12 best boss amp kits
Boss amp kits, also known as amplifier wiring kits or amplifier installation kits, are essential components for installing car audio amplifiers in a vehicle's sound system. These kits include various cables, wires, and accessories required to properly connect and power an amplifier, ensuring optimal performance and safety. Here is what you need to know about Boss amp kits:
Power and Ground Cables: These kits typically include thick power and ground cables designed to handle the electrical load required for the amplifier.The power cable connects the amplifier to the vehicle's battery, while the ground cable provides a secure grounding point.
RCA Cables: Boss amp kits often include RCA cables for transmitting audio signals from the car stereo's output to the amplifier's input. These cables help maintain signal quality and reduce interference.
Speaker Wire: Speaker wire is included to connect the amplifier to the speakers. The wire gauge and quality can vary depending on the kit's specifications.
Remote Turn-On Wire: A remote turn-on wire is included to trigger the amplifier to power on and off along with the car stereo. It is typically connected to a switched power source on the stereo unit.
Fuse and Fuse Holder: To protect the amplifier and the vehicle's electrical system from potential overloads or short circuits, an inline fuse and fuse holder are included in the kit. The fuse holder is usually installed near the battery.
Split Loom Tubing: Split loom tubing is provided to protect and organize the wires, reducing the risk of damage or interference.
Crimp Connectors and Ring Terminals: Various connectors and terminals are included to securely attach the wires to the amplifier, battery, and grounding points.
Wire Management Accessories: Some kits may include cable ties, grommets, and other accessories for neat and secure wire management during installation.
User Manual: A user manual or installation guide is often included to provide step-by-step instructions for safely and correctly connecting all the components.
Compatibility: It's essential to ensure that the Boss amp kit is compatible with the amplifier's power requirements and the vehicle's electrical system. Kits come in different sizes and configurations to accommodate various setups.
When using a Boss amp kit or any amplifier installation kit, it's crucial to follow the provided instructions carefully to ensure a safe and effective installation. Properly connecting the amplifier and using the included components can help prevent electrical issues and ensure that your car audio system delivers the best possible sound quality.
Below you can find our editor's choice of the best boss amp kits on the market
BOSS Audio Systems KIT2 8 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power To Your Radio, Subwoofers and Speakers
Product description
8 Gauge amplifier installation kit includes:
- 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
- 3 Foot - 8 Gauge Black Ground Cable
- 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
- 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
- (20) 4" Wire Ties, Rubber Grommets
- 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals
User questions & answers
| Question: | does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind |
| Answer: | It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :) |
| Question: | What gage is the speaker wire |
| Answer: | The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge. |
| Question: | How long is the rca patch cable |
| Answer: | 20 feet gold rca cable. It's long enough for me:) |
| Question: | how many watts |
| Answer: | 8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it. |
Product features
KIT2 Includes
BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
BOSS Audio Systems
Product description
BOSS Audio R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Monoblock, MOSFET Power Supply, Remote Subwoofer Control
- Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
- Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
- Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
User questions & answers
| Question: | Can you shut off the badge lights |
| Answer: | Not to my knowledge. Not unless you open it up and disconnect the power line feeding the light. |
| Question: | Por que tan caro el derecho de exportación |
| Answer: | lo traje a bogota colombian no por el servicio de mensajeria de amazon por que sale muy caro lo traje por un casillero virtual que ofrese la emresa 4-72 y salio por como por 30 dolares |
| Question: | Quiero una pero que sea de bajo 2000 Wats |
| Answer: | Ayuda mucho buscando el real sonido |
| Question: | Is these good for a Subaru tribecca 2007.? I will use 400 watts speakers |
| Answer: | Yes should work fine |
Product features
Let The BASS Take You To Another Place
Enjoy clear sound with the BOSS Audio Riot R1100MK Monoblock Class A/B Amplifier and 8-gauge wire installation kit. With 1100 Watts Max Power and MOSFET power supply, this 4-Ohm Amplifier provides clean sound to give your music an extra boost. The included amplifier installation kit gives you everything that you need to bring power to your subwoofer. Riot amplifiers are great for enhanced sound and performance for all 12V applications at an affordable price.
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Switchable Bass Boost
Switchable Bass Boost allows you to boost the low bass +18db.
