10 best amp kits

Product description

General Features:

• SoundBoxComplete 4 Gauge Amplifier Kit 
• True American Wire Gauge standard (AWG) 
• SuperFlex Ultra Heat Resistant Wire Jacket 
• Premium Heat Durability In-Line ANL Fuse Holder 
• Number of Braided Strands: 7 
• Number of Strands per Braided Strands: 120 
• Number of Strands per Cable: 840 
• Outside Cable Diameter: 10.02mm 
• 1 Year Manufacturer's Warranty 
• Authorized Internet Dealer
  
  
• 20 Ft.- 4 Gauge Strand SuperFlex Green Power Wire/ 3 Ft.- 4 Gauge 840 Strand SuperFlex Black Ground Wire
• 18 Ft.- 14 Gauge Green SuperFlex Speaker Wire/ 18 Ft.- 18 Gauge Black Remote Turn-On Wire
• 18 Ft.- Green Triple Shielded RCA Interconnect Cable/ 4 Gauge Black Wire Loom
• Heat Tested, Water Resistent InLine ANL Fuse Holder/ 150 Amp ANL Fuse
• Connecting Terminals/ Wire Ties

• 20 Ft.- 4 Gauge Strand SuperFlex Green Power Wire/ 3 Ft.- 4 Gauge 840 Strand SuperFlex Black Ground Wire
• 18 Ft.- 14 Gauge Green SuperFlex Speaker Wire/ 18 Ft.- 18 Gauge Black Remote Turn-On Wire
• 18 Ft.- Green Triple Shielded RCA Interconnect Cable/ 4 Gauge Black Wire Loom
• Heat Tested, Water Resistent InLine ANL Fuse Holder/ 150 Amp ANL Fuse
• Connecting Terminals/ Wire Ties

User questions & answers

Question:	Which is positive and which is negative
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	Will this work with a 1200 watt amp .4 channel400 watt rms
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	Will this be ok for a 2800 watt/1400 rms amp with 2 12" subs? Or should I get the 0 gauge
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	Is the power wire all copper or copper clad aluminum
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

• 17 Feet 4 AWG 1862 Strands Ultra Flex Red CCA(Copper Clad Aluminum) Power Wire/3 Feet 4 AWG 1862 Strands Ultra Flex Black CCA Ground Wire
• 18 Feet 16 AWG CCA Speaker Wire/18 Ft.- 18 Gauge blue Remote Turn-On Wire
• One 17 Feet Black Bassik RCA Cable made from Oxygen Free Copper (OFC)
• Heat Tested, Water Resistent InLine Fuse Holder/ 80 Amp AGU fuse
• Connecting Terminals And Accessories

User questions & answers

Question:	Will this kit work for installing rockford fosgate pbr300x4 4 channel car amplifier
Answer:	Yes, everything is ready for installation.
Question:	Will this work on a 2000 watt amp
Answer:	12×18×4×6
Question:	Will this work on a 400watt marine amplifier
Answer:	Yes it will, I mount the amp on a side of the box. And it fit perfectly.
Question:	For how many watts is this kit good for
Answer:	I don’t really remember. Maybe like 12 or 15 feet.

Product features

POWER CABLE

17FT 4 AWG CCA POWER CABLE

ture awg second generation cca for maximum power delivery

3FT 4 AWG CCA GROUND CABLE

Completes circuit for unimpeded current flow

18FT 16AWG CCA SPEAKER CABLE

Transfer clear and powerful sound

17FT TWISTED OFC RCA CABLE

made from Oxygen Free Copper (OFC) rejects noise for clear sound

1 INLINE FUSE HOLDER WITH 80 AMP FUSE

For superior protection against electrical shorts

17FT 18 AWG TURN-ON WIRE

Remotely switches on amp

General Features:

Product description

The Install Centric ICAK8 True 8 Gauge 2-Channel Amplifier Wiring Kit is compatible with systems up to 680-Watt Max or 400-Watt RMS. Our kit is constructed with actual 8-gauge heavy-duty oxygen free copper and copper clad aluminum hybrid power cable for excellent conductivity, durability and value. The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and superior protection. The double strength ground terminal features unique, pre-terminated ground terminal design that dramatically simplifies installation and improves performance. The twisted pair RCA cables reject noise to provide a better sound performance. Includes: 16.5ft. of true 8-gauge OFC / CCA power cable, 2 ft. OFC / CCA ground cable,16 ft. twisted audio cable, 16 ft. remote turn-on wire,30 ft. speaker cable, maxi fuse holder with 50A fuse, Pre-terminated double-strength ground terminal, wire ties and amplifier terminals.

• TRUE 8 GAUGE OXYGEN FREE COPPER AND COPPER CLAD ALUMINUM HYBRID POWER CABLE: Our kit is constructed with actual 8-gauge heavy-duty oxygen free copper and copper clad aluminum Hybrid power cable for excellent conductivity, durability and value.
• IN-LINE FUSE HOLDERS: The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and superior protection.
• DOUBLE STRENGTH GROUND TERMINAL: A unique, pre-terminated ground terminal design that dramatically simplifies installation and improves performance.
• TWISTED PAIR AUDIO CABLES: The twisted pair RCA cables reject noise to provide a better sound performance.
• Includes: 16.5ft. of true 8 Gauge OFC / CCA power cable, 2 ft. OFC / CCA ground cable,16 ft. twisted audio cable, 16 ft. remote turn-on wire,30 ft. speaker cable, maxi fuse holder with 50A fuse, Pre-terminated double-strength ground terminal, wire ties and amplifier terminals; Lifetime Limited Warranty.

Product features

Install Centric ICAK8

The Install Centric ICAK8 8 Gauge 2-Channel Amplifier Wiring Kit is compatible with systems up to 680-Watt Max or 400-Watt RMS. Constructed with heavy-duty oxygen free copper and copper clad aluminum for excellent conductivity, durability and value. The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers. The double strength ground terminal features unique, pre-terminated ground terminal design that simplifies installation and improves performance. The twisted pair RCA cables reject noise to provide a better sound performance.

Product description

BOSS Audio Systems KIT10 4 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers

• 20 foot/ 4 gauge red power cable, high quality gold Plated competition agu fuse
• Gold plated agu in-line fuse holder, 3 foot/ 4 gauge black ground cable
• 16 foot/ 18 gauge Blue remote turn-on wire, 30 foot 16 gauge speaker wire
• 17 foot high performance RCA interconnect cable, 6 foot split loom tubing
• (20) 4" Wire ties, rubber grommets
• 5/16" Gold-plated ring terminals, 1/4" Gold-plated ring terminal, Gold-plated speaker terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	Yes, you may need an additional rca cord set depending if you bridge the channels or use all 4 channels.
Question:	What gage is the speaker wire
Answer:	Yes
Question:	How long is the rca patch cable
Answer:	Yes
Question:	how many watts
Answer:	I’m running 1200watts on a mono 1ohm amp.... I’d say you’d be good up to 2000

Product features

KIT10 Includes

Product description

Features:



Complete 4 Gauge Amp Install Kit

100% OFC(Oxygen Free Copper) RCA Cable

Strength,Flexibility and Heat Resistant Nylon Mesh Braiding for Power Wire

Premium Heat Durability In-Line AGU Fuse Holder and Cutting Indicator on the Power Wire for Easy Installation



What's Included:

AMP KIT INCLUDES



17ft. 4Ga CCA Power Wire With Nylon Mesh Braiding+ Ring Terminal – Matte Red

3ft. 4Ga CCA Ground Wire + Ring Terminal – Matte Black

17ft. 18Ga CCA Remote Turn-On wire – Blue

17ft. Twisted Pair OFC RCA Cable – Matte black

20ft. CCA Speaker Cable – Matte Red

MANL Fuse Holder + 80 AMP Fuse



ACCESSORY BAG INCLUDES



4Ga Nickel Plated Fork Terminals

16Ga Fork Terminals

16Ga Female Speaker Terminals

18Ga Fork Terminal

18Ga Butt Terminal

(10) 4”Black Wire Tires

4Ga Wire Grommet



PLEASE NOTE:



WIRE IS NOT AWG (AMERICAN WIRE GAUGE). SET TO INTERNATIONAL STANDARDS.

