounting locations and get the best possible treble focus.

Passive Crossover Networks

Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound.

Easy Installation

A full wiring kit and all the installation hardware you'll need to add this system to your vehicle are included, along with a wiring diagram.

About Pyle Audio

Pyle Audio's legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems.

Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous.

PLG6C Specs

What's in the Box

Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.

• 6.5” Mid Bass Speakers: The 6.5 inch woofer features an eye catching yellow color poly injection cone; Non fatiguing butyl rubber surround keeps your speakers secure and ensures that the product will last for a long period of time
• High Quality Sound: Listening to good music while on the road has never been this good; The component audio speaker has high temperature ASV voice coil which provides the richest sound, ensuring low distortion and providing an open sound stage
• Heavy Duty Component:The 40 oz magnet structure, special electroplated steel basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response; It features Standard 6.5” size that fits OEM locations
• Multiple Mounting Options: Allows 3 mounting Options flush, surface or angle; This 4 ohm component also features a mounting depth of 2.65”, ensuring your speakers will stay in place
• Wiring Kit Included: This audio speaker compensates the undersized wire found in many of today’s cars; Includes grills, wires and mounting hardware; Midrange tweeter helps to provide smooth & loud sound
• 400watt 2way custom component system includes pair of woofers, tweeters, and crossovers
• 6.5inch woofers with yellow poly injection cones and butyl rubber surrounds

User questions & answers

Question:	i will be installing these in my Toyota scion TC do i need to install these little cross over things or can i rock with out them please help
Answer:	Hello friend the unit support Carplay and Android Auto, if your car is Android system ,it will suitable and please note this unit is International Standard Double DIN , as long as your car is 2 DIN. It will fit very well.
Question:	I might pair these with boss ch6530 chaos series 6.5-inch 3-way speakers. which ones should i put in the front door
Answer:	Hello friend the unit is 7 Inch double din, it support Android auto and Carplay, if your car is double dDin, it will suitable regards Jacky
Question:	it states free shipping yet the item was $35.54..yet my total was $44.96 ????? where did the $9.42 go to
Answer:	On the description of the radio they list the Iphones that are compatible..
Question:	will they fit in a Harley davidson sattle bag
Answer:	It works with my iPhone 11

Product features

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Steel Basket

Get in gear with the Pyle Gear series These speakers are designed to provide the quality sound for the budget-minded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' mid-bass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware - it's a perfect way to upgrade and expand the range of your factory system. The 100-watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the mid-bass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

Product description

Tired of running cables around doors or hiding under carpet to connect your powered subwoofer to the receiver? Or having limited options on powered subwoofer (or active/powered speakers) placement due to cable length and component location?

The Dynasty ProAudio WSA-5TR-V2 with Dual Band as 5.2 / 5.8GHz wireless technology connection with total 62 channels auto selection from RF channel 5727~5848 (Blue color LED with 5.8G mode) & 44 RF channel 5157~ 5243 (Green color LED with 5.2G mode), to avoid and decrease possibility of interference from the wireless networks routers, cell phone, garage doors, R/Cs, and other 2.4G/5G WiFi network devices. This WSA-5TR-V2 Wireless Transmitter/Receiver Kit is design for the powered subwoofers (or active/powered speakers), which is a excellent device for those that want to start up their home theater sound system with easy setups.

The WSA-5TR-V2 providing premium-quality audio for stereo audio applications operating in the 5.2 / 5.8GHz bands, simply connect the transmitter module to your A/V processor, and the receiver to your powered subwoofer (or active speakers), the wireless connection help eliminate cable management and prevent unnecessary holes in the wall.