Subwoofer Level Control
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Variable Input Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Complete 1500W Gravity 8 Gauge Amplifier Installation Wiring Kit Amp Pk3 8 Ga Red - for Installer and DIY Hobbyist - Perfect for Car/Truck/Motorcycle/Rv/ATV
Product description
Complete 1500W Gravity 8 gauge amplifier installation wiring kit amp Pk3 8 ga red - for installer and DIY hobbyist - perfect for car/truck/motorcycle/RV/ATV
- High quality thick 17 feet ft 8 gauge GA power cable
- Premium 3 feet ft 8 gauge GA ground cable/ inline agu fuse holder & 60a fuse included!
- True sound 17 feet ft Double shielded RCA cable
- High quality 17 feet ft/ 18 ga turn-on cable & 20 feet ft/ 16 ga speaker wire
- All accessories/ terminal included! Perfect for any installer shop, great for car/ truck/ motorcycle/ RV/ ATV
User questions & answers
| Question: | Were can i find a guide or instructions on how to use this hit |
| Answer: | Google wiring a car amp....it's pretty easy |
BOSS Audio Systems AR1500MK Car Amplifier and 8 Gauge Wiring Kit - 1500 Watts Max Power, 2/4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
- Wiring Installation Kit includes: 30 ft. speaker wire, 20 ft. 8 ga red power cable, 16 ft. 18 ga blue turn-on wire, 3 ft. 8 ga Black ground cable, competition quality fuse holder with agu fuse
- WIRING INSTALLATION KIT CONTINUED: 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
- Amplifier power: 1500 watts Max X 1 @2-ohms, 750 watts Max X 1 @4-ohms
- Class A/B topology: class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet power supply: a MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- SPECS: The AR1500M amplifier is 10. 3” x 6. 5” x 2. 6”, 7. 5 lbs.
- Variable low-pass Crossover: subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
User questions & answers
| Question: | Viene incluido con el controlador de subwoofer |
| Answer: | yes |
| Question: | im using my factory stereo, do i need a specific high/low converter for this Amp? if so, which one |
| Answer: | It looks like it should be the side that is actually the swivel of the screen: it looks like a latch. But the other side is what opens up. I was puzzled when I first tried and was glad I didn’t break it by continuing to open the false side. |
| Question: | Can this amp run 2 kenwood kfc-w3016ps 12-inch 2000w |
| Answer: | Can it be turned on when you plug in the wall charger? If it still doesn't work, please contact us for after-sales support, you may send an email to ‘[email protected]’ with your order ID. Thank you. |
| Question: | will this work on 2 12'' Pyle PLBW124 1,200-Watt DVC Subwoofer |
| Answer: | Yes, it does. The portable DVD comes with a canvas headrest mount holder. |
Product features
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Switchable Bass Boost
Switchable Bass Boost allows you to boost the low bass +18db.
Subwoofer Level Control
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Variable Input Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
BOSS AUDIO CX122 12" 1400W Car Power Subwoofer Sub + Mono Amplifier+ Amp Kit
Product description
Package includes: 2 Boss 12" Car Subwoofers 1 Boss Mono Amplifier 1 Amplifier Installation Kit Give your car's audio system extra bump with these Boss CX122 Subwoofers. Offering a 1400 watt max and a 700 watt RMS per sub, these Boss CX122 subs have a heavy stamped steel frame, single 4 Ohm voice coils and a custom tooled injected cone. The Boss CX122 subs have a mounting depth of 5.4" and are 12". The **Boss AR1500M** MONO class a/b amplifier features a MAX power of 1500 watts and a RMS power of 700 watts at 4 ohm. Other features include a MOSFET power supply, class A/B circuitry, 2 ohm stable and a low pass crossover. Also, includes a remote bass control. The BOSS AR1500M amplifier is the perfect amp to power your car audio system! Amplifier installation kit included!