• True Spec CCA(Copper Clad Aluminum) 4 Gauge 17ft Power and 3ft Ground Wire with Ultra Flexible Automotive Grade PVC Jacket;
• 100% OFC(Oxygen Free Copper) 17ft RCA Cable for Premium Music Singal Tranmission with Dual Injectional Terminal;
• Power Wire with Black Nylon Mesh Braiding for Better in Strength,Flexibility and Heat Resistant. Pre -Terminated Power and Ground Wire for Easy Installation;
• Included 20ft CCA Speaker Wire,17ft Remote Turn-on Wire and Sufficient Terminals, Cable Tires and Other Accessories;
• Included 80AMP MANL Fuseholder and Cutting Indicator on the Power Wire for Easy Installation;

User questions & answers

Question:	What gauge would I need for 1000 watt amp
Answer:	4 gauge
Question:	Would it work on 1000 watt amp
Answer:	4awg can work for 500 to1000 watt amps. But at 1000 watts you'll be pushing its capabilities.
Question:	what gauge speaker wire is it
Answer:	16 gauge

• 17Ft Blue Soft Touch True 8 AWG CCA Power Wire
• 3Ft Black Soft Touch True 8 AWG CCA Ground Wire
• 20Ft Soft Touch 16 AWG CCA Speaker Wire,17Ft Soft Touch Twisted OFC RCA Cable
• 17Ft Soft Touch 18 Gauge Blue Remote Turn-On Wire,1 High Quality Competition Heated Tested In-Line Fuse Holder With 60 Amp Fuse
• 2 Ring Terminals(8 AWG),5 Spade Terminals(14-16GA),Wire Ties

User questions & answers

Question:	Does this amp kit include all wires and connectors to hook a amp and a sub to a Honda Accord
Answer:	It sure does comes with everything, including power wires, fuse holder, RCA cable, turn-on wire, speaker cable and all connectors.
Question:	Will this work on a 800 watt amp
Answer:	4 gauge would be better for a 800w amp
Question:	What wiring kit is recommended for the Chrysler 300 seeing that the battery is in the trunk
Answer:	Any of them instead of running it through the firewall to under the hood you would just run it under the carpet through the trunk like you would your subs
Question:	Is this kit worthless since its not copper,but copper clad aluminum
Answer:	No,great stuff, I have used it multiple times! It's cheaper due to the cost of copper being so high and yes technically it does not conduct electricity as well but for what you pay for. If you are not a crazy bass head and just looking to run a basic single amp system there is not better install kit out there in my opinion

Product features

POWER CABLE

17FT 8 AWG CCA POWER CABLE

ture awg second generation cca for maximum power delivery

3FT 8 AWG CCA GROUND CABLE

Completes circuit for unimpeded current flow

20FT 16AWG CCA SPEAKER CABLE

Transfer clear and powerful sound

17FT TWISTED OFC RCA CABLE

made from Oxygen Free Copper (OFC) rejects noise for clear sound

17FT 18 AWG TURN-ON WIRE

For superior protection against electrical shorts

17FT 18 AWG TURN-ON WIRE

Remotely switches on amp

General Features:

Product description

General Features: 

• Premium Quality 1/0 Gauge 
• 4000 Watts Peak Power Rating 
• Power Only Amplifier Install Kit 
• SuperFlex Ultra Heat Resistant Wire Jacket 
• Premium Heat Durability In-Line ANL Fuse Holder 
• Authorized Internet Retailer
• 1 Year Manufactures's Warranty 

What's Included: 

• 1/0 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet 
• 1/0 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet 
• 18 Gauge Blue Remote Wire: 18 Feet 
• In-Line ANL Fuse Holder 
• 200 Amp ANL Fuse 
• 2- Positive (+) Red Ring Terminals 
• 1- Negative (-) Black Ring Terminals 
• 1- Positive (+) Spade Fork 
• Installation Accessories/ Connectors 
• Wire Ties/ Zip Ties: 8 PCS.  