• ✅[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid to avoid and decrease possibility of interference from the wireless networks routers, cell phone, garage doors, R/Cs, and other 2.4G/5G WiFi network devices for near lossless audio and provides excellent transmission stability
• ✅[Quick and Easy Installation] The WSA-5TR-V2 prevents you from ever needing to worry about wires, It eliminates the hassle of connecting the transmitter to any existing stereo, home theatre system or any audio source. Giving you the ability to place powered subwoofer/speakers in distant best sounding location in your room and less cluttered. All you need is setup your powered subwoofer at its intended location with near the power outlet and you`re ready for enjoying the audio wirelessly.
• ✅[High Wireless Transmission Performance] Using the WSA-5TR-V2 would be no delays between audio and the film, and provide faster, more stable, better sound quality, latency reducing and less traffic. It also transmit at operating ranges for 100 feet in line of sight or 50 feet through walls, ceilings, and floors (audio transmission range/signal quality will be decreased based on environment).
• ✅[Premium Audio Output] Providing the premium-quality standard audio line level output digital format without audio compression (full CD quality) for stereo audio applications operating.
• ✅[Wide Transmission Range] - Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio.

Product features

For Best Subwoofer Placement Without Being Limited

Giving you the ability to place subs in distant corners, less cluttered and best sounding location in the room, all you need is setup the subwoofer at its intended location with the power outlet near the subwoofer and you`re ready for enjoying the bass wirelessly.

Plug & Play Functionality

The wireless Audio transmitter and the receiver had been paired before shipping, the WSA-5TR-V2 wireless subwoofer starter kit’s transmitter finds the receiver automatically once you connect it and turn it on the first time.

5.2 & 5.8GHz Dual-Band Selectable

Comes with the latest dual band as 5.2 / 5.8GHz wireless technology connection with total 62 channels auto selection from RF channel 5727~5848 (Blue color LED with 5.8G mode) & 44 RF channel 5157~ 5243 (Green color LED with 5.2G mode), to avoid and decrease possibility of interference from the wireless networks routers, cell phone, garage doors, R/Cs, and other 2.4G/5G WiFi network devices.

Connect with Powered Subwoofer

With this WSA-5TR-V2 subwoofer kit, it’s easier than ever to place your subwoofer in the right spot. You can relocate the sub to anywhere there’s an electrical outlet by wireless audio transmission.

Connect with Active/Powered Speakers

For users hoping to add stereo zone capability to an existing A/V installation, the WSA-5TR wireless speaker kit extends the options and uses of your primary audio system, connecting to the powered speakers to your patio, pool area, or anywhere you'd like to enjoy music away from your primary A/V system.

Connect with Passive Bookshelf Speakers

WSA-5TR-V2 will NOT works with Passive Bookshelf Speakers unless the wireless receiver has been connected with an additional local stereo amplifier to powered the passive speakers.

Product description

Package contents:

• 1 x PAM8403 amplifier on breakout board
• 2 x 4 ohm, 3 watt oval speakers
• 10 x Breakaway header pins for PAM8403 connection
• 1 x 50 cm (19 in) cord with 3.5 mm audio plug

Everything you need except a power supply to make speakers in one complete package!



Information

• Speakers - Sturdy steel construction with easy-to-solder lugs and 3.3 mm mounting holes. These speakers are often used in commercial flat screen monitors.
• PAM8403 - This top of the line class D amplifier mounted on a breakout board pairs perfectly with the speakers to provide great sound.
• Speaker specs:
  
  -4 ohm, 3 watt power
  
  -Wires already attached
  
  -31 mm wide, 70 mm high, 18 mm deep.
  
  -4 mounting holes, 3 mm diameter.
• PAM8403 specs:
  
  -Operation Voltage: 5V. Get power from USB supply, 3 AA batteries, or cell phone battery bank (power supply not included)
  
  -Output power: 3w + 3w (3 watts to each speaker)
  
  -Efficiency: up to 90%
  
  -Knob: smooth turning knob to adjust volume and turn unit on / off
  
  -Mounting: drill a hole and mount using the volume knob with the included nut and washer
  
  -Includes breakaway headers for connection, soldering required

Connections:

• Refer to diagram picture for wiring
• Note: do not connect (-) or (+) speaker connections together, this will damage the amplifier
• Note: do not apply power without speakers connected, this will damage the amplifier

• Updated version, quality is improved! Everything you need except a power supply for adding sound to a project.
• PAM8403 - Powerful and small Class D amplifier mounted on a 28 x 20 mm breakout board. Includes a super smooth potentiometer combination volume / on-off knob. Also includes header pins.
• Mini speakers - 2 pcs. 4 ohm, 3w, 31 mm x 70 mm. The same speakers found in flatscreen TV's and monitors.
• 3.5 mm cord - Includes 50 cm (19 in) headphone style cord and plug for easy phone or Raspberry Pi connection
• Easily power the kit with any 5V supply (not included): USB cell phone charger, 3 AA batteries, or a cell phone battery bank. Soldering required (header pins included). Do not apply power to the amplifier without speakers connected, this will result in damage to the amplifier.