- **Subwoofers:**
- NEW PAIR BOSS AUDIO CHAOS 12" 2800 WATT Car Subwoofers
- 1400 Watt MAX (2800 Watt PAIR)
- 700 Watt RMS (1400 Watt PAIR)
- Heavy Stamped Steel Frame
User questions & answers
| Question: | I just recieved my package and there is no subwoofers |
| Answer: | You need review your order again, if it's okay so call Amazon and let them know something is missing. |
| Question: | Does this fit 07 Subaru Impreza |
| Answer: | Im sure it would it fits nicely in my truck |
| Question: | I just got my kit in the mail, will the one amp will run both subs and i did not see the wire from the amp to the speckers |
| Answer: | The one amp will run both speaker it's a mono block amp so there will be only 2 terminal on the amp for speaker (+) (-)....unfortunately the kit comes with everything except for speaker wire |
| Question: | Will this fit a 2008 mission titan crew cab |
| Answer: | Yes |
BOSS R1004 400W 4-Channel RIOT Car Audio Power Amplifier Amp + 8 Gauge Complete Car Amplifier Installation Wiring Kit
Product description
The Boss R1004 4 channel amplifier features a MAX power handling of 400 watts and a RMS power handling of 50 watts. The Class A/B circuit design runs cooler and more efficiently with low distortion and high reliability. This class is intermediate between Class A and B, with the two active elements conducting more than half of the time which are best used for speakers. Other features include a Hi/Low pass crossover, a variable bass boost and is 2-ohm stable. Trimode Capable 2 Ohm Stable Signal to Noise Ratio: >95 dB KIT2 Complete your car audio set up with ease thanks to the included BOSS Audio Systems KIT2 8-Gauge Complete Car Amplifier Installation Wiring Kit. The Boss KIT2 8-Gauge Complete Car Amplifier Wiring Kit has everything your need to wire your car audio system. This wiring kit features a 20-foot, 8-gauge red power cable, competition high-quality fuse holder, 3-feet of 8-gauge black ground cable, 16-feet of 18-gauge blue turn-on wire, a 20-foot high-performance RCA interconnect, 30-feet of speaker wire, 6-feet of split loom tubing, (20) 4-inch wire ties, rubber grommets, a #10 ring terminal, a 5/16-inch ring terminal, and a 1/4-inch ring terminal. Give your car audio system the best wire available and get your system up and running with the BOSS KIT2 8-Gauge Complete Car Amplifier Wiring Kit.
- Boss Audio Riot R1004 400W 4 Channel Car Power Amplifier Amp Mosfet Transister
- RMS Power:
- 50 Watt x 4 Channel
- Max Power:
- 100 Watt x 4 Channel
Boss Audio Systems CPBK2 2 Farad 20-Volt LED Digital Voltage Car Audio Power Capacitor and 8 Gauge Car Audio Amplifier Installation Complete Kit
BOSS Audio Systems
Product description
Boss Audio CPBK2 2 Farad Car Capacity has an equivalent series resistant of 0.00195 Ohms at 120 Hz at 25 degrees C. This capacitor has a low level input voltage of 20V and a high input voltage of 24V. This is a remote terminal screw in capacity with dimensions of 10.3" x 3" x 3". Soundstorm AKS8 8 Gauge complete amplifier installation kit with RCA is included! Low Level Input Voltage: 20 Volts Remote Terminal Screw Equivalent Series Resistance (ESR): 0.00195 Ohms @ 120 Hz @ 25 Degrees C We are an authorized Boss dealer!
- POWER CAPACITOR: 2 Farad 20-Volt LED Digital Voltage Car Audio Power Capacitor; Capacitance: 2 farad, 2 million microfarad
- VOLTAGE: High level input voltage: 24; Low level input voltage: 20 volts; Red LED Digital Voltage Display
- AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload
- CAPACITOR SPECIFICATIONS: Percent capacitance tolerance: 10; Equivalent Series Resistance (ESR): 0.00195 ohms @ 120 Hz @ 25 degrees C; Remote terminal screw; Dimensions: 10.3 x 3 x 3 inches; Manufacturer warranty: 1-year warranty
- 8-GAUGE INSTALLATION WIRING KIT: Includes 20 foot 8 gauge red power cable, 3 foot 8 gauge black ground cable, and 30 foot speaker wire; 20, 4 inch wire ties, 0.25 inch gold plated ring terminal, Number 10 gold plated ring terminal, 0.31 inch gold plated ring terminal, Competition high quality fuse holder, 16 foot 18 gauge blue turn on wire, 20 foot high performance RCA interconnect, 3 rubber grommets
User questions & answers
| Question: | I have a 3000 Watt amplifier that is pushing to 15’s with the reserves of 1500 W each will this work |
| Answer: | Minimum 1 farad per 1000 watts RMS. You'll get better performance with 2 or 3 farad per 1000 watts RMS. |
| Question: | I have a 1200watt sub running on 1600watt amp and 600watt amp for my speakers will this be good enough |
| Answer: | Minimum 1 farad per 1000 watts RMS. You will see better better results with 2 or 3 farad per 1000 watts RMS. The larger the cap, the faster it gets ready for the amp's next big hit. For better results, you may need a 3 or 4 farad cap for the 1600 watt amp for the sub. The 1600 watt amp for your sub will need the cap, not your mid range 600 watt amp for your speakers. |
| Question: | Does the capacitor come with a mounting bracket |
| Answer: | Yes it does come with mounting bracket. I am using 4 gauge wire, and NOT the 8 gauge it comes with. |
| Question: | will this item work good with a 820w pioneer amp or is the gauge wire too big or will the capacitor over load the amp or do just fine |
| Answer: | Yes it will work but you don't need that big of one |
New BOSS R1100M 1100W Mono Car Audio Amplifier Amp + 8 Gauge Amp Wiring Kit
BOSS Audio Systems
Product description
The **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts! This Class A/B amplifier features a MOSFET power supply, an impedance of 2 ohms, a line output, low pass crossover, and an illuminated Boss logo. This package also includes the Boss KIT2 8 Gauge Ga Car Amplifier Amp Complete Kit Wiring Installation+RCA.
- **Amplifier:**
- NEW **BOSS R1100M** 1100W Mono Car Audio Amplifier + BOSS 8 Gauge Amp Wiring Kit
- 1100 Watt Max
- Max Power: 1100 Watt x 1 Channel @ 2 Ohm
- RMS Power: 250 Watt x 1 Channel @ 4 Ohm
User questions & answers
| Question: | would this work for a single 12 inch 300-600 watt sub |
| Answer: | Yes |
| Question: | Will this work with a 10" 300 watt RMS subwoofer |
| Answer: | Yes. I am running a 300 watt 10. It has a dial for on the fly Bass power adjustments too. |
| Question: | How hard is it to hook up the remote sub level control |
| Answer: | It's easy plug it in put 0-18db to 18db full to low and level all the way up sensitivity 2-8v to 8v and frequency adjust to you want that's it !! |
| Question: | This product needs capacitor?in case yes, how many farad? Thanks |
| Answer: | Its not a must |
SoundBox T4AW-R, 4 Gauge Amplifier Install Kit Complete Amp Wiring Cables, 3500W
Product description
General Features:
- Complete 4 Gauge Amplifier Install Kit
- Heat Resistant Wire Jacket
- Premium Heat Durability In-Line ANL Fuse Holder
- 4 Gauge Red SuperFlex Power Wire
- 4 Gauge Black SuperFlex Ground Wire
- Includes Speaker Wire & RCA Interconnects
- 18 Gauge Blue Remote Wire
- Heat Treated/Heat Resistant In-Line ANL Fuse Holder
- Pro Grade Black Wire Loom
- Installation Accessories
What's Included:
- 4 Gauge (Copper Clad Aluminum) Power Wire: 17 Feet
- 4 Gauge (Copper Clad Aluminum) Ground Wire: 3 Feet
- RCA Interconnect: 17 Feet
- 16 Gauge Speaker Wire: 17 Feet
- 18 Gauge Blue Remote Wire: 18 Feet
- In-Line ANL Fuse Holder
- Protective Black Wire Loom
- Installation Accessories/ Connectors
- Zip/Cable Ties
- Complete 4 Gauge Amplifier Install Kit
- Rated for Amplifiers Up To 3500 Watts Peak
- SuperFlex Wire Jacket for Easy Install
- Includes RCA Interconnect and Speaker Wire
- Heat Tested AGU Fuse Holder w/ Fuse
User questions & answers
| Question: | Does it include a fuse? What rating |
| Answer: | It does include a circut breaker inline from the battery. It's a big one. |
| Question: | Is the fuse inside the anl fuse holder? i cant find it in the packaging |
| Answer: | My soundbox came with one in fuse holder. They should have provided you with one. All I can say is reach out to the seller. |
SoundBox Connected 0 Gauge Amp Kit Amplifier Install Wiring Power Only 0 Ga Wire
Product description
General Features:
- Premium Quality 1/0 Gauge
- 4000 Watts Peak Power Rating
- Power Only Amplifier Install Kit
- SuperFlex Ultra Heat Resistant Wire Jacket
- Premium Heat Durability In-Line ANL Fuse Holder
- Authorized Internet Retailer
- 1 Year Manufactures's Warranty
What's Included:
- 1/0 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet
- 1/0 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
- 18 Gauge Blue Remote Wire: 18 Feet
- In-Line ANL Fuse Holder
- 200 Amp ANL Fuse
- 2- Positive (+) Red Ring Terminals
- 1- Negative (-) Black Ring Terminals
- 1- Positive (+) Spade Fork
- Installation Accessories/ Connectors
- Wire Ties/ Zip Ties: 8 PCS.
Please Note:
- Bulk Packaged, Not for Resale
- WIRE IS NOT AWG (AMERICAN WIRE GAUGE). SET TO INTERNATIONAL STANDARDS.
- 1/0 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet / Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
- 18 Gauge Blue Remote Wire: 18 Feet
- In-Line ANL Fuse Holder/ 180 Amp ANL Fuse
- 2- Positive (+) Red Ring Terminals / 1- Negative (-) Black Ring Terminals / Installation Accessories/ Connectors/ Wire Ties/ Zip Ties: 8 PCS.
- Wire Gauge Set To International Wire Gauge (Not AWG). Bulk Packaged. Not for Resale.
User questions & answers
| Question: | I have a 15 in sub 600w rms 1200w max and a 1800w amp 5chanel. What wire gauge do i use |
| Answer: | In my own experience 0gaugebis always the way to go with running a high watt amp it |
| Question: | Will this work for my two 12 at 4200w with a 1600w 2 chanel amp |
| Answer: | Kind of. The fuse wont let more than about 2500watts of power through from a car battery. Then again, your amplifier probably doesn't even have the capability of outputting that much power with the built in fuses |
| Question: | Can I hook this up to a 3000 watt power drive inverter in my semi truck |
| Answer: | Depends on how far your inverter is from your power source.. this is a zero gauge rated cable... im pushing a full 200 amp light system with mine with no issues.. hope it helps |
| Question: | Does it comes with the fuse |
| Answer: | Yes a 150 amp fuse. |
Pyle Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge), Blue (PLAM40)
Pyle
Product description
Pyle Model: PLAM40
Car Amp & Speaker Wiring Kit
Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge)
The Pyle Car Stereo Wiring Kit includes: 20' ft. 4 Gauge Red Power Wire, 4' ft. 4 Gauge Black Ground Wire, 20' ft. 16 Gauge Blue Remote Turn-On, 20' ft. 12 Gauge Stereo Speaker Wire, 20' ft. Stereo RCA Audio Cable (Male to Male), 6' ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, Ring Terminals: 4G, Spade Terminals: 4G, Spade Terminals: 16-18 Gauge, Butt Connectors, 20 Cable Ties, and Black Grommet.
- CAR AUDIO WIRING: Universal car stereo audio system cable and wire kit. Includes all necessary pieces to set up your amplifier and subwoofer speakers
- INCLUDED AUDIO CABLES: 20’ ft. 4 gauge red power wire, 4’ ft. 4 gauge black ground wire, 20’ ft. 16 gauge blue remote turn-on, 20’ ft. 12 gauge stereo speaker wire
- MORE AUDIO CONNECTION: 20’ ft. stereo RCA audio cable, 6’ ft. black split loom cable conduit - enables connection for amplifier and subwoofer speakers
- CAR STEREO SOUND: Also includes ring terminals 8G, spade terminals: 8G, spade terminals: 14-16G, butt connector, (20) cable ties, black grommet
- SOUND PROTECTION: Water-resistant in-line fuse holder along with an AGU type 60A gold plated fuse - suitable for car, boat, and mobile vehicle audio applications
User questions & answers
| Question: | will it hold up for 1600 watts |
| Answer: | Yes u can hook it up to 700 watt system. This kit can handle 1000 watt system. |
| Question: | Does it come with rca cables |
| Answer: | Yes it does but, it was only a 20 amp fuse. So, I bought one from BestBuy and it was a 30 amp fuse |
| Question: | I have a mono d 1600w amp and infinity kappa 1000 sub to install .does this kit come with all i need for this |
| Answer: | It works beautifully. It works as soon as you connected. Put fm radio on whatever station it tells you to find. I use 88.7 fm. Turn sound up on unit and regulate sound with your radio dial. IT WORKS. I LOVE IT. |
| Question: | is the power wire actually 4 ga wire |
| Answer: | mine did |
Product features
Pyle Car Stereo Wiring Kit
- 20ft. 4 Gauge Red Power Wire, 4ft. 4 Gauge Black Ground Wire
- 20ft. 16 Gauge Blue Remote Turn-On
- 20ft. 12 Gauge Stereo Speaker Wire
- 20ft. Stereo RCA Audio Cable (Male to Male)
- 6ft. Black Split Loom Cable Conduit
- AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder
- 2 Ring Terminals: 4G, 2 Spade Terminals: 4G
- 5 Spade Terminals: 16-18G
- 3 Butt Connectors, 20 Cable Ties
- 1 Black Grommet
20 Foot 4 Gauge Amp Kit Featuring 20% Oversized Cables - Complete 12V Audio Amplifier Installation & Wiring Kit
- 20 FT Red & 4 FT Black 20% Oversized CCA Power & Ground Cables
- 18FT Twisted & Shielded OFC RCA Cable with Machined Metal Connectors
- 100 Amp Mini-ANL Fuse & Heavy Duty Fuse Holder
- 13 FT of 10 AWG Red & Black CCA Speaker Wire, Blue Remote Turn-On Wire
- Pre-Crimped & Tinned Solid Copper Lugs, Gold Plated Spade Terminals, Firewall Grommet, Sheet Metal Screws, Zip Ties & 6 FT Split Loom Tubing (Not Pictured)
User questions & answers
| Question: | Is this product set an ofc or cca |
| Answer: | This is a CCA kit. |
| Question: | Does this include ground and rcas |
| Answer: | This is a complete amplifier wiring kit. It includes 20' blue OFC Power cable, 3' black OFC ground cable, 20' twisted & shielded OFC RCA cables, a 150 amp mini-ANL fuse, and an assortment of terminals and hardware. Please see the listing for complete details. |
| Question: | Will this work with a Class D amp that has 3000 watts |
| Answer: | Yes. I used this kit with a Pioneer class D 3000 watt amp. It works perfectly. Would definitely buy again. |
| Question: | What is the actual outside diameter of the wire |
| Answer: | The outside diameter of the cable is 11.5mm. The average diameter of the stands is 8.5mm with a 1.5mm jacket wall thickness. |
Product features
NEP 4 Gauge CCA Premium Kit
-
20 FT Red & 4 FT Black 20% Oversized CCA Power & Ground Cables
- 18FT Twisted & Shielded OFC RCA Cable with Machined Metal Connectors
- 100 Amp Mini-ANL Fuse & Heavy Duty Fuse Holder
- 13 FT of 10 AWG Red & Black CCA Speaker Wire, Blue Remote Turn-On Wire
- Pre-Crimped & Tinned Solid Copper Lugs, Gold Plated Spade Terminals, Firewall Grommet, Sheet Metal Screws, Zip Ties & 6 FT Split Loom Tubing (Not Pictured)
Power & Ground Cable Information
Solid Metal, Highly Shielded Premium RCA Cable
Latest Reviews
View all
Firewood Rack With Covers
- Updated: 29.05.2023
- Read reviews
Brace For Knee Pain
- Updated: 20.03.2023
- Read reviews
Goose Down Bed Pillows
- Updated: 04.05.2023
- Read reviews
3D Drawing Pens
- Updated: 06.04.2023
- Read reviews
Drill With Brushless Motors
- Updated: 10.07.2023
- Read reviews