Please Note: 

• Bulk Packaged, Not for Resale 
• WIRE IS NOT AWG (AMERICAN WIRE GAUGE). SET TO INTERNATIONAL STANDARDS. 

• 1/0 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet / Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
• 18 Gauge Blue Remote Wire: 18 Feet
• In-Line ANL Fuse Holder/ 180 Amp ANL Fuse
• 2- Positive (+) Red Ring Terminals / 1- Negative (-) Black Ring Terminals / Installation Accessories/ Connectors/ Wire Ties/ Zip Ties: 8 PCS.
• Wire Gauge Set To International Wire Gauge (Not AWG). Bulk Packaged. Not for Resale.

User questions & answers

Question:	I have a 15 in sub 600w rms 1200w max and a 1800w amp 5chanel. What wire gauge do i use
Answer:	In my own experience 0gaugebis always the way to go with running a high watt amp it
Question:	Will this work for my two 12 at 4200w with a 1600w 2 chanel amp
Answer:	Kind of. The fuse wont let more than about 2500watts of power through from a car battery. Then again, your amplifier probably doesn't even have the capability of outputting that much power with the built in fuses
Question:	Can I hook this up to a 3000 watt power drive inverter in my semi truck
Answer:	Depends on how far your inverter is from your power source.. this is a zero gauge rated cable... im pushing a full 200 amp light system with mine with no issues.. hope it helps
Question:	Does it comes with the fuse
Answer:	Yes a 150 amp fuse.

Product description

Gravity 1/0 Gauge Power Amp Kit Up to 6500 Watts Premium Elite Pro Flexible RCA Speakers Wires , 250A + 300A Fuse Included , Complete Blue DIY Hobbyist AWG Amplifier Installation Wiring Included True sound 17 Feet FT double shielded RCA cable, high quality 17 feet FT / 18 GA turn-on cable & 20 feet FT / 16 GA speaker wire. To operate an amplifier, you must need a good quality kit including high quality stuffs. In this product you can find all necessary stuffs with high qualities. All items have good quality and durability. Quality wire that with a conductor size, A good fuse holder and power wire connectors that provide good electrical connections, Sufficient wire length, Good value and reasonable price are more characteristics. This wiring kit is mostly suitable for all kinds of vehicles. Our goal is customers happiness. Our customers are loving this wiring kit and we are getting positive response and reviews from them. Some specifications of this amp kit are:

High Quality Thick 17 Feet FT 0 Gauge GA Power Cable

Premium 3 Feet FT 0 Gauge GA Ground Cable / Inline ANL Fuse Holder & 250A + 300A Fuse Included!

True Sound 17 Feet FT Double Shielded RCA Cable

High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire

All Accessories / Terminal Included! Great for Car / Truck / Motorcycle / RV / ATV

• High Quality Thick 17 Feet FT 0 Gauge GA Power Cable
• Premium 3 Feet FT 0 Gauge GA Ground Cable / Inline ANL Fuse Holder & 250A + 300A Fuse Included!
• True Sound 17 Feet FT Double Shielded RCA Cable
• High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire
• All Accessories / Terminal Included! Great for Car / Truck / Motorcycle / RV / ATV

Product description

General Features: 