User questions & answers

Question:	Two speakers implies stereo, but is it
Answer:	No It can not be turned off and on remotely. There is a switch on the Rocketfish to control volume and turn it off and on.
Question:	What is the speaker wire guage
Answer:	Yes. We use two of them for wireless rear speakers. Make sure the volume is turned up on the Rocketfish before calibrating.
Question:	Can the input be from a "Condenser Microphone Cartridge" or does it need to be powered source
Answer:	Yes. I have had this since 2006 connected my speakers to speaker output on amp. No delay and audio is equal to a direct connect to amp.
Question:	Will this work if I only hook up one of the speakers? It mentions not to power it on if speakers aren't connected so not sure if this will damage it
Answer:	If It's paired with front wired speakers, there can be minor delay between front and back.... The bigger issue is the quality of the sound between front and back.

Product description

This optional upgrade kit includes a receiver unit that links wirelessly to compatible LG sound bars, then connects to a pair of wall-mountable speakers (included) that can be placed behind the listener for true home theater surround audio. 2.0 channels (140 total watts - two speakers at 70W). Compatible LG sound bars include: SJK0Y, SK9Y, SK8Y, SK6Y, and SK5Y

• Surround sound expansion: the Spk8 add-on rear channel speakers (sound bar sold separately) can turn a living room into a home Theater
• Wireless connection: this Surround sound Kit is designed to Link wirelessly to the sound system for the ultimate in performance and simplicity
• Wall mountable: for even greater design flexibility, these speakers can also be unobtrusively wall-mounted, especially handy when there’s no Table or shelf nearby

User questions & answers

Question:	What screw size is required to mount the speakers
Answer:	Nik is correct, I went to my local hardware store with this speaker and tested until I found a match. The size is metric M4 and the thread holes (one backside midway up, one bottom in the middle) are about 1/2” deep, so take screw length into account when considering how thick your mounting plate and washer are. I am using a pretty thin metal mounting plate, a fender washer (which has a small hole inside a larger washer diameter) so I chose an M4 x 10, .70mm thread pitch went in nicely.
Question:	How long are the wires that come with the speakers? If not long enough, can I add length using standard speaker wire
Answer:	If the speaker wires for the LG SPK8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit are not long enough for where you would like to position the speakers, you can splice the wires. The speaker wire is either 16 gauge or 18 gauge wire that is available in spools of varying length...^IFV
Question:	What inputs does this support? Does it only work with paired LG sound bars
Answer:	It's a wireless receiver that only works with LG SL10Y, SL9Y, SL8Y, SL7Y, SL6Y, SL5Y, SL4Y, and SKM5Y soundbars. "G" variants of these with Google search should work as well. The speakers are connected to the receiver via standard 2-wire conductor cable.
Question:	What screw size is needed to mount the speakers
Answer:	Nik is correct, I went to my local hardware store with this speaker and tested until I found a match. The size is metric M4 and the thread holes (one backside midway up, one bottom in the middle) are about 1/2” deep, so take screw length into account when considering how thick your mounting plate and washer are. I am using a pretty thin metal mounting plate, a fender washer (which has a small hole inside a larger washer diameter) so I chose an M4 x 10, .70mm thread pitch went in nicely.

Product features

Surround Sound Expansion

LG sound bars can fill a room with thrilling, immersive virtual surround audio. But select models can also be upgraded to true surround sound via these add-on rear channel speakers (sound bar sold separately). Pair the LG Rear Speaker Kit to an SL10Y, SL9Y, SL8Y, SL7Y, SL6Y, SL5Y, SL4Y, SKM5Y sound bar for true home theater surround sound.

Wireless Connection

This easy to set up rear-channel speaker kit is designed to link wirelessly to the sound bar for enhanced surround sound performance.

Wall Mountable

For even greater design flexibility, these speakers can also be unobtrusively wall-mounted, especially handy when there’s no table or shelf nearby.

Note: Wall Mount Sold Separately.

Product description

Gravity 1/0 Gauge Power Amp Kit Up to 6500 Watts Premium Elite Pro Flexible RCA Speakers Wires , 250A + 300A Fuse Included , Complete Blue DIY Hobbyist AWG Amplifier Installation Wiring Included True sound 17 Feet FT double shielded RCA cable, high quality 17 feet FT / 18 GA turn-on cable & 20 feet FT / 16 GA speaker wire. To operate an amplifier, you must need a good quality kit including high quality stuffs. In this product you can find all necessary stuffs with high qualities. All items have good quality and durability. Quality wire that with a conductor size, A good fuse holder and power wire connectors that provide good electrical connections, Sufficient wire length, Good value and reasonable price are more characteristics. This wiring kit is mostly suitable for all kinds of vehicles. Our goal is customers happiness. Our customers are loving this wiring kit and we are getting positive response and reviews from them. Some specifications of this amp kit are:

High Quality Thick 17 Feet FT 0 Gauge GA Power Cable

Premium 3 Feet FT 0 Gauge GA Ground Cable / Inline ANL Fuse Holder & 250A + 300A Fuse Included!

True Sound 17 Feet FT Double Shielded RCA Cable

High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire

All Accessories / Terminal Included! Great for Car / Truck / Motorcycle / RV / ATV

• High Quality Thick 17 Feet FT 0 Gauge GA Power Cable
• Premium 3 Feet FT 0 Gauge GA Ground Cable / Inline ANL Fuse Holder & 250A + 300A Fuse Included!
• True Sound 17 Feet FT Double Shielded RCA Cable
• High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire
• All Accessories / Terminal Included! Great for Car / Truck / Motorcycle / RV / ATV

Product description

Make your existing speakers wireless with Amphony's speaker kit. Eliminate messy speaker cables in your room. This kit includes a wireless stereo amplifier that delivers 2x40 Watts power to any passive speakers.



The transmitter sends audio up to 300 feet (100 feet indoors) even through walls and ceilings. You'll get true CD quality with uncompressed better-than-Bluetooth digital wireless audio. The receiver has a power amplifier built in and connects directly to two passive loudspeakers. The built-in amplifier deliver the efficiency of regular class-D amplifiers at ultra-low audio distortion. A proprietary amplifier design ensures a linear frequency response regardless of the speaker load. It excels in amplifier listening tests.



The wireless amplifier measures only 5" x 3.5" x 2" and is easily mountable to a speaker.



The wireless transmission employs advanced adaptive frequency hopping. It avoids frequency channels occupied by other wireless devices and is highly robust against wireless interference.



The transmitter can send 2 audio channels to up to 4 wireless amplifiers. By using multiple transmitters you can create several audio zones in your house.



Specification

Transmitter:

• Audio transmission: Adaptive Frequency-hopping spread spectrum
• Transmitter frequency: 2.4 GHz
• Maximum number of wireless devices per transmitter: 4
• Transmitted data rate: 5 Mbps
• Transmitter operating range: max. 300 ft. line of sight, max. 100 ft. through walls

Wireless Amplifier:

• Output power: 2 x 40 Wrms
• Frequency response: 20 Hz - 20 kHz
• Signal-to-noise ratio: 91 dB (Transmitter / Amplifier, A-weighted)
• Total harmonic distortion: typ. 0.04 % @ 20 W
• Power efficiency: 90%

In the box

• 1 transmitter
• 1 wireless amplifier
• 2 AC adapters
• 2 speaker cables
• 1 RCA audio cable

• MAKES ANY SPEAKERS WIRELESS: Install rear surround speakers without long ugly speaker wires - comes with a stereo wireless amplifier rated at 2x40 Watts - the wireless transmitter connects to any analog audio output including amplified speaker outputs - ideal for connecting to surround sound receivers - works with any-brand home theater receiver - also great for installing speakers all over your house without drilling holes into your walls
• ADVANCED WIRELESS TECHNOLOGY: Stereo audio is transmitted in a digital format without audio compression (full CD quality) - free of static and interference - the wireless signal can travel through walls and ceilings to other rooms of your house - avoids interference by using adaptive frequency hopping - signal is not affected by wireless networks or cordless phones
• POWERFUL AMPLIFIER: The wireless receiver includes a 2x40-Watt power amplifier - proprietary amplifier design featuring linear frequency response and ultra low distortion regardless of the connected speaker load
• SUPER COMPACT: The wireless amplifier measures 5" x 3.5" x 2" only - easily hides away - mounting holes for attaching behind speakers - totally out of sight
• MULTI-ROOM CAPABLE: Transmitter can pair to up to 4 wireless amplifiers - multiple transmitters can be used within a home - create distinct audio zones - pairing is a simple push of a button - transmitter also works with iFinity wireless speakers - 100% Risk-free 1-year Manufacturer Warranty with responsive easy-to-reach Customer Service Support

User questions & answers

Question:	can you run this in your vehicle
Answer:	Yes, this is stereo.
Question:	How long/thick is the power cord for the receiver? The outlet is 5ft below where I want to put the amp and I want to hide the cord in the corner
Answer:	Don't buy these, works VERY poorly, get the small square round ones with the metal (silver) speaker cones, much better sounding and you can get better/smaller amp. 24g wire, with connector on end with pins too close together...
Question:	Do I need two receivers to enable a pair (two) of speakers wireless
Answer:	We have never tried to connect a condenser microphone cartridge directly to the amp. Most condenser microphones require some small amount of external power. This amplifier works well when connected to a device with enough output power to play sound through headphones.
Question:	If two speakers require a minimum of 40w each, will this unit be enough to drive both speakers sufficiently or will there be issues at higher volumes
Answer:	Great question! Yes, it will work fine with only one speaker hooked up (I just tested the kit I have set up to make sure). I will edit the description, thank you for your feedback.

Product description

Our portable speaker kit includes everything you need to build your own bluetooth speaker. Enjoy your favorite music straight from your phone (iPhone and Android compatible) or other Bluetooth compatible device. You'll have the most unique speaker around because it's built by YOU!



A perfect kit for the home, office, or education setting, the Kitables Bluetooth Speaker kit is a great introduction to music amplification and helps develop skills in the core disciplines of science, technology, engineering, and math!



es, some soldering is required for this kit, but don't let that scare you! Soldering is just gluing, where the glue is metal! Our kits are designed to be easy to assemble, yet still a true DIY experience. If you have experience soldering, you'll have no problem with this kit.



If you don't, this kit is an ideal and easy first project to learn on. Once you can solder, there's no limit to what you can make! And that's what Kitables is all about: inspiring people to be makers, tinkerers, and inventors.



Go ahead, see what you can build!





Soldering tools are NOT included, but can be bought inexpensively.

• CREATE YOUR OWN PORTABLE DANCE PARTY: Our portable speaker kit includes everything you need to build your own bluetooth speaker (NOTE: Soldering is required to put pieces together). Enjoy your favorite music straight from your phone (iPhone and Android compatible).
• PERFECT HOLIDAY GIFT: Fun, creative, and unique — your bluetooth speaker will be a hit this holiday season!
• GREAT FOR STEM TEACHING CURRICULUM: Our bluetooth speaker kit is a great introduction into music amplification and helps teach and encourage kids to to develop skills in the core disciplines of science, technology, engineering, and math.

User questions & answers

Question:	What are the dimensions of the switch and speakers
Answer:	Probably not. The receiver/amp requires 36 VDC which wouldn't normally be available in a vehicle(except maybe an electric car). You could probably rig a voltage regulator for the transmitter that only requires 7.5 VDC @ 1 amp.
Question:	Can i use only some of the parts? Im making my own speaker and just need the bluetooth and battery
Answer:	The power cord is around 5.9 feet long and the thickness is 3.5mmx1.5mm. So you should be good.
Question:	What age range would this be good for
Answer:	No, one receiver can handle two speakers (mine enables the use of both rear speakers).
Question:	Can the speaker connect to wi-fi and play from android
Answer:	There are a lot of variables in that question, but in general, this amp should be alright. If your speakers have inefficient drivers it may get warm or even begin to clip at higher volume levels. In the end, keep your expectations realistic. This is not a high end 200 watt per channel, wired amp. I am running it for my rear stage on a Samsung Blue ray combo and it is plenty loud for a surround channel. Overall a good sounding alternative to running wires. Much better than cheaper models like the Rocketfish brand.

Product features

About Kitables

We created kitables because: We are on a mission to create a world with more builders in it. Chances are you are or know a builder: they are everywhere from your local artist/writer to leading technology entrepreneurs. Builders solve problems.

We are: Builders who want to give others the confidence to build. A woman-owned Startup. In the business of making problem solvers. Not hung up on age requirements (or limits) and demographics

We offer: All inclusive project based DIY kits for a variety of projects everything from electronics, woodworking, even cooking. We take the guess work out of getting that parts and prices you need for your next DIY project and let you get to the fun part. Actually building it.

We believe: Building is Fun! Everyone has the ability to build (you may just not know it yet!), Education and Career paths should not determine who gets to build. All of us should focus more on exploration and problem solving.

Rock Out With The Kitables Bluetooth Speaker Kit

Our portable speaker kit includes everything you need to build your own bluetooth speaker. Enjoy your favorite music straight from your phone or other Bluetooth compatible device. You'll have the most unique speaker around because it's built by you.

Everything You Need to Complete Your Project

Laser Cut Wood Panels, Speakers, Amplifier, Bluetooth, Audio Adapter, Rechargeable Lipo Battery, Micro USB Charging Module, Switch, Wires.

Soldering is Required

Yes, some soldering is required for this kit, but don't let that scare you! Soldering is just gluing, where the glue is metal! Our kits are designed to be easy to assemble, yet still a true DIY experience. If you have experience soldering, you'll have no problem with this kit.

Product description

Elite Audio 8 Gauge 100% Copper Pro Amp Kit EA-PROK8 2500 Watt Complete OFC Amplifier Installation Wiring Kit w/ 20 feet 0 Ga Copper Wire, 2-Channel Copper RCA Interconnects, 12 Gauge OFC Speaker Wire

• 8 Gauge 100% Tinned Copper Wire – 17Ft Power & 3Ft Ground – High efficiency power delivery made using a hyper twisting technology process.
• 12 Gauge 100% tinned Copper Speaker Cable – 20 Ft for pure uninterrupted transfer of power and Signal
• Solid Brass ANL Fuse holder w/ satin gold finish – High capacity ANL Fuse for ideal protection for high powered systems.
• 17 Ft 2 Channel RCA Audio Interconnect with Triple-Shielded Armor, Quad Clamp Brass Copper Connectors & Copper Lead Drain Wire - Best Noise Cancelation RCA.
• Also Includes: 16 ft copper remote wire, 8 Ga Ring copper terminals, Ferrules, Heat Shrink Tubes, Butt connectors, Spade terminals, Zip ties, and 4 Input Battery Terminal.

User questions & answers

Question:	If i was to run 4 8inch 2 ohm subs would 0 gauge be over kill
Answer:	When assembled its about a 2x2in cube, the switch about .4x.2in. Its a smaller speaker makes it very portable and fits in your hand
Question:	Will this for sure come with everything in the video and in the description like the battery terminal and fuse and fuse holder for a 4 guage kit? Ty
Answer:	Yes use what you need if it fits your project
Question:	Is this true 0 gauge
Answer:	Good Question! It's really tough to put an exact age on any of our kits. This kit does require soldering, so some dexterity in order to handle a really hot piece of metal is needed and approval per the kiddo's parents. We've had an 8yo complete soldering tasks with no problem... and adults fully mess it up! The boards in this kit are pretty small, so you need some patience soldering those small joints. The rest is just following instructions (which we will update with clearer pictures soon). Hopefully in future iterations, we can put together an inexpensive solder free version!
Question:	Why does this say 4 guage and all the questions in here are Is this true 0 guage
Answer:	It connects via Bluetooth which both Android and Iphones have. It works with most devices with Bluetooth