• SoundBox Connected Complete 8 Gauge Amplifier Install Kit 
• Heat Resistant Wire Jacket 
• Premium Heat Durability In-Line AGU Fuse Holder 
• 8 Gauge Red Power Wire 
• 8 Gauge Ground Wire 
• Silver/Black RCA Interconnect 
• 16 Gauge Speaker Wire 
• 18 Gauge Blue Remote Wire 
• Heat Treated/Heat Resistant In-Line AGU Fuse Holder 
• Pro Grade Black Wire Loom 
• Installation Accessories  
• Authorized Internet Retailer 
• 1 Year Manufacturer's Warranty 

What's Included: 

• 8 Gauge (Copper Clad Aluminum) Power Wire: 17 Feet 
• 8 Gauge (Copper Clad Aluminum) Ground Wire: 3 Feet 
• RCA Interconnect: 17 Feet 
• 16 Gauge Speaker Wire: 17 Feet 
• 18 Gauge Blue Remote Wire: 18 Feet 
• In-Line ANL Fuse Holder 
• 60 Amp ANL Fuse 
• Protective Black Wire Loom 
• Installation Accessories/ Connectors 
• Zip/Cable Ties  

Please Note: 

• Bulk Packaged. Not For Resale. 
• WIRE IS NOT AWG (AMERICAN WIRE GAUGE). SET TO INTERNATIONAL STANDARDS. 

• 17 Ft.- 8 Gauge (Copper Clad Aluminum) Power Wire/ 3 Ft.- 8 Gauge (Copper Clad Aluminum) Ground Wire
• 17 Ft.- 16 Gauge Speaker Wire/ 17 Ft.- 18 Gauge Blue Remote Turn-On Wire
• 17 Ft.- Triple Shielded RCA Interconnect Cable/ 8 Gauge Black Wire Loom
• Heated Tested In-Line AGU Fuse Holder/ 60 Amp AGU Fuse
• Connecting Terminals/ Wire Ties

User questions & answers

Question:	can it handle a 4000 watts amp
Answer:	As of now the maximum size is 128GB. We are working on the next generation to be able to support a higher capacity like 256GB. Let us know if you have any additional comments. We are here to support on your journey to select the best security floodlight camera .
Question:	Can this handle a 760 watt amp
Answer:	No, but you can buy a AV to HDMI converter for your WII system.
Question:	Can this kit handle a 2000 watt mono block
Answer:	I think it should I use it with Amazon fire stick all day. If Roku runs off the same wiring, shouldn't be any problem.
Question:	Can this handle a 1200watt amp and a 1200watt sub
Answer:	Yes you can! I'm using mine to connect a retro nintendo system to my new flat screen tv!

Product description

.Transparent red power cable,35X7X01.2MM, OD=6.0MM, CCA,4.5m=15feet .Transaprent black power cable,35x7X0.12MM,OD=6.0MM, CCA,0.7m=2.3feet .Blue remote wire 5m .Transparent blue RCA cable 4x0.12mm,OD=5MM. 4.5m .1 AGU fuse holder, 2 ring terminal, 2 spade terminal, 10pcs cable tie

• Transparent red power cable,35X7X0.12MM, OD=6.0MM, CCA,4.5m=15feet
• Transaprent black power cable,35x7x 0.12MM,OD=6.0MM, CCA,0.7m=2.3feet
• Blue remote wire 5m
• Transparent blue RCA cable 4x0.12mm,OD=5MM. 4.5m
• 1 AGU fuse holder, 2 ring terminal, 2 spade terminal, 10pcs cable tie

User questions & answers

Question:	Does it come with a fuse
Answer:	Yes. 40 amp
Question:	Would this work with a 125 watt amp
Answer:	Dear Sir, Yes, it can work with a 125 watt amp. Best regards, Kicki
Question:	Are these oxygen free copper wires
Answer:	No, they are not copper wires, they are aluminum wires with a thin plating of copper.
Question:	Are the red and black wires 35 ft long
Answer:	Red wire is less than 15 feet long. Black wire is just over 2 feet